@@ -35,8 +35,6 @@ struct msm_dsi_phy_ops {
};
struct msm_dsi_pll_ops {
- int (*enable_seq)(struct msm_dsi_pll *pll);
- void (*disable_seq)(struct msm_dsi_pll *pll);
void (*save_state)(struct msm_dsi_pll *pll);
int (*restore_state)(struct msm_dsi_pll *pll);
};
@@ -652,12 +652,58 @@ static unsigned long dsi_pll_14nm_vco_recalc_rate(struct clk_hw *hw,
return (unsigned long)vco_rate;
}
+static int dsi_pll_14nm_vco_prepare(struct clk_hw *hw)
+{
+ struct msm_dsi_pll *pll = hw_clk_to_pll(hw);
+ struct dsi_pll_14nm *pll_14nm = to_pll_14nm(pll);
+ void __iomem *base = pll_14nm->mmio;
+ void __iomem *cmn_base = pll_14nm->phy_cmn_mmio;
+ bool locked;
+
+ DBG("");
+
+ if (unlikely(pll->pll_on))
+ return 0;
+
+ pll_write(base + REG_DSI_14nm_PHY_PLL_VREF_CFG1, 0x10);
+ pll_write(cmn_base + REG_DSI_14nm_PHY_CMN_PLL_CNTRL, 1);
+
+ locked = pll_14nm_poll_for_ready(pll_14nm, POLL_MAX_READS,
+ POLL_TIMEOUT_US);
+
+ if (unlikely(!locked)) {
+ DRM_DEV_ERROR(&pll_14nm->pdev->dev, "DSI PLL lock failed\n");
+ return -EINVAL;
+ }
+
+ DBG("DSI PLL lock success");
+ pll->pll_on = true;
+
+ return 0;
+}
+
+static void dsi_pll_14nm_vco_unprepare(struct clk_hw *hw)
+{
+ struct msm_dsi_pll *pll = hw_clk_to_pll(hw);
+ struct dsi_pll_14nm *pll_14nm = to_pll_14nm(pll);
+ void __iomem *cmn_base = pll_14nm->phy_cmn_mmio;
+
+ DBG("");
+
+ if (unlikely(!pll->pll_on))
+ return;
+
+ pll_write(cmn_base + REG_DSI_14nm_PHY_CMN_PLL_CNTRL, 0);
+
+ pll->pll_on = false;
+}
+
static const struct clk_ops clk_ops_dsi_pll_14nm_vco = {
.round_rate = msm_dsi_pll_helper_clk_round_rate,
.set_rate = dsi_pll_14nm_vco_set_rate,
.recalc_rate = dsi_pll_14nm_vco_recalc_rate,
- .prepare = msm_dsi_pll_helper_clk_prepare,
- .unprepare = msm_dsi_pll_helper_clk_unprepare,
+ .prepare = dsi_pll_14nm_vco_prepare,
+ .unprepare = dsi_pll_14nm_vco_unprepare,
};
/*
@@ -749,39 +795,6 @@ static const struct clk_ops clk_ops_dsi_pll_14nm_postdiv = {
* PLL Callbacks
*/
-static int dsi_pll_14nm_enable_seq(struct msm_dsi_pll *pll)
-{
- struct dsi_pll_14nm *pll_14nm = to_pll_14nm(pll);
- void __iomem *base = pll_14nm->mmio;
- void __iomem *cmn_base = pll_14nm->phy_cmn_mmio;
- bool locked;
-
- DBG("");
-
- pll_write(base + REG_DSI_14nm_PHY_PLL_VREF_CFG1, 0x10);
- pll_write(cmn_base + REG_DSI_14nm_PHY_CMN_PLL_CNTRL, 1);
-
- locked = pll_14nm_poll_for_ready(pll_14nm, POLL_MAX_READS,
- POLL_TIMEOUT_US);
-
- if (unlikely(!locked))
- DRM_DEV_ERROR(&pll_14nm->pdev->dev, "DSI PLL lock failed\n");
- else
- DBG("DSI PLL lock success");
-
- return locked ? 0 : -EINVAL;
-}
-
-static void dsi_pll_14nm_disable_seq(struct msm_dsi_pll *pll)
-{
- struct dsi_pll_14nm *pll_14nm = to_pll_14nm(pll);
- void __iomem *cmn_base = pll_14nm->phy_cmn_mmio;
-
- DBG("");
-
- pll_write(cmn_base + REG_DSI_14nm_PHY_CMN_PLL_CNTRL, 0);
-}
-
static void dsi_pll_14nm_save_state(struct msm_dsi_pll *pll)
{
struct dsi_pll_14nm *pll_14nm = to_pll_14nm(pll);
@@ -1158,8 +1171,6 @@ const struct msm_dsi_phy_cfg dsi_phy_14nm_cfgs = {
.pll_ops = {
.save_state = dsi_pll_14nm_save_state,
.restore_state = dsi_pll_14nm_restore_state,
