Message ID | 20230126184744.921758-2-l.stach@pengutronix.de (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | [1/2] gpu: ipu-v3: pre: move state into struct | expand |
On Thu, Jan 26, 2023 at 07:47:44PM +0100, Lucas Stach wrote: > imx-drm doesn't mandate a modeset when the framebuffer modifier changes, > but currently the tile prefetch and resolve (TPR) configuration of the > PRE is only set up on the initial modeset. > > As the TPR configuration is double buffered, same as all the other PRE > states, we can support dynamic reconfiguration of the buffer layout from > one frame to another. As switching between (super-)tiled and linear > prefetch needs to touch the CTRL register make sure to do the > reconfiguration inside the safe window. > > Signed-off-by: Lucas Stach <l.stach@pengutronix.de> > --- > drivers/gpu/ipu-v3/ipu-pre.c | 59 +++++++++++++++++++++++++++++------- > drivers/gpu/ipu-v3/ipu-prg.c | 2 +- > drivers/gpu/ipu-v3/ipu-prv.h | 2 +- > 3 files changed, 50 insertions(+), 13 deletions(-) > > diff --git a/drivers/gpu/ipu-v3/ipu-pre.c b/drivers/gpu/ipu-v3/ipu-pre.c > index befffc85a146..e8d9792827dd 100644 > --- a/drivers/gpu/ipu-v3/ipu-pre.c > +++ b/drivers/gpu/ipu-v3/ipu-pre.c > @@ -99,8 +99,12 @@ struct ipu_pre { > > struct { > bool in_use; > + uint64_t modifier; > + unsigned int height; > unsigned int safe_window_end; > unsigned int bufaddr; > + u32 ctrl; > + u8 cpp; > } cur; > }; > > @@ -173,6 +177,11 @@ void ipu_pre_configure(struct ipu_pre *pre, unsigned int width, > u32 active_bpp = info->cpp[0] >> 1; > u32 val; > > + pre->cur.bufaddr = bufaddr; > + pre->cur.height = height; > + pre->cur.modifier = modifier; > + pre->cur.cpp = info->cpp[0]; > + > /* calculate safe window for ctrl register updates */ > if (modifier == DRM_FORMAT_MOD_LINEAR) > pre->cur.safe_window_end = height - 2; > @@ -181,7 +190,6 @@ void ipu_pre_configure(struct ipu_pre *pre, unsigned int width, > > writel(bufaddr, pre->regs + IPU_PRE_CUR_BUF); > writel(bufaddr, pre->regs + IPU_PRE_NEXT_BUF); > - pre->cur.bufaddr = bufaddr; > > val = IPU_PRE_PREF_ENG_CTRL_INPUT_PIXEL_FORMAT(0) | > IPU_PRE_PREF_ENG_CTRL_INPUT_ACTIVE_BPP(active_bpp) | > @@ -223,28 +231,56 @@ void ipu_pre_configure(struct ipu_pre *pre, unsigned int width, > } > writel(val, pre->regs + IPU_PRE_TPR_CTRL); > > - val = readl(pre->regs + IPU_PRE_CTRL); > - val |= IPU_PRE_CTRL_EN_REPEAT | IPU_PRE_CTRL_ENABLE | > - IPU_PRE_CTRL_SDW_UPDATE; > + pre->cur.ctrl = readl(pre->regs + IPU_PRE_CTRL); > + pre->cur.ctrl |= IPU_PRE_CTRL_EN_REPEAT | IPU_PRE_CTRL_ENABLE; > if (modifier == DRM_FORMAT_MOD_LINEAR) > - val &= ~IPU_PRE_CTRL_BLOCK_EN; > + pre->cur.ctrl &= ~IPU_PRE_CTRL_BLOCK_EN; > else > - val |= IPU_PRE_CTRL_BLOCK_EN; > - writel(val, pre->regs + IPU_PRE_CTRL); > + pre->cur.ctrl |= IPU_PRE_CTRL_BLOCK_EN; > + writel(pre->cur.ctrl | IPU_PRE_CTRL_SDW_UPDATE, > + pre->regs + IPU_PRE_CTRL); > } > > -void ipu_pre_update(struct ipu_pre *pre, unsigned int bufaddr) > +void ipu_pre_update(struct ipu_pre *pre, uint64_t