@@ -52,16 +52,22 @@ static void lcdif_set_formats(struct lcdif_drm_private *lcdif,
writel(DISP_PARA_LINE_PATTERN_UYVY_H,
lcdif->base + LCDC_V8_DISP_PARA);
- /* CSC: BT.601 Full Range RGB to YCbCr coefficients. */
- writel(CSC0_COEF0_A2(0x096) | CSC0_COEF0_A1(0x04c),
+ /*
+ * CSC: BT.601 Limited Range RGB to YCbCr coefficients.
+ *
+ * |Y | | 0.2568 0.5041 0.0979| |R| |16 |
+ * |Cb| = |-0.1482 -0.2910 0.4392| * |G| + |128|
+ * |Cr| | 0.4392 0.4392 -0.3678| |B| |128|
+ */
+ writel(CSC0_COEF0_A2(0x081) | CSC0_COEF0_A1(0x041),
lcdif->base + LCDC_V8_CSC0_COEF0);
- writel(CSC0_COEF1_B1(0x7d5) | CSC0_COEF1_A3(0x01d),
+ writel(CSC0_COEF1_B1(0x7db) | CSC0_COEF1_A3(0x019),
lcdif->base + LCDC_V8_CSC0_COEF1);
- writel(CSC0_COEF2_B3(0x080) | CSC0_COEF2_B2(0x7ac),
+ writel(CSC0_COEF2_B3(0x070) | CSC0_COEF2_B2(0x7b6),
lcdif->base + LCDC_V8_CSC0_COEF2);
- writel(CSC0_COEF3_C2(0x795) | CSC0_COEF3_C1(0x080),
+ writel(CSC0_COEF3_C2(0x7a2) | CSC0_COEF3_C1(0x070),
lcdif->base + LCDC_V8_CSC0_COEF3);
- writel(CSC0_COEF4_D1(0x000) | CSC0_COEF4_C3(0x7ec),
+ writel(CSC0_COEF4_D1(0x010) | CSC0_COEF4_C3(0x7ee),
lcdif->base + LCDC_V8_CSC0_COEF4);
writel(CSC0_COEF5_D3(0x080) | CSC0_COEF5_D2(0x080),
lcdif->base + LCDC_V8_CSC0_COEF5);
Up to and including v1.3, HDMI supported limited quantization range only for YCbCr. HDMI v1.4 introduced selectable quantization ranges, but this feature isn't supported in the dw-hdmi driver that is used in conjunction with the LCDIF in the i.MX8MP. The HDMI YCbCr output is thus always advertised in the AVI infoframe as limited range. The LCDIF driver, on the other hand, configures the CSC to produce full range YCbCr. This mismatch results in loss of details and incorrect colours. Fix it by switching to limited range YCbCr. The coefficients are copied from drivers/media/platforms/nxp/imx-pxp.c for coherency, as the hardware is most likely identical. Fixes: 9db35bb349a0 ("drm: lcdif: Add support for i.MX8MP LCDIF variant") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Liu Ying <victor.liu@nxp.com> --- Changes since v2: - List floating point coefficient values in comment - Fix typo in the commit message Changes since v1: - Use coefficients from imx-pxp.c --- drivers/gpu/drm/mxsfb/lcdif_kms.c | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-)