- .disable_seq = dsi_pll_14nm_disable_seq,
- .enable_seq = dsi_pll_14nm_enable_seq,
},
.min_pll_rate = VCO_MIN_RATE,
.max_pll_rate = VCO_MAX_RATE,
@@ -1185,8 +1196,6 @@ const struct msm_dsi_phy_cfg dsi_phy_14nm_660_cfgs = {
.pll_ops = {
.save_state = dsi_pll_14nm_save_state,
.restore_state = dsi_pll_14nm_restore_state,
- .disable_seq = dsi_pll_14nm_disable_seq,
- .enable_seq = dsi_pll_14nm_enable_seq,
},
.min_pll_rate = VCO_MIN_RATE,
.max_pll_rate = VCO_MAX_RATE,
@@ -286,19 +286,7 @@ static unsigned long dsi_pll_28nm_clk_recalc_rate(struct clk_hw *hw,
return vco_rate;
}
-static const struct clk_ops clk_ops_dsi_pll_28nm_vco = {
- .round_rate = msm_dsi_pll_helper_clk_round_rate,
- .set_rate = dsi_pll_28nm_clk_set_rate,
- .recalc_rate = dsi_pll_28nm_clk_recalc_rate,
- .prepare = msm_dsi_pll_helper_clk_prepare,
- .unprepare = msm_dsi_pll_helper_clk_unprepare,
- .is_enabled = dsi_pll_28nm_clk_is_enabled,
-};
-
-/*
- * PLL Callbacks
- */
-static int _dsi_pll_28nm_enable_seq_hpm(struct msm_dsi_pll *pll)
+static int _dsi_pll_28nm_vco_prepare_hpm(struct msm_dsi_pll *pll)
{
struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll);
struct device *dev = &pll_28nm->pdev->dev;
@@ -373,21 +361,28 @@ static int _dsi_pll_28nm_enable_seq_hpm(struct msm_dsi_pll *pll)
return locked ? 0 : -EINVAL;
}
-static int dsi_pll_28nm_enable_seq_hpm(struct msm_dsi_pll *pll)
+static int dsi_pll_28nm_vco_prepare_hpm(struct clk_hw *hw)
{
+ struct msm_dsi_pll *pll = hw_clk_to_pll(hw);
int i, ret;
+ if (unlikely(pll->pll_on))
+ return 0;
+
for (i = 0; i < 3; i++) {
- ret = _dsi_pll_28nm_enable_seq_hpm(pll);
- if (!ret)
+ ret = _dsi_pll_28nm_vco_prepare_hpm(pll);
+ if (!ret) {
+ pll->pll_on = true;
return 0;
+ }
}
return ret;
}
-static int dsi_pll_28nm_enable_seq_lp(struct msm_dsi_pll *pll)
+static int dsi_pll_28nm_vco_prepare_lp(struct clk_hw *hw)
{
+ struct msm_dsi_pll *pll = hw_clk_to_pll(hw);
struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll);
struct device *dev = &pll_28nm->pdev->dev;
void __iomem *base = pll_28nm->mmio;
@@ -397,6 +392,9 @@ static int dsi_pll_28nm_enable_seq_lp(struct msm_dsi_pll *pll)
DBG("id=%d", pll_28nm->id);
+ if (unlikely(pll->pll_on))
+ return 0;
+
pll_28nm_software_reset(pll_28nm);
/*
@@ -421,22 +419,54 @@ static int dsi_pll_28nm_enable_seq_lp(struct msm_dsi_pll *pll)
locked = pll_28nm_poll_for_ready(pll_28nm, max_reads, timeout_us);
- if (unlikely(!locked))
+ if (unlikely(!locked)) {
DRM_DEV_ERROR(dev, "DSI PLL lock failed\n");
- else
- DBG("DSI PLL lock success");
+ return -EINVAL;
+ }
- return locked ? 0 : -EINVAL;
+ DBG("DSI PLL lock success");
+ pll->pll_on = true;
+
+ return 0;
}
-static void dsi_pll_28nm_disable_seq(struct msm_dsi_pll *pll)
+static void dsi_pll_28nm_vco_unprepare(struct clk_hw *hw)
{
+ struct msm_dsi_pll *pll = hw_clk_to_pll(hw);
struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll);
DBG("id=%d", pll_28nm->id);
+
+ if (unlikely(!pll->pll_on))
+ return;
+
pll_write(pll_28nm->mmio + REG_DSI_28nm_PHY_PLL_GLB_CFG, 0x00);
+
+ pll->pll_on = false;
}
+static const struct clk_ops clk_ops_dsi_pll_28nm_vco_hpm = {
