@@ -27,6 +27,16 @@ config DRM_CDNS_DSI
Support Cadence DPI to DSI bridge. This is an internal
bridge and is meant to be directly embedded in a SoC.
+config DRM_CHRONTEL_CH7033
+ tristate "Chrontel CH7033 Video Encoder"
+ depends on OF
+ select DRM_KMS_HELPER
+ help
+ Enable support for the Chrontel CH7033 VGA/DVI/HDMI Encoder, as
+ found in the Dell Wyse 3020 thin client.
+
+ If in doubt, say "N".
+
config DRM_DISPLAY_CONNECTOR
tristate "Display connector support"
depends on OF
@@ -1,5 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
obj-$(CONFIG_DRM_CDNS_DSI) += cdns-dsi.o
+obj-$(CONFIG_DRM_CHRONTEL_CH7033) += chrontel-ch7033.o
obj-$(CONFIG_DRM_DISPLAY_CONNECTOR) += display-connector.o
obj-$(CONFIG_DRM_LVDS_CODEC) += lvds-codec.o
obj-$(CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW) += megachips-stdpxxxx-ge-b850v3-fw.o
new file mode 100644
@@ -0,0 +1,675 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Chrontel CH7033 Video Encoder Driver
+ *
+ * Copyright (C) 2019,2020 Lubomir Rintel
+ */
+
+#include <linux/component.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_bridge.h>
+#include <drm/drm_edid.h>
+#include <drm/drm_of.h>
+#include <drm/drm_print.h>
+#include <drm/drm_probe_helper.h>
+
+/* Page 0, Register 0x07 */
+enum {
+ DRI_PD = BIT(3),
+ IO_PD = BIT(5),
+};
+
+/* Page 0, Register 0x08 */
+enum {
+ DRI_PDDRI = GENMASK(7, 4),
+ PDDAC = GENMASK(3, 1),
+ PANEN = BIT(0),
+};
+
+/* Page 0, Register 0x09 */
+enum {
+ DPD = BIT(7),
+ GCKOFF = BIT(6),
+ TV_BP = BIT(5),
+ SCLPD = BIT(4),
+ SDPD = BIT(3),
+ VGA_PD = BIT(2),
+ HDBKPD = BIT(1),
+ HDMI_PD = BIT(0),
+};
+
+/* Page 0, Register 0x0a */
+enum {
+ MEMINIT = BIT(7),
+ MEMIDLE = BIT(6),
+ MEMPD = BIT(5),
+ STOP = BIT(4),
+ LVDS_PD = BIT(3),
+ HD_DVIB = BIT(2),
+ HDCP_PD = BIT(1),
+ MCU_PD = BIT(0),
+};
+
+/* Page 0, Register 0x18 */
+enum {
+ IDF = GENMASK(7, 4),
+ INTEN = BIT(3),
+ SWAP = GENMASK(2, 0),
+};
+
+enum {
+ BYTE_SWAP_RGB = 0,
+ BYTE_SWAP_RBG = 1,
+ BYTE_SWAP_GRB = 2,
+ BYTE_SWAP_GBR = 3,
+ BYTE_SWAP_BRG = 4,
+ BYTE_SWAP_BGR = 5,
+};
+
+/* Page 0, Register 0x19 */
+enum {
+ HPO_I = BIT(5),
+ VPO_I = BIT(4),
+ DEPO_I = BIT(3),
+ CRYS_EN = BIT(2),
+ GCLKFREQ = GENMASK(2, 0),
+};
+
+/* Page 0, Register 0x2e */
+enum {
+ HFLIP = BIT(7),
+ VFLIP = BIT(6),
+ DEPO_O = BIT(5),
+ HPO_O = BIT(4),
+ VPO_O = BIT(3),
+ TE = GENMASK(2, 0),
+};
+
+/* Page 0, Register 0x2b */
+enum {
+ SWAPS = GENMASK(7, 4),
+ VFMT = GENMASK(3, 0),
+};
+
+/* Page 0, Register 0x54 */
+enum {
+ COMP_BP = BIT(7),
+ DAC_EN_T = BIT(6),
+ HWO_HDMI_HI = GENMASK(5, 3),
+ HOO_HDMI_HI = GENMASK(2, 0),
+};
+
+/* Page 0, Register 0x57 */
+enum {
+ FLDSEN = BIT(7),
+ VWO_HDMI_HI = GENMASK(5, 3),
+ VOO_HDMI_HI = GENMASK(2, 0),
+};
+
