diff --git a/drivers/gpu/drm/drm_dp_helper.c b/drivers/gpu/drm/drm_dp_helper.c
index 54120b6319e7..54a6414c5d96 100644
--- a/drivers/gpu/drm/drm_dp_helper.c
+++ b/drivers/gpu/drm/drm_dp_helper.c
@@ -1360,7 +1360,20 @@ int drm_dp_read_desc(struct drm_dp_aux *aux, struct drm_dp_desc *desc,
 EXPORT_SYMBOL(drm_dp_read_desc);
 
 /**
- * DRM DP Helpers for DSC
+ * drm_dp_dsc_sink_max_slice_count() - Get the max slice count
+ * supported by the DSC sink.
+ * @dsc_dpcd: DSC capabilities from DPCD
+ * @is_edp: true if its eDP, false for DP
+ *
+ * Read the slice capabilities DPCD register from DSC sink to get
+ * the maximum slice count supported. This is used to populate
+ * the DSC parameters in the &struct drm_dsc_config by the driver.
+ * Driver creates an infoframe using these parameters to populate
+ * &struct drm_dsc_pps_infoframe. These are sent to the sink using DSC
+ * infoframe using the helper function drm_dsc_pps_infoframe_pack()
+ *
+ * Returns:
+ * Maximum slice count supported by DSC sink or 0 its invalid
  */
 u8 drm_dp_dsc_sink_max_slice_count(const u8 dsc_dpcd[DP_DSC_RECEIVER_CAP_SIZE],
 				   bool is_edp)
@@ -1405,6 +1418,21 @@ u8 drm_dp_dsc_sink_max_slice_count(const u8 dsc_dpcd[DP_DSC_RECEIVER_CAP_SIZE],
 }
 EXPORT_SYMBOL(drm_dp_dsc_sink_max_slice_count);
 
+/**
+ * drm_dp_dsc_sink_line_buf_depth() - Get the line buffer depth in bits
+ * @dsc_dpcd: DSC capabilities from DPCD
+ *
+ * Read the DSC DPCD register to parse the line buffer depth in bits which is
+ * number of bits of precision within the decoder line buffer supported by
+ * the DSC sink. This is used to populate the DSC parameters in the
+ * &struct drm_dsc_config by the driver.
+ * Driver creates an infoframe using these parameters to populate
+ * &struct drm_dsc_pps_infoframe. These are sent to the sink using DSC
+ * infoframe using the helper function drm_dsc_pps_infoframe_pack()
+ *
+ * Returns:
+ * Line buffer depth supported by DSC panel or 0 its invalid
+ */
 u8 drm_dp_dsc_sink_line_buf_depth(const u8 dsc_dpcd[DP_DSC_RECEIVER_CAP_SIZE])
 {
 	u8 line_buf_depth = dsc_dpcd[DP_DSC_LINE_BUF_BIT_DEPTH - DP_DSC_SUPPORT];
@@ -1434,6 +1462,23 @@ u8 drm_dp_dsc_sink_line_buf_depth(const u8 dsc_dpcd[DP_DSC_RECEIVER_CAP_SIZE])
 }
 EXPORT_SYMBOL(drm_dp_dsc_sink_line_buf_depth);
 
