@@ -4597,7 +4597,7 @@ static int dm_encoder_helper_atomic_check(struct drm_encoder *encoder,
if(!state->duplicated) {
bpp = (uint8_t)connector->display_info.bpc * 3;
clock = adjusted_mode->clock;
- aconnector->pbn = drm_dp_calc_pbn_mode(clock, bpp);
+ aconnector->pbn = drm_dp_calc_pbn_mode(clock, bpp, false);
}
aconnector->vcpi_slots = drm_dp_atomic_find_vcpi_slots(state,
mst_mgr,
@@ -3534,10 +3534,11 @@ EXPORT_SYMBOL(drm_dp_check_act_status);
* drm_dp_calc_pbn_mode() - Calculate the PBN for a mode.
* @clock: dot clock for the mode
* @bpp: bpp for the mode.
+ * @dsc: DSC mode. If true, bpp has units of 1/16 of a bit per pixel
*
* This uses the formula in the spec to calculate the PBN value for a mode.
*/
-int drm_dp_calc_pbn_mode(int clock, int bpp)
+int drm_dp_calc_pbn_mode(int clock, int bpp, bool dsc)
{
u64 kbps;
s64 peak_kbps;
@@ -3555,11 +3556,18 @@ int drm_dp_calc_pbn_mode(int clock, int bpp)
* peak_kbps *= (1006/1000)
* peak_kbps *= (64/54)
* peak_kbps *= 8 convert to bytes
+ *
+ * If the bpp is in units of 1/16, further divide by 16. Put this
+ * factor in the numerator rather than the denominator to avoid
+ * integer overflow
*/
numerator = 64 * 1006;
denominator = 54 * 8 * 1000 * 1000;
+ if (dsc)
+ numerator /= 16;
+
kbps *= numerator;
peak_kbps = drm_fixp_from_fraction(kbps, denominator);
@@ -3570,19 +3578,19 @@ EXPORT_SYMBOL(drm_dp_calc_pbn_mode);
static int test_calc_pbn_mode(void)
{
int ret;
- ret = drm_dp_calc_pbn_mode(154000, 30);
+ ret = drm_dp_calc_pbn_mode(154000, 30, false);
if (ret != 689) {
DRM_ERROR("PBN calculation test failed - clock %d, bpp %d, expected PBN %d, actual PBN %d.\n",
154000, 30, 689, ret);
return -EINVAL;
}
- ret = drm_dp_calc_pbn_mode(234000, 30);
+ ret = drm_dp_calc_pbn_mode(234000, 30, false);
if (ret != 1047) {
DRM_ERROR("PBN calculation test failed - clock %d, bpp %d, expected PBN %d, actual PBN %d.\n",
234000, 30, 1047, ret);
return -EINVAL;
}
- ret = drm_dp_calc_pbn_mode(297000, 24);
+ ret = drm_dp_calc_pbn_mode(297000, 24, false);
if (ret != 1063) {
DRM_ERROR("PBN calculation test failed - clock %d, bpp %d, expected PBN %d, actual PBN %d.\n",
297000, 24, 1063, ret);
@@ -61,7 +61,8 @@ static int intel_dp_mst_compute_link_config(struct intel_encoder *encoder,
crtc_state->pipe_bpp = bpp;
crtc_state->pbn = drm_dp_calc_pbn_mode(adjusted_mode->crtc_clock,
- crtc_state->pipe_bpp);
+ crtc_state->pipe_bpp,
+ false);
slots = drm_dp_atomic_find_vcpi_slots(state, &intel_dp->mst_mgr,
port, crtc_state->pbn);
@@ -778,7 +778,8 @@ nv50_msto_atomic_check(struct drm_encoder *encoder,
if (!state->duplicated)
asyh->dp.pbn =
drm_dp_calc_pbn_mode(crtc_state->adjusted_mode.clock,
- connector->display_info.bpc * 3);
+ connector->display_info.bpc * 3,
+ false);
if (crtc_state->mode_changed) {
slots = drm_dp_atomic_find_vcpi_slots(state, &mstm->mgr,
@@ -514,7 +514,7 @@ static bool radeon_mst_mode_fixup(struct drm_encoder *encoder,
mst_enc = radeon_encoder->enc_priv;
- mst_enc->pbn = drm_dp_calc_pbn_mode(adjusted_mode->clock, bpp);
+ mst_enc->pbn = drm_dp_calc_pbn_mode(adjusted_mode->clock, bpp, false);
mst_enc->primary->active_device = mst_enc->primary->devices & mst_enc->connector->devices;
DRM_DEBUG_KMS("setting active device to %08x from %08x %08x for encoder %d\n",
@@ -610,8 +610,7 @@ bool drm_dp_mst_port_has_audio(struct drm_dp_mst_topology_mgr *mgr,
struct edid *drm_dp_mst_get_edid(struct drm_connector *connector, struct drm_dp_mst_topology_mgr *mgr, struct drm_dp_mst_port *port);
-int drm_dp_calc_pbn_mode(int clock, int bpp);
-
+int drm_dp_calc_pbn_mode(int clock, int bpp, bool dsc);
bool drm_dp_mst_allocate_vcpi(struct drm_dp_mst_topology_mgr *mgr,
struct drm_dp_mst_port *port, int pbn, int slots);