@@ -246,9 +246,9 @@ void __init config_atari(void)
} else if (hwreg_present(tt_palette)) {
ATARIHW_SET(TT_SHIFTER);
pr_cont(" TT_SHIFTER");
- } else if (hwreg_present(&shifter.bas_hi)) {
- if (hwreg_present(&shifter.bas_lo) &&
- (shifter.bas_lo = 0x0aau, shifter.bas_lo == 0x0aau)) {
+ } else if (hwreg_present(&shifter_st.bas_hi)) {
+ if (hwreg_present(&shifter_st.bas_lo) &&
+ (shifter_st.bas_lo = 0x0aau, shifter_st.bas_lo == 0x0aau)) {
ATARIHW_SET(EXTD_SHIFTER);
pr_cont(" EXTD_SHIFTER");
} else {
@@ -170,7 +170,7 @@ static inline void dma_cache_maintenance( unsigned long paddr,
#define TT_HIGH 6
#define SHF_BAS (0xffff8200)
-struct SHIFTER
+struct SHIFTER_ST
{
u_char pad1;
u_char bas_hi;
@@ -187,7 +187,7 @@ struct SHIFTER
u_char pad7;
u_char bas_lo;
};
-# define shifter ((*(volatile struct SHIFTER *)SHF_BAS))
+# define shifter_st ((*(volatile struct SHIFTER_ST *)SHF_BAS))
#define SHF_FBAS (0xffff820e)
struct SHIFTER_F030
@@ -763,17 +763,17 @@ static void tt_get_par(struct atafb_par *par)
{
unsigned long addr;
par->hw.tt.mode = shifter_tt.tt_shiftmode;
- par->hw.tt.sync = shifter.syncmode;
- addr = ((shifter.bas_hi & 0xff) << 16) |
- ((shifter.bas_md & 0xff) << 8) |
- ((shifter.bas_lo & 0xff));
+ par->hw.tt.sync = shifter_st.syncmode;
+ addr = ((shifter_st.bas_hi & 0xff) << 16) |
+ ((shifter_st.bas_md & 0xff) << 8) |
+ ((shifter_st.bas_lo & 0xff));
par->screen_base = atari_stram_to_virt(addr);
}
static void tt_set_par(struct atafb_par *par)
{
shifter_tt.tt_shiftmode = par->hw.tt.mode;
- shifter.syncmode = par->hw.tt.sync;
+ shifter_st.syncmode = par->hw.tt.sync;
/* only set screen_base if really necessary */
if (current_par.screen_base != par->screen_base)
fbhw->set_screen_base(par->screen_base);
@@ -1543,7 +1543,7 @@ static void falcon_get_par(struct atafb_par *par)
hw->f_shift = videl.f_shift;
hw->vid_control = videl.control;
hw->vid_mode = videl.mode;
- hw->sync = shifter.syncmode & 0x1;
+ hw->sync = shifter_st.syncmode & 0x1;
hw->xoffset = videl.xoffset & 0xf;
hw->hht = videl.hht;
hw->hbb = videl.hbb;
@@ -1558,9 +1558,9 @@ static void falcon_get_par(struct atafb_par *par)
hw->vde = videl.vde;
hw->vss = videl.vss;
- addr = (shifter.bas_hi & 0xff) << 16 |
- (shifter.bas_md & 0xff) << 8 |
- (shifter.bas_lo & 0xff);
+ addr = (shifter_st.bas_hi & 0xff) << 16 |
+ (shifter_st.bas_md & 0xff) << 8 |
+ (shifter_st.bas_lo & 0xff);
par->screen_base = atari_stram_to_virt(addr);
/* derived parameters */
@@ -1605,7 +1605,7 @@ static irqreturn_t falcon_vbl_switcher(int irq, void *dummy)
/* Turn off external clocks. Read sets all output bits to 1. */
*(volatile unsigned short *)0xffff9202;
}
- shifter.syncmode = hw->sync;
+ shifter_st.syncmode = hw->sync;
videl.hht = hw->hht;
videl.hbb = hw->hbb;
@@ -1952,18 +1952,18 @@ static void stste_get_par(struct atafb_par *par)
{
unsigned long addr;
par->hw.st.mode = shifter_tt.st_shiftmode;
- par->hw.st.sync = shifter.syncmode;
