| Message ID | 20200212094628.GB1143@ninjato (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | i2c: jz4780: silence log flood on txabrt | expand |
Hi, > Am 12.02.2020 um 10:46 schrieb Wolfram Sang <wsa@the-dreams.de>: > > > The printout for txabrt is way too talkative. Reduce it to the minimum, > the rest can be gained by I2C core debugging and datasheet information. > Also, make it a debug printout, it won't help the regular user. > > Reported-by: H. Nikolaus Schaller <hns@goldelico.com> > Signed-off-by: Wolfram Sang <wsa@the-dreams.de> > --- > > Sorry, normally I don't do counter patches. Yet, this time I realized > that it would be faster to actually do what I envisioned than to > describe it in words. I hope you don't feel offended. No problem. I had thought a little about that myself, but did not dare to solve more than my problem... > This driver has > way too many dev_err anyhow, so this may be a start. > > Obviously, I can't test, does it work for you? Yes,it works. Do you want to push your patch yourself, or should I add it to my patch series and resubmit in a v2? BR and thanks, Nikolaus > > drivers/i2c/busses/i2c-jz4780.c | 36 ++------------------------------- > 1 file changed, 2 insertions(+), 34 deletions(-) > > diff --git a/drivers/i2c/busses/i2c-jz4780.c b/drivers/i2c/busses/i2c-jz4780.c > index 16a67a64284a..b426fc956938 100644 > --- a/drivers/i2c/busses/i2c-jz4780.c > +++ b/drivers/i2c/busses/i2c-jz4780.c > @@ -78,25 +78,6 @@ > > #define X1000_I2C_DC_STOP BIT(9) > > -static const char * const jz4780_i2c_abrt_src[] = { > - "ABRT_7B_ADDR_NOACK", > - "ABRT_10ADDR1_NOACK", > - "ABRT_10ADDR2_NOACK", > - "ABRT_XDATA_NOACK", > - "ABRT_GCALL_NOACK", > - "ABRT_GCALL_READ", > - "ABRT_HS_ACKD", > - "SBYTE_ACKDET", > - "ABRT_HS_NORSTRT", > - "SBYTE_NORSTRT", > - "ABRT_10B_RD_NORSTRT", > - "ABRT_MASTER_DIS", > - "ARB_LOST", > - "SLVFLUSH_TXFIFO", > - "SLV_ARBLOST", > - "SLVRD_INTX", > -}; > - > #define JZ4780_I2C_INTST_IGC BIT(11) > #define JZ4780_I2C_INTST_ISTT BIT(10) > #define JZ4780_I2C_INTST_ISTP BIT(9) > @@ -576,21 +557,8 @@ static irqreturn_t jz4780_i2c_irq(int irqno, void *dev_id) > > static void jz4780_i2c_txabrt(struct jz4780_i2c *i2c, int src) > { > - int i; > - > - dev_err(&i2c->adap.dev, "txabrt: 0x%08x\n", src); > - dev_err(&i2c->adap.dev, "device addr=%x\n", > - jz4780_i2c_readw(i2c, JZ4780_I2C_TAR)); > - dev_err(&i2c->adap.dev, "send cmd count:%d %d\n", > - i2c->cmd, i2c->cmd_buf[i2c->cmd]); > - dev_err(&i2c->adap.dev, "receive data count:%d %d\n", > - i2c->cmd, i2c->data_buf[i2c->cmd]); > - > - for (i = 0; i < 16; i++) { > - if (src & BIT(i)) > - dev_dbg(&i2c->adap.dev, "I2C TXABRT[%d]=%s\n", > - i, jz4780_i2c_abrt_src[i]); > - } > + dev_dbg(&i2c->adap.dev, "txabrt: 0x%08x, cmd: %d, send: %d, recv: %d\n", > + src, i2c->cmd, i2c->cmd_buf[i2c->cmd], i2c->data_buf[i2c->cmd]); > } > > static inline int jz4780_i2c_xfer_read(struct jz4780_i2c *i2c, > -- > 2.20.1 >
Hi, > > Sorry, normally I don't do counter patches. Yet, this time I realized > > that it would be faster to actually do what I envisioned than to > > describe it in words. I hope you don't feel offended. > > No problem. I had thought a little about that myself, but did not > dare to solve more than my problem... Glad you like it. Well, it still kinda solves your problem only, because there are still too many dev_err in there, but I think this is good enough for now. > > Obviously, I can't test, does it work for you? > > Yes,it works. Good! > Do you want to push your patch yourself, or should I add it to my > patch series and resubmit in a v2? I'll apply the patch to my tree directly as a bugfix for 5.6. You can drop the I2C list from V2 then. Thanks and kind regards, Wolfram
> Am 12.02.2020 um 15:53 schrieb Wolfram Sang <wsa@the-dreams.de>: > > Hi, > >>> Sorry, normally I don't do counter patches. Yet, this time I realized >>> that it would be faster to actually do what I envisioned than to >>> describe it in words. I hope you don't feel offended. >> >> No problem. I had thought a little about that myself, but did not >> dare to solve more than my problem... > > Glad you like it. Well, it still kinda solves your problem only, because > there are still too many dev_err in there, but I think this is good > enough for now. > >>> Obviously, I can't test, does it work for you? >> >> Yes,it works. > > Good! > >> Do you want to push your patch yourself, or should I add it to my >> patch series and resubmit in a v2? > > I'll apply the patch to my tree directly as a bugfix for 5.6. You can > drop the I2C list from V2 then. Ok, fine. BR and thanks, Nikolaus
On Wed, Feb 12, 2020 at 10:46:28AM +0100, Wolfram Sang wrote: > > The printout for txabrt is way too talkative. Reduce it to the minimum, > the rest can be gained by I2C core debugging and datasheet information. > Also, make it a debug printout, it won't help the regular user. > > Reported-by: H. Nikolaus Schaller <hns@goldelico.com> > Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Applied to for-current, thanks!