+/**
+ * drm_dp_dsc_sink_supported_input_bpcs() - Get all the input bits per component
+ * values supported by the DSC sink.
+ * @dsc_dpcd: DSC capabilities from DPCD
+ * @dsc_bpc: An array to be filled by this helper with supported
+ *           input bpcs.
+ *
+ * Read the DSC DPCD from the sink device to parse the supported bits per
+ * component values. This is used to populate the DSC parameters
+ * in the &struct drm_dsc_config by the driver.
+ * Driver creates an infoframe using these parameters to populate
+ * &struct drm_dsc_pps_infoframe. These are sent to the sink using DSC
+ * infoframe using the helper function drm_dsc_pps_infoframe_pack()
+ *
+ * Returns:
+ * Number of input BPC values parsed from the DPCD
+ */
 int drm_dp_dsc_sink_supported_input_bpcs(const u8 dsc_dpcd[DP_DSC_RECEIVER_CAP_SIZE],
 					 u8 dsc_bpc[3])
 {
diff --git a/drivers/gpu/drm/drm_dsc.c b/drivers/gpu/drm/drm_dsc.c
index bc2b23adb072..bce99f95c1a3 100644
--- a/drivers/gpu/drm/drm_dsc.c
+++ b/drivers/gpu/drm/drm_dsc.c
@@ -17,6 +17,12 @@
 /**
  * DOC: dsc helpers
  *
+ * VESA specification for DP 1.4 adds a new feature called Display Stream
+ * Compression (DSC) used to compress the pixel bits before sending it on
+ * DP/eDP/MIPI DSI interface. DSC is required to be enabled so that the existing
+ * display interfaces can support high resolutions at higher frames rates uisng
+ * the maximum available link capacity of these interfaces.
+ *
  * These functions contain some common logic and helpers to deal with VESA
  * Display Stream Compression standard required for DSC on Display Port/eDP or
  * MIPI display interfaces.
@@ -26,6 +32,13 @@
  * drm_dsc_dp_pps_header_init() - Initializes the PPS Header
  * for DisplayPort as per the DP 1.4 spec.
  * @pps_sdp: Secondary data packet for DSC Picture Parameter Set
+ *           as defined in &struct drm_dsc_pps_infoframe
+ *
+ * DP 1.4 spec defines the secondary data packet for sending the
+ * picture parameter infoframes from the source to the sink.
+ * This function populates the pps header defined in
+ * &struct drm_dsc_pps_infoframe as per the header bytes defined
+ * in &struct dp_sdp_header.
  */
 void drm_dsc_dp_pps_header_init(struct drm_dsc_pps_infoframe *pps_sdp)
 {
@@ -38,15 +51,20 @@ EXPORT_SYMBOL(drm_dsc_dp_pps_header_init);
 
 /**
  * drm_dsc_pps_infoframe_pack() - Populates the DSC PPS infoframe
- * using the DSC configuration parameters in the order expected
- * by the DSC Display Sink device. For the DSC, the sink device
- * expects the PPS payload in the big endian format for the fields
- * that span more than 1 byte.
  *
  * @pps_sdp:
- * Secondary data packet for DSC Picture Parameter Set
+ * Secondary data packet for DSC Picture Parameter Set. This is defined
+ * by &struct drm_dsc_pps_infoframe
  * @dsc_cfg:
- * DSC Configuration data filled by driver
+ * DSC Configuration data filled by driver as defined by
+ * &struct drm_dsc_config
+ *
+ * DSC source device sends a secondary data packet filled with all the
+ * picture parameter set (PPS) information required by the sink to decode
+ * the compressed frame. Driver populates the dsC PPS infoframe using the DSC
+ * configuration parameters in the order expected by the DSC Display Sink
+ * device. For the DSC, the sink device expects the PPS payload in the big
+ * endian format for the fields that span more than 1 byte.
  */
 void drm_dsc_pps_infoframe_pack(struct drm_dsc_pps_infoframe *pps_sdp,
 				const struct drm_dsc_config *dsc_cfg)
diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h
index 5db7fb8c8b50..2711cdfa0c13 100644
--- a/include/drm/drm_dp_helper.h
+++ b/include/drm/drm_dp_helper.h
@@ -1052,11 +1052,18 @@ int drm_dp_bw_code_to_link_rate(u8 link_bw);
 #define DP_SDP_VSC_EXT_CEA		0x21 /* DP 1.4 */
 /* 0x80+ CEA-861 infoframe types */
 