+/* Page 0, Register 0x7e */
+enum {
+ HDMI_LVDS_SEL = BIT(7),
+ DE_GEN = BIT(6),
+ PWM_INDEX_HI = BIT(5),
+ USE_DE = BIT(4),
+ R_INT = GENMASK(3, 0),
+};
+
+/* Page 1, Register 0x07 */
+enum {
+ BPCKSEL = BIT(7),
+ DRI_CMFB_EN = BIT(6),
+ CEC_PUEN = BIT(5),
+ CEC_T = BIT(3),
+ CKINV = BIT(2),
+ CK_TVINV = BIT(1),
+ DRI_CKS2 = BIT(0),
+};
+
+/* Page 1, Register 0x08 */
+enum {
+ DACG = BIT(6),
+ DACKTST = BIT(5),
+ DEDGEB = BIT(4),
+ SYO = BIT(3),
+ DRI_IT_LVDS = GENMASK(2, 1),
+ DISPON = BIT(0),
+};
+
+/* Page 1, Register 0x0c */
+enum {
+ DRI_PLL_CP = GENMASK(7, 6),
+ DRI_PLL_DIVSEL = BIT(5),
+ DRI_PLL_N1_1 = BIT(4),
+ DRI_PLL_N1_0 = BIT(3),
+ DRI_PLL_N3_1 = BIT(2),
+ DRI_PLL_N3_0 = BIT(1),
+ DRI_PLL_CKTSTEN = BIT(0),
+};
+
+/* Page 1, Register 0x6b */
+enum {
+ VCO3CS = GENMASK(7, 6),
+ ICPGBK2_0 = GENMASK(5, 3),
+ DRI_VCO357SC = BIT(2),
+ PDPLL2 = BIT(1),
+ DRI_PD_SER = BIT(0),
+};
+
+/* Page 1, Register 0x6c */
+enum {
+ PLL2N11 = GENMASK(7, 4),
+ PLL2N5_4 = BIT(3),
+ PLL2N5_TOP = BIT(2),
+ DRI_PLL_PD = BIT(1),
+ PD_I2CM = BIT(0),
+};
+
+/* Page 3, Register 0x28 */
+enum {
+ DIFF_EN = GENMASK(7, 6),
+ CORREC_EN = GENMASK(5, 4),
+ VGACLK_BP = BIT(3),
+ HM_LV_SEL = BIT(2),
+ HD_VGA_SEL = BIT(1),
+};
+
+/* Page 3, Register 0x2a */
+enum {
+ LVDSCLK_BP = BIT(7),
+ HDTVCLK_BP = BIT(6),
+ HDMICLK_BP = BIT(5),
+ HDTV_BP = BIT(4),
+ HDMI_BP = BIT(3),
+ THRWL = GENMASK(2, 0),
+};
+
+/* Page 4, Register 0x52 */
+enum {
+ PGM_ARSTB = BIT(7),
+ MCU_ARSTB = BIT(6),
+ MCU_RETB = BIT(2),
+ RESETIB = BIT(1),
+ RESETDB = BIT(0),
+};
+
+struct ch7033_priv {
+ struct regmap *regmap;
+ struct drm_bridge *next_bridge;
+ struct drm_encoder encoder;
+ struct drm_bridge bridge;
+ struct drm_connector connector;
+};
+
+#define conn_to_ch7033_priv(x) \
+ container_of(x, struct ch7033_priv, connector)
+#define bridge_to_ch7033_priv(x) \
+ container_of(x, struct ch7033_priv, bridge)
+
+
+static enum drm_connector_status ch7033_connector_detect(
+ struct drm_connector *connector, bool force)
+{
+ struct ch7033_priv *priv = conn_to_ch7033_priv(connector);
+
+ return drm_bridge_detect(priv->next_bridge);
+}
+
+static const struct drm_connector_funcs ch7033_connector_funcs = {
+ .reset = drm_atomic_helper_connector_reset,
+ .fill_modes = drm_helper_probe_single_connector_modes,
+ .detect = ch7033_connector_detect,
+ .destroy = drm_connector_cleanup,
+ .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
+ .atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
+};
+
+static int ch7033_connector_get_modes(struct drm_connector *connector)
+{
+ struct ch7033_priv *priv = conn_to_ch7033_priv(connector);
+ struct edid *edid;
+ int ret;
+
+ edid = drm_bridge_get_edid(priv->next_bridge, connector);
