From patchwork Mon Jun 24 21:56:36 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: "Rob Herring (Arm)" X-Patchwork-Id: 11014199 Return-Path: Received: from mail.wl.linuxfoundation.org (pdx-wl-mail.web.codeaurora.org [172.30.200.125]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 2F42314BB for ; Mon, 24 Jun 2019 21:59:00 +0000 (UTC) Received: from mail.wl.linuxfoundation.org (localhost [127.0.0.1]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 1A41E1FFB1 for ; Mon, 24 Jun 2019 21:59:00 +0000 (UTC) Received: by mail.wl.linuxfoundation.org (Postfix, from userid 486) id 0D80D2880B; Mon, 24 Jun 2019 21:59:00 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on pdx-wl-mail.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-5.2 required=2.0 tests=BAYES_00,MAILING_LIST_MULTI, RCVD_IN_DNSWL_MED autolearn=ham version=3.3.1 Received: from gabe.freedesktop.org (gabe.freedesktop.org [131.252.210.177]) (using TLSv1.2 with cipher DHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.wl.linuxfoundation.org (Postfix) with ESMTPS id 0CA221FFB1 for ; Mon, 24 Jun 2019 21:58:58 +0000 (UTC) Received: from gabe.freedesktop.org (localhost [127.0.0.1]) by gabe.freedesktop.org (Postfix) with ESMTP id C9AFF89DD3; Mon, 24 Jun 2019 21:58:57 +0000 (UTC) X-Original-To: dri-devel@lists.freedesktop.org Delivered-To: dri-devel@lists.freedesktop.org Received: from mail-io1-f66.google.com (mail-io1-f66.google.com [209.85.166.66]) by gabe.freedesktop.org (Postfix) with ESMTPS id 1DE3E89DD3 for ; Mon, 24 Jun 2019 21:58:56 +0000 (UTC) Received: by mail-io1-f66.google.com with SMTP id w25so5015883ioc.8 for ; Mon, 24 Jun 2019 14:58:56 -0700 (PDT) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=ID9V3N/+8SxVffaUkEE/O3htUObL21XTrwW4Ch4Bw6U=; b=gYAlZx/Ri1aF1v2+wvd7B7LSOol3ByxX7Pqb/C/EiEyTTett53z+fMt1IX4+gmivvc IGIdcbK7ad24bU1PTlnnihigAI42HcYrDLvuo9Ko4lo4DjhpXlyuBP+mVXKYTEPRxaHi O6NEO9oNZQf47jU4wS9rM0ks0DeEEeMUJJSGlb76Et6LhQh0ZLaUQ7i5w4aFSCeIH1ye m1NDwZ5bEK78SwvzUSadsrX31Z4hmkOE8N2AuYzD7hKa8WCVeFb48nqaN4vMkxlgvTMi /XiPDAvAhq7ZRV2JBiID+dT+pu9r06DR8e5bWKwLp+0NFY2Iz6p5NAy93Tj3BUiM+GEV XTBg== X-Gm-Message-State: APjAAAXebaSMf8ldkxybKCwSnlhQJOPxMeYiV2+wa7PkFqK2S0hu2ppG jJANI4a9HZXyE1dPrv/2uYQ2yWU= X-Google-Smtp-Source: APXvYqwrrM+5eKTpDs0epXOjo5zR4SKKZjfmShWHVkqU/6dEkxoDvOZlRvIl0m/QhA1JVEUxypBUTw== X-Received: by 2002:a6b:f910:: with SMTP id j16mr17965933iog.256.1561413535021; Mon, 24 Jun 2019 14:58:55 -0700 (PDT) Received: from localhost.localdomain ([64.188.179.247]) by smtp.googlemail.com with ESMTPSA id l5sm14717301ioq.83.2019.06.24.14.58.53 (version=TLS1_3 cipher=AEAD-AES256-GCM-SHA384 bits=256/256); Mon, 24 Jun 2019 14:58:54 -0700 (PDT) From: Rob Herring To: dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org Subject: [PATCH v2 02/15] dt-bindings: display: Convert common panel bindings to DT schema Date: Mon, 24 Jun 2019 15:56:36 -0600 Message-Id: <20190624215649.8939-3-robh@kernel.org> X-Mailer: git-send-email 2.20.1 In-Reply-To: <20190624215649.8939-1-robh@kernel.org> References: <20190624215649.8939-1-robh@kernel.org> MIME-Version: 1.0 X-BeenThere: dri-devel@lists.freedesktop.org X-Mailman-Version: 2.1.23 Precedence: list List-Id: Direct Rendering Infrastructure - Development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: Maxime Ripard , linux-kernel@vger.kernel.org, Thierry Reding , Laurent Pinchart , Thierry Reding , Sam Ravnborg Errors-To: dri-devel-bounces@lists.freedesktop.org Sender: "dri-devel" X-Virus-Scanned: ClamAV using ClamSMTP Convert the common panel bindings to DT schema consolidating scattered definitions to a single schema file. The 'simple-panel' binding just a collection of properties and not a complete binding itself. All of the 'simple-panel' properties are covered by the panel-common.txt binding with the exception of the 'no-hpd' property, so add that to the schema. As there are lots of references to simple-panel.txt, just keep the file with a reference to common.yaml for now until all the bindings are converted. Cc: Thierry Reding Cc: Laurent Pinchart Cc: dri-devel@lists.freedesktop.org Acked-by: Sam Ravnborg Reviewed-by: Maxime Ripard Reviewed-by: Thierry Reding Signed-off-by: Rob Herring --- .../display/panel/arm,versatile-tft-panel.txt | 2 +- .../bindings/display/panel/panel-common.txt | 101 ------------ .../bindings/display/panel/panel-common.yaml | 149 ++++++++++++++++++ .../bindings/display/panel/panel.txt | 4 - .../bindings/display/panel/simple-panel.txt | 29 +--- 5 files changed, 151 insertions(+), 134 deletions(-) delete mode 100644 Documentation/devicetree/bindings/display/panel/panel-common.txt create mode 100644 Documentation/devicetree/bindings/display/panel/panel-common.yaml delete mode 100644 Documentation/devicetree/bindings/display/panel/panel.txt diff --git a/Documentation/devicetree/bindings/display/panel/arm,versatile-tft-panel.txt b/Documentation/devicetree/bindings/display/panel/arm,versatile-tft-panel.txt index 248141c3c7e3..0601a9e34703 100644 --- a/Documentation/devicetree/bindings/display/panel/arm,versatile-tft-panel.txt +++ b/Documentation/devicetree/bindings/display/panel/arm,versatile-tft-panel.txt @@ -10,7 +10,7 @@ Required properties: - compatible: should be "arm,versatile-tft-panel" Required subnodes: -- port: see display/panel/panel-common.txt, graph.txt +- port: see display/panel/panel-common.yaml, graph.txt Example: diff --git a/Documentation/devicetree/bindings/display/panel/panel-common.txt b/Documentation/devicetree/bindings/display/panel/panel-common.txt deleted file mode 100644 index 5d2519af4bb5..000000000000 --- a/Documentation/devicetree/bindings/display/panel/panel-common.txt +++ /dev/null @@ -1,101 +0,0 @@ -Common Properties for Display Panel -=================================== - -This document defines device tree properties common to several classes of -display panels. It doesn't constitue a device tree binding specification by -itself but is meant to be referenced by device tree bindings. - -When referenced from panel device tree bindings the properties defined in this -document are defined as follows. The panel device tree bindings are -responsible for defining whether each property is required or optional. - - -Descriptive Properties ----------------------- - -- width-mm, -- height-mm: The width-mm and height-mm specify the width and height of the - physical area where images are displayed. These properties are expressed in - millimeters and rounded to the closest unit. - -- label: The label property specifies a symbolic name for the panel as a - string suitable for use by humans. It typically contains a name inscribed on - the system (e.g. as an affixed label) or specified in the system's - documentation (e.g. in the user's manual). - - If no such name exists, and unless the property is mandatory according to - device tree bindings, it shall rather be omitted than constructed of - non-descriptive information. For instance an LCD panel in a system that - contains a single panel shall not be labelled "LCD" if that name is not - inscribed on the system or used in a descriptive fashion in system - documentation. - - -Display Timings ---------------- - -- panel-timing: Most display panels are restricted to a single resolution and - require specific display timings. The panel-timing subnode expresses those - timings as specified in the timing subnode section of the display timing - bindings defined in - Documentation/devicetree/bindings/display/panel/display-timing.txt. - - -Connectivity ------------- - -- ports: Panels receive video data through one or multiple connections. While - the nature of those connections is specific to the panel type, the - connectivity is expressed in a standard fashion using ports as specified in - the device graph bindings defined in - Documentation/devicetree/bindings/graph.txt. - -- ddc-i2c-bus: Some panels expose EDID information through an I2C-compatible - bus such as DDC2 or E-DDC. For such panels the ddc-i2c-bus contains a - phandle to the system I2C controller connected to that bus. - - -Control I/Os ------------- - -Many display panels can be controlled through pins driven by GPIOs. The nature -and timing of those control signals are device-specific and left for panel -device tree bindings to specify. The following GPIO specifiers can however be -used for panels that implement compatible control signals. - -- enable-gpios: Specifier for a GPIO connected to the panel enable control - signal. The enable signal is active high and enables operation of the panel. - This property can also be used for panels implementing an active low power - down signal, which is a negated version of the enable signal. Active low - enable signals (or active high power down