| Message ID | 20220718213051.1475108-4-caleb@connolly.tech (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Initial support for the Pixel 3 | expand |
Hi Caleb, On Mon, Jul 18, 2022 at 10:30:50PM +0100, Caleb Connolly wrote: > From: Sumit Semwal <sumit.semwal@linaro.org> > > LG SW43408 is 1080x2160, 4-lane MIPI-DSI panel. A few things to improve to this binding. Sam > > Signed-off-by: Vinod Koul <vkoul@kernel.org> > Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> > [caleb: convert to yaml] > Signed-off-by: Caleb Connolly <caleb@connolly.tech> > --- > .../bindings/display/panel/lg,43408.yaml | 41 +++++++++++++++++++ > .../display/panel/panel-simple-dsi.yaml | 2 + > 2 files changed, 43 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/panel/lg,43408.yaml > > diff --git a/Documentation/devicetree/bindings/display/panel/lg,43408.yaml b/Documentation/devicetree/bindings/display/panel/lg,43408.yaml > new file mode 100644 > index 000000000000..0529a3aa2692 > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/panel/lg,43408.yaml > @@ -0,0 +1,41 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/display/panel/panel-lvds.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: LG SW43408 1080x2160 DSI panel > + > +maintainers: > + - Caleb Connolly <caleb@connolly.tech> > + > +description: | > + This panel is used on the Pixel 3, it is a 60hz OLED panel which > + required DSC (Display Stream Compression) and has rounded corners. > + > +allOf: > + - $ref: panel-common.yaml# > + > +properties: > + compatible: > + items: > + - const: lg,sw43408 > + > + vddi-supply: true > + vpnl-supply: true > + reset-gpios: true > + > + backlight: false > + power-supply: false No need to say anything is false, this is covered by the statement below. Also, the driver uses backlight, so it should be true? > + > +additionalProperties: false > + > +required: > + - compatible > + - data-mapping > + - width-mm > + - height-mm > + - panel-timing > + - port > + > +... > diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml > index 2c00813f5d20..4498078cb1ee 100644 > --- a/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml > +++ b/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml > @@ -45,6 +45,8 @@ properties: > - lg,acx467akm-7 > # LG Corporation 7" WXGA TFT LCD panel > - lg,ld070wx3-sl01 > + # LG Corporation sw43408 1080x2160 OLED > + - lg,sw43408 The panel uses three power-supplies, so it is not a "panel-simple" binding. And we cannot have the same compatible twice, so this must be dropped. Sam
Hi Caleb, On Tue, Jul 19, 2022 at 08:10:18AM +0200, Sam Ravnborg wrote: > Hi Caleb, > > On Mon, Jul 18, 2022 at 10:30:50PM +0100, Caleb Connolly wrote: > > From: Sumit Semwal <sumit.semwal@linaro.org> > > > > LG SW43408 is 1080x2160, 4-lane MIPI-DSI panel. > A few things to improve to this binding. > > Sam > > > > Signed-off-by: Vinod Koul <vkoul@kernel.org> > > Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> > > [caleb: convert to yaml] > > Signed-off-by: Caleb Connolly <caleb@connolly.tech> > > --- > > .../bindings/display/panel/lg,43408.yaml | 41 +++++++++++++++++++ > > .../display/panel/panel-simple-dsi.yaml | 2 + > > 2 files changed, 43 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/display/panel/lg,43408.yaml > > > > diff --git a/Documentation/devicetree/bindings/display/panel/lg,43408.yaml b/Documentation/devicetree/bindings/display/panel/lg,43408.yaml > > new file mode 100644 > > index 000000000000..0529a3aa2692 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/display/panel/lg,43408.yaml > > @@ -0,0 +1,41 @@ > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/display/panel/panel-lvds.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: LG SW43408 1080x2160 DSI panel > > + > > +maintainers: > > + - Caleb Connolly <caleb@connolly.tech> > > + > > +description: | > > + This panel is used on the Pixel 3, it is a 60hz OLED panel which > > + required DSC (Display Stream Compression) and has rounded corners. > > + > > +allOf: > > + - $ref: panel-common.yaml# > > + > > +properties: > > + compatible: > > + items: > > + - const: lg,sw43408 > > + > > + vddi-supply: true > > + vpnl-supply: true > > + reset-gpios: true > > + > > + backlight: false > > + power-supply: false > No need to say anything is false, this is covered by the statement below. > Also, the driver uses backlight, so it should be true? The driver do not use backlight from the DT so disregard the last comment. Sam
On Mon, 18 Jul 2022 22:30:50 +0100, Caleb Connolly wrote: > From: Sumit Semwal <sumit.semwal@linaro.org> > > LG SW43408 is 1080x2160, 4-lane MIPI-DSI panel. > > Signed-off-by: Vinod Koul <vkoul@kernel.org> > Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> > [caleb: convert to yaml] > Signed-off-by: Caleb Connolly <caleb@connolly.tech> > --- > .../bindings/display/panel/lg,43408.yaml | 41 +++++++++++++++++++ > .../display/panel/panel-simple-dsi.yaml | 2 + > 2 files changed, 43 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/panel/lg,43408.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: ./Documentation/devicetree/bindings/display/panel/lg,43408.yaml: $id: relative path/filename doesn't match actual path or filename expected: http://devicetree.org/schemas/display/panel/lg,43408.yaml# /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/display/panel/lg,43408.yaml: duplicate '$id' value 'http://devicetree.org/schemas/display/panel/panel-lvds.yaml#' doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/patch/ This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
diff --git a/Documentation/devicetree/bindings/display/panel/lg,43408.yaml b/Documentation/devicetree/bindings/display/panel/lg,43408.yaml new file mode 100644 index 000000000000..0529a3aa2692 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/lg,43408.yaml @@ -0,0 +1,41 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/panel-lvds.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: LG SW43408 1080x2160 DSI panel + +maintainers: + - Caleb Connolly <caleb@connolly.tech> + +description: | + This panel is used on the Pixel 3, it is a 60hz OLED panel which + required DSC (Display Stream Compression) and has rounded corners. + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + items: + - const: lg,sw43408 + + vddi-supply: true + vpnl-supply: true + reset-gpios: true + + backlight: false + power-supply: false + +additionalProperties: false + +required: + - compatible + - data-mapping + - width-mm + - height-mm + - panel-timing + - port + +... diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml index 2c00813f5d20..4498078cb1ee 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml @@ -45,6 +45,8 @@ properties: - lg,acx467akm-7 # LG Corporation 7" WXGA TFT LCD panel - lg,ld070wx3-sl01 + # LG Corporation sw43408 1080x2160 OLED + - lg,sw43408 # One Stop Displays OSD101T2587-53TS 10.1" 1920x1200 panel - osddisplays,osd101t2587-53ts # Panasonic 10" WUXGA TFT LCD panel