| Message ID | 20210707120323.401785-2-benjamin.gaignard@collabora.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add support of HDMI for rk3568 | expand |
On Wed, 07 Jul 2021 14:03:22 +0200, Benjamin Gaignard wrote: > Define a new compatible for rk3568 HDMI. > This version of HDMI hardware block needs two new clocks hclk_vio and hclk > to provide phy reference clocks. > > Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com> > --- > version 2: > - Add the clocks needed for the phy. > > .../bindings/display/rockchip/rockchip,dw-hdmi.yaml | 6 +++++- > 1 file changed, 5 insertions(+), 1 deletion(-) > Reviewed-by: Rob Herring <robh@kernel.org>
Hello Benjamin, The HDMI TX block in the RK3568 requires two power supplies, which have to be enabled in some cases (at least on the RK3568 EVB1 the voltages VDDA0V9_IMAGE and VCCA1V8_IMAGE are disabled by default). It would be great if this was considered by the driver and the device tree binding. I am not sure, though, whether this is a RK3568 specific or rockchip_dw_hdmi specific thing. Maybe it can even enter the Synopsis DW HDMI driver. On 7/7/21 2:03 PM, Benjamin Gaignard wrote: > Define a new compatible for rk3568 HDMI. > This version of HDMI hardware block needs two new clocks hclk_vio and hclk > to provide phy reference clocks. > > Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com> > --- > version 2: > - Add the clocks needed for the phy. > > .../bindings/display/rockchip/rockchip,dw-hdmi.yaml | 6 +++++- > 1 file changed, 5 insertions(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml > index 75cd9c686e985..cb8643b3a8b84 100644 > --- a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml > +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml > @@ -23,6 +23,7 @@ properties: > - rockchip,rk3288-dw-hdmi > - rockchip,rk3328-dw-hdmi > - rockchip,rk3399-dw-hdmi > + - rockchip,rk3568-dw-hdmi > > reg-io-width: > const: 4 > @@ -51,8 +52,11 @@ properties: > - vpll > - enum: > - grf > + - hclk_vio > + - vpll > + - enum: > + - hclk > - vpll > - - const: vpll The description and documentation of the clocks are somewhat misleading IMHO. This is not caused by your patches, of course. But maybe this is a chance to clean them up a bit. It seems that the CEC clock is an optional clock of the dw-hdmi driver. Shouldn't it be documented in the synopsys,dw-hdmi.yaml? Also, it would be nice if the clocks hclk_vio and hclk featured a description in the binding. BTW, I am not too familiar with the syntax here, but shouldn't items in clocks and items in clock-names be aligned (currently, there is a plain list vs. an enum structure)? Best regards, Michael > > ddc-i2c-bus: > $ref: /schemas/types.yaml#/definitions/phandle >
Hi Michael, Am Dienstag, 13. Juli 2021, 10:44:00 CEST schrieb Michael Riesch: > The HDMI TX block in the RK3568 requires two power supplies, which have > to be enabled in some cases (at least on the RK3568 EVB1 the voltages > VDDA0V9_IMAGE and VCCA1V8_IMAGE are disabled by default). It would be > great if this was considered by the driver and the device tree binding. > I am not sure, though, whether this is a RK3568 specific or > rockchip_dw_hdmi specific thing. Maybe it can even enter the Synopsis DW > HDMI driver. I do remember that this discussion happened many years back already. And yes the supplies are needed for all but back then there was opposition as these are supposedly phy-related supplies, not for the dw-hdmi itself. [There are variants with an external phy, like on the rk3328] See discussion on [0] [0] https://dri-devel.freedesktop.narkive.com/pen2zWo1/patch-v3-1-2-drm-bridge-dw-hdmi-support-optional-supply-regulators > On 7/7/21 2:03 PM, Benjamin Gaignard wrote: > > Define a new compatible for rk3568 HDMI. > > This version of HDMI hardware block needs two new clocks hclk_vio and hclk > > to provide phy reference clocks. > > > > Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com> > > --- > > version 2: > > - Add the clocks needed for the phy. > > > > .../bindings/display/rockchip/rockchip,dw-hdmi.yaml | 6 +++++- > > 1 file changed, 5 insertions(+), 1 deletion(-) > > > > diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml > > index 75cd9c686e985..cb8643b3a8b84 100644 > > --- a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml > > +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml > > @@ -23,6 +23,7 @@ properties: > > - rockchip,rk3288-dw-hdmi > > - rockchip,rk3328-dw-hdmi > > - rockchip,rk3399-dw-hdmi > > + - rockchip,rk3568-dw-hdmi > > > > reg-io-width: > > const: 4 > > @@ -51,8 +52,11 @@ properties: > > - vpll > > - enum: > > - grf > > + - hclk_vio > > + - vpll > > + - enum: > > + - hclk > > - vpll > > - - const: vpll > > The description and documentation of the clocks are somewhat misleading > IMHO. This is not caused by your patches, of course. But maybe this is a > chance to clean them up a bit. > > It seems that the CEC clock is an optional clock of the dw-hdmi driver. > Shouldn't it be documented in the synopsys,dw-hdmi.yaml? > > Also, it would be nice if the clocks hclk_vio and hclk featured a > description in the binding. > > BTW, I am not too familiar with the syntax here, but shouldn't items in > clocks and items in clock-names be aligned (currently, there is a plain > list vs. an enum structure)? > > Best regards, > Michael > > > > > ddc-i2c-bus: > > $ref: /schemas/types.yaml#/definitions/phandle > > >
On 2021-07-07 13:03, Benjamin Gaignard wrote: > Define a new compatible for rk3568 HDMI. > This version of HDMI hardware block needs two new clocks hclk_vio and hclk > to provide phy reference clocks. Do you know what hclk_vio is and whether it's actually necessary? I don't see any mention of it downstream, and based on previous experience I'm suspicious that it might be just the parent of hclk, and thus should not need to be explicitly claimed by the device or baked into it's binding. Robin. > Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com> > --- > version 2: > - Add the clocks needed for the phy. > > .../bindings/display/rockchip/rockchip,dw-hdmi.yaml | 6 +++++- > 1 file changed, 5 insertions(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml > index 75cd9c686e985..cb8643b3a8b84 100644 > --- a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml > +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml > @@ -23,6 +23,7 @@ properties: > - rockchip,rk3288-dw-hdmi > - rockchip,rk3328-dw-hdmi > - rockchip,rk3399-dw-hdmi > + - rockchip,rk3568-dw-hdmi > > reg-io-width: > const: 4 > @@ -51,8 +52,11 @@ properties: > - vpll > - enum: > - grf > + - hclk_vio > + - vpll > + - enum: > + - hclk > - vpll > - - const: vpll > > ddc-i2c-bus: > $ref: /schemas/types.yaml#/definitions/phandle >
Hello Heiko, On 7/13/21 10:49 AM, Heiko Stübner wrote: > Hi Michael, > > Am Dienstag, 13. Juli 2021, 10:44:00 CEST schrieb Michael Riesch: >> The HDMI TX block in the RK3568 requires two power supplies, which have >> to be enabled in some cases (at least on the RK3568 EVB1 the voltages >> VDDA0V9_IMAGE and VCCA1V8_IMAGE are disabled by default). It would be >> great if this was considered by the driver and the device tree binding. >> I am not sure, though, whether this is a RK3568 specific or >> rockchip_dw_hdmi specific thing. Maybe it can even enter the Synopsis DW >> HDMI driver. > > I do remember that this discussion happened many years back already. > And yes the supplies are needed for all but back then there was opposition > as these are supposedly phy-related supplies, not for the dw-hdmi itself. > [There are variants with an external phy, like on the rk3328] > > See discussion on [0] > > [0] https://dri-devel.freedesktop.narkive.com/pen2zWo1/patch-v3-1-2-drm-bridge-dw-hdmi-support-optional-supply-regulators Thanks for the pointer. My summary of this discussion would be the following: - There was no consensus on how to handle the issue. The voltages still have to be enabled from the outside of the driver. - Open question: rockchip-specific or general solution? (one may detect a tendency towards a rockchip-specific solution) - Open question: separation of the phy from the dw_hdmi IP core? First of all, IMHO the driver should enable those voltages, otherwise we will have the same discussion again in 5-6 years :-) Then, the rockchip,dw-hdmi binding features a property "phys", presumably to handle external phys (e.g., for the RK3328). This fact and the referenced discussion suggest a rockchip-specific solution. In the Rockchip documentation (at least for RK3328, RK3399 and RK3568), there are two extra voltages denoted as "HDMI PHY analog power". It would be tempting to add the internal phy to the device