| Message ID | 20230112042104.4107253-5-treapking@chromium.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Register Type-C mode-switch in DP bridge endpoints | expand |
On 12/01/2023 06:20, Pin-yen Lin wrote: > Analogix 7625 can be used in systems to switch the DP traffic between > two downstreams, which can be USB Type-C DisplayPort alternate mode > lane or regular DisplayPort output ports. > > Update the binding to accommodate this usage by introducing a > data-lanes and a mode-switch property on endpoints. > > Also include the link to the product brief in the bindings. > > Signed-off-by: Pin-yen Lin <treapking@chromium.org> > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > Reviewed-by: Chen-Yu Tsai <wenst@chromium.org> > Tested-by: Chen-Yu Tsai <wenst@chromium.org> > Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> > > --- > > Changes in v10: > - Collected Reviewed-by and Tested-by tags > > Changes in v9: > - Collected Reviewed-by tag > > Changes in v8: > - Updated anx7625 bindings for data-lane property > - Fixed the subject prefix > > Changes in v7: > - Fixed issues reported by dt_binding_check > - Updated the schema and the example dts for data-lanes. > - Changed to generic naming for the example dts node. > > Changes in v6: > - Remove switches node and use endpoints and data-lanes property to > describe the connections. > > .../display/bridge/analogix,anx7625.yaml | 99 ++++++++++++++++++- > 1 file changed, 96 insertions(+), 3 deletions(-) > > diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml > index 4590186c4a0b..b49a350c40e3 100644 > --- a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml > +++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml > @@ -12,7 +12,8 @@ maintainers: > > description: | > The ANX7625 is an ultra-low power 4K Mobile HD Transmitter > - designed for portable devices. > + designed for portable devices. Product brief is available at > + https://www.analogix.com/en/system/files/AA-002291-PB-6-ANX7625_ProductBrief.pdf > > properties: > compatible: > @@ -112,10 +113,48 @@ properties: > data-lanes: true > > port@1: > - $ref: /schemas/graph.yaml#/properties/port > + $ref: /schemas/graph.yaml#/$defs/port-base > description: > Video port for panel or connector. > > + patternProperties: > + "^endpoint@[01]$": > + $ref: /schemas/graph.yaml#/$defs/endpoint-base > + unevaluatedProperties: false > + > + properties: > + reg: > + maxItems: 1 Please remove duplicates to the graph.yaml. You have several of them here. > + > + remote-endpoint: true > + > + data-lanes: > + oneOf: > + - items: > + - enum: [0, 1, 2, 3] > + > + - items: > + - const: 0 > + - const: 1 > + > + - items: > + - const: 2 > + - const: 3 > + > + - items: > + - const: 0 > + - const: 1 > + - const: 2 > + - const: 3 > + > + mode-switch: > + type: boolean > + description: Register this node as a Type-C mode switch or not. > + > + required: > + - reg > + - remote-endpoint > + > required: > - port@0 > - port@1 > @@ -164,8 +203,12 @@ examples: > }; > > mipi2dp_bridge_out: port@1 { > + #address-cells = <1>; > + #size-cells = <0>; > + > reg = <1>; > - anx7625_out: endpoint { > + anx7625_out: endpoint@0 { But why? It's perfectly fine from the graph perspective to omit the index if there is jus a single endpoint. > + reg = <0>; > remote-endpoint = <&panel_in>; > }; > }; > @@ -186,3 +229,53 @@ examples: > }; > }; > }; > + - | > + i2c3 { > + #address-cells = <1>; > + #size-cells = <0>; > + > + encoder@58 { > + compatible = "analogix,anx7625"; > + reg = <0x58>; > + pinctrl-names = "default"; > + pinctrl-0 = <&anx7625_dp_pins>; > + enable-gpios = <&pio 176 GPIO_ACTIVE_HIGH>; > + reset-gpios = <&pio 177 GPIO_ACTIVE_HIGH>; > + vdd10-supply = <&pp1100_dpbrdg>; > + vdd18-supply = <&pp1800_dpbrdg_dx>; > + vdd33-supply = <&pp3300_dpbrdg_dx>; > + analogix,audio-enable; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + anx7625_dp_in: endpoint { > + bus-type = <7>; > + remote-endpoint = <&dpi_out>; > + }; > + }; > + > + port@1 { > + #address-cells = <1>; > + #size-cells = <0>; > + > + reg = <1>; > + anx_typec0: endpoint@0 { > + reg = <0>; > + mode-switch; > + data-lanes = <0 1>; > + remote-endpoint = <&typec_port0>; > + }; > + anx_typec1: endpoint@1 { > + reg = <1>; > + mode-switch; > + data-lanes = <2 3>; > + remote-endpoint = <&typec_port1>; > + }; > + }; > + }; > + }; > + };
Hi Dmitry, Thanks for the review. On Thu, Jan 12, 2023 at 12:43 PM Dmitry Baryshkov <dmitry.baryshkov@linaro.org> wrote: > > On 12/01/2023 06:20, Pin-yen Lin wrote: > > Analogix 7625 can be used in systems to switch the DP traffic between > > two downstreams, which can be USB Type-C DisplayPort alternate mode > > lane or regular DisplayPort output ports. > > > > Update the binding to accommodate this usage by introducing a > > data-lanes and a mode-switch property on endpoints. > > > > Also include the link to the product brief in the bindings. > > > > Signed-off-by: Pin-yen Lin <treapking@chromium.org> > > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > > Reviewed-by: Chen-Yu Tsai <wenst@chromium.org> > > Tested-by: Chen-Yu Tsai <wenst@chromium.org> > > Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> > > > > --- > > > > Changes in v10: > > - Collected Reviewed-by and Tested-by tags > > > > Changes in v9: > > - Collected Reviewed-by tag > > > > Changes in v8: > > - Updated anx7625 bindings for data-lane property > > - Fixed the subject prefix > > > > Changes in v7: > > - Fixed issues reported by dt_binding_check > > - Updated the schema and the example dts for data-lanes. > > - Changed to generic naming for the example dts node. > > > > Changes in v6: > > - Remove switches node and use endpoints and data-lanes property to > > describe the connections. > > > > .../display/bridge/analogix,anx7625.yaml | 99 ++++++++++++++++++- > > 1 file changed, 96 insertions(+), 3 deletions(-) > > > > diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml > > index 4590186c4a0b..b49a350c40e3 100644 > > --- a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml > > +++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml > > @@ -12,7 +12,8 @@ maintainers: > > > > description: | > > The ANX7625 is an ultra-low power 4K Mobile HD Transmitter > > - designed for portable devices. > > + designed for portable devices. Product brief is available at > > + https://www.analogix.com/en/system/files/AA-002291-PB-6-ANX7625_ProductBrief.pdf > > > > properties: > > compatible: > > @@ -112,10 +113,48 @@ properties: > > data-lanes: true > > > > port@1: > > - $ref: /schemas/graph.yaml#/properties/port > > + $ref: /schemas/graph.yaml#/$defs/port-base > > description: > > Video port for panel or connector. > > > > + patternProperties: > > + "^endpoint@[01]$": > > + $ref: /schemas/graph.yaml#/$defs/endpoint-base > > + unevaluatedProperties: false > > + > > + properties: > > + reg: > > + maxItems: 1 > > Please remove duplicates to the graph.yaml. You have several of them here. I'll fix this in v11. > > > + > > + remote-endpoint: true > > + > > + data-lanes: > > + oneOf: > > + - items: > > + - enum: [0, 1, 2, 3] > > + > > + - items: > > + - const: 0 > > + - const: 1 > > + > > + - items: > > + - const: 2 > > + - const: 3 > > + > > + - items: > > + - const: 0 > > + - const: 1 > > + - const: 2 > > + - const: 3 > > + > > + mode-switch: > > + type: boolean > > + description: Register this node as a Type-C mode switch or not. > > + > > + required: > > + - reg > > + - remote-endpoint > > + > > required: > > - port@0 > > - port@1 > > @@ -164,8 +203,12 @@ examples: > > }; > > > > mipi2dp_bridge_out: port@1 { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > reg = <1>; > > - anx7625_out: endpoint { > > + anx7625_out: endpoint@0 { > > But why? It's perfectly fine from the graph perspective to omit the > index if there is jus a single endpoint. This is because "reg" property is added as a required property. Do you suggest making "reg" property optional and only add it when there are multiple ports? > > > + reg = <0>; > > remote-endpoint = <&panel_in>; > > }; > > }; > > @@ -186,3 +229,53 @@ examples: > > }; > > }; > > }; > > + - | > > + i2c3 { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + encoder@58 { > > + compatible = "analogix,anx7625"; > > + reg = <0x58>; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&anx7625_dp_pins>; > > + enable-gpios = <&pio 176 GPIO_ACTIVE_HIGH>; > > + reset-gpios = <&pio 177 GPIO_ACTIVE_HIGH>; > > + vdd10-supply = <&pp1100_dpbrdg>; > > + vdd18-supply = <&pp1800_dpbrdg_dx>; > > + vdd33-supply = <&pp3300_dpbrdg_dx>; > > + analogix,audio-enable; > > + > > + ports { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + port@0 { > > + reg = <0>; > > + anx7625_dp_in: endpoint { > > + bus-type = <7>; > > + remote-endpoint = <&dpi_out>; > > + }; > > + }; > > + > > + port@1 { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + reg = <1>; > > + anx_typec0: endpoint@0 { > > + reg = <0>; > > + mode-switch; > > + data-lanes = <0 1>; > > + remote-endpoint = <&typec_port0>; > > + }; > > + anx_typec1: endpoint@1 { > > + reg = <1>; > > + mode-switch; > > + data-lanes = <2 3>; > > + remote-endpoint = <&typec_port1>; > > + }; > > + }; > > + }; > > + }; > > + }; > > -- > With best wishes > Dmitry > Best regards, Pin-yen
On Thu, 12 Jan 2023 at 07:26, Pin-yen Lin <treapking@chromium.org> wrote: > > Hi Dmitry, > > Thanks for the review. > > On Thu, Jan 12, 2023 at 12:43 PM Dmitry Baryshkov > <dmitry.baryshkov@linaro.org> wrote: > > > > On 12/01/2023 06:20, Pin-yen Lin wrote: > > > Analogix 7625 can be used in systems to switch the DP traffic between > > > two downstreams, which can be USB Type-C DisplayPort alternate mode > > > lane or regular DisplayPort output ports. > > > > > > Update the binding to accommodate this usage by introducing a > > > data-lanes and a mode-switch property on endpoints. > > > > > > Also include the link to the product brief in the bindings. > > > > > > Signed-off-by: Pin-yen Lin <treapking@chromium.org> > > > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > > > Reviewed-by: Chen-Yu Tsai <wenst@chromium.org> > > > Tested-by: Chen-Yu Tsai <wenst@chromium.org> > > > Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> > > > > > > --- > > > > > > Changes in v10: > > > - Collected Reviewed-by and Tested-by tags > > > > > > Changes in v9: > > > - Collected Reviewed-by tag > > > > > > Changes in v8: > > > - Updated anx7625 bindings for data-lane property > > > - Fixed the subject prefix > > > > > > Changes in v7: > > > - Fixed issues reported by dt_binding_check > > > - Updated the schema and the example dts for data-lanes. > > > - Changed to generic naming for the example dts