[v5,7/8] dt-bindings: display: panel: add AUO auo, b101uan08.3 panel documentation

Commit Message

Jitao Shi Sept. 16, 2019, 2:29 a.m. UTC

Add dcumentation for auo,b101uan08.3, which is mipi dsi video panel
and resolution is 1200x1920.

Signed-off-by: Jitao Shi <[e-mail]>
---
 .../display/panel/auo,b101uan08.3.txt         | 34 +++++++++++++++++++
 1 file changed, 34 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/auo,b101uan08.3.txt

Patch

diff --git a/Documentation/devicetree/bindings/display/panel/auo,b101uan08.3.txt b/Documentation/devicetree/bindings/display/panel/auo,b101uan08.3.txt
new file mode 100644
index 000000000000..7a31cfe534ac
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/auo,b101uan08.3.txt
@@ -0,0 +1,34 @@ 
+AUO Corporation 10.1" WUXGA TFT LCD panel
+
+Required properties:
+- compatible: should be "auo,b101uan08.3"
+- reg: the virtual channel number of a DSI peripheral
+- enable-gpios: a GPIO spec for the enable pin
+- pp1800-supply: core voltage supply
+- avdd-supply: phandle of the regulator that provides positive voltage
+- avee-supply: phandle of the regulator that provides negative voltage
+- backlight: phandle of the backlight device attached to the panel
+
+The device node can contain one 'port' child node with one child
+'endpoint' node, according to the bindings defined in
+media/video-interfaces.txt. This node should describe panel's video bus.
+
+Example:
+&dsi {
+	...
+	panel@0 {
+		compatible = "auo,b101uan08.3";
+		reg = <0>;
+		enable-gpios = <&pio 45 0>;
+		avdd-supply = <&ppvarn_lcd>;
+		avee-supply = <&ppvarp_lcd>;
+		pp1800-supply = <&pp1800_lcd>;
+		backlight = <&backlight_lcd0>;
+		status = "okay";
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&dsi_out>;
+			};
+		};
+	};
+};