tree and glue it to the dw-hdmi using the "phys" property. However, as pointed out in the referenced discussion, the configuration registers of the phy are somewhat interleaved with the dw-hdmi registers and a clear separation may be tricky. As a more pragmatic alternative, we could add optional supplies to the rockchip,dw-hdmi binding and evaluate the "phys" property. If the latter is not specified, the internal phy is used and the supplies must be enabled. Would such an approach be acceptable? Best regards, Michael >> On 7/7/21 2:03 PM, Benjamin Gaignard wrote: >>> Define a new compatible for rk3568 HDMI. >>> This version of HDMI hardware block needs two new clocks hclk_vio and hclk >>> to provide phy reference clocks. >>> >>> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com> >>> --- >>> version 2: >>> - Add the clocks needed for the phy. >>> >>> .../bindings/display/rockchip/rockchip,dw-hdmi.yaml | 6 +++++- >>> 1 file changed, 5 insertions(+), 1 deletion(-) >>> >>> diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml >>> index 75cd9c686e985..cb8643b3a8b84 100644 >>> --- a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml >>> +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml >>> @@ -23,6 +23,7 @@ properties: >>> - rockchip,rk3288-dw-hdmi >>> - rockchip,rk3328-dw-hdmi >>> - rockchip,rk3399-dw-hdmi >>> + - rockchip,rk3568-dw-hdmi >>> >>> reg-io-width: >>> const: 4 >>> @@ -51,8 +52,11 @@ properties: >>> - vpll >>> - enum: >>> - grf >>> + - hclk_vio >>> + - vpll >>> + - enum: >>> + - hclk >>> - vpll >>> - - const: vpll >> >> The description and documentation of the clocks are somewhat misleading >> IMHO. This is not caused by your patches, of course. But maybe this is a >> chance to clean them up a bit. >> >> It seems that the CEC clock is an optional clock of the dw-hdmi driver. >> Shouldn't it be documented in the synopsys,dw-hdmi.yaml? >> >> Also, it would be nice if the clocks hclk_vio and hclk featured a >> description in the binding. >> >> BTW, I am not too familiar with the syntax here, but shouldn't items in >> clocks and items in clock-names be aligned (currently, there is a plain >> list vs. an enum structure)? >> >> Best regards, >> Michael >> >>> >>> ddc-i2c-bus: >>> $ref: /schemas/types.yaml#/definitions/phandle >>> >> > > > >
On 2021-07-14 10:19, Michael Riesch wrote: > Hello Heiko, > > On 7/13/21 10:49 AM, Heiko Stübner wrote: >> Hi Michael, >> >> Am Dienstag, 13. Juli 2021, 10:44:00 CEST schrieb Michael Riesch: >>> The HDMI TX block in the RK3568 requires two power supplies, which have >>> to be enabled in some cases (at least on the RK3568 EVB1 the voltages >>> VDDA0V9_IMAGE and VCCA1V8_IMAGE are disabled by default). It would be >>> great if this was considered by the driver and the device tree binding. >>> I am not sure, though, whether this is a RK3568 specific or >>> rockchip_dw_hdmi specific thing. Maybe it can even enter the Synopsis DW >>> HDMI driver. >> >> I do remember that this discussion happened many years back already. >> And yes the supplies are needed for all but back then there was opposition >> as these are supposedly phy-related supplies, not for the dw-hdmi itself. >> [There are variants with an external phy, like on the rk3328] >> >> See discussion on [0] >> >> [0] https://dri-devel.freedesktop.narkive.com/pen2zWo1/patch-v3-1-2-drm-bridge-dw-hdmi-support-optional-supply-regulators > > Thanks for the pointer. My summary of this discussion would be the > following: > > - There was no consensus on how to handle the issue. The voltages still > have to be enabled from the outside of the driver. > - Open question: rockchip-specific or general solution? (one may detect > a tendency towards a rockchip-specific solution) > - Open question: separation of the phy from the dw_hdmi IP core? > > First of all, IMHO the driver should enable those voltages, otherwise we > will have the same discussion again in 5-6 years :-) > > Then, the rockchip,dw-hdmi binding features a property "phys", > presumably to handle external phys (e.g., for the RK3328). This fact and > the referenced discussion suggest a rockchip-specific solution. FWIW I've long thought that cleaning up the phy situation in dw-hdmi would be a good idea. It's always seemed a bit sketchy that on RK3328 we still validate modes against the tables for