+ drm_connector_update_edid_property(connector, edid);
+ if (edid) {
+ ret = drm_add_edid_modes(connector, edid);
+ kfree(edid);
+ } else {
+ ret = drm_add_modes_noedid(connector, 1920, 1080);
+ drm_set_preferred_mode(connector, 1024, 768);
+ }
+
+ return ret;
+}
+
+static struct drm_encoder *ch7033_connector_best_encoder(
+ struct drm_connector *connector)
+{
+ struct ch7033_priv *priv = conn_to_ch7033_priv(connector);
+
+ return priv->bridge.encoder;
+}
+
+static const struct drm_connector_helper_funcs ch7033_connector_helper_funcs = {
+ .get_modes = ch7033_connector_get_modes,
+ .best_encoder = ch7033_connector_best_encoder,
+};
+
+static void ch7033_hpd_event(void *arg, enum drm_connector_status status)
+{
+ struct ch7033_priv *priv = arg;
+
+ if (priv->bridge.dev)
+ drm_helper_hpd_irq_event(priv->connector.dev);
+}
+
+static int ch7033_bridge_attach(struct drm_bridge *bridge,
+ enum drm_bridge_attach_flags flags)
+{
+ struct ch7033_priv *priv = bridge_to_ch7033_priv(bridge);
+ struct drm_connector *connector = &priv->connector;
+ int ret;
+
+ ret = drm_bridge_attach(bridge->encoder, priv->next_bridge, bridge,
+ DRM_BRIDGE_ATTACH_NO_CONNECTOR);
+ if (ret < 0)
+ return ret;
+
+ if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR)
+ return 0;
+
+ if (priv->next_bridge->ops & DRM_BRIDGE_OP_DETECT) {
+ connector->polled = DRM_CONNECTOR_POLL_HPD;
+ } else {
+ connector->polled = DRM_CONNECTOR_POLL_CONNECT |
+ DRM_CONNECTOR_POLL_DISCONNECT;
+ }
+
+ if (priv->next_bridge->ops & DRM_BRIDGE_OP_HPD) {
+ drm_bridge_hpd_enable(priv->next_bridge, ch7033_hpd_event,
+ priv);
+ }
+
+ drm_connector_helper_add(connector,
+ &ch7033_connector_helper_funcs);
+ ret = drm_connector_init_with_ddc(bridge->dev, &priv->connector,
+ &ch7033_connector_funcs,
+ priv->next_bridge->type,
+ priv->next_bridge->ddc);
+ if (ret) {
+ DRM_ERROR("Failed to initialize connector\n");
+ return ret;
+ }
+
+ drm_connector_attach_encoder(&priv->connector, bridge->encoder);
+ return 0;
+}
+
+static void ch7033_bridge_detach(struct drm_bridge *bridge)
+{
+ struct ch7033_priv *priv = bridge_to_ch7033_priv(bridge);
+
+ if (priv->next_bridge->ops & DRM_BRIDGE_OP_HPD)
+ drm_bridge_hpd_disable(priv->next_bridge);
+ drm_connector_cleanup(&priv->connector);
+}
+
+static enum drm_mode_status ch7033_bridge_mode_valid(struct drm_bridge *bridge,
+ const struct drm_display_mode *mode)
+{
+ if (mode->clock > 165000)
+ return MODE_CLOCK_HIGH;
+ if (mode->hdisplay >= 1920)
+ return MODE_BAD_HVALUE;
+ if (mode->vdisplay >= 1080)
+ return MODE_BAD_VVALUE;
+ return MODE_OK;
+}
+
+static void ch7033_bridge_disable(struct drm_bridge *bridge)
+{
+ struct ch7033_priv *priv = bridge_to_ch7033_priv(bridge);
+
+ regmap_write(priv->regmap, 0x03, 0x04);
