| Message ID | 20220511161539.v2.1.Ia196e35ad985059e77b038a41662faae9e26f411@changeid (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v2] Revert "drm/msm/dsi: move DSI host powerup to modeset time" | expand |
On 12/05/2022 02:15, Douglas Anderson wrote: > This reverts commit 7d8e9a90509f1bd1d193a0c93cb8d1dbad9049fb. > > The patch causes sc7180 Chromebooks that use the parade-ps8640 bridge > chip to fail to turn the display back on after it turns off. > > Let's revert to get these devices back to a working state. It seems > like the DSI powerup problem is somewhat common and probably we should > land something more general like Dave Stevenson's series [1] that > would give more flexibility. > > [1] https://lore.kernel.org/r/cover.1646406653.git.dave.stevenson@raspberrypi.com > > Fixes: 7d8e9a90509f ("drm/msm/dsi: move DSI host powerup to modeset time") > Signed-off-by: Douglas Anderson <dianders@chromium.org> > --- > > Changes in v2: > - Remove the mud from my face. As stated, I'm for this revert, but after getting the mentioned patchset in. Will that work for you? If not, I'd prefer to land a patch adding modparam to powerup the DSI during the mode_set or during the pre_enabel(). > > drivers/gpu/drm/msm/dsi/dsi_manager.c | 43 ++++++++------------------- > 1 file changed, 12 insertions(+), 31 deletions(-) > > diff --git a/drivers/gpu/drm/msm/dsi/dsi_manager.c b/drivers/gpu/drm/msm/dsi/dsi_manager.c > index 50b987658b1f..8d51711a3417 100644 > --- a/drivers/gpu/drm/msm/dsi/dsi_manager.c > +++ b/drivers/gpu/drm/msm/dsi/dsi_manager.c > @@ -315,12 +315,13 @@ dsi_mgr_connector_best_encoder(struct drm_connector *connector) > return msm_dsi_get_encoder(msm_dsi); > } > > -static void dsi_mgr_bridge_power_on(struct drm_bridge *bridge) > +static void dsi_mgr_bridge_pre_enable(struct drm_bridge *bridge) > { > int id = dsi_mgr_bridge_get_id(bridge); > struct msm_dsi *msm_dsi = dsi_mgr_get_dsi(id); > struct msm_dsi *msm_dsi1 = dsi_mgr_get_dsi(DSI_1); > struct mipi_dsi_host *host = msm_dsi->host; > + struct drm_panel *panel = msm_dsi->panel; > struct msm_dsi_phy_shared_timings phy_shared_timings[DSI_MAX]; > bool is_bonded_dsi = IS_BONDED_DSI(); > int ret; > @@ -361,34 +362,6 @@ static void dsi_mgr_bridge_power_on(struct drm_bridge *bridge) > if (is_bonded_dsi && msm_dsi1) > msm_dsi_host_enable_irq(msm_dsi1->host); > > - return; > - > -host1_on_fail: > - msm_dsi_host_power_off(host); > -host_on_fail: > - dsi_mgr_phy_disable(id); > -phy_en_fail: > - return; > -} > - > -static void dsi_mgr_bridge_pre_enable(struct drm_bridge *bridge) > -{ > - int id = dsi_mgr_bridge_get_id(bridge); > - struct msm_dsi *msm_dsi = dsi_mgr_get_dsi(id); > - struct msm_dsi *msm_dsi1 = dsi_mgr_get_dsi(DSI_1); > - struct mipi_dsi_host *host = msm_dsi->host; > - struct drm_panel *panel = msm_dsi->panel; > - bool is_bonded_dsi = IS_BONDED_DSI(); > - int ret; > - > - DBG("id=%d", id); > - if (!msm_dsi_device_connected(msm_dsi)) > - return; > - > - /* Do nothing with the host if it is slave-DSI in case of bonded DSI */ > - if (is_bonded_dsi && !IS_MASTER_DSI_LINK(id)) > - return; > - > /* Always call panel functions once, because even for dual panels, > * there is only one drm_panel instance. > */ > @@ -423,7 +396,17 @@ static void dsi_mgr_bridge_pre_enable(struct drm_bridge *bridge) > if (panel) > drm_panel_unprepare(panel); > panel_prep_fail: > + msm_dsi_host_disable_irq(host); > + if (is_bonded_dsi && msm_dsi1) > + msm_dsi_host_disable_irq(msm_dsi1->host); > > + if (is_bonded_dsi && msm_dsi1) > + msm_dsi_host_power_off(msm_dsi1->host); > +host1_on_fail: > + msm_dsi_host_power_off(host); > +host_on_fail: > + dsi_mgr_phy_disable(id); > +phy_en_fail: > return; > } > > @@ -569,8 +552,6 @@ static void dsi_mgr_bridge_mode_set(struct drm_bridge *bridge, > msm_dsi_host_set_display_mode(host, adjusted_mode); > if (is_bonded_dsi && other_dsi) > msm_dsi_host_set_display_mode(other_dsi->host, adjusted_mode); > - > - dsi_mgr_bridge_power_on(bridge); > } > > static enum drm_mode_status dsi_mgr_bridge_mode_valid(struct drm_bridge *bridge,
