From patchwork Fri Dec 30 15:35:52 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Robert Foss X-Patchwork-Id: 13084455 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from gabe.freedesktop.org (gabe.freedesktop.org [131.252.210.177]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id C5969C46467 for ; Fri, 30 Dec 2022 15:36:43 +0000 (UTC) Received: from gabe.freedesktop.org (localhost [127.0.0.1]) by gabe.freedesktop.org (Postfix) with ESMTP id 7E83A10E44D; Fri, 30 Dec 2022 15:36:23 +0000 (UTC) Received: from mail-wm1-x32f.google.com (mail-wm1-x32f.google.com [IPv6:2a00:1450:4864:20::32f]) by gabe.freedesktop.org (Postfix) with ESMTPS id 593E810E445 for ; Fri, 30 Dec 2022 15:36:17 +0000 (UTC) Received: by mail-wm1-x32f.google.com with SMTP id c65-20020a1c3544000000b003cfffd00fc0so18631274wma.1 for ; Fri, 30 Dec 2022 07:36:17 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:to:from:from:to:cc:subject:date:message-id :reply-to; bh=qcKidAPkiHJovb9B7oYeIKp0R8mDUvOVBVJ1I025NEo=; b=OewdUX6KjHrsYhZ8u0FaGMUI6AFcn456DYI5nbUlJmpaynZldmOBCuQp1kDl9LwbEJ GoHLE8ZbvWfG0BuGm3wZXzucykQLOJEoFHsElos0LUmxHnzf+QX2e7SPry9g+7s8lPix CJobGiD5cPfylsfC5G/4FIvUnPuF9A65JCTDmYlPBmHoonlEMWhQwR6b/bKfzlKsZ9z+ 7xiJ44B8FbsusasDMgr2TMC+0oNHtDeyh12ZImKOmwVgXCFgT+qiNyo0IZzW8H1buIYu bT0hpmoafHARyK+4RlncXzUhopm4nfCi9yUTZfLtvIX5osP8YY17QOAQveGJ0jSUkiCD KrsQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=qcKidAPkiHJovb9B7oYeIKp0R8mDUvOVBVJ1I025NEo=; b=H1vAFBbFyvzyHs0JL5aRFsrd9LPUvmqb4pkt/lMSafv9TO1S34c2oLawrCuALi3hjX 9Hw88FtR6AC3nDMNtAzXKAptAftjXhoZ/xESvKRAqqPXg6HsujsG1Hubvfs2FHxH4wZJ U5eSpeToKoLN7mB5K5RMI9Y2bYw064CJJ+30NAQ9FPRBBJu2lNK+sBb4Mh31m9XpJ1VI PpNPKEyWh+kPfY2YUJjL9gFbV1Ytjkoq/LBCrxRIdSNLTjwutJmpHisOs3GEK0Ha3UFD PfTFVTEwRDFSY0SuPB3Pc9GQ7Pn/r/zL/s4DKue5WXu2MkwLHVOUvsUl3VGVgmIus6Bw +p0w== X-Gm-Message-State: AFqh2kplAb410kAywfIbrx/559a64vnJBBb5pOFr8tiudDKir7DImG6E rpx34+oqQOGLmOYLRrapdc1BFg== X-Google-Smtp-Source: AMrXdXuXvKB4YJu+4z8wbT117CWJFgbrKusx4Lw6Y0k/iI0QWhUHbeE5/95/r4lwz6CB4MmlENBPGQ== X-Received: by 2002:a1c:4b14:0:b0:3d3:5ade:4317 with SMTP id y20-20020a1c4b14000000b003d35ade4317mr22446377wma.8.1672414576864; Fri, 30 Dec 2022 07:36:16 -0800 (PST) Received: from prec5560.. (freifunk-gw.bsa1-cpe1.syseleven.net. [176.74.57.43]) by smtp.gmail.com with ESMTPSA id l42-20020a05600c1d2a00b003cfbbd54178sm49857993wms.2.2022.12.30.07.36.15 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Fri, 30 Dec 2022 07:36:16 -0800 (PST) From: Robert Foss To: robdclark@gmail.com, quic_abhinavk@quicinc.com, dmitry.baryshkov@linaro.org, sean@poorly.run, airlied@gmail.com, daniel@ffwll.ch, robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org, agross@kernel.org, andersson@kernel.org, konrad.dybcio@somainline.org, quic_jesszhan@quicinc.com, robert.foss@linaro.org, angelogioacchino.delregno@somainline.org, loic.poulain@linaro.org, vkoul@kernel.org, a39.skl@gmail.com, quic_khsieh@quicinc.com, quic_vpolimer@quicinc.com, swboyd@chromium.org, dianders@chromium.org, liushixin2@huawei.com, linux-arm-msm@vger.kernel.org, dri-devel@lists.freedesktop.org, freedreno@lists.freedesktop.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Jonathan Marek , vinod.koul@linaro.org Subject: [PATCH v4 09/11] arm64: dts: qcom: sm8350: Add display system nodes Date: Fri, 30 Dec 2022 16:35:52 +0100 Message-Id: <20221230153554.105856-10-robert.foss@linaro.org> X-Mailer: git-send-email 2.34.1 In-Reply-To: <20221230153554.105856-1-robert.foss@linaro.org> References: <20221230153554.105856-1-robert.foss@linaro.org> MIME-Version: 1.0 X-BeenThere: dri-devel@lists.freedesktop.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: Direct Rendering Infrastructure - Development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: dri-devel-bounces@lists.freedesktop.org Sender: "dri-devel" Add mdss, mdss_mdp, dsi0, dsi0_phy nodes. With these nodes the display subsystem is configured to support one DSI output. Signed-off-by: Robert Foss Reviewed-by: Jessica Zhang Tested-by: Jessica Zhang #SM8350 (HDK) --- arch/arm64/boot/dts/qcom/sm8350.dtsi | 297 ++++++++++++++++++++++++++- 1 file changed, 293 insertions(+), 4 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi index bdefbbb2e38f..a80c0bf6d7fd 100644 --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi @@ -3,6 +3,7 @@ * Copyright (c) 2020, Linaro Limited */ +#include #include #include #include @@ -2535,14 +2536,302 @@ usb_2_dwc3: usb@a800000 { }; }; + mdss: display-subsystem@ae00000 { + compatible = "qcom,sm8350-mdss"; + reg = <0 0x0ae00000 0 0x1000>; + reg-names = "mdss"; + + interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>, + <&mmss_noc MASTER_MDP1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "mdp0-mem", "mdp1-mem"; + + power-domains = <&dispcc MDSS_GDSC>; + resets = <&dispcc DISP_CC_MDSS_CORE_BCR>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&gcc GCC_DISP_SF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", "bus", "nrt_bus", "core"; + + interrupts = ; + interrupt-controller; + #interrupt-cells = <1>; + + iommus = <&apps_smmu 0x820 0x402>; + + status = "disabled"; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + dpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + /* TODO: opp-200000000 should work with + * &rpmhpd_opp_low_svs, but one some of + * sm8350_hdk boards reboot using this + * opp. + */ + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-345000000 { + opp-hz = /bits/ 64 <345000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-460000000 { + opp-hz = /bits/ 64 <460000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + + mdss_mdp: display-controller@ae01000 { + compatible = "qcom,sm8350-dpu"; + reg = <0 0x0ae01000 0 0x8f000>, + <0 0x0aeb0000 0 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&gcc GCC_DISP_SF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "bus", + "nrt_bus", + "iface", + "lut", + "core", + "vsync"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <19200000>; + + operating-points-v2 = <&dpu_opp_table>; + power-domains = <&rpmhpd SM8350_MMCX>; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + }; + }; + + mdss_dsi0: dsi@ae94000 { + compatible = "qcom,mdss-dsi-ctrl"; + reg = <0 0x0ae94000 0 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi0_phy 0>, + <&mdss_dsi0_phy 1>; + + operating-points-v2 = <&dsi0_opp_table>; + power-domains = <&rpmhpd SM8350_MMCX>; + + phys = <&mdss_dsi0_phy>; + + status = "disabled"; + + dsi0_opp_table: opp-table { + compatible = "operating-points-v2"; + + /* TODO: opp-187500000 should work with + * &rpmhpd_opp_low_svs, but one some of + * sm8350_hdk boards reboot using this + * opp. + */ + opp-187500000 { + opp-hz = /bits/ 64 <187500000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-358000000 { + opp-hz = /bits/ 64 <358000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + }; + }; + }; + }; + + mdss_dsi0_phy: phy@ae94400 { + compatible = "qcom,dsi-phy-5nm-8350"; + reg = <0 0x0ae94400 0 0x200>, + <0 0x0ae94600 0 0x280>, + <0 0x0ae94900 0 0x260>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + + status = "disabled"; + }; + + mdss_dsi1: dsi@ae96000 { + compatible = "qcom,mdss-dsi-ctrl"; + reg = <0 0x0ae96000 0 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>, + <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK1_CLK>, + <&dispcc DISP_CC_MDSS_ESC1_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi1_phy 0>, + <&mdss_dsi1_phy 1>; + + operating-points-v2 = <&dsi1_opp_table>; + power-domains = <&rpmhpd SM8350_MMCX>; + + phys = <&mdss_dsi1_phy>; + + status = "disabled"; + + dsi1_opp_table: opp-table { + compatible = "operating-points-v2"; + + /* TODO: opp-187500000 should work with + * &rpmhpd_opp_low_svs, but one some of + * sm8350_hdk boards reboot using this + * opp. + */ + opp-187500000 { + opp-hz = /bits/ 64 <187500000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-358000000 { + opp-hz = /bits/ 64 <358000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi1_in: endpoint { + }; + }; + + port@1 { + reg = <1>; + dsi1_out: endpoint { + }; + }; + }; + }; + + mdss_dsi1_phy: phy@ae96400 { + compatible = "qcom,dsi-phy-5nm-8350"; + reg = <0 0x0ae96400 0 0x200>, + <0 0x0ae96600 0 0x280>, + <0 0x0ae96900 0 0x260>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + + status = "disabled"; + }; + }; + dispcc: clock-controller@af00000 { compatible = "qcom,sm8350-dispcc"; reg = <0 0x0af00000 0 0x10000>; clocks = <&rpmhcc RPMH_CXO_CLK>, - <0>, - <0>, - <0>, - <0>, + <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>, + <0>, <0>, <0>, <0>; clock-names = "bi_tcxo",