| Message ID | 20210220060811.2500081-1-hsinyi@chromium.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [RESEND,v3,1/2] dt-bindings: drm/bridge: anx7625: Add power supplies | expand |
Hey Hsin-Yi, Thanks for the patch, and sorry about the delays in reviewing this. This patch does not apply to the drm-misc/for-linux-next branch due to some other changes having been merged. On Sat, 20 Feb 2021 at 07:10, Hsin-Yi Wang <hsinyi@chromium.org> wrote: > > anx7625 requires 3 power supply regulators. > > Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> > Reviewed-by: Rob Herring <robh@kernel.org> > --- > .../bindings/display/bridge/analogix,anx7625.yaml | 15 +++++++++++++++ > 1 file changed, 15 insertions(+) > > diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml > index 60585a4fc22bc..3ae97d9523e56 100644 > --- a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml > +++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml > @@ -34,6 +34,15 @@ properties: > description: used for reset chip control, RESET_N pin B7. > maxItems: 1 > > + vdd10-supply: > + description: Regulator that provides the supply 1.0V power. > + > + vdd18-supply: > + description: Regulator that provides the supply 1.8V power. > + > + vdd33-supply: > + description: Regulator that provides the supply 3.3V power. > + This chunk below has seen some changes. With this patch fixed, feel free to add my r-b. Reviewed-by: Robert Foss <robert.foss@linaro.org> > ports: > type: object > > @@ -55,6 +64,9 @@ properties: > required: > - compatible > - reg > + - vdd10-supply > + - vdd18-supply > + - vdd33-supply > - ports > > additionalProperties: false > @@ -72,6 +84,9 @@ examples: > reg = <0x58>; > enable-gpios = <&pio 45 GPIO_ACTIVE_HIGH>; > reset-gpios = <&pio 73 GPIO_ACTIVE_HIGH>; > + vdd10-supply = <&pp1000_mipibrdg>; > + vdd18-supply = <&pp1800_mipibrdg>; > + vdd33-supply = <&pp3300_mipibrdg>; > > ports { > #address-cells = <1>; > -- > 2.30.0.617.g56c4b15f3c-goog >
diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml index 60585a4fc22bc..3ae97d9523e56 100644 --- a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml +++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml @@ -34,6 +34,15 @@ properties: description: used for reset chip control, RESET_N pin B7. maxItems: 1 + vdd10-supply: + description: Regulator that provides the supply 1.0V power. + + vdd18-supply: + description: Regulator that provides the supply 1.8V power. + + vdd33-supply: + description: Regulator that provides the supply 3.3V power. + ports: type: object @@ -55,6 +64,9 @@ properties: required: - compatible - reg + - vdd10-supply + - vdd18-supply + - vdd33-supply - ports additionalProperties: false @@ -72,6 +84,9 @@ examples: reg = <0x58>; enable-gpios = <&pio 45 GPIO_ACTIVE_HIGH>; reset-gpios = <&pio 73 GPIO_ACTIVE_HIGH>; + vdd10-supply = <&pp1000_mipibrdg>; + vdd18-supply = <&pp1800_mipibrdg>; + vdd33-supply = <&pp3300_mipibrdg>; ports { #address-cells = <1>;