diff mbox series

[14/15] drm/vc4: hdmi: Correct interlaced timings again

Message ID 20221207-rpi-hvs-crtc-misc-v1-14-1f8e0770798b@cerno.tech (mailing list archive)
State New, archived
Headers show
Series drm/vc4: Misc fixes and improvements for the HVS and CRTCs | expand

Commit Message

Maxime Ripard Dec. 7, 2022, 11:53 a.m. UTC 
From: Dave Stevenson <dave.stevenson@raspberrypi.com>

The back porch timings were correct, only the sync offset was wrong.
Correct timing is now reported for 1080i and 576i, but the h offset is
incorrect for 480i for non-obvious reasons.

Fixes: c0ba150ce468 ("drm/vc4: Correct HDMI timing registers for interlaced modes")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/vc4/vc4_hdmi.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index 12a00d644b61..e027381b7331 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -1298,11 +1298,12 @@  static void vc5_hdmi_set_timings(struct vc4_hdmi *vc4_hdmi,
 		     VC4_SET_FIELD(mode->crtc_vdisplay, VC5_HDMI_VERTA_VAL));
 	u32 vertb = (VC4_SET_FIELD(mode->htotal >> (2 - pixel_rep),
 				   VC5_HDMI_VERTB_VSPO) |
-		     VC4_SET_FIELD(mode->crtc_vtotal - mode->crtc_vsync_end,
+		     VC4_SET_FIELD(mode->crtc_vtotal - mode->crtc_vsync_end +
+				   interlaced,
 				   VC4_HDMI_VERTB_VBP));
 	u32 vertb_even = (VC4_SET_FIELD(0, VC5_HDMI_VERTB_VSPO) |
 			  VC4_SET_FIELD(mode->crtc_vtotal -
-					mode->crtc_vsync_end - interlaced,
+					mode->crtc_vsync_end,
 					VC4_HDMI_VERTB_VBP));
 	unsigned long flags;
 	unsigned char gcp;