| Message ID | 20210415091616.53415-1-s.riedmueller@phytec.de (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [1/3] drm/panel: Add connector_type and bus_format for AUO G104SN02 V2 panel | expand |
Hi, gentle ping for this small series. Regards, Stefan On Thu, 2021-04-15 at 11:16 +0200, Stefan Riedmueller wrote: > The AUO G104SN02 V2 is an LVDS display which supports 6 and 8 bpc PSWG. > Add the corresponding connector type and 8 bpc as default bus_format. > > Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de> > --- > drivers/gpu/drm/panel/panel-simple.c | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/drivers/gpu/drm/panel/panel-simple.c > b/drivers/gpu/drm/panel/panel-simple.c > index 4e2dad314c79..44583d0ed902 100644 > --- a/drivers/gpu/drm/panel/panel-simple.c > +++ b/drivers/gpu/drm/panel/panel-simple.c > @@ -1098,6 +1098,8 @@ static const struct panel_desc auo_g104sn02 = { > .width = 211, > .height = 158, > }, > + .bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG, > + .connector_type = DRM_MODE_CONNECTOR_LVDS, > }; > > static const struct drm_display_mode auo_g121ean01_mode = {
Hi, another gentle ping. Also adding Laurent Pinchart to CC. Regards, Stefan On Wed, 2021-05-26 at 07:34 +0000, Stefan Riedmüller wrote: > Hi, > > gentle ping for this small series. > > Regards, > Stefan > > On Thu, 2021-04-15 at 11:16 +0200, Stefan Riedmueller wrote: > > The AUO G104SN02 V2 is an LVDS display which supports 6 and 8 bpc PSWG. > > Add the corresponding connector type and 8 bpc as default bus_format. > > > > Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de> > > --- > > drivers/gpu/drm/panel/panel-simple.c | 2 ++ > > 1 file changed, 2 insertions(+) > > > > diff --git a/drivers/gpu/drm/panel/panel-simple.c > > b/drivers/gpu/drm/panel/panel-simple.c > > index 4e2dad314c79..44583d0ed902 100644 > > --- a/drivers/gpu/drm/panel/panel-simple.c > > +++ b/drivers/gpu/drm/panel/panel-simple.c > > @@ -1098,6 +1098,8 @@ static const struct panel_desc auo_g104sn02 = { > > .width = 211, > > .height = 158, > > }, > > + .bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG, > > + .connector_type = DRM_MODE_CONNECTOR_LVDS, > > }; > > > > static const struct drm_display_mode auo_g121ean01_mode = {
Hi Stefan, On Mon, Jun 21, 2021 at 08:22:10AM +0000, Stefan Riedmüller wrote: > Hi, > > another gentle ping. > > Also adding Laurent Pinchart to CC. Can I ask you to resend the whole lot. I have resurfaced after an off-line period and deleted all pending mails. I could probarly hunt down the mails somewhere but resend is easier on my end. Sam
Hi Stefan, Thank you for the patch. On Mon, Jun 21, 2021 at 08:22:10AM +0000, Stefan Riedmüller wrote: > Hi, > > another gentle ping. Sorry for the delay, I have way too little bandwidth these days :-S > Also adding Laurent Pinchart to CC. > > On Wed, 2021-05-26 at 07:34 +0000, Stefan Riedmüller wrote: > > On Thu, 2021-04-15 at 11:16 +0200, Stefan Riedmueller wrote: > > > The AUO G104SN02 V2 is an LVDS display which supports 6 and 8 bpc PSWG. > > > Add the corresponding connector type and 8 bpc as default bus_format. > > > > > > Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> It will be interesting to add support for the 6bpp mode at some point (I assume through a custom DT property that reports the state of the panel's SEL68 pin, as it should be strapped in most cases). > > > --- > > > drivers/gpu/drm/panel/panel-simple.c | 2 ++ > > > 1 file changed, 2 insertions(+) > > > > > > diff --git a/drivers/gpu/drm/panel/panel-simple.c > > > b/drivers/gpu/drm/panel/panel-simple.c > > > index 4e2dad314c79..44583d0ed902 100644 > > > --- a/drivers/gpu/drm/panel/panel-simple.c > > > +++ b/drivers/gpu/drm/panel/panel-simple.c > > > @@ -1098,6 +1098,8 @@ static const struct panel_desc auo_g104sn02 = { > > > .width = 211, > > > .height = 158, > > > }, > > > + .bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG, > > > + .connector_type = DRM_MODE_CONNECTOR_LVDS, > > > }; > > > > > > static const struct drm_display_mode auo_g121ean01_mode = {
Hi Sam, On Mon, 2021-06-21 at 16:17 +0200, Sam Ravnborg wrote: > Hi Stefan, > > On Mon, Jun 21, 2021 at 08:22:10AM +0000, Stefan Riedmüller wrote: > > Hi, > > > > another gentle ping. > > > > Also adding Laurent Pinchart to CC. > > Can I ask you to resend the whole lot. I have resurfaced after an > off-line period and deleted all pending mails. > > I could probarly hunt down the mails somewhere but resend is easier on > my end. Sure, no problem, I'll send it out ASAP. Stefan > > Sam
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c index 4e2dad314c79..44583d0ed902 100644 --- a/drivers/gpu/drm/panel/panel-simple.c +++ b/drivers/gpu/drm/panel/panel-simple.c @@ -1098,6 +1098,8 @@ static const struct panel_desc auo_g104sn02 = { .width = 211, .height = 158, }, + .bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG, + .connector_type = DRM_MODE_CONNECTOR_LVDS, }; static const struct drm_display_mode auo_g121ean01_mode = {
The AUO G104SN02 V2 is an LVDS display which supports 6 and 8 bpc PSWG. Add the corresponding connector type and 8 bpc as default bus_format. Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de> --- drivers/gpu/drm/panel/panel-simple.c | 2 ++ 1 file changed, 2 insertions(+)