| Message ID | 20221119173019.15643-3-a-bhatia1@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add DSS support for AM625 SoC | expand |
Hi, On 19/11/2022 19:30, Aradhya Bhatia wrote: > Add support for the DSS controller on TI's new AM625 SoC in the tidss > driver. > > The first video port (VP0) in am625-dss can output OLDI signals through > 2 OLDI TXes. A 3rd output port has been added with "DISPC_VP_OLDI" bus > type. > > DSS controllers before AM625 had a 1 to 1 coupling between Videoports > and Output Ports. Since this stands no longer to be true for AM625 DSS, > this couppling has been separated with the introduction of output port > based variables. This will help address the addition of the 2nd OLDI TX > over VP0 as the 3rd output port. This patch does three things: - Renames "port" to "vp" where applicable - Adds output ports - Adds AM625 I think at least the AM625 parts should be a separate patch, but preferably all three would be separate patches. > Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com> > --- > drivers/gpu/drm/tidss/tidss_dispc.c | 80 ++++++++++++++++++++++++++--- > drivers/gpu/drm/tidss/tidss_dispc.h | 15 ++++-- > drivers/gpu/drm/tidss/tidss_drv.c | 1 + > drivers/gpu/drm/tidss/tidss_drv.h | 5 +- > drivers/gpu/drm/tidss/tidss_irq.h | 2 +- > drivers/gpu/drm/tidss/tidss_kms.c | 2 +- > 6 files changed, 90 insertions(+), 15 deletions(-) > > diff --git a/drivers/gpu/drm/tidss/tidss_dispc.c b/drivers/gpu/drm/tidss/tidss_dispc.c > index ad93acc9abd2..dbc6a5b617ca 100644 > --- a/drivers/gpu/drm/tidss/tidss_dispc.c > +++ b/drivers/gpu/drm/tidss/tidss_dispc.c > @@ -93,10 +93,13 @@ const struct dispc_features dispc_k2g_feats = { > .common_regs = tidss_k2g_common_regs, > > .num_vps = 1, > + .num_output_ports = 1, > + .oldi_supported = false, I'd prefer "has_oldi", the style is used in other places too. > .vp_name = { "vp1" }, > .ovr_name = { "ovr1" }, > .vpclk_name = { "vp1" }, > .vp_bus_type = { DISPC_VP_DPI }, > + .output_port_bus_type = { DISPC_VP_DPI }, It would make sense to re-arrange these a bit, so that lines related to VPs are together, and lines related to output ports would be together. > .vp_feat = { .color = { > .has_ctm = true, > @@ -168,10 +171,13 @@ const struct dispc_features dispc_am65x_feats = { > .common_regs = tidss_am65x_common_regs, > > .num_vps = 2, > + .num_output_ports = 2, > + .oldi_supported = true, > .vp_name = { "vp1", "vp2" }, > .ovr_name = { "ovr1", "ovr2" }, > .vpclk_name = { "vp1", "vp2" }, > .vp_bus_type = { DISPC_VP_OLDI, DISPC_VP_DPI }, > + .output_port_bus_type = { DISPC_VP_OLDI, DISPC_VP_DPI }, > > .vp_feat = { .color = { > .has_ctm = true, > @@ -257,12 +263,16 @@ const struct dispc_features dispc_j721e_feats = { > .common_regs = tidss_j721e_common_regs, > > .num_vps = 4, > + .num_output_ports = 4, > + .oldi_supported = false, > .vp_name = { "vp1", "vp2", "vp3", "vp4" }, > .ovr_name = { "ovr1", "ovr2", "ovr3", "ovr4" }, > .vpclk_name = { "vp1", "vp2", "vp3", "vp4" }, > /* Currently hard coded VP routing (see dispc_initial_config()) */ > .vp_bus_type = { DISPC_VP_INTERNAL, DISPC_VP_DPI, > DISPC_VP_INTERNAL, DISPC_VP_DPI, }, > + .output_port_bus_type = { DISPC_VP_INTERNAL, DISPC_VP_DPI, > + DISPC_VP_INTERNAL, DISPC_VP_DPI, }, > .vp_feat = { .color = { > .has_ctm = true, > .gamma_size = 1024, > @@ -275,6 +285,59 @@ const struct dispc_features dispc_j721e_feats = { > .vid_order = { 1, 3, 0, 2 }, > }; > > +const struct dispc_features dispc_am625_feats = { > + .max_pclk_khz = { > + [DISPC_VP_DPI] = 165000, > + [DISPC_VP_OLDI] = 165000, > + }, > + > + .scaling = { > + .in_width_max_5tap_rgb = 1280, > + .in_width_max_3tap_rgb = 2560, > + .in_width_max_5tap_yuv = 2560, > + .in_width_max_3tap_yuv = 4096, > + .upscale_limit = 16, > + .downscale_limit_5tap = 4, > + .downscale_limit_3tap = 2, > + /* > + * The max supported pixel inc value is 255. The value > + * of pixel inc is calculated like this: 1+(xinc-1)*bpp. > + * The maximum bpp of all formats supported by the HW > + * is 8. So the maximum supported xinc value is 32, > + * because 1+(32-1)*8 < 255 < 1+(33-1)*4. > + */ > + .xinc_max = 32, > + }, > + > + .subrev = DISPC_AM625, > + > + .common = "common", > + .common_regs = tidss_am65x_common_regs, > + > + .num_vps = 2, > + /* note: the 3rd port is not representative of a 3rd pipeline */ > + .num_output_ports = 3, > + .oldi_supported = true, > + .vp_name = { "vp1", "vp2" }, > + .ovr_name = { "ovr1", "ovr2" }, > + .vpclk_name = { "vp1", "vp2" }, > + .vp_bus_type = { DISPC_VP_OLDI, DISPC_VP_DPI }, > + .output_port_bus_type = { DISPC_VP_OLDI, DISPC_VP_DPI, DISPC_VP_OLDI }, This is a bit confusing: DISPC_VP_* defines are used for both vp_bus_type (which makes sense), but it's also used for output_port_bus_type. The code uses both vp_bus_type and output_port_bus_type, but my initial reaction was that we should only have one of these. Perhaps the output_port_bus_type, as the VPs should be identical. The differences are after the VP. However, I'm not sure if that's an easy change. But maybe instead of output_port_bus_type we could have output_port_source, which lists, for each output port, the VP it uses as a source. Here it would be { 0, 1, 0 }. With that, the code can get the output's VP bus_type. > + .vp_feat = { .color = { > + .has_ctm = true, > + .gamma_size = 256, > + .gamma_type = TIDSS_GAMMA_8BIT, > + }, > + }, > + > + .num_planes = 2, > + /* note: vid is plane_id 0 and vidl1 is plane_id 1 */ > + .vid_name = { "vid", "vidl1" }, > + .vid_lite = { false, true, }, > + .vid_order = { 1, 0 }, > +}; > + > static const u16 *dispc_common_regmap; > > struct dss_vp_data { > @@ -287,12 +350,12 @@ struct dispc_device { > > void __iomem *base_common; > void __iomem *base_vid[TIDSS_MAX_PLANES]; > - void __iomem *base_ovr[TIDSS_MAX_PORTS]; > - void __iomem *base_vp[TIDSS_MAX_PORTS]; > + void __iomem *base_ovr[TIDSS_MAX_VPS]; > + void __iomem *base_vp[TIDSS_MAX_VPS]; > > struct regmap *oldi_io_ctrl; > > - struct clk *vp_clk[TIDSS_MAX_PORTS]; > + struct clk *vp_clk[TIDSS_MAX_VPS]; > > const struct dispc_features *feat; > > @@ -300,7 +363,7 @@ struct dispc_device { > > bool is_enabled; > > - struct dss_vp_data vp_data[TIDSS_MAX_PORTS]; > + struct dss_vp_data vp_data[TIDSS_MAX_VPS]; > > u32 *fourccs; > u32 num_fourccs; > @@ -778,6 +841,7 @@ dispc_irq_t dispc_read_and_clear_irqstatus(struct dispc_device *dispc) > return dispc_k2g_read_and_clear_irqstatus(dispc); > case DISPC_AM65X: > case DISPC_J721E: > + case DISPC_AM625: In switch cases like these, I think it makes sense to group the cases. Here the AM6 cases should be together, and I'd put the AM625 on top so that the cases are sorted. > return dispc_k3_read_and_clear_irqstatus(dispc); > default: > WARN_ON(1); > @@ -793,6 +857,7 @@ void dispc_set_irqenable(struct dispc_device *dispc, dispc_irq_t mask) > break; > case DISPC_AM65X: > case DISPC_J721E: > + case DISPC_AM625: > dispc_k3_set_irqenable(dispc, mask); > break; > default: > @@ -1116,7 +1181,7 @@ enum drm_mode_status dispc_vp_mode_valid(struct dispc_device *dispc, > const struct drm_display_mode *mode) > { > u32 hsw, hfp, hbp, vsw, vfp, vbp; > - enum dispc_vp_bus_type bus_type; > + enum dispc_bus_type bus_type; > int max_pclk; > > bus_type = dispc->feat->vp_bus_type[hw_videoport]; > @@ -1282,6 +1347,7 @@ void dispc_ovr_set_plane(struct dispc_device *dispc, u32 hw_plane, > x, y, layer); > break; > case DISPC_AM65X: > + case DISPC_AM625: > dispc_am65x_ovr_set_plane(dispc, hw_plane, hw_videoport, > x, y, layer); > break; > @@ -2205,6 +2271,7 @@ static void dispc_plane_init(struct dispc_device *dispc) > break; > case DISPC_AM65X: > case DISPC_J721E: > + case DISPC_AM625: > dispc_k3_plane_init(dispc); > break; > default: > @@ -2310,6 +2377,7 @@ static void dispc_vp_write_gamma_table(struct dispc_device *dispc, > dispc_k2g_vp_write_gamma_table(dispc, hw_videoport); > break; > case DISPC_AM65X: > + case DISPC_AM625: > dispc_am65x_vp_write_gamma_table(dispc, hw_videoport); > break; > case DISPC_J721E: > @@ -2583,7 +2651,7 @@ int dispc_runtime_resume(struct dispc_device *dispc) > REG_GET(dispc, DSS_SYSSTATUS, 2, 2), > REG_GET(dispc, DSS_SYSSTATUS, 3, 3)); > > - if (dispc->feat->subrev == DISPC_AM65X) > + if (dispc->feat->oldi_supported) > dev_dbg(dispc->dev, "OLDI RESETDONE %d,%d,%d\n", > REG_GET(dispc, DSS_SYSSTATUS, 5, 5), > REG_GET(dispc, DSS_SYSSTATUS, 6, 6), > diff --git a/drivers/gpu/drm/tidss/tidss_dispc.h b/drivers/gpu/drm/tidss/tidss_dispc.h > index e49432f0abf5..51db500590ee 100644 > --- a/drivers/gpu/drm/tidss/tidss_dispc.h > +++ b/drivers/gpu/drm/tidss/tidss_dispc.h > @@ -50,7 +50,7 @@ struct dispc_errata { > bool i2000; /* DSS Does Not Support YUV Pixel Data Formats */ > }; > > -enum dispc_vp_bus_type { > +enum dispc_bus_type { > DISPC_VP_DPI, /* DPI output */ > DISPC_VP_OLDI, /* OLDI (LVDS) output */ > DISPC_VP_INTERNAL, /* SoC