+/**
+ * struct dp_sdp_header - DP secondary data packet header
+ * @HB0: Secondary Data Packet ID
+ * @HB1: Secondary Data Packet Type
+ * @HB2: Secondary Data Packet Specific header, Byte 0
+ * @HB3: Secondary Data packet Specific header, Byte 1
+ */
 struct dp_sdp_header {
-	u8 HB0; /* Secondary Data Packet ID */
-	u8 HB1; /* Secondary Data Packet Type */
-	u8 HB2; /* Secondary Data Packet Specific header, Byte 0 */
-	u8 HB3; /* Secondary Data packet Specific header, Byte 1 */
+	u8 HB0;
+	u8 HB1;
+	u8 HB2;
+	u8 HB3;
 } __packed;
 
 #define EDP_SDP_HEADER_REVISION_MASK		0x1F
diff --git a/include/drm/drm_dsc.h b/include/drm/drm_dsc.h
index d03f1b83421a..8c6a18079086 100644
--- a/include/drm/drm_dsc.h
+++ b/include/drm/drm_dsc.h
@@ -44,111 +44,224 @@
 #define DSC_1_2_MAX_LINEBUF_DEPTH_VAL		0
 #define DSC_1_1_MAX_LINEBUF_DEPTH_BITS		13
 
-/* Configuration for a single Rate Control model range */
+/**
+ * struct drm_dsc_rc_range_parameters - DSC Rate Control range parameters
+ *
+ * This defines different rate control parameters used by the DSC engine
+ * to compress the frame.
+ */
 struct drm_dsc_rc_range_parameters {
-	/* Min Quantization Parameters allowed for this range */
+	/**
+	 * @range_min_qp:  Min Quantization Parameters allowed for this range
+	 */
 	u8 range_min_qp;
-	/* Max Quantization Parameters allowed for this range */
+	/**
+	 * @range_max_qp: Max Quantization Parameters allowed for this range
+	 */
 	u8 range_max_qp;
-	/* Bits/group offset to apply to target for this group */
+	/**
+	 * @range_bpg_offset: Bits/group offset to apply to target for this
+	 *                    group
+	 */
 	u8 range_bpg_offset;
 };
 