diff --git a/drivers/i2c/busses/i2c-jz4780.c b/drivers/i2c/busses/i2c-jz4780.c index 16a67a64284a..b426fc956938 100644 --- a/drivers/i2c/busses/i2c-jz4780.c +++ b/drivers/i2c/busses/i2c-jz4780.c @@ -78,25 +78,6 @@ #define X1000_I2C_DC_STOP BIT(9) -static const char * const jz4780_i2c_abrt_src[] = { - "ABRT_7B_ADDR_NOACK", - "ABRT_10ADDR1_NOACK", - "ABRT_10ADDR2_NOACK", - "ABRT_XDATA_NOACK", - "ABRT_GCALL_NOACK", - "ABRT_GCALL_READ", - "ABRT_HS_ACKD", - "SBYTE_ACKDET", - "ABRT_HS_NORSTRT", - "SBYTE_NORSTRT", - "ABRT_10B_RD_NORSTRT", - "ABRT_MASTER_DIS", - "ARB_LOST", - "SLVFLUSH_TXFIFO", - "SLV_ARBLOST", - "SLVRD_INTX", -}; - #define JZ4780_I2C_INTST_IGC BIT(11) #define JZ4780_I2C_INTST_ISTT BIT(10) #define JZ4780_I2C_INTST_ISTP BIT(9) @@ -576,21 +557,8 @@ static irqreturn_t jz4780_i2c_irq(int irqno, void *dev_id) static void jz4780_i2c_txabrt(struct jz4780_i2c *i2c, int src) { - int i; - - dev_err(&i2c->adap.dev, "txabrt: 0x%08x\n", src); - dev_err(&i2c->adap.dev, "device addr=%x\n", - jz4780_i2c_readw(i2c, JZ4780_I2C_TAR)); - dev_err(&i2c->adap.dev, "send cmd count:%d %d\n", - i2c->cmd, i2c->cmd_buf[i2c->cmd]); - dev_err(&i2c->adap.dev, "receive data count:%d %d\n", - i2c->cmd, i2c->data_buf[i2c->cmd]); - - for (i = 0; i < 16; i++) { - if (src & BIT(i)) - dev_dbg(&i2c->adap.dev, "I2C TXABRT[%d]=%s\n", - i, jz4780_i2c_abrt_src[i]); - } + dev_dbg(&i2c->adap.dev, "txabrt: 0x%08x, cmd: %d, send: %d, recv: %d\n", + src, i2c->cmd, i2c->cmd_buf[i2c->cmd], i2c->data_buf[i2c->cmd]); } static inline int jz4780_i2c_xfer_read(struct jz4780_i2c *i2c,
The printout for txabrt is way too talkative. Reduce it to the minimum, the rest can be gained by I2C core debugging and datasheet information. Also, make it a debug printout, it won't help the regular user. Reported-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> --- Sorry, normally I don't do counter patches. Yet, this time I realized that it would be faster to actually do what I envisioned than to describe it in words. I hope you don't feel offended. This driver has way too many dev_err anyhow, so this may be a start. Obviously, I can't test, does it work for you? drivers/i2c/busses/i2c-jz4780.c | 36 ++------------------------------- 1 file changed, 2 insertions(+), 34 deletions(-)