modifier, unsigned int bufaddr) > { > unsigned long timeout = jiffies + msecs_to_jiffies(5); > unsigned short current_yblock; > + unsigned int safe_window_end = pre->cur.safe_window_end; > u32 val; > > - if (bufaddr == pre->cur.bufaddr) > + if (bufaddr == pre->cur.bufaddr && > + modifier == pre->cur.modifier) > return; > > writel(bufaddr, pre->regs + IPU_PRE_NEXT_BUF); > pre->cur.bufaddr = bufaddr; > > + if (modifier != pre->cur.modifier) { > + val = readl(pre->regs + IPU_PRE_TPR_CTRL); > + val &= ~IPU_PRE_TPR_CTRL_TILE_FORMAT_MASK; > + if (modifier != DRM_FORMAT_MOD_LINEAR) { > + /* only support single buffer formats for now */ > + val |= IPU_PRE_TPR_CTRL_TILE_FORMAT_SINGLE_BUF; > + if (modifier == DRM_FORMAT_MOD_VIVANTE_SUPER_TILED) > + val |= IPU_PRE_TPR_CTRL_TILE_FORMAT_SUPER_TILED; > + if (pre->cur.cpp == 2) > + val |= IPU_PRE_TPR_CTRL_TILE_FORMAT_16_BIT; > + } > + writel(val, pre->regs + IPU_PRE_TPR_CTRL); > + > + if (modifier == DRM_FORMAT_MOD_LINEAR) > + pre->cur.ctrl &= ~IPU_PRE_CTRL_BLOCK_EN; > + else > + pre->cur.ctrl |= IPU_PRE_CTRL_BLOCK_EN; > + > + if (modifier == DRM_FORMAT_MOD_LINEAR) > + pre->cur.safe_window_end = pre->cur.height - 2; > + else > + pre->cur.safe_window_end = DIV_ROUND_UP(pre->cur.height, 4) - 1; Could you extract the same code from ipu_pre_configure() into a separate function, say ipu_pre_configure_modifier(), instead, and call that from both places? regards Philipp
diff --git a/drivers/gpu/ipu-v3/ipu-pre.c b/drivers/gpu/ipu-v3/ipu-pre.c index befffc85a146..e8d9792827dd 100644 --- a/drivers/gpu/ipu-v3/ipu-pre.c +++ b/drivers/gpu/ipu-v3/ipu-pre.c @@ -99,8 +99,12 @@ struct ipu_pre { struct { bool in_use; + uint64_t modifier; + unsigned int height; unsigned int safe_window_end; unsigned int bufaddr; + u32 ctrl; + u8 cpp; } cur; }; @@ -173,6 +177,11 @@ void ipu_pre_configure(struct ipu_pre *pre, unsigned int width, u32 active_bpp = info->cpp[0] >> 1; u32 val; + pre->cur.bufaddr = bufaddr; + pre->cur.height = height; + pre->cur.modifier = modifier; + pre->cur.cpp = info->cpp[0]; + /* calculate safe window for ctrl register updates */ if (modifier == DRM_FORMAT_MOD_LINEAR) pre->cur.safe_window_end = height - 2; @@ -181,7 +190,6 @@ void ipu_pre_configure(struct ipu_pre *pre, unsigned int width, writel(bufaddr, pre->regs + IPU_PRE_CUR_BUF); writel(bufaddr, pre->regs + IPU_PRE_NEXT_BUF); - pre->cur.bufaddr = bufaddr; val = IPU_PRE_PREF_ENG_CTRL_INPUT_PIXEL_FORMAT(0) | IPU_PRE_PREF_ENG_CTRL_INPUT_ACTIVE_BPP(active_bpp) | @@ -223,28 +231,56 @@ void ipu_pre_configure(struct ipu_pre *pre, unsigned int width, } writel(val, pre->regs + IPU_PRE_TPR_CTRL); - val = readl(pre->regs + IPU_PRE_CTRL); - val |= IPU_PRE_CTRL_EN_REPEAT | IPU_PRE_CTRL_ENABLE | - IPU_PRE_CTRL_SDW_UPDATE; + pre->cur.ctrl = readl(pre->regs + IPU_PRE_CTRL); + pre->cur.ctrl |= IPU_PRE_CTRL_EN_REPEAT | IPU_PRE_CTRL_ENABLE; if (modifier == DRM_FORMAT_MOD_LINEAR) - val &= ~IPU_PRE_CTRL_BLOCK_EN; + pre->cur.ctrl &= ~IPU_PRE_CTRL_BLOCK_EN; else - val |= IPU_PRE_CTRL_BLOCK