+ regmap_update_bits(priv->regmap, 0x52, RESETDB, 0x00);
+}
+
+static void ch7033_bridge_enable(struct drm_bridge *bridge)
+{
+ struct ch7033_priv *priv = bridge_to_ch7033_priv(bridge);
+
+ regmap_write(priv->regmap, 0x03, 0x04);
+ regmap_update_bits(priv->regmap, 0x52, RESETDB, RESETDB);
+}
+
+static void ch7033_bridge_mode_set(struct drm_bridge *bridge,
+ const struct drm_display_mode *mode,
+ const struct drm_display_mode *adjusted_mode)
+{
+ struct ch7033_priv *priv = bridge_to_ch7033_priv(bridge);
+ int hbporch = mode->hsync_start - mode->hdisplay;
+ int hsynclen = mode->hsync_end - mode->hsync_start;
+ int vbporch = mode->vsync_start - mode->vdisplay;
+ int vsynclen = mode->vsync_end - mode->vsync_start;
+
+ /*
+ * Page 4
+ */
+ regmap_write(priv->regmap, 0x03, 0x04);
+
+ /* Turn everything off to set all the registers to their defaults. */
+ regmap_write(priv->regmap, 0x52, 0x00);
+ /* Bring I/O block up. */
+ regmap_write(priv->regmap, 0x52, RESETIB);
+
+ /*
+ * Page 0
+ */
+ regmap_write(priv->regmap, 0x03, 0x00);
+
+ /* Bring up parts we need from the power down. */
+ regmap_update_bits(priv->regmap, 0x07, DRI_PD | IO_PD, 0);
+ regmap_update_bits(priv->regmap, 0x08, DRI_PDDRI | PDDAC | PANEN, 0);
+ regmap_update_bits(priv->regmap, 0x09, DPD | GCKOFF |
+ HDMI_PD | VGA_PD, 0);
+ regmap_update_bits(priv->regmap, 0x0a, HD_DVIB, 0);
+
+ /* Horizontal input timing. */
+ regmap_write(priv->regmap, 0x0b, (mode->htotal >> 8) << 3 |
+ (mode->hdisplay >> 8));
+ regmap_write(priv->regmap, 0x0c, mode->hdisplay);
+ regmap_write(priv->regmap, 0x0d, mode->htotal);
+ regmap_write(priv->regmap, 0x0e, (hsynclen >> 8) << 3 |
+ (hbporch >> 8));
+ regmap_write(priv->regmap, 0x0f, hbporch);
+ regmap_write(priv->regmap, 0x10, hsynclen);
+
+ /* Vertical input timing. */
+ regmap_write(priv->regmap, 0x11, (mode->vtotal >> 8) << 3 |
+ (mode->vdisplay >> 8));
+ regmap_write(priv->regmap, 0x12, mode->vdisplay);
+ regmap_write(priv->regmap, 0x13, mode->vtotal);
+ regmap_write(priv->regmap, 0x14, ((vsynclen >> 8) << 3) |
+ (vbporch >> 8));
+ regmap_write(priv->regmap, 0x15, vbporch);
+ regmap_write(priv->regmap, 0x16, vsynclen);
+
+ /* Input color swap. */
+ regmap_update_bits(priv->regmap, 0x18, SWAP, BYTE_SWAP_BGR);
+
+ /* Input clock and sync polarity. */
+ regmap_update_bits(priv->regmap, 0x19, 0x1, mode->clock >> 16);
+ regmap_update_bits(priv->regmap, 0x19, HPO_I | VPO_I | GCLKFREQ,
+ (mode->flags & DRM_MODE_FLAG_PHSYNC) ? HPO_I : 0 |
+ (mode->flags & DRM_MODE_FLAG_PVSYNC) ? VPO_I : 0 |
+ mode->clock >> 16);
+ regmap_write(priv->regmap, 0x1a, mode->clock >> 8);
+ regmap_write(priv->regmap, 0x1b, mode->clock);
+
+ /* Horizontal output timing. */
+ regmap_write(priv->regmap, 0x1f, (mode->htotal >> 8) << 3 |
