diff mbox series

[4/5] drm/panel: s6e63m0: Support 3WIRE protocol

Message ID 20201110234653.2248594-5-linus.walleij@linaro.org (mailing list archive)
State New, archived
Headers show
Series Samsung s6e63m0 improvements | expand

Commit Message

Linus Walleij Nov. 10, 2020, 11:46 p.m. UTC 
The panel can be connected using 3WIRE, then it is
however necessary that the flag SPI_3WIRE is preserved
on the device, as we set this from generic device tree
parsing code (or similar). Just |= the SPI mode.

Cc: Stephan Gerhold <stephan@gerhold.net>
Cc: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
 drivers/gpu/drm/panel/panel-samsung-s6e63m0-spi.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/gpu/drm/panel/panel-samsung-s6e63m0-spi.c b/drivers/gpu/drm/panel/panel-samsung-s6e63m0-spi.c
index e47647f418ff..b1adf8f89c62 100644
--- a/drivers/gpu/drm/panel/panel-samsung-s6e63m0-spi.c
+++ b/drivers/gpu/drm/panel/panel-samsung-s6e63m0-spi.c
@@ -72,7 +72,8 @@  static int s6e63m0_spi_probe(struct spi_device *spi)
 	int ret;
 
 	spi->bits_per_word = 9;
-	spi->mode = SPI_MODE_3;
+	/* Preserve e.g. SPI_3WIRE setting */
+	spi->mode |= SPI_MODE_3;
 	ret = spi_setup(spi);
 	if (ret < 0) {
 		dev_err(dev, "spi setup failed.\n");