@@ -22,7 +22,9 @@
#define CTL_PREPARE 0x0d0
#define CTL_SW_RESET 0x030
#define CTL_LAYER_EXTN_OFFSET 0x40
+#define CTL_MERGE_3D_ACTIVE 0x0E4
#define CTL_INTF_ACTIVE 0x0F4
+#define CTL_MERGE_3D_FLUSH 0x100
#define CTL_INTF_FLUSH 0x110
#define CTL_INTF_MASTER 0x134
@@ -30,6 +32,7 @@
#define CTL_FLUSH_MASK_CTL BIT(17)
#define DPU_REG_RESET_TIMEOUT_US 2000
+#define MERGE_3D_IDX 23
#define INTF_IDX 31
static const struct dpu_ctl_cfg *_ctl_offset(enum dpu_ctl ctl,
@@ -112,6 +115,9 @@ static u32 dpu_hw_ctl_get_pending_flush(struct dpu_hw_ctl *ctx)
static inline void dpu_hw_ctl_trigger_flush_v1(struct dpu_hw_ctl *ctx)
{
+ if (ctx->pending_flush_mask & BIT(MERGE_3D_IDX))
+ DPU_REG_WRITE(&ctx->hw, CTL_MERGE_3D_FLUSH,
+ ctx->pending_merge_3d_flush_mask);
if (ctx->pending_flush_mask & BIT(INTF_IDX))
DPU_REG_WRITE(&ctx->hw, CTL_INTF_FLUSH,
ctx->pending_intf_flush_mask);
@@ -242,6 +248,13 @@ static void dpu_hw_ctl_update_pending_flush_intf_v1(struct dpu_hw_ctl *ctx,
ctx->pending_flush_mask |= BIT(INTF_IDX);
}
+static void dpu_hw_ctl_update_pending_flush_merge_3d_v1(struct dpu_hw_ctl *ctx,
+ enum dpu_merge_3d merge_3d)
+{
+ ctx->pending_merge_3d_flush_mask |= BIT(merge_3d - MERGE_3D_0);
+ ctx->pending_flush_mask |= BIT(MERGE_3D_IDX);
+}
+
static uint32_t dpu_hw_ctl_get_bitmask_dspp(struct dpu_hw_ctl *ctx,
enum dpu_dspp dspp)
{
@@ -483,6 +496,7 @@ static void dpu_hw_ctl_intf_cfg_v1(struct dpu_hw_ctl *ctx,
DPU_REG_WRITE(c, CTL_TOP, mode_sel);
DPU_REG_WRITE(c, CTL_INTF_ACTIVE, intf_active);
+ DPU_REG_WRITE(c, CTL_MERGE_3D_ACTIVE, BIT(cfg->merge_3d - MERGE_3D_0));
}
static void dpu_hw_ctl_intf_cfg(struct dpu_hw_ctl *ctx,
@@ -523,6 +537,8 @@ static void _setup_ctl_ops(struct dpu_hw_ctl_ops *ops,
ops->setup_intf_cfg = dpu_hw_ctl_intf_cfg_v1;
ops->update_pending_flush_intf =
dpu_hw_ctl_update_pending_flush_intf_v1;
+ ops->update_pending_flush_merge_3d =
+ dpu_hw_ctl_update_pending_flush_merge_3d_v1;
} else {
ops->trigger_flush = dpu_hw_ctl_trigger_flush;
ops->setup_intf_cfg = dpu_hw_ctl_intf_cfg;
@@ -37,12 +37,14 @@ struct dpu_hw_stage_cfg {
* struct dpu_hw_intf_cfg :Describes how the DPU writes data to output interface
* @intf : Interface id
* @mode_3d: 3d mux configuration
+ * @merge_3d: 3d merge block used
* @intf_mode_sel: Interface mode, cmd / vid
* @stream_sel: Stream selection for multi-stream interfaces
*/
struct dpu_hw_intf_cfg {
enum dpu_intf intf;
enum dpu_3d_blend_mode mode_3d;
+ enum dpu_merge_3d merge_3d;
enum dpu_ctl_mode_sel intf_mode_sel;
int stream_sel;
};
@@ -99,6 +101,15 @@ struct dpu_hw_ctl_ops {
void (*update_pending_flush_intf)(struct dpu_hw_ctl *ctx,
enum dpu_intf blk);
+ /**
+ * OR in the given flushbits to the cached pending_(merge_3d_)flush_mask
+ * No effect on hardware
+ * @ctx : ctl path ctx pointer
+ * @blk : interface block index
+ */
+ void (*update_pending_flush_merge_3d)(struct dpu_hw_ctl *ctx,
+ enum dpu_merge_3d blk);
+
/**
* Write the value of the pending_flush_mask to hardware
* @ctx : ctl path ctx pointer
@@ -181,6 +192,7 @@ struct dpu_hw_ctl {
const struct dpu_lm_cfg *mixer_hw_caps;
u32 pending_flush_mask;
u32 pending_intf_flush_mask;
+ u32 pending_merge_3d_flush_mask;
/* ops */
struct dpu_hw_ctl_ops ops;
Active HW CTL blocks need separate handling for merge_3d flushes. Implement necessary merge_3d configuration and flushing. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c | 16 ++++++++++++++++ drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h | 12 ++++++++++++ 2 files changed, 28 insertions(+)