+ .round_rate = msm_dsi_pll_helper_clk_round_rate,
+ .set_rate = dsi_pll_28nm_clk_set_rate,
+ .recalc_rate = dsi_pll_28nm_clk_recalc_rate,
+ .prepare = dsi_pll_28nm_vco_prepare_hpm,
+ .unprepare = dsi_pll_28nm_vco_unprepare,
+ .is_enabled = dsi_pll_28nm_clk_is_enabled,
+};
+
+static const struct clk_ops clk_ops_dsi_pll_28nm_vco_lp = {
+ .round_rate = msm_dsi_pll_helper_clk_round_rate,
+ .set_rate = dsi_pll_28nm_clk_set_rate,
+ .recalc_rate = dsi_pll_28nm_clk_recalc_rate,
+ .prepare = dsi_pll_28nm_vco_prepare_lp,
+ .unprepare = dsi_pll_28nm_vco_unprepare,
+ .is_enabled = dsi_pll_28nm_clk_is_enabled,
+};
+
+/*
+ * PLL Callbacks
+ */
+
static void dsi_pll_28nm_save_state(struct msm_dsi_pll *pll)
{
struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll);
@@ -479,7 +509,7 @@ static int dsi_pll_28nm_restore_state(struct msm_dsi_pll *pll)
return 0;
}
-static int pll_28nm_register(struct dsi_pll_28nm *pll_28nm, struct clk_hw_onecell_data *provided_clocks)
+static int pll_28nm_register(struct dsi_pll_28nm *pll_28nm, struct clk_hw_onecell_data *provided_clocks, const struct clk_ops *vco_ops)
{
char clk_name[32], parent1[32], parent2[32], vco_name[32];
struct clk_init_data vco_init = {
@@ -487,7 +517,7 @@ static int pll_28nm_register(struct dsi_pll_28nm *pll_28nm, struct clk_hw_onecel
.num_parents = 1,
.name = vco_name,
.flags = CLK_IGNORE_UNUSED,
- .ops = &clk_ops_dsi_pll_28nm_vco,
+ .ops = vco_ops,
};
struct device *dev = &pll_28nm->pdev->dev;
struct clk_hw *hw;
@@ -579,7 +609,7 @@ static int dsi_pll_28nm_hpm_init(struct msm_dsi_phy *phy)
pll->cfg = phy->cfg;
- ret = pll_28nm_register(pll_28nm, phy->provided_clocks);
+ ret = pll_28nm_register(pll_28nm, phy->provided_clocks, &clk_ops_dsi_pll_28nm_vco_hpm);
if (ret) {
DRM_DEV_ERROR(&pdev->dev, "failed to register PLL: %d\n", ret);
return ret;
@@ -618,7 +648,7 @@ static int dsi_pll_28nm_lp_init(struct msm_dsi_phy *phy)
pll->cfg = phy->cfg;
- ret = pll_28nm_register(pll_28nm, phy->provided_clocks);
+ ret = pll_28nm_register(pll_28nm, phy->provided_clocks, &clk_ops_dsi_pll_28nm_vco_lp);
if (ret) {
DRM_DEV_ERROR(&pdev->dev, "failed to register PLL: %d\n", ret);
return ret;
@@ -792,8 +822,6 @@ const struct msm_dsi_phy_cfg dsi_phy_28nm_hpm_cfgs = {
.pll_ops = {
.save_state = dsi_pll_28nm_save_state,
.restore_state = dsi_pll_28nm_restore_state,
- .disable_seq = dsi_pll_28nm_disable_seq,
- .enable_seq = dsi_pll_28nm_enable_seq_hpm,
},
.min_pll_rate = VCO_MIN_RATE,
.max_pll_rate = VCO_MAX_RATE,
@@ -819,8 +847,6 @@ const struct msm_dsi_phy_cfg dsi_phy_28nm_hpm_famb_cfgs = {
.pll_ops = {
.save_state = dsi_pll_28nm_save_state,
.restore_state = dsi_pll_28nm_restore_state,
- .disable_seq = dsi_pll_28nm_disable_seq,
- .enable_seq = dsi_pll_28nm_enable_seq_hpm,
},
.min_pll_rate = VCO_MIN_RATE,
.max_pll_rate = VCO_MAX_RATE,
@@ -846,8 +872,6 @@ const struct msm_dsi_phy_cfg dsi_phy_28nm_lp_cfgs = {
.pll_ops = {
.save_state = dsi_pll_28nm_save_state,
.restore_state = dsi_pll_28nm_restore_state,
- .disable_seq = dsi_pll_28nm_disable_seq,
- .enable_seq = dsi_pll_28nm_enable_seq_lp,
},
.min_pll_rate = VCO_MIN_RATE,