+ (mode->hdisplay >> 8));
+ regmap_write(priv->regmap, 0x20, mode->hdisplay);
+ regmap_write(priv->regmap, 0x21, mode->htotal);
+
+ /* Vertical output timing. */
+ regmap_write(priv->regmap, 0x25, (mode->vtotal >> 8) << 3 |
+ (mode->vdisplay >> 8));
+ regmap_write(priv->regmap, 0x26, mode->vdisplay);
+ regmap_write(priv->regmap, 0x27, mode->vtotal);
+
+ /* VGA channel bypass */
+ regmap_update_bits(priv->regmap, 0x2b, VFMT, 9);
+
+ /* Output sync polarity. */
+ regmap_update_bits(priv->regmap, 0x2e, HPO_O | VPO_O,
+ (mode->flags & DRM_MODE_FLAG_PHSYNC) ? HPO_O : 0 |
+ (mode->flags & DRM_MODE_FLAG_PVSYNC) ? VPO_O : 0);
+
+ /* HDMI horizontal output timing. */
+ regmap_update_bits(priv->regmap, 0x54, HWO_HDMI_HI | HOO_HDMI_HI,
+ (hsynclen >> 8) << 3 |
+ (hbporch >> 8));
+ regmap_write(priv->regmap, 0x55, hbporch);
+ regmap_write(priv->regmap, 0x56, hsynclen);
+
+ /* HDMI vertical output timing. */
+ regmap_update_bits(priv->regmap, 0x57, VWO_HDMI_HI | VOO_HDMI_HI,
+ (vsynclen >> 8) << 3 |
+ (vbporch >> 8));
+ regmap_write(priv->regmap, 0x58, vbporch);
+ regmap_write(priv->regmap, 0x59, vsynclen);
+
+ /* Pick HDMI, not LVDS. */
+ regmap_update_bits(priv->regmap, 0x7e, HDMI_LVDS_SEL, HDMI_LVDS_SEL);
+
+ /*
+ * Page 1
+ */
+ regmap_write(priv->regmap, 0x03, 0x01);
+
+ /* No idea what these do, but VGA is wobbly and blinky without them. */
+ regmap_update_bits(priv->regmap, 0x07, CKINV, CKINV);
+ regmap_update_bits(priv->regmap, 0x08, DISPON, DISPON);
+
+ /* DRI PLL */
+ regmap_update_bits(priv->regmap, 0x0c, DRI_PLL_DIVSEL, DRI_PLL_DIVSEL);
+ if (mode->clock <= 40000) {
+ regmap_update_bits(priv->regmap, 0x0c, DRI_PLL_N1_1 |
+ DRI_PLL_N1_0 |
+ DRI_PLL_N3_1 |
+ DRI_PLL_N3_0,
+ 0);
+ } else if (mode->clock < 80000) {
+ regmap_update_bits(priv->regmap, 0x0c, DRI_PLL_N1_1 |
+ DRI_PLL_N1_0 |
+ DRI_PLL_N3_1 |
+ DRI_PLL_N3_0,
+ DRI_PLL_N3_0 |
+ DRI_PLL_N1_0);
+ } else {
+ regmap_update_bits(priv->regmap, 0x0c, DRI_PLL_N1_1 |
+ DRI_PLL_N1_0 |
+ DRI_PLL_N3_1 |
+ DRI_PLL_N3_0,
+ DRI_PLL_N3_1 |
+ DRI_PLL_N1_1);
+ }
+
+ /* This seems to be color calibration for VGA. */
+ regmap_write(priv->regmap, 0x64, 0x29); /* LSB Blue */
+ regmap_write(priv->regmap, 0x65, 0x29); /* LSB Green */
+ regmap_write(priv->regmap, 0x66, 0x29); /* LSB Red */
+ regmap_write(priv->regmap, 0x67, 0x00); /* MSB Blue */
+ regmap_write(priv->regmap, 0x68, 0x00); /* MSB Green */
+ regmap_write(priv->regmap, 0x69, 0x00); /* MSB Red */
+
+ regmap_update_bits(priv->regmap, 0x6b, DRI_PD_SER, 0x00);
+ regmap_update_bits(priv->regmap, 0x6c, DRI_PLL_PD, 0x00);
+
+ /*
+ * Page 3
+ */
+ regmap_write(priv->regmap, 0x03, 0x03);
+
+ /* More bypasses and apparently another HDMI/LVDS selector. */
+ regmap_update_bits(priv->regmap, 0x28, VGACLK_BP | HM_LV_SEL,