node. > > > > > > Changes in v6: > > > - Remove switches node and use endpoints and data-lanes property to > > > describe the connections. > > > > > > .../display/bridge/analogix,anx7625.yaml | 99 ++++++++++++++++++- > > > 1 file changed, 96 insertions(+), 3 deletions(-) > > > > > > diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml > > > index 4590186c4a0b..b49a350c40e3 100644 > > > --- a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml > > > +++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml > > > @@ -12,7 +12,8 @@ maintainers: > > > > > > description: | > > > The ANX7625 is an ultra-low power 4K Mobile HD Transmitter > > > - designed for portable devices. > > > + designed for portable devices. Product brief is available at > > > + https://www.analogix.com/en/system/files/AA-002291-PB-6-ANX7625_ProductBrief.pdf > > > > > > properties: > > > compatible: > > > @@ -112,10 +113,48 @@ properties: > > > data-lanes: true > > > > > > port@1: > > > - $ref: /schemas/graph.yaml#/properties/port > > > + $ref: /schemas/graph.yaml#/$defs/port-base > > > description: > > > Video port for panel or connector. > > > > > > + patternProperties: > > > + "^endpoint@[01]$": > > > + $ref: /schemas/graph.yaml#/$defs/endpoint-base > > > + unevaluatedProperties: false > > > + > > > + properties: > > > + reg: > > > + maxItems: 1 > > > > Please remove duplicates to the graph.yaml. You have several of them here. > > I'll fix this in v11. > > > > > + > > > + remote-endpoint: true > > > + > > > + data-lanes: > > > + oneOf: > > > + - items: > > > + - enum: [0, 1, 2, 3] > > > + > > > + - items: > > > + - const: 0 > > > + - const: 1 > > > + > > > + - items: > > > + - const: 2 > > > + - const: 3 > > > + > > > + - items: > > > + - const: 0 > > > + - const: 1 > > > + - const: 2 > > > + - const: 3 > > > + > > > + mode-switch: > > > + type: boolean > > > + description: Register this node as a Type-C mode switch or not. > > > + > > > + required: > > > + - reg > > > + - remote-endpoint > > > + > > > required: > > > - port@0 > > > - port@1 > > > @@ -164,8 +203,12 @@ examples: > > > }; > > > > > > mipi2dp_bridge_out: port@1 { > > > + #address-cells = <1>; > > > + #size-cells = <0>; > > > + > > > reg = <1>; > > > - anx7625_out: endpoint { > > > + anx7625_out: endpoint@0 { > > > > But why? It's perfectly fine from the graph perspective to omit the > > index if there is jus a single endpoint. > > This is because "reg" property is added as a required property. Do you > suggest making "reg" property optional and only add it when there are > multiple ports? Yes. I think it makes sense. > > > > > + reg = <0>; > > > remote-endpoint = <&panel_in>; > > > }; > > > }; > > > @@ -186,3 +229,53 @@ examples: > > > }; > > > }; > > > }; > > > + - | > > > + i2c3 { > > > + #address-cells = <1>; > > > + #size-cells = <0>; > > > + > > > + encoder@58 { > > > + compatible = "analogix,anx7625"; > > > + reg = <0x58>; > > > + pinctrl-names = "default"; > > > + pinctrl-0 = <&anx7625_dp_pins>; > > > + enable-gpios = <&pio 176 GPIO_ACTIVE_HIGH>; > > > + reset-gpios = <&pio 177 GPIO_ACTIVE_HIGH>; > > > + vdd10-supply = <&pp1100_dpbrdg>; > > > + vdd18-supply = <&pp1800_dpbrdg_dx>; > > > + vdd33-supply = <&pp3300_dpbrdg_dx>; > > > + analogix,audio-enable; > > > + > > > + ports { > > > + #address-cells = <1>; > > > + #size-cells = <0>; > > > + > > > + port@0 { > > > + reg = <0>; > > > + anx7625_dp_in: endpoint { > > > + bus-type = <7>; > > > + remote-endpoint = <&dpi_out>; > > > + }; > > > + }; > > > + > > > + port@1 { > > > + #address-cells = <1>; > > > + #size-cells = <0>; > > > + > > > + reg = <1>; > > > + anx_typec0: endpoint@0 { > > > + reg = <0>; > > > + mode-switch; > > > + data-lanes = <0 1>; > > > + remote-endpoint = <&typec_port0>; > > > + }; > > > + anx_typec1: endpoint@1 { > > > + reg = <1>; > > > + mode-switch; > > > + data-lanes = <2 3>; > > > + remote-endpoint = <&typec_port1>; > > > + }; > > > + }; > > > + }; > > > + }; > > > + }; > > > > -- > > With best wishes > > Dmitry > > > > Best regards, > Pin-yen