the Synopsys phy which isn't relevant, and if that does allow a clock rate through that the actual phy rejects then things just go horribly wrong and the display breaks. > In the Rockchip documentation (at least for RK3328, RK3399 and RK3568), > there are two extra voltages denoted as "HDMI PHY analog power". It > would be tempting to add the internal phy to the device tree and glue it > to the dw-hdmi using the "phys" property. However, as pointed out in the > referenced discussion, the configuration registers of the phy are > somewhat interleaved with the dw-hdmi registers and a clear separation > may be tricky. Conceptually I don't think there's any issue with the HDMI node being its own phy provider where appropriate. At the DT level it should simply be a case of having both sets of properties, e.g.: &hdmi { #phy-cells = <0>; phys = <&hdmi>; }; And at the driver level AFAICS it's pretty much just a case of dw-hdmi additionally registering itself as a phy provider if the internal phy is present - the only difference then should be that it can end up calling back into itself via the common phy API rather than directly via internal special-cases. Robin. > As a more pragmatic alternative, we could add optional supplies to the > rockchip,dw-hdmi binding and evaluate the "phys" property. If the latter > is not specified, the internal phy is used and the supplies must be > enabled. Would such an approach be acceptable? > > Best regards, > Michael > >>> On 7/7/21 2:03 PM, Benjamin Gaignard wrote: >>>> Define a new compatible for rk3568 HDMI. >>>> This version of HDMI hardware block needs two new clocks hclk_vio and hclk >>>> to provide phy reference clocks. >>>> >>>> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com> >>>> --- >>>> version 2: >>>> - Add the clocks needed for the phy. >>>> >>>> .../bindings/display/rockchip/rockchip,dw-hdmi.yaml | 6 +++++- >>>> 1 file changed, 5 insertions(+), 1 deletion(-) >>>> >>>> diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml >>>> index 75cd9c686e985..cb8643b3a8b84 100644 >>>> --- a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml >>>> +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml >>>> @@ -23,6 +23,7 @@ properties: >>>> - rockchip,rk3288-dw-hdmi >>>> - rockchip,rk3328-dw-hdmi >>>> - rockchip,rk3399-dw-hdmi >>>> + - rockchip,rk3568-dw-hdmi >>>> >>>> reg-io-width: >>>> const: 4 >>>> @@ -51,8 +52,11 @@ properties: >>>> - vpll >>>> - enum: >>>> - grf >>>> + - hclk_vio >>>> + - vpll >>>> + - enum: >>>> + - hclk >>>> - vpll >>>> - - const: vpll >>> >>> The description and documentation of the clocks are somewhat misleading >>> IMHO. This is not caused by your patches, of course. But maybe this is a >>> chance to clean them up a bit. >>> >>> It seems that the CEC clock is an optional clock of the dw-hdmi driver. >>> Shouldn't it be documented in the synopsys,dw-hdmi.yaml? >>> >>> Also, it would be nice if the clocks hclk_vio and hclk featured a >>> description in the binding. >>> >>> BTW, I am not too familiar with the syntax here, but shouldn't items in >>> clocks and items in clock-names be aligned (currently, there is a plain >>> list vs. an enum structure)? >>> >>> Best regards, >>> Michael >>> >>>> >>>> ddc-i2c-bus: >>>> $ref: /schemas/types.yaml#/definitions/phandle >>>> >>> >> >> >> >> > > _______________________________________________ > Linux-rockchip mailing list > Linux-rockchip@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-rockchip >
diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml index 75cd9c686e985..cb8643b3a8b84 100644 --- a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml @@ -23,6 +23,7 @@ properties: - rockchip,rk3288-dw-hdmi - rockchip,rk3328-dw-hdmi - rockchip,rk3399-dw-hdmi + - rockchip,rk3568-dw-hdmi reg-io-width: const: 4 @@ -51,8 +52,11 @@ properties: - vpll - enum: - grf + - hclk_vio + - vpll + - enum: + - hclk - vpll - - const: vpll ddc-i2c-bus: $ref: /schemas/types.yaml#/definitions/phandle
Define a new compatible for rk3568 HDMI. This version of HDMI hardware block needs two new clocks hclk_vio and hclk to provide phy reference clocks. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com> --- version 2: - Add the clocks needed for the phy. .../bindings/display/rockchip/rockchip,dw-hdmi.yaml | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)