+/**
+ * struct drm_dsc_config - Parameters required to configure DSC
+ *
+ * Driver populates this structure with all the parameters required
+ * to configure the display stream compression on the source.
+ */
 struct drm_dsc_config {
-	/* Bits / component for previous reconstructed line buffer */
+	/**
+	 * @line_buf_depth: Bits / component for previous reconstructed line
+	 *                  buffer
+	 */
 	u8 line_buf_depth;
-	/* Bits per component to code (must be 8, 10, or 12) */
+	/**
+	 * @bits_per_component: Bits per component to code (8/10/12)
+	 */
 	u8 bits_per_component;
-	/*
-	 * Flag indicating to do RGB - YCoCg conversion
-	 * and back (should be 1 for RGB input)
+	/**
+	 * @convert_rgb: Flag to indicate if RGB - YCoCg conversion is needed
+	 *               True if RGB input, False if YCoCg input
 	 */
 	bool convert_rgb;
+	/**
+	 * @slice_count: Number fo slices per line used by the DSC encoder
+	 */
 	u8 slice_count;
-	/* Slice Width */
+	/**
+	 *  @slice_width: Width of each slice in pixels
+	 */
 	u16 slice_width;
-	/* Slice Height */
+	/**
+	 * @slice_height: Slice height in pixels
+	 */
 	u16 slice_height;
-	/*
-	 * 4:2:2 enable mode (from PPS, 4:2:2 conversion happens
-	 * outside of DSC encode/decode algorithm)
+	/**
+	 * @enable422: True for 4_2_2 sampling, false for 4_4_4 sampling
 	 */
 	bool enable422;
-	/* Picture Width */
+	/**
+	 * @pic_width: Width of the input display frame in pixels
+	 */
 	u16 pic_width;
-	/* Picture Height */
+	/**
+	 * @pic_height: Vertical height of the input display frame
+	 */
 	u16 pic_height;
-	/* Offset to bits/group used by RC to determine QP adjustment */
+	/**
+	 * @rc_tgt_offset_high: Offset to bits/group used by RC to determine QP
+	 *                      adjustment
+	 */
 	u8 rc_tgt_offset_high;
-	/* Offset to bits/group used by RC to determine QP adjustment */
+	/**
+	 * @rc_tgt_offset_low: Offset to bits/group used by RC to determine QP
+	 *                     adjustment
+	 */
 	u8 rc_tgt_offset_low;
-	/* Bits/pixel target << 4 (ie., 4 fractional bits) */
+	/**
+	 * @bits_per_pixel: Target bits per pixel with 4 fractional bits.
+	 *                   bits_per_pixel << 4
+	 */
 	u16 bits_per_pixel;
-	/*
-	 * Factor to determine if an edge is present based
-	 * on the bits produced
+	/**
+	 * @rc_edge_factor: Factor to determine if an edge is present based on the
+	 *                  bits produced
 	 */
 	u8 rc_edge_factor;
-	/* Slow down incrementing once the range reaches this value */
+	/**
+	 * @rc_quant_incr_limit1: Slow down incrementing once the range reaches this
+	 *                        value
+	 */
 	u8 rc_quant_incr_limit1;
-	/* Slow down incrementing once the range reaches this value */
+	/**
+	 * @rc_quant_incr_limit0: Slow down incrementing once the range reaches this
+	 *                        value
+	 */
 	u8 rc_quant_incr_limit0;
-	/* Number of pixels to delay the initial transmission */
+	/**
+	 * @initial_xmit_delay: Number of pixels to delay the initial transmission
+	 */
 	u16 initial_xmit_delay;
-	/* Number of pixels to delay the VLD on the decoder,not including SSM */
+	/**
+	 * @initial_dec_delay: Initial decoder delay, number of pixel times that the
+	 *                     decoer accumulates data in its rate buffer before
+	 *                     starting to decode and output pixels.
+	 */
 	u16  initial_dec_delay;
-	/* Block prediction enable */
+	/**
+	 * @block_pred_enable: True if block prediction is used to code any groups
+	 *                     within the picture.
+	 *                     False if BP not used
+	 */
 	bool block_pred_enable;
-	/* Bits/group offset to use for first line of the slice */
+	/**
+	 * @first_line_bpg_offset: Number of additional bits allocated for each group on
+	 *                         the first line of slice.
+	 */
 	u8 first_line_bpg_offset;
-	/* Value to use for RC model offset at slice start */
+	/**
+	 * @initial_offset: Value to use for RC model offset at slice start
+	 */
 	u16 initial_offset;
-	/* Thresholds defining each of the buffer ranges */
+	/**
+	 * @rc_buf_thresh: Thresholds defining each of the buffer ranges
+	 */
 	u16 rc_buf_thresh[DSC_NUM_BUF_RANGES - 1];
-	/* Parameters for each of the RC ranges */
+	/**
+	 * @rc_range_params: Parameters for each of the RC ranges defined in
+	 *                   &struct drm_dsc_rc_range_parameters
+	 */
