@@ -2,6 +2,7 @@
armada-y := armada_crtc.o armada_drv.o armada_fb.o armada_fbdev.o \
armada_gem.o armada_overlay.o armada_plane.o armada_trace.o
armada-y += armada_510.o
+armada-y += armada_610.o
armada-$(CONFIG_DEBUG_FS) += armada_debugfs.o
obj-$(CONFIG_DRM_ARMADA) := armada.o
new file mode 100644
@@ -0,0 +1,143 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2012 Russell King
+ * Copyright (C) 2018,2019 Lubomir Rintel
+ * Largely based on Armada 510 support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Armada MMP2 variant support
+ */
+#include <linux/clk.h>
+#include <drm/drm_modes.h>
+#include <drm/drm_crtc.h>
+#include "armada_crtc.h"
+#include "armada_drm.h"
+#include "armada_hw.h"
+
+struct armada610_variant_data {
+ struct clk *clks[4];
+ struct clk *sel_clk;
+};
+
+static int armada610_crtc_init(struct armada_crtc *dcrtc, struct device *dev)
+{
+ struct armada610_variant_data *v;
+ struct property *prop;
+ struct clk *clk;
+ const char *s;
+ int idx;
+
+ v = devm_kzalloc(dev, sizeof(*v), GFP_KERNEL);
+ if (!v)
+ return -ENOMEM;
+
+ dcrtc->variant_data = v;
+
+ of_property_for_each_string(dev->of_node, "clock-names", prop, s) {
+ if (!strcmp(s, "ext_ref_clk0"))
+ idx = 0;
+ else if (!strcmp(s, "ext_ref_clk1"))
+ idx = 1;
+ else if (!strcmp(s, "plldivider"))
+ idx = 2;
+ else if (!strcmp(s, "axibus"))
+ idx = 3;
+ else
+ continue;
+
+ clk = devm_clk_get(dev, s);
+ if (IS_ERR(clk))
+ return PTR_ERR(clk) == -ENOENT ? -EPROBE_DEFER :
+ PTR_ERR(clk);
+ v->clks[idx] = clk;
+ }
+
+ return 0;
+}
+
+static const u32 armada610_clk_sels[] = {
+ SCLK_610_DISP0,
+ SCLK_610_DISP1,
+ SCLK_610_PLL,
+ SCLK_610_AXI,
+};
+
+static const struct armada_clocking_params armada610_clocking = {
+ /* HDMI requires -0.6%..+0.5% */
+ .permillage_min = 0,
+ .permillage_max = 2000,
+ .settable = BIT(0) | BIT(1),
+ .div_max = SCLK_610_INT_DIV_MASK,
+};
+
+/*
+ * This gets called with sclk = NULL to test whether the mode is
+ * supportable, and again with sclk != NULL to set the clocks up for
+ * that. The former can return an error, but the latter is expected
+ * not to.