internal routing */ If you rename the enum to dispc_bus_type, the enum value name doesn't match anymore as it still contains VP. If you go with the suggestion of not having output_port_bus_type at all, then you can keep this as dispc_vp_bus_type. But if we need types for both VPs and outputs, I think it would be better to have separate enums for them. > @@ -61,6 +61,7 @@ enum dispc_dss_subrevision { > DISPC_K2G, > DISPC_AM65X, > DISPC_J721E, > + DISPC_AM625, > }; > > struct dispc_features { > @@ -74,10 +75,13 @@ struct dispc_features { > const char *common; > const u16 *common_regs; > u32 num_vps; > - const char *vp_name[TIDSS_MAX_PORTS]; /* Should match dt reg names */ > - const char *ovr_name[TIDSS_MAX_PORTS]; /* Should match dt reg names */ > - const char *vpclk_name[TIDSS_MAX_PORTS]; /* Should match dt clk names */ > - const enum dispc_vp_bus_type vp_bus_type[TIDSS_MAX_PORTS]; > + u32 num_output_ports; > + bool oldi_supported; > + const char *vp_name[TIDSS_MAX_VPS]; /* Should match dt reg names */ > + const char *ovr_name[TIDSS_MAX_VPS]; /* Should match dt reg names */ > + const char *vpclk_name[TIDSS_MAX_VPS]; /* Should match dt clk names */ > + const enum dispc_bus_type vp_bus_type[TIDSS_MAX_VPS]; > + const enum dispc_bus_type output_port_bus_type[TIDSS_MAX_OUTPUT_PORTS]; > struct tidss_vp_feat vp_feat; > u32 num_planes; > const char *vid_name[TIDSS_MAX_PLANES]; /* Should match dt reg names */ > @@ -88,6 +92,7 @@ struct dispc_features { > extern const struct dispc_features dispc_k2g_feats; > extern const struct dispc_features dispc_am65x_feats; > extern const struct dispc_features dispc_j721e_feats; > +extern const struct dispc_features dispc_am625_feats; > > void dispc_set_irqenable(struct dispc_device *dispc, dispc_irq_t mask); > dispc_irq_t dispc_read_and_clear_irqstatus(struct dispc_device *dispc); > diff --git a/drivers/gpu/drm/tidss/tidss_drv.c b/drivers/gpu/drm/tidss/tidss_drv.c > index 15cd9b91b7e2..c5e119828823 100644 > --- a/drivers/gpu/drm/tidss/tidss_drv.c > +++ b/drivers/gpu/drm/tidss/tidss_drv.c > @@ -235,6 +235,7 @@ static const struct of_device_id tidss_of_table[] = { > { .compatible = "ti,k2g-dss", .data = &dispc_k2g_feats, }, > { .compatible = "ti,am65x-dss", .data = &dispc_am65x_feats, }, > { .compatible = "ti,j721e-dss", .data = &dispc_j721e_feats, }, > + { .compatible = "ti,am625-dss", .data = &dispc_am625_feats, }, > { } > }; > > diff --git a/drivers/gpu/drm/tidss/tidss_drv.h b/drivers/gpu/drm/tidss/tidss_drv.h > index d7f27b0b0315..0ce7ee5ccd5b 100644 > --- a/drivers/gpu/drm/tidss/tidss_drv.h > +++ b/drivers/gpu/drm/tidss/tidss_drv.h > @@ -9,8 +9,9 @@ > > #include <linux/spinlock.h> > > -#define TIDSS_MAX_PORTS 4 > +#define TIDSS_MAX_VPS 4 > #define TIDSS_MAX_PLANES 4 > +#define TIDSS_MAX_OUTPUT_PORTS 4 > > typedef u32 dispc_irq_t; > > @@ -22,7 +23,7 @@ struct tidss_device { > struct dispc_device *dispc; > > unsigned int num_crtcs; > - struct drm_crtc *crtcs[TIDSS_MAX_PORTS]; > + struct drm_crtc *crtcs[TIDSS_MAX_VPS]; > > unsigned int num_planes; > struct drm_plane *planes[TIDSS_MAX_PLANES]; > diff --git a/drivers/gpu/drm/tidss/tidss_irq.h b/drivers/gpu/drm/tidss/tidss_irq.h > index b512614d5863..a753f5e3ce15 100644 > --- a/drivers/gpu/drm/tidss/tidss_irq.h > +++ b/drivers/gpu/drm/tidss/tidss_irq.h > @@ -35,7 +35,7 @@ > > #define DSS_IRQ_VP_BIT_N(ch, bit) (4 + 4 * (ch) + (bit)) > #define DSS_IRQ_PLANE_BIT_N(plane, bit) \ > - (DSS_IRQ_VP_BIT_N(TIDSS_MAX_PORTS, 0) + 1 * (plane) + (bit)) > + (DSS_IRQ_VP_BIT_N(TIDSS_MAX_VPS, 0) + 1 * (plane) + (bit)) > > #define DSS_IRQ_VP_BIT(ch, bit) BIT(DSS_IRQ_VP_BIT_N((ch), (bit))) > #define DSS_IRQ_PLANE_BIT(plane, bit) \ > diff --git a/drivers/gpu/drm/tidss/tidss_kms.c b/drivers/gpu/drm/tidss/tidss_kms.c > index afb2879980c6..fc9c4eefd31d 100644 > --- a/drivers/gpu/drm/tidss/tidss_kms.c > +++ b/drivers/gpu/drm/tidss/tidss_kms.c > @@ -123,7 +123,7 @@ static int tidss_dispc_modeset_init(struct tidss_device *tidss) > u32 max_vps = feat->num_vps; > u32 max_planes = feat->num_planes; > > - struct pipe pipes[TIDSS_MAX_PORTS]; > + struct pipe pipes[TIDSS_MAX_VPS]; > u32 num_pipes = 0; > u32 crtc_mask; > Tomi
diff --git a/drivers/gpu/drm/tidss/tidss_dispc.c b/drivers/gpu/drm/tidss/tidss_dispc.c index ad93acc9abd2..dbc6a5b617ca 100644 --- a/drivers/gpu/drm/tidss/tidss_dispc.c +++ b/drivers/gpu/drm/tidss/tidss_dispc.c @@ -93,10 +93,13 @@ const struct dispc_features dispc_k2g_feats = { .common_regs = tidss_k2g_common_regs, .num_vps = 1, + .num_output_ports = 1, + .oldi_supported = false, .vp_name = { "vp1" }, .ovr_name = { "ovr1" }, .vpclk_name = { "vp1" }, .vp_bus_type = { DISPC_VP_DPI }, + .output_port_bus_type = { DISPC_VP_DPI }, .vp_feat = { .color = { .has_ctm = true, @@ -168,10 +171,13 @@ const struct dispc_features dispc_am65x_feats = { .common_regs = tidss_am65x_common_regs, .num_vps = 2, + .num_output_ports = 2, + .oldi_supported = true, .vp_name = { "vp1", "vp2" }, .ovr_name = { "ovr1", "ovr2" }, .vpclk_name = { "vp1", "vp2" }, .vp_bus_type = { DISPC_VP_OLDI, DISPC_VP_DPI }, + .output_port_bus_type = { DISPC_VP_OLDI, DISPC_VP_DPI }, .vp_feat = { .color = { .has_ctm = true, @@ -257,12 +263,16 @@ const struct dispc_features dispc_j721e_feats = { .common_regs = tidss_j721e_common_regs, .num_vps = 4, + .num_output_ports = 4, + .oldi_supported = false, .vp_name = { "vp1", "vp2", "vp3", "vp4" }, .ovr_name = { "ovr1", "ovr2", "ovr3", "ovr4" }, .vpclk_name = { "vp1", "vp2", "vp3", "vp4" }, /* Currently hard coded VP routing (see dispc_initial_config()) */ .vp_bus_type = { DISPC_VP_INTERNAL, DISPC_VP_DPI, DISPC_VP_INTERNAL, DISPC_VP_DPI, }, + .output_port_bus_type = { DISPC_VP_INTERNAL, DISPC_VP_DPI, + DISPC_VP_INTERNAL, DISPC_VP_DPI, }, .vp_feat = { .color = { .has_ctm = true, .gamma_size = 1024, @@ -275,6 +285,59 @@ const struct dispc_features dispc_j721e_feats = { .vid_order = { 1, 3, 0, 2 }, }; +const struct dispc_features