 	struct drm_dsc_rc_range_parameters rc_range_params[DSC_NUM_BUF_RANGES];
-	/* Total size of RC model */
+	/**
+	 * @rc_model_size: Total size of RC model
+	 */
 	u16 rc_model_size;
-	/* Minimum QP where flatness information is sent */
+	/**
+	 * @flatness_min_qp: Minimum QP where flatness information is sent
+	 */
 	u8 flatness_min_qp;
-	/* Maximum QP where flatness information is sent */
+	/**
+	 * @flatness_max_qp: Maximum QP where flatness information is sent
+	 */
 	u8 flatness_max_qp;
-	/* Initial value for scale factor */
+	/**
+	 * @initial_scale_value: Initial value for the scale factor
+	 */
 	u8 initial_scale_value;
-	/* Decrement scale factor every scale_decrement_interval groups */
+	/**
+	 * @scale_decrement_interval: Specifies number of group times between
+	 *                            decrementing the scale factor at beginning
+	 *                            of a slice.
+	 */
 	u16 scale_decrement_interval;
-	/* Increment scale factor every scale_increment_interval groups */
+	/**
+	 * @scale_increment_interval: Number of group times between incrementing
+	 *                            the scale factor value used at the beginning
+	 *                            of a slice.
+	 */
 	u16 scale_increment_interval;
-	/* Non-first line BPG offset to use */
+	/**
+	 * @nfl_bpg_offset: Non first line BPG offset to be used
+	 */
 	u16 nfl_bpg_offset;
-	/* BPG offset used to enforce slice bit */
+	/**
+	 * @slice_bpg_offset: BPG offset used to enforce slice bit
+	 */
 	u16 slice_bpg_offset;
-	/* Final RC linear transformation offset value */
+	/**
+	 * @final_offset: Final RC linear transformation offset value
+	 */
 	u16 final_offset;
-	/* Enable on-off VBR (ie., disable stuffing bits) */
+	/**
+	 * @vbr_enable: True if VBR mode is enabled, false if disabled
+	 */
 	bool vbr_enable;
-	/* Mux word size (in bits) for SSM mode */
+	/**
+	 * @mux_word_size: Mux word size (in bits) for SSM mode
+	 */
 	u8 mux_word_size;
-	/*
-	 * The (max) size in bytes of the "chunks" that are
-	 * used in slice multiplexing
+	/**
+	 * @slice_chunk_size: The (max) size in bytes of the "chunks" that are
+	 *                    used in slice multiplexing.
 	 */
 	u16 slice_chunk_size;
-	/* Rate Control buffer siz in bits */
+	/**
+	 * @rc_bits: Rate control buffer size in bits
+	 */
 	u16 rc_bits;
-	/* DSC Minor Version */
+	/**
+	 * @dsc_version_minor: DSC minor version
+	 */
 	u8 dsc_version_minor;
-	/* DSC Major version */
+	/**
+	 * @dsc_version_major: DSC major version
+	 */
 	u8 dsc_version_major;
-	/* Native 4:2:2 support */
+	/**
+	 * @native_422: True if Native 4:2:2 supported, else false
+	 */
 	bool native_422;
-	/* Native 4:2:0 support */
+	/**
+	 * @native_420: True if Native 4:2:0 supported else false.
+	 */
 	bool native_420;
-	/* Additional bits/grp for seconnd line of slice for native 4:2:0 */
+	/**
+	 * @second_line_bpg_offset: Additional bits/grp for seconnd line of slice for
+	 *                          native 4:2:0
+	 */
 	u8 second_line_bpg_offset;
-	/* Num of bits deallocated for each grp that is not in second line of slice */
+	/**
+	 * @nsl_bpg_offset: Num of bits deallocated for each grp that is not in second
+	 *                  line of slice
+	 */
 	u16 nsl_bpg_offset;
-	/* Offset adj fr second line in Native 4:2:0 mode */
+	/**
+	 * @second_line_offset_adj: Offset adjustment for second line in Native 4:2:0
+	 *                          mode
+	 */
 	u16 second_line_offset_adj;
 };
 
@@ -468,10 +581,13 @@ struct drm_dsc_picture_parameter_set {
  * This structure represents the DSC PPS infoframe required to send the Picture
  * Parameter Set metadata required before enabling VESA Display Stream
  * Compression. This is based on the DP Secondary Data Packet structure and
- * comprises of SDP Header as defined in drm_dp_helper.h and PPS payload.
+ * comprises of SDP Header as defined &struct struct dp_sdp_header in drm_dp_helper.h
+ * and PPS payload defined in &struct drm_dsc_picture_parameter_set.
  *
- * @pps_header: Header for PPS as per DP SDP header format
+ * @pps_header: Header for PPS as per DP SDP header format of type
+ *              &struct dp_sdp_header
  * @pps_payload: PPS payload fields as per DSC specification Table 4-1
+ *               as represented in &struct drm_dsc_picture_parameter_set
  */
 struct drm_dsc_pps_infoframe {
 	struct dp_sdp_header pps_header;
