@@ -59,6 +59,11 @@
cpu0-supply = <&buck2_reg>;
};
+&gpu {
+ mali-supply = <&buck3_reg>;
+ status = "okay";
+};
+
&i2c_0 {
#address-cells = <1>;
#size-cells = <0>;
@@ -172,6 +172,11 @@
status = "okay";
};
+&gpu {
+ mali-supply = <&buck3_reg>;
+ status = "okay";
+};
+
&hsotg {
vusb_d-supply = <&ldo15_reg>;
vusb_a-supply = <&ldo12_reg>;
@@ -244,6 +244,11 @@
};
};
+&gpu {
+ mali-supply = <&buck3_reg>;
+ status = "okay";
+};
+
&i2c_0 {
#address-cells = <1>;
#size-cells = <0>;
@@ -126,6 +126,39 @@
};
};
+ gpu: gpu@13000000 {
+ compatible = "samsung,exynos3250-mali", "arm,mali-400";
+ reg = <0x13000000 0x10000>;
+ interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "gp",
+ "gpmmu",
+ "pp0",
+ "ppmmu0",
+ "pp1",
+ "ppmmu1",
+ "pp2",
+ "ppmmu2",
+ "pp3",
+ "ppmmu3",
+ "pmu";
+ clocks = <&cmu CLK_ASYNC_G3D>,
+ <&cmu CLK_SCLK_G3D>;
+ clock-names = "bus", "core";
+ power-domains = <&pd_g3d>;
+ status = "disabled";
+ /* TODO: operating points for DVFS */
+ };
+
pmu {
compatible = "arm,cortex-a7-pmu";
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
Add nodes for GPU (Mali 400) to Exynos3250. This is still limited and not tested: 1. No dynamic voltage and frequency scaling, 2. Not sure what to do with CLK_G3D clock responsible for gating entire IP block (it is now being disabled as unused). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> --- arch/arm/boot/dts/exynos3250-artik5.dtsi | 5 ++++ arch/arm/boot/dts/exynos3250-monk.dts | 5 ++++ arch/arm/boot/dts/exynos3250-rinato.dts | 5 ++++ arch/arm/boot/dts/exynos3250.dtsi | 33 ++++++++++++++++++++++++ 4 files changed, 48 insertions(+)