dispc_am625_feats = { + .max_pclk_khz = { + [DISPC_VP_DPI] = 165000, + [DISPC_VP_OLDI] = 165000, + }, + + .scaling = { + .in_width_max_5tap_rgb = 1280, + .in_width_max_3tap_rgb = 2560, + .in_width_max_5tap_yuv = 2560, + .in_width_max_3tap_yuv = 4096, + .upscale_limit = 16, + .downscale_limit_5tap = 4, + .downscale_limit_3tap = 2, + /* + * The max supported pixel inc value is 255. The value + * of pixel inc is calculated like this: 1+(xinc-1)*bpp. + * The maximum bpp of all formats supported by the HW + * is 8. So the maximum supported xinc value is 32, + * because 1+(32-1)*8 < 255 < 1+(33-1)*4. + */ + .xinc_max = 32, + }, + + .subrev = DISPC_AM625, + + .common = "common", + .common_regs = tidss_am65x_common_regs, + + .num_vps = 2, + /* note: the 3rd port is not representative of a 3rd pipeline */ + .num_output_ports = 3, + .oldi_supported = true, + .vp_name = { "vp1", "vp2" }, + .ovr_name = { "ovr1", "ovr2" }, + .vpclk_name = { "vp1", "vp2" }, + .vp_bus_type = { DISPC_VP_OLDI, DISPC_VP_DPI }, + .output_port_bus_type = { DISPC_VP_OLDI, DISPC_VP_DPI, DISPC_VP_OLDI }, + + .vp_feat = { .color = { + .has_ctm = true, + .gamma_size = 256, + .gamma_type = TIDSS_GAMMA_8BIT, + }, + }, + + .num_planes = 2, + /* note: vid is plane_id 0 and vidl1 is plane_id 1 */ + .vid_name = { "vid", "vidl1" }, + .vid_lite = { false, true, }, + .vid_order = { 1, 0 }, +}; + static const u16 *dispc_common_regmap; struct dss_vp_data { @@ -287,12 +350,12 @@ struct dispc_device { void __iomem *base_common; void __iomem *base_vid[TIDSS_MAX_PLANES]; - void __iomem *base_ovr[TIDSS_MAX_PORTS]; - void __iomem *base_vp[TIDSS_MAX_PORTS]; + void __iomem *base_ovr[TIDSS_MAX_VPS]; + void __iomem *base_vp[TIDSS_MAX_VPS]; struct regmap *oldi_io_ctrl; - struct clk *vp_clk[TIDSS_MAX_PORTS]; + struct clk *vp_clk[TIDSS_MAX_VPS]; const struct dispc_features *feat; @@ -300,7 +363,7 @@ struct dispc_device { bool is_enabled; - struct dss_vp_data vp_data[TIDSS_MAX_PORTS]; + struct dss_vp_data vp_data[TIDSS_MAX_VPS]; u32 *fourccs; u32 num_fourccs; @@ -778,6 +841,7 @@ dispc_irq_t dispc_read_and_clear_irqstatus(struct dispc_device *dispc) return dispc_k2g_read_and_clear_irqstatus(dispc); case DISPC_AM65X: case DISPC_J721E: + case DISPC_AM625: return dispc_k3_read_and_clear_irqstatus(dispc); default: WARN_ON(1); @@ -793,6 +857,7 @@ void dispc_set_irqenable(struct dispc_device *dispc, dispc_irq_t mask) break; case DISPC_AM65X: case DISPC_J721E: + case DISPC_AM625: dispc_k3_set_irqenable(dispc, mask); break; default: @@ -1116,7 +1181,7 @@ enum drm_mode_status dispc_vp_mode_valid(struct dispc_device *dispc, const struct drm_display_mode *mode) { u32 hsw, hfp, hbp, vsw, vfp, vbp; - enum dispc_vp_bus_type bus_type; + enum dispc_bus_type bus_type; int max_pclk; bus_type = dispc->feat->vp_bus_type[hw_videoport]; @@ -1282,6 +1347,7 @@ void dispc_ovr_set_plane(struct dispc_device *dispc, u32 hw_plane, x, y, layer); break; case DISPC_AM65X: + case DISPC_AM625: dispc_am65x_ovr_set_plane(dispc, hw_plane, hw_videoport, x, y, layer); break; @@ -2205,6 +2271,7 @@ static void dispc_plane_init(struct dispc_device *dispc) break; case DISPC_AM65X: case DISPC_J721E: + case DISPC_AM625: dispc_k3_plane_init(dispc); break; default: @@ -2310,6 +2377,7 @@ static void dispc_vp_write_gamma_table(struct dispc_device *dispc, dispc_k2g_vp_write_gamma_table(dispc, hw_videoport); break; case DISPC_AM65X: + case DISPC_AM625: dispc_am65x_vp_write_gamma_table(dispc, hw_videoport); break; case DISPC_J721E: @@ -2583,7 +2651,7 @@ int dispc_runtime_resume(struct dispc_device *dispc) REG_GET(dispc, DSS_SYSSTATUS, 2, 2), REG_GET(dispc, DSS_SYSSTATUS, 3, 3)); - if (dispc->feat->subrev == DISPC_AM65X) + if (dispc->feat->oldi_supported) dev_dbg(dispc->dev, "OLDI RESETDONE %d,%d,%d\n", REG_GET(dispc, DSS_SYSSTATUS, 5, 5), REG_GET(dispc, DSS_SYSSTATUS, 6, 6), diff --git a/drivers/gpu/drm/tidss/tidss_dispc.h b/drivers/gpu/drm/tidss/tidss_dispc.h index e49432f0abf5..51db500590ee 100644 --- a/drivers/gpu/drm/tidss/tidss_dispc.h +++ b/drivers/gpu/drm/tidss/tidss_dispc.h @@ -50,7 +50,7 @@ struct dispc_errata { bool i2000; /* DSS Does Not Support YUV Pixel Data Formats */ }; -enum dispc_vp_bus_type { +enum dispc_bus_type { DISPC_VP_DPI, /* DPI output */ DISPC_VP_OLDI, /* OLDI (LVDS) output */ DISPC_VP_INTERNAL, /* SoC internal routing */ @@ -61,6 +61,7 @@ enum dispc_dss_subrevision { DISPC_K2G, DISPC_AM65X, DISPC_J721E, + DISPC_AM625, }; struct dispc_features { @@ -74,10 +75,13 @@ struct dispc_features { const char *common; const u16 *common_regs; u32 num_vps; - const char *vp_name[TIDSS_MAX_PORTS]; /* Should match dt reg names */ - const char *ovr_name[TIDSS_MAX_PORTS]; /* Should match dt reg names */ - const char *vpclk_name[TIDSS_MAX_PORTS]; /* Should match dt clk names */ - const enum dispc_vp_bus_type vp_bus_type[TIDSS_MAX_PORTS]; + u32 num_output_ports; + bool oldi_supported; + const char *vp_name[TIDSS_MAX_VPS]; /* Should match dt reg names */ + const char *ovr_name[TIDSS_MAX_VPS]; /* Should match dt reg names */ + const char *vpclk_name[TIDSS_MAX_VPS]; /* Should match dt clk names */ + const enum dispc_bus_type vp_bus_type[TIDSS_MAX_VPS]; + const enum dispc_bus_type output_port_bus_type[TIDSS_MAX_OUTPUT_PORTS]; struct tidss_vp_feat vp_feat; u32 num_planes; const char *vid_name[TIDSS_MAX_PLANES]; /* Should match dt reg names */ @@ -88,6 +92,7 @@ struct dispc_features { extern const struct dispc_features dispc_k2g_feats; extern const struct dispc_features dispc_am65x_feats; extern const struct dispc_features dispc_j721e_feats; +extern const struct dispc_features dispc_am625_feats; void dispc_set_irqenable(struct dispc_device *dispc, dispc_irq_t mask); dispc_irq_t dispc_read_and_clear_irqstatus(struct dispc_device *dispc); diff --git a/drivers/gpu/drm/tidss/tidss_drv.c b/drivers/gpu/drm/tidss/tidss_drv.c index 15cd9b91b7e2..c5e119828823 100644 --- a/drivers/gpu/drm/tidss/tidss_drv.c +++ b/drivers/gpu/drm/tidss/tidss_drv.c @@ -235,6 +235,7 @@ static const struct of_device_id tidss_of_table[] = { { .compatible = "ti,k2g-dss", .data = &dispc_k2g_feats, }, { .compatible = "ti,am65x-dss", .data = &dispc_am65x_feats, }, { .compatible = "ti,j721e-dss", .data = &dispc_j721e_feats, }, + { .compatible = "ti,am625-dss", .data = &dispc_am625_feats, }, { } }; diff --git a/drivers/gpu/drm/tidss/tidss_drv.h b/drivers/gpu/drm/tidss/tidss_drv.h index d7f27b0b0315..0ce7ee5ccd5b 100644 --- a/drivers/gpu/drm/tidss/tidss_drv.h +++ b/drivers/gpu/drm/tidss/tidss_drv.h @@ -9,8 +9,9 @@ #include <linux/spinlock.h> -#define TIDSS_MAX_PORTS 4 +#define TIDSS_MAX_VPS 4 #define TIDSS_MAX_PLANES 4 +#define TIDSS_MAX_OUTPUT_PORTS 4 typedef u32 dispc_irq_t; @@ -22,7 +23,7 @@ struct tidss_device { struct dispc_device *dispc; unsigned int num_crtcs; - struct drm_crtc *crtcs[TIDSS_MAX_PORTS]; + struct drm_crtc *crtcs[TIDSS_MAX_VPS]; unsigned int num_planes; struct drm_plane *planes[TIDSS_MAX_PLANES]; diff --git a/drivers/gpu/drm/tidss/tidss_irq.h b/drivers/gpu/drm/tidss/tidss_irq.h index b512614d5863..a753f5e3ce15 100644 --- a/drivers/gpu/drm/tidss/tidss_irq.h +++ b/drivers/gpu/drm/tidss/tidss_irq.h @@ -35,7 +35,7 @@ #define DSS_IRQ_VP_BIT_N(ch, bit) (4 + 4 * (ch) + (bit)) #define DSS_IRQ_PLANE_BIT_N(plane, bit) \ - (DSS_IRQ_VP_BIT_N(TIDSS_MAX_PORTS, 0) + 1 * (plane) + (bit)) + (DSS_IRQ_VP_BIT_N(TIDSS_MAX_VPS, 0) + 1 * (plane) + (bit)) #define DSS_IRQ_VP_BIT(ch, bit) BIT(DSS_IRQ_VP_BIT_N((ch), (bit))) #define DSS_IRQ_PLANE_BIT(plane, bit) \ diff --git a/drivers/gpu/drm/tidss/tidss_kms.c b/drivers/gpu/drm/tidss/tidss_kms.c index afb2879980c6..fc9c4eefd31d 100644 --- a/drivers/gpu/drm/tidss/tidss_kms.c +++ b/drivers/gpu/drm/tidss/tidss_kms.c @@ -123,7 +123,7 @@ static int tidss_dispc_modeset_init(struct tidss_device *tidss) u32 max_vps = feat->num_vps; u32 max_planes = feat->num_planes; - struct pipe pipes[TIDSS_MAX_PORTS]; + struct pipe pipes[TIDSS_MAX_VPS]; u32 num_pipes = 0; u32 crtc_mask;
Add support for the DSS controller on TI's new AM625 SoC in the tidss driver. The first video port (VP0) in am625-dss can output OLDI signals through 2 OLDI TXes. A 3rd output port has been added with "DISPC_VP_OLDI" bus type. DSS controllers before AM625 had a 1 to 1 coupling between Videoports and Output Ports. Since this stands no longer to be true for AM625 DSS, this couppling has been separated with the introduction of output port based variables. This will help address the addition of the 2nd OLDI TX over VP0 as the 3rd output port. Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com> --- drivers/gpu/drm/tidss/tidss_dispc.c | 80 ++++++++++++++++++++++++++--- drivers/gpu/drm/tidss/tidss_dispc.h | 15 ++++-- drivers/gpu/drm/tidss/tidss_drv.c | 1 + drivers/gpu/drm/tidss/tidss_drv.h | 5 +- drivers/gpu/drm/tidss/tidss_irq.h | 2 +- drivers/gpu/drm/tidss/tidss_kms.c | 2 +- 6 files changed, 90 insertions(+), 15 deletions(-)