diff mbox series

[v3,6/6] ARM: dts: qcom: msm8974-hammerhead: add support for display

Message ID 20190531094619.31704-7-masneyb@onstation.org (mailing list archive)
State New, archived
Headers show
Series ARM: qcom: working Nexus 5 display support | expand

Commit Message

Brian Masney May 31, 2019, 9:46 a.m. UTC
Add initial support for the display found on the LG Nexus 5 (hammerhead)
phone. This is based on work from Jonathan Marek.

Signed-off-by: Brian Masney <masneyb@onstation.org>
---
 .../qcom-msm8974-lge-nexus5-hammerhead.dts    | 58 +++++++++++++++++++
 1 file changed, 58 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
index 51889d66b55a..4776f01f492c 100644
--- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
@@ -332,6 +332,16 @@ 
 				function = "gpio";
 			};
 		};
+
+		panel_pin: panel {
+			te {
+				pins = "gpio12";
+				function = "mdp_vsync";
+
+				drive-strength = <2>;
+				bias-disable;
+			};
+		};
 	};
 
 	vibrator@fd8c3450 {
@@ -531,6 +541,54 @@ 
 			};
 		};
 	};
+
+	mdss@fd900000 {
+		status = "ok";
+
+		mdp@fd900000 {
+			status = "ok";
+		};
+
+		dsi@fd922800 {
+			status = "ok";
+
+			vdda-supply = <&pm8941_l2>;
+			vdd-supply = <&pm8941_lvs3>;
+			vddio-supply = <&pm8941_l12>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ports {
+				port@1 {
+					endpoint {
+						remote-endpoint = <&panel_in>;
+						data-lanes = <0 1 2 3>;
+					};
+				};
+			};
+
+			panel: panel@0 {
+				reg = <0>;
+				compatible = "lg,acx467akm-7";
+
+				pinctrl-names = "default";
+				pinctrl-0 = <&panel_pin>;
+
+				port {
+					panel_in: endpoint {
+						remote-endpoint = <&dsi0_out>;
+					};
+				};
+			};
+		};
+
+		dsi-phy@fd922a00 {
+			status = "ok";
+
+			vddio-supply = <&pm8941_l12>;
+		};
+	};
 };
 
 &spmi_bus {