| Message ID | 20190811091001.49555-4-jitao.shi@mediatek.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add drivers for auo, kd101n80-45na and boe, tv101wum-nl6 panels | expand |
On Sun, 11 Aug 2019 17:10:00 +0800, Jitao Shi wrote: > Add documentation for auo kd101n80-45na panel. > > Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> > Reviewed-by: Sam Ravnborg <sam@ravnborg.org> > --- > .../display/panel/auo,kd101n80-45na.txt | 34 +++++++++++++++++++ > 1 file changed, 34 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/panel/auo,kd101n80-45na.txt > Please add Acked-by/Reviewed-by tags when posting new versions. However, there's no need to repost patches *only* to add the tags. The upstream maintainer will do that for acks received on the version they apply. If a tag was not added on purpose, please state why and what changed.
diff --git a/Documentation/devicetree/bindings/display/panel/auo,kd101n80-45na.txt b/Documentation/devicetree/bindings/display/panel/auo,kd101n80-45na.txt new file mode 100644 index 000000000000..994c2a13f942 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/auo,kd101n80-45na.txt @@ -0,0 +1,34 @@ +AUO Corporation 10.1" WUXGA TFT LCD panel + +Required properties: +- compatible: should be "auo,kd101n80-45na" +- reg: the virtual channel number of a DSI peripheral +- enable-gpios: a GPIO spec for the enable pin +- pp1800-supply: core voltage supply +- avdd-supply: phandle of the regulator that provides positive voltage +- avee-supply: phandle of the regulator that provides negative voltage +- backlight: phandle of the backlight device attached to the panel + +The device node can contain one 'port' child node with one child +'endpoint' node, according to the bindings defined in +media/video-interfaces.txt. This node should describe panel's video bus. + +Example: +&dsi { + ... + panel@0 { + compatible = "auo,kd101n80-45na"; + reg = <0>; + enable-gpios = <&pio 45 0>; + avdd-supply = <&ppvarn_lcd>; + avee-supply = <&ppvarp_lcd>; + pp1800-supply = <&pp1800_lcd>; + backlight = <&backlight_lcd0>; + status = "okay"; + port { + panel_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + }; +};