.max_pll_rate = VCO_MAX_RATE,
@@ -178,12 +178,76 @@ static unsigned long dsi_pll_28nm_clk_recalc_rate(struct clk_hw *hw,
return vco_rate;
}
+static int dsi_pll_28nm_vco_prepare(struct clk_hw *hw)
+{
+ struct msm_dsi_pll *pll = hw_clk_to_pll(hw);
+ struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll);
+ struct device *dev = &pll_28nm->pdev->dev;
+ void __iomem *base = pll_28nm->mmio;
+ bool locked;
+ unsigned int bit_div, byte_div;
+ int max_reads = 1000, timeout_us = 100;
+ u32 val;
+
+ DBG("id=%d", pll_28nm->id);
+
+ if (unlikely(pll->pll_on))
+ return 0;
+
+ /*
+ * before enabling the PLL, configure the bit clock divider since we
+ * don't expose it as a clock to the outside world
+ * 1: read back the byte clock divider that should already be set
+ * 2: divide by 8 to get bit clock divider
+ * 3: write it to POSTDIV1
+ */
+ val = pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_9);
+ byte_div = val + 1;
+ bit_div = byte_div / 8;
+
+ val = pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_8);
+ val &= ~0xf;
+ val |= (bit_div - 1);
+ pll_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_8, val);
+
+ /* enable the PLL */
+ pll_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_0,
+ DSI_28nm_8960_PHY_PLL_CTRL_0_ENABLE);
+
+ locked = pll_28nm_poll_for_ready(pll_28nm, max_reads, timeout_us);
+
+ if (unlikely(!locked)) {
+ DRM_DEV_ERROR(dev, "DSI PLL lock failed\n");
+ return -EINVAL;
+ }
+
+ DBG("DSI PLL lock success");
+ pll->pll_on = true;
+
+ return 0;
+}
+
+static void dsi_pll_28nm_vco_unprepare(struct clk_hw *hw)
+{
+ struct msm_dsi_pll *pll = hw_clk_to_pll(hw);
+ struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll);
+
+ DBG("id=%d", pll_28nm->id);
+
+ if (unlikely(!pll->pll_on))
+ return;
+
+ pll_write(pll_28nm->mmio + REG_DSI_28nm_8960_PHY_PLL_CTRL_0, 0x00);
+
+ pll->pll_on = false;
+}
+
static const struct clk_ops clk_ops_dsi_pll_28nm_vco = {
.round_rate = msm_dsi_pll_helper_clk_round_rate,
.set_rate = dsi_pll_28nm_clk_set_rate,
.recalc_rate = dsi_pll_28nm_clk_recalc_rate,
- .prepare = msm_dsi_pll_helper_clk_prepare,
- .unprepare = msm_dsi_pll_helper_clk_unprepare,
+ .prepare = dsi_pll_28nm_vco_prepare,
+ .unprepare = dsi_pll_28nm_vco_unprepare,
.is_enabled = dsi_pll_28nm_clk_is_enabled,
};
@@ -270,56 +334,6 @@ static const struct clk_ops clk_bytediv_ops = {
/*
* PLL Callbacks
*/
-static int dsi_pll_28nm_enable_seq(struct msm_dsi_pll *pll)
-{
- struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll);
- struct device *dev = &pll_28nm->pdev->dev;
- void __iomem *base = pll_28nm->mmio;
- bool locked;
- unsigned int bit_div, byte_div;
- int max_reads = 1000, timeout_us = 100;
- u32 val;
-
- DBG("id=%d", pll_28nm->id);
-
- /*
- * before enabling the PLL, configure the bit clock divider since we
- * don't expose it as a clock to the outside world
- * 1: read back the byte clock divider that should already be set
- * 2: divide by 8 to get bit clock divider
- * 3: write it to POSTDIV1
- */
- val = pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_9);
- byte_div = val + 1;