signals) can be supported by - inverting the GPIO specifier polarity flag. - - Note that the enable signal control panel operation only and must not be - confused with a backlight enable signal. - -- reset-gpios: Specifier for a GPIO coonnected to the panel reset control - signal. The reset signal is active low and resets the panel internal logic - while active. Active high reset signals can be supported by inverting the - GPIO specifier polarity flag. - -Power ------ - -- power-supply: display panels require power to be supplied. While several - panels need more than one power supply with panel-specific constraints - governing the order and timings of the power supplies, in many cases a single - power supply is sufficient, either because the panel has a single power rail, - or because all its power rails can be driven by the same supply. In that case - the power-supply property specifies the supply powering the panel as a phandle - to a regulator. - -Backlight ---------- - -Most display panels include a backlight. Some of them also include a backlight -controller exposed through a control bus such as I2C or DSI. Others expose -backlight control through GPIO, PWM or other signals connected to an external -backlight controller. - -- backlight: For panels whose backlight is controlled by an external backlight - controller, this property contains a phandle that references the controller. diff --git a/Documentation/devicetree/bindings/display/panel/panel-common.yaml b/Documentation/devicetree/bindings/display/panel/panel-common.yaml new file mode 100644 index 000000000000..ef8d8cdfcede --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/panel-common.yaml @@ -0,0 +1,149 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/panel-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Common Properties for Display Panels + +maintainers: + - Thierry Reding + - Laurent Pinchart + +description: | + This document defines device tree properties common to several classes of + display panels. It doesn't constitue a device tree binding specification by + itself but is meant to be referenced by device tree bindings. + + When referenced from panel device tree bindings the properties defined in this + document are defined as follows. The panel device tree bindings are + responsible for defining whether each property is required or optional. + +properties: + # Descriptive Properties + width-mm: + description: + Specifies the width of the physical area where images are displayed. This + property is expressed in millimeters and rounded to the closest unit. + + height-mm: + description: + Specifies the height of the physical area where images are displayed. This + property is expressed in millimeters and rounded to the closest unit. + + label: + description: | + The label property specifies a symbolic name for the panel as a + string suitable for use by humans. It typically contains a name inscribed + on the system (e.g. as an affixed label) or specified in the system's + documentation (e.g. in the user's manual). + + If no such name exists, and unless the property is mandatory according to + device tree bindings, it shall rather be omitted than constructed of + non-descriptive information. For instance an LCD panel in a system that + contains a single panel shall not be labelled "LCD" if that name is not + inscribed on the system or used in a descriptive fashion in system + documentation. + + rotation: + description: + Display rotation in degrees counter clockwise (0,90,180,270) + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [ 0, 90, 180, 270 ] + + # Display Timings + panel-timing: + type: object + description: + Most display panels are restricted to a single resolution and + require specific display timings. The panel-timing subnode expresses those + timings as specified in the timing subnode section of the display timing + bindings defined in + Documentation/devicetree/bindings/display/panel/display-timing.txt. + + # Connectivity + port: + type: object + + ports: + type: object + description: + Panels receive video data through one or multiple connections. While + the nature of those connections is specific to the panel type, the + connectivity is expressed in a standard fashion using ports as specified + in the device graph bindings defined in + Documentation/devicetree/bindings/graph.txt. + + ddc-i2c-bus: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Some panels expose EDID information through an I2C-compatible + bus such as DDC2 or E-DDC. For such panels the ddc-i2c-bus contains a + phandle to the system I2C controller connected to that bus. + + no-hpd: + type: boolean + description: + This panel is supposed to communicate that it's ready via HPD + (hot plug detect) signal, but the signal isn't hooked up so we should + hardcode the max delay from the panel spec when powering up the panel. + + # Control I/Os + + # Many display panels can be controlled through pins driven by GPIOs. The nature + # and timing of those control signals are device-specific and left for panel + # device tree bindings to specify. The following GPIO specifiers can however be + # used for panels that implement compatible control signals. + + enable-gpios: + maxItems: 1 + description: | + Specifier for a GPIO connected to the panel enable control signal. The + enable signal is active high and enables operation of the panel. This + property can also be used for panels implementing an active low power down + signal, which is a negated version of the enable signal. Active low enable + signals (or active high power down signals) can be supported by inverting + the GPIO specifier polarity flag. + + Note that the enable signal control panel operation only and must not be + confused with a backlight enable signal. + + reset-gpios: + maxItems: 1 + description: + Specifier for a GPIO connected to the panel reset control signal. + The reset signal is active low and resets the panel internal logic + while active. Active high reset signals can be supported by inverting the + GPIO specifier polarity flag. + + # Power + power-supply: + description: + Display panels require power to be supplied. While several panels need + more than one power supply with panel-specific constraints governing the + order and timings of the power supplies, in many cases a single power + supply is sufficient, either because the panel has a single power rail, or + because all its power rails can be driven by the same supply. In that case + the power-supply property specifies the supply powering the panel as a + phandle to a regulator. + + # Backlight + + # Most display panels include a backlight. Some of them also include a backlight + # controller exposed through a control bus such as I2C or DSI. Others expose + # backlight control through GPIO, PWM or other signals connected to an external + # backlight controller. + + backlight: + $ref: /schemas/types.yaml#/definitions/phandle + description: + For panels whose backlight is controlled by an external backlight + controller, this property contains a phandle that references the + controller. + +dependencies: + width-mm: [ height-mm ] + height-mm: [ width-mm ] + +... diff --git a/Documentation/devicetree/bindings/display/panel/panel.txt b/Documentation/devicetree/bindings/display/panel/panel.txt deleted file mode 100644 index e2e6867852b8..000000000000 --- a/Documentation/devicetree/bindings/display/panel/panel.txt +++ /dev/null @@ -1,4 +0,0 @@ -Common display properties -------------------------- - -- rotation: Display rotation in degrees counter clockwise (0,90,180,270) diff --git a/Documentation/devicetree/bindings/display/panel/simple-panel.txt b/Documentation/devicetree/bindings/display/panel/simple-panel.txt index b2b872c710f2..e11208fb7da8 100644 --- a/Documentation/devicetree/bindings/display/panel/simple-panel.txt +++ b/Documentation/devicetree/bindings/display/panel/simple-panel.txt @@ -1,28 +1 @@ -Simple display panel -==================== - -panel node ----------- - -Required properties: -- power-supply: See panel-common.txt - -Optional properties: -- ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing -- enable-gpios: GPIO pin to enable or disable the panel -- backlight: phandle of the backlight device attached to the panel -- no-hpd: This panel is supposed to communicate that it's ready via HPD - (hot plug detect) signal, but the signal isn't hooked up so we should - hardcode the max delay from the panel spec when powering up the panel. - -Example: - - panel: panel { - compatible = "cptt,claa101wb01"; - ddc-i2c-bus = <&panelddc>; - - power-supply = <&vdd_pnl_reg>; - enable-gpios = <&gpio 90 0>; - - backlight = <&backlight>; - }; +See panel-common.yaml in this directory.