On Wed, Jan 11, 2023 at 10:21 PM Pin-yen Lin <treapking@chromium.org> wrote: > > Analogix 7625 can be used in systems to switch the DP traffic between > two downstreams, which can be USB Type-C DisplayPort alternate mode > lane or regular DisplayPort output ports. > > Update the binding to accommodate this usage by introducing a > data-lanes and a mode-switch property on endpoints. > > Also include the link to the product brief in the bindings. > > Signed-off-by: Pin-yen Lin <treapking@chromium.org> > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > Reviewed-by: Chen-Yu Tsai <wenst@chromium.org> > Tested-by: Chen-Yu Tsai <wenst@chromium.org> > Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> > > --- > > Changes in v10: > - Collected Reviewed-by and Tested-by tags > > Changes in v9: > - Collected Reviewed-by tag > > Changes in v8: > - Updated anx7625 bindings for data-lane property > - Fixed the subject prefix > > Changes in v7: > - Fixed issues reported by dt_binding_check > - Updated the schema and the example dts for data-lanes. > - Changed to generic naming for the example dts node. > > Changes in v6: > - Remove switches node and use endpoints and data-lanes property to > describe the connections. > > .../display/bridge/analogix,anx7625.yaml | 99 ++++++++++++++++++- > 1 file changed, 96 insertions(+), 3 deletions(-) > > diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml > index 4590186c4a0b..b49a350c40e3 100644 > --- a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml > +++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml > @@ -12,7 +12,8 @@ maintainers: > > description: | > The ANX7625 is an ultra-low power 4K Mobile HD Transmitter > - designed for portable devices. > + designed for portable devices. Product brief is available at > + https://www.analogix.com/en/system/files/AA-002291-PB-6-ANX7625_ProductBrief.pdf > > properties: > compatible: > @@ -112,10 +113,48 @@ properties: > data-lanes: true > > port@1: > - $ref: /schemas/graph.yaml#/properties/port > + $ref: /schemas/graph.yaml#/$defs/port-base > description: > Video port for panel or connector. > > + patternProperties: > + "^endpoint@[01]$": > + $ref: /schemas/graph.yaml#/$defs/endpoint-base You are using a property from video-interfaces.yaml, so you need to reference that. Needs some description of what each endpoint is. IOW, how each endpoint corresponds to the h/w. > + unevaluatedProperties: false > + > + properties: > + reg: > + maxItems: 1 > + > + remote-endpoint: true > + > + data-lanes: > + oneOf: > + - items: > + - enum: [0, 1, 2, 3] > + > + - items: > + - const: 0 > + - const: 1 > + > + - items: > + - const: 2 > + - const: 3 > + > + - items: > + - const: 0 > + - const: 1 > + - const: 2 > + - const: 3 > + > + mode-switch: > + type: boolean > + description: Register this node as a Type-C mode switch or not. > + > + required: > + - reg > + - remote-endpoint > + > required: > - port@0 > - port@1 > @@ -164,8 +203,12 @@ examples: > }; > > mipi2dp_bridge_out: port@1 { > + #address-cells = <1>; > + #size-cells = <0>; > + > reg = <1>; > - anx7625_out: endpoint { > + anx7625_out: endpoint@0 { > + reg = <0>; > remote-endpoint = <&panel_in>; > }; > }; > @@ -186,3 +229,53 @@ examples: > }; > }; > }; > + - | > + i2c3 { > + #address-cells = <1>; > + #size-cells = <0>; > + > + encoder@58 { > + compatible = "analogix,anx7625"; > + reg = <0x58>; > + pinctrl-names = "default"; > + pinctrl-0 = <&anx7625_dp_pins>; > + enable-gpios = <&pio 176 GPIO_ACTIVE_HIGH>; > + reset-gpios = <&pio 177 GPIO_ACTIVE_HIGH>; > + vdd10-supply = <&pp1100_dpbrdg>; > + vdd18-supply = <&pp1800_dpbrdg_dx>; > + vdd33-supply = <&pp3300_dpbrdg_dx>; > + analogix,audio-enable; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + anx7625_dp_in: endpoint { > + bus-type = <7>; > + remote-endpoint = <&dpi_out>; > + }; > + }; > + > + port@1 { > + #address-cells = <1>; > + #size-cells = <0>; > + > + reg = <1>; > + anx_typec0: endpoint@0 { > + reg = <0>; > + mode-switch; > + data-lanes = <0 1>; > + remote-endpoint = <&typec_port0>; > + }; > + anx_typec1: endpoint@1 { > + reg = <1>; > + mode-switch; > + data-lanes = <2 3>; > + remote-endpoint = <&typec_port1>; > + }; > + }; > + }; > + }; > + }; > -- > 2.39.0.314.g84b9a713c41-goog >
diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml index 4590186c4a0b..b49a350c40e3 100644 --- a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml +++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml @@ -12,7 +12,8 @@ maintainers: description: | The ANX7625 is an ultra-low power 4K Mobile HD Transmitter - designed for portable devices. + designed for portable devices. Product brief is available at + https://www.analogix.com/en/system/files/AA-002291-PB-6-ANX7625_ProductBrief.pdf properties: compatible: @@ -112,10 +113,48 @@ properties: data-lanes: true port@1: - $ref: /schemas/graph.yaml#/properties/port + $ref: /schemas/graph.yaml#/$defs/port-base description: Video port for panel or connector. + patternProperties: + "^endpoint@[01]$": + $ref: /schemas/graph.yaml#/$defs/endpoint-base + unevaluatedProperties: false + + properties: + reg: + maxItems: 1 + + remote-endpoint: true + + data-lanes: + oneOf: + - items: + - enum: [0, 1, 2, 3] + + - items: + - const: 0 + - const: 1 + + - items: + - const: 2 + - const: 3 + + - items: + - const: 0 + - const: 1 + - const: 2 + - const: 3 + + mode-switch: + type: boolean + description: Register this node as a Type-C mode switch or not. + + required: + - reg + - remote-endpoint + required: - port@0 - port@1 @@ -164,8 +203,12 @@ examples: }; mipi2dp_bridge_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; - anx7625_out: endpoint { + anx7625_out: endpoint@0 { + reg = <0>; remote-endpoint = <&panel_in>; }; }; @@ -186,3 +229,53 @@ examples: }; }; }; + - | + i2c3 { + #address-cells = <1>; + #size-cells = <0>; + + encoder@58 { + compatible = "analogix,anx7625"; + reg = <0x58>; + pinctrl-names = "default"; + pinctrl-0 = <&anx7625_dp_pins>; + enable-gpios = <&pio 176 GPIO_ACTIVE_HIGH>; + reset-gpios = <&pio 177 GPIO_ACTIVE_HIGH>; + vdd10-supply = <&pp1100_dpbrdg>; + vdd18-supply = <&pp1800_dpbrdg_dx>; + vdd33-supply = <&pp3300_dpbrdg_dx>; + analogix,audio-enable; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + anx7625_dp_in: endpoint { + bus-type = <7>; + remote-endpoint = <&dpi_out>; + }; + }; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + anx_typec0: endpoint@0 { + reg = <0>; + mode-switch; + data-lanes = <0 1>; + remote-endpoint = <&typec_port0>; + }; + anx_typec1: endpoint@1 { + reg = <1>; + mode-switch; + data-lanes = <2 3>; + remote-endpoint = <&typec_port1>; + }; + }; + }; + }; + };