- bit_div = byte_div / 8;
-
- val = pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_8);
- val &= ~0xf;
- val |= (bit_div - 1);
- pll_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_8, val);
-
- /* enable the PLL */
- pll_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_0,
- DSI_28nm_8960_PHY_PLL_CTRL_0_ENABLE);
-
- locked = pll_28nm_poll_for_ready(pll_28nm, max_reads, timeout_us);
-
- if (unlikely(!locked))
- DRM_DEV_ERROR(dev, "DSI PLL lock failed\n");
- else
- DBG("DSI PLL lock success");
-
- return locked ? 0 : -EINVAL;
-}
-
-static void dsi_pll_28nm_disable_seq(struct msm_dsi_pll *pll)
-{
- struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll);
-
- DBG("id=%d", pll_28nm->id);
- pll_write(pll_28nm->mmio + REG_DSI_28nm_8960_PHY_PLL_CTRL_0, 0x00);
-}
-
static void dsi_pll_28nm_save_state(struct msm_dsi_pll *pll)
{
struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll);
@@ -653,8 +667,6 @@ const struct msm_dsi_phy_cfg dsi_phy_28nm_8960_cfgs = {
.pll_ops = {
.save_state = dsi_pll_28nm_save_state,
.restore_state = dsi_pll_28nm_restore_state,
- .disable_seq = dsi_pll_28nm_disable_seq,
- .enable_seq = dsi_pll_28nm_enable_seq,
},
.min_pll_rate = VCO_MIN_RATE,
.max_pll_rate = VCO_MAX_RATE,
@@ -21,38 +21,3 @@ long msm_dsi_pll_helper_clk_round_rate(struct clk_hw *hw,
else
return rate;
}
-
-int msm_dsi_pll_helper_clk_prepare(struct clk_hw *hw)
-{
- struct msm_dsi_pll *pll = hw_clk_to_pll(hw);
- int ret = 0;
-
- /*
- * Certain PLLs do not allow VCO rate update when it is on.
- * Keep track of their status to turn on/off after set rate success.
- */
- if (unlikely(pll->pll_on))
- return 0;
-
- ret = pll->cfg->pll_ops.enable_seq(pll);
- if (ret) {
- DRM_ERROR("DSI PLL failed to lock\n");
- return ret;
- }
-
- pll->pll_on = true;
-
- return 0;
-}
-
-void msm_dsi_pll_helper_clk_unprepare(struct clk_hw *hw)
-{
- struct msm_dsi_pll *pll = hw_clk_to_pll(hw);
-
- if (unlikely(!pll->pll_on))
- return;
-
- pll->cfg->pll_ops.disable_seq(pll);
-
- pll->pll_on = false;
-}
@@ -39,8 +39,6 @@ static inline void pll_write_ndelay(void __iomem *reg, u32 data, u32 delay_ns)
/* clock callbacks */
long msm_dsi_pll_helper_clk_round_rate(struct clk_hw *hw,
unsigned long rate, unsigned long *parent_rate);
-int msm_dsi_pll_helper_clk_prepare(struct clk_hw *hw);
-void msm_dsi_pll_helper_clk_unprepare(struct clk_hw *hw);
#endif /* __DSI_PLL_H__ */
10nm and 7nm already do not use these helpers, as they handle setting slave DSI clocks after enabling VCO. Modify the rest of PHY drivers to remove unnecessary indirection and drop enable_seq/disable_seq PLL callbacks. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- drivers/gpu/drm/msm/dsi/phy/dsi_phy.h | 2 - drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c | 87 +++++++------ drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c | 88 ++++++++----- .../gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c | 120 ++++++++++-------- drivers/gpu/drm/msm/dsi/phy/dsi_pll.c | 35 ----- drivers/gpu/drm/msm/dsi/phy/dsi_pll.h | 2 - 6 files changed, 170 insertions(+), 164 deletions(-)