+ VGACLK_BP | HM_LV_SEL);
+ regmap_update_bits(priv->regmap, 0x2a, HDMICLK_BP | HDMI_BP,
+ HDMICLK_BP | HDMI_BP);
+
+ /*
+ * Page 4
+ */
+ regmap_write(priv->regmap, 0x03, 0x04);
+
+ /* Output clock. */
+ regmap_write(priv->regmap, 0x10, mode->clock >> 16);
+ regmap_write(priv->regmap, 0x11, mode->clock >> 8);
+ regmap_write(priv->regmap, 0x12, mode->clock);
+}
+
+static const struct drm_bridge_funcs ch7033_bridge_funcs = {
+ .attach = ch7033_bridge_attach,
+ .detach = ch7033_bridge_detach,
+ .mode_valid = ch7033_bridge_mode_valid,
+ .disable = ch7033_bridge_disable,
+ .enable = ch7033_bridge_enable,
+ .mode_set = ch7033_bridge_mode_set,
+};
+
+static void ch7033_encoder_destroy(struct drm_encoder *encoder)
+{
+ drm_encoder_cleanup(encoder);
+}
+
+static const struct drm_encoder_funcs ch7033_encoder_funcs = {
+ .destroy = ch7033_encoder_destroy,
+};
+
+static int ch7033_bind(struct device *dev, struct device *master,
+ void *data)
+{
+ struct drm_device *drm = data;
+ struct ch7033_priv *priv = dev_get_drvdata(dev);
+ uint32_t crtcs;
+ int ret;
+
+ crtcs = drm_of_find_possible_crtcs(drm, dev->of_node);
+ priv->encoder.possible_crtcs = crtcs;
+
+ ret = drm_encoder_init(drm, &priv->encoder, &ch7033_encoder_funcs,
+ DRM_MODE_ENCODER_TMDS, NULL);
+ if (ret)
+ return ret;
+
+ ret = drm_bridge_attach(&priv->encoder, &priv->bridge, NULL, 0);
+ if (ret)
+ drm_encoder_cleanup(&priv->encoder);
+
+ return ret;
+}
+
+static void ch7033_unbind(struct device *dev, struct device *master,
+ void *data)
+{
+ struct ch7033_priv *priv = dev_get_drvdata(dev);
+
+ drm_encoder_cleanup(&priv->encoder);
+}
+
+static const struct regmap_config ch7033_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = 0x7f,
+};
+
+static const struct component_ops ch7033_ops = {
+ .bind = ch7033_bind,
+ .unbind = ch7033_unbind,
+};
+
+static int ch7033_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct device *dev = &client->dev;
+ struct ch7033_priv *priv;
+ unsigned int val;
+ int ret;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ dev_set_drvdata(dev, priv);
+
+ ret = drm_of_find_panel_or_bridge(dev->of_node, 1, -1, NULL,
+ &priv->next_bridge);
+ if (ret)
+ return ret;
+
+ priv->regmap = devm_regmap_init_i2c(client, &ch7033_regmap_config);
+ if (IS_ERR(priv->regmap)) {
+ dev_err(&client->dev, "regmap init failed\n");
+ return PTR_ERR(priv->regmap);
+ }
+
+ ret = regmap_read(priv->regmap, 0x00, &val);
+ if (ret < 0) {
+ dev_err(&client->dev, "error reading the model id: %d\n", ret);
+ return ret;
+ }
+ if ((val & 0xf7) != 0x56) {
+ dev_err(&client->dev, "the device is not a ch7033\n");
+ return -ENODEV;
+ }
+
+ regmap_write(priv->regmap, 0x03, 0x04);
+ ret = regmap_read(priv->regmap, 0x51, &val);