+ */
+static int armada610_crtc_compute_clock(struct armada_crtc *dcrtc,
+ const struct drm_display_mode *mode, uint32_t *sclk)
+{
+ struct armada610_variant_data *v = dcrtc->variant_data;
+ unsigned long desired_khz = mode->crtc_clock;
+ struct armada_clk_result res;
+ int ret, idx;
+
+ idx = armada_crtc_select_clock(dcrtc, &res, &armada610_clocking,
+ v->clks, ARRAY_SIZE(v->clks),
+ desired_khz);
+ if (idx < 0)
+ return idx;
+
+ ret = clk_prepare_enable(res.clk);
+ if (ret)
+ return ret;
+
+ if (sclk) {
+ clk_set_rate(res.clk, res.desired_clk_hz);
+
+ *sclk = 0x00001000; /* No idea */
+ *sclk |= 1 << 8; /* MIPI clock bypass */
+ *sclk |= armada610_clk_sels[idx];
+ *sclk |= res.div;
+
+ /* We are now using this clock */
+ v->sel_clk = res.clk;
+ swap(dcrtc->clk, res.clk);
+ }
+
+ clk_disable_unprepare(res.clk);
+
+ return 0;
+}
+
+static void armada610_crtc_disable(struct armada_crtc *dcrtc)
+{
+ if (dcrtc->clk) {
+ clk_disable_unprepare(dcrtc->clk);
+ dcrtc->clk = NULL;
+ }
+}
+
+static void armada610_crtc_enable(struct armada_crtc *dcrtc,
+ const struct drm_display_mode *mode)
+{
+ struct armada610_variant_data *v = dcrtc->variant_data;
+
+ if (!dcrtc->clk && v->sel_clk) {
+ if (!WARN_ON(clk_prepare_enable(v->sel_clk)))
+ dcrtc->clk = v->sel_clk;
+ }
+}
+
+
+const struct armada_variant armada610_ops = {
+ .init = armada610_crtc_init,
+ .compute_clock = armada610_crtc_compute_clock,
+ .disable = armada610_crtc_disable,
+ .enable = armada610_crtc_enable,
+};
@@ -1104,6 +1104,10 @@ static const struct of_device_id armada_lcd_of_match[] = {
.compatible = "marvell,dove-lcd",
.data = &armada510_ops,
},
+ {
+ .compatible = "marvell,mmp2-lcd",
+ .data = &armada610_ops,
+ },
{}
};
MODULE_DEVICE_TABLE(of, armada_lcd_of_match);
@@ -52,6 +52,7 @@ struct armada_variant {
/* Variant ops */
extern const struct armada_variant armada510_ops;
+extern const struct armada_variant armada610_ops;
struct armada_private {
struct drm_device drm;
@@ -219,6 +219,16 @@ enum {
SCLK_510_FRAC_DIV_MASK = 0xfff << 16,
SCLK_510_INT_DIV_MASK = 0xffff << 0,
+ /* Armada 610 */
+ SCLK_610_AXI = 0x0 << 30,
+ SCLK_610_DISP0 = 0x1 << 30, /* LCD Display 1 */
+ SCLK_610_DISP1 = 0x2 << 30, /* LCD Display 2 */
+ SCLK_610_PLL = 0x3 << 30, /* HDMI PLL clock */
+ SCLK_610_PANEL_CLK_DIS = 0x1 << 28, /* 1 = panel clock disabled */
+ SCLK_610_FRAC_DIV_MASK = 0xfff << 16,
+ SCLK_610_MIPI_DIV_MASK = 0xf << 8, /* 0 = off, 1 = bypass, ... */
+ SCLK_610_INT_DIV_MASK = 0xff << 0,
+
/* Armada 16x */
SCLK_16X_AHB = 0x0 << 28,
SCLK_16X_PCLK = 0x1 << 28,
Heavily based on the Armada 510 (Dove) support. Tested to work well with Display 1 and Display 2 clocks driving the internal panel on the OLPC XO 1.75 laptop. Some tweaking might be required if anyone wants to use it with a MIPI or HDMI encoder. The data sheet is not available, but James Cameron of OLPC kindly provided some details about the LCD_SCLK_DIV register. Link: https://lists.freedesktop.org/archives/dri-devel/2018-December/201021.html Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> --- Applies on top of "drm-armada-devel" branch of git://git.armlinux.org.uk/~rmk/linux-arm.git Changes since v1: - Aligned with more recent Armada 510 support: using the same clock names and allowing for more flexible pixel clock source selection. drivers/gpu/drm/armada/Makefile | 1 + drivers/gpu/drm/armada/armada_610.c | 143 +++++++++++++++++++++++++++ drivers/gpu/drm/armada/armada_crtc.c | 4 + drivers/gpu/drm/armada/armada_drm.h | 1 + drivers/gpu/drm/armada/armada_hw.h | 10 ++ 5 files changed, 159 insertions(+) create mode 100644 drivers/gpu/drm/armada/armada_610.c