new file mode 100644
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/backlight/kinetic,ktz8866.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Kinetic Technologies KTZ8866 backlight
+
+maintainers:
+ - Jianhua Lu <lujianhua000@gmail.com>
+
+description: |
+ The Kinetic Technologies KTZ8866 is a high efficiency 6-channels-current-sinks
+ led backlight with dual lcd bias power.
+ https://www.kinet-ic.com/ktz8866/
+
+allOf:
+ - $ref: common.yaml#
+
+properties:
+ compatible:
+ const: kinetic,ktz8866
+
+ vddpos-supply:
+ description: positive boost supply regulator.
+
+ vddneg-supply:
+ description: negative boost supply regulator.
+
+ enable-gpios:
+ description: GPIO to use to enable/disable the backlight (HWEN pin).
+ maxItems: 1
+
+ current-num-sinks:
+ description: number of the LED current sinks' channels.
+ enum: [1, 2, 3, 4, 5, 6]
+
+ kinetic,current-ramp-delay-ms:
+ description: LED current ramping delay time in milliseconds.
+ enum: [2, 4, 8, 16, 32, 64, 128, 192, 256, 320, 384, 448, 512, 576, 640]
+
+ kinetic,led-enable-ramp-delay-ms:
+ description: |
+ LED on/off ramping delay time in milliseconds, note that the case 0 will be
+ mapped to 512μs because ktz8866 can't ramp faster than it.
+ enum: [0, 1, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048, 4096, 8192, 16384]
+
+ kinetic,enable-lcd-bias:
+ description: Set if we want to output bias power supply for LCD.
+ type: boolean
+
+required:
+ - compatible
+ - vddpos-supply
+ - vddneg-supply
+ - enable-gpios
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ backlight {
+ compatible = "kinetic,ktz8866";
+
+ vddpos-supply = <&bl_vddpos_5p5>;
+ vddneg-supply = <&bl_vddneg_5p5>;
+ enable-gpios = <&tlmm 139 GPIO_ACTIVE_HIGH>;
+ current-num-sinks = <5>;
+ kinetic,current-ramp-delay-ms = <128>;
+ kinetic,led-enable-ramp-delay-ms = <1>;
+ kinetic,enable-lcd-bias;
+ };
Add Kinetic KTZ8866 backlight binding documentation. Signed-off-by: Jianhua Lu <lujianhua000@gmail.com> --- Changes in v2: - Remove "items" between "compatible" and "const: kinetic,ktz8866". - Change "additionalProperties" to "unevaluatedProperties". Changes in v3: - Add Krzysztof's R-b. Changes in v4: - Drop Krzysztof's R-b. - Add some new properties. Changes in v5: - Add missing enum under property description. - Rename uncorrect properties. Changes in v6: - Correct wrong property suffix and description. Changes in v7: - Add vddpos and vddeg supply. - Use enable-gpios instead of defining enable pin. Changes in v8: - Rename current ramping time. - Rename led ramping time. .../leds/backlight/kinetic,ktz8866.yaml | 74 +++++++++++++++++++ 1 file changed, 74 insertions(+) create mode 100644 Documentation/devicetree/bindings/leds/backlight/kinetic,ktz8866.yaml