+ if (ret < 0) {
+ dev_err(&client->dev, "error reading the model id: %d\n", ret);
+ return ret;
+ }
+ if ((val & 0x0f) != 3) {
+ dev_err(&client->dev, "unknown revision %u\n", val);
+ return -ENODEV;
+ }
+
+ INIT_LIST_HEAD(&priv->bridge.list);
+ priv->bridge.funcs = &ch7033_bridge_funcs;
+ priv->bridge.of_node = dev->of_node;
+ drm_bridge_add(&priv->bridge);
+
+ ret = component_add(dev, &ch7033_ops);
+ if (ret) {
+ drm_bridge_remove(&priv->bridge);
+ return ret;
+ }
+
+ dev_info(dev, "Chrontel CH7033 Video Encoder\n");
+ return 0;
+}
+
+static int ch7033_remove(struct i2c_client *client)
+{
+ struct device *dev = &client->dev;
+ struct ch7033_priv *priv = dev_get_drvdata(dev);
+
+ component_del(dev, &ch7033_ops);
+ drm_bridge_remove(&priv->bridge);
+
+ return 0;
+}
+
+static const struct of_device_id ch7033_dt_ids[] = {
+ { .compatible = "chrontel,ch7033", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, ch7033_dt_ids);
+
+static const struct i2c_device_id ch7033_ids[] = {
+ { "ch7033", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, ch7033_ids);
+
+static struct i2c_driver ch7033_driver = {
+ .probe = ch7033_probe,
+ .remove = ch7033_remove,
+ .driver = {
+ .name = "ch7033",
+ .of_match_table = of_match_ptr(ch7033_dt_ids),
+ },
+ .id_table = ch7033_ids,
+};
+
+module_i2c_driver(ch7033_driver);
+
+MODULE_AUTHOR("Lubomir Rintel <lkundrak@v3.sk>");
+MODULE_DESCRIPTION("Chrontel CH7033 Video Encoder Driver");
+MODULE_LICENSE("GPL v2");
This is a driver for video encoder with VGA and DVI/HDMI outputs. There is no documentation for the chip -- the operation was guessed from what was sniffed on a Dell Wyse 3020 ThinOS terminal, the register names come from the ch7035 driver in Mediatek's GPL code dump. Only bare minimum is implemented -- no fancy stuff, such as scaling. That would only worsen our misery. We don't load the firmware and we don't need to even bother enabling the MCU. There are probably no distributable firmware images anyway. Just like the tda998x driver, this one uses the component framework and adds an encoder on component bind, so that it works with the Armada DRM driver. Tested with a handful of monitors ranging from 1024x768@75 to 1400x1050@60, with VGA as well as DVI. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> --- Changes since v1: - Sort the includes - Drop a useless model id read - Chain to the bridge-connector instead of dealing with the HPD/EDID readout machinery ourselves - Utilize regmap to access the registers drivers/gpu/drm/bridge/Kconfig | 10 + drivers/gpu/drm/bridge/Makefile | 1 + drivers/gpu/drm/bridge/chrontel-ch7033.c | 675 +++++++++++++++++++++++ 3 files changed, 686 insertions(+) create mode 100644 drivers/gpu/drm/bridge/chrontel-ch7033.c