- addr = ((shifter.bas_hi & 0xff) << 16) |
- ((shifter.bas_md & 0xff) << 8);
+ par->hw.st.sync = shifter_st.syncmode;
+ addr = ((shifter_st.bas_hi & 0xff) << 16) |
+ ((shifter_st.bas_md & 0xff) << 8);
if (ATARIHW_PRESENT(EXTD_SHIFTER))
- addr |= (shifter.bas_lo & 0xff);
+ addr |= (shifter_st.bas_lo & 0xff);
par->screen_base = atari_stram_to_virt(addr);
}
static void stste_set_par(struct atafb_par *par)
{
shifter_tt.st_shiftmode = par->hw.st.mode;
- shifter.syncmode = par->hw.st.sync;
+ shifter_st.syncmode = par->hw.st.sync;
/* only set screen_base if really necessary */
if (current_par.screen_base != par->screen_base)
fbhw->set_screen_base(par->screen_base);
@@ -2018,10 +2018,10 @@ static void stste_set_screen_base(void *s_base)
unsigned long addr;
addr = atari_stram_to_phys(s_base);
/* Setup Screen Memory */
- shifter.bas_hi = (unsigned char)((addr & 0xff0000) >> 16);
- shifter.bas_md = (unsigned char)((addr & 0x00ff00) >> 8);
+ shifter_st.bas_hi = (unsigned char)((addr & 0xff0000) >> 16);
+ shifter_st.bas_md = (unsigned char)((addr & 0x00ff00) >> 8);
if (ATARIHW_PRESENT(EXTD_SHIFTER))
- shifter.bas_lo = (unsigned char)(addr & 0x0000ff);
+ shifter_st.bas_lo = (unsigned char)(addr & 0x0000ff);
}
#endif /* ATAFB_STE */
@@ -2265,9 +2265,9 @@ static void set_screen_base(void *s_base)
addr = atari_stram_to_phys(s_base);
/* Setup Screen Memory */
- shifter.bas_hi = (unsigned char)((addr & 0xff0000) >> 16);
- shifter.bas_md = (unsigned char)((addr & 0x00ff00) >> 8);
- shifter.bas_lo = (unsigned char)(addr & 0x0000ff);
+ shifter_st.bas_hi = (unsigned char)((addr & 0xff0000) >> 16);
+ shifter_st.bas_md = (unsigned char)((addr & 0x00ff00) >> 8);
+ shifter_st.bas_lo = (unsigned char)(addr & 0x0000ff);
}
static int pan_display(struct fb_var_screeninfo *var, struct fb_info *info)
When test-compiling the BCM2835 pin control driver on m68k: In file included from arch/m68k/include/asm/io_mm.h:32:0, from arch/m68k/include/asm/io.h:8, from include/linux/io.h:13, from include/linux/irq.h:20, from include/linux/gpio/driver.h:7, from drivers/pinctrl/bcm/pinctrl-bcm2835.c:17: drivers/pinctrl/bcm/pinctrl-bcm2835.c: In function 'bcm2711_pull_config_set': arch/m68k/include/asm/atarihw.h:190:22: error: expected identifier or '(' before 'volatile' # define shifter ((*(volatile struct SHIFTER *)SHF_BAS)) "shifter" is a too generic name for a global definition. As the corresponding definition for Atari TT is already called "shifter_tt", fix this by renaming the definition for Atari ST to "shifter_st". Reported-by: kbuild test robot <lkp@intel.com> Suggested-by: Michael Schmitz <schmitzmic@gmail.com> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> --- To be queued in the m68k tree for v5.4. arch/m68k/atari/config.c | 6 ++--- arch/m68k/include/asm/atarihw.h | 4 ++-- drivers/video/fbdev/atafb.c | 42 ++++++++++++++++----------------- 3 files changed, 26 insertions(+), 26 deletions(-)