diff --git a/drivers/gpu/drm/msm/dsi/dsi_manager.c b/drivers/gpu/drm/msm/dsi/dsi_manager.c index 50b987658b1f..8d51711a3417 100644 --- a/drivers/gpu/drm/msm/dsi/dsi_manager.c +++ b/drivers/gpu/drm/msm/dsi/dsi_manager.c @@ -315,12 +315,13 @@ dsi_mgr_connector_best_encoder(struct drm_connector *connector) return msm_dsi_get_encoder(msm_dsi); } -static void dsi_mgr_bridge_power_on(struct drm_bridge *bridge) +static void dsi_mgr_bridge_pre_enable(struct drm_bridge *bridge) { int id = dsi_mgr_bridge_get_id(bridge); struct msm_dsi *msm_dsi = dsi_mgr_get_dsi(id); struct msm_dsi *msm_dsi1 = dsi_mgr_get_dsi(DSI_1); struct mipi_dsi_host *host = msm_dsi->host; + struct drm_panel *panel = msm_dsi->panel; struct msm_dsi_phy_shared_timings phy_shared_timings[DSI_MAX]; bool is_bonded_dsi = IS_BONDED_DSI(); int ret; @@ -361,34 +362,6 @@ static void dsi_mgr_bridge_power_on(struct drm_bridge *bridge) if (is_bonded_dsi && msm_dsi1) msm_dsi_host_enable_irq(msm_dsi1->host); - return; - -host1_on_fail: - msm_dsi_host_power_off(host); -host_on_fail: - dsi_mgr_phy_disable(id); -phy_en_fail: - return; -} - -static void dsi_mgr_bridge_pre_enable(struct drm_bridge *bridge) -{ - int id = dsi_mgr_bridge_get_id(bridge); - struct msm_dsi *msm_dsi = dsi_mgr_get_dsi(id); - struct msm_dsi *msm_dsi1 = dsi_mgr_get_dsi(DSI_1); - struct mipi_dsi_host *host = msm_dsi->host; - struct drm_panel *panel = msm_dsi->panel; - bool is_bonded_dsi = IS_BONDED_DSI(); - int ret; - - DBG("id=%d", id); - if (!msm_dsi_device_connected(msm_dsi)) - return; - - /* Do nothing with the host if it is slave-DSI in case of bonded DSI */ - if (is_bonded_dsi && !IS_MASTER_DSI_LINK(id)) - return; - /* Always call panel functions once, because even for dual panels, * there is only one drm_panel instance. */ @@ -423,7 +396,17 @@ static void dsi_mgr_bridge_pre_enable(struct drm_bridge *bridge) if (panel) drm_panel_unprepare(panel); panel_prep_fail: + msm_dsi_host_disable_irq(host); + if (is_bonded_dsi && msm_dsi1) + msm_dsi_host_disable_irq(msm_dsi1->host); + if (is_bonded_dsi && msm_dsi1) + msm_dsi_host_power_off(msm_dsi1->host); +host1_on_fail: + msm_dsi_host_power_off(host); +host_on_fail: + dsi_mgr_phy_disable(id); +phy_en_fail: return; } @@ -569,8 +552,6 @@ static void dsi_mgr_bridge_mode_set(struct drm_bridge *bridge, msm_dsi_host_set_display_mode(host, adjusted_mode); if (is_bonded_dsi && other_dsi) msm_dsi_host_set_display_mode(other_dsi->host, adjusted_mode); - - dsi_mgr_bridge_power_on(bridge); } static enum drm_mode_status dsi_mgr_bridge_mode_valid(struct drm_bridge *bridge,
This reverts commit 7d8e9a90509f1bd1d193a0c93cb8d1dbad9049fb. The patch causes sc7180 Chromebooks that use the parade-ps8640 bridge chip to fail to turn the display back on after it turns off. Let's revert to get these devices back to a working state. It seems like the DSI powerup problem is somewhat common and probably we should land something more general like Dave Stevenson's series [1] that would give more flexibility. [1] https://lore.kernel.org/r/cover.1646406653.git.dave.stevenson@raspberrypi.com Fixes: 7d8e9a90509f ("drm/msm/dsi: move DSI host powerup to modeset time") Signed-off-by: Douglas Anderson <dianders@chromium.org> --- Changes in v2: - Remove the mud from my face. drivers/gpu/drm/msm/dsi/dsi_manager.c | 43 ++++++++------------------- 1 file changed, 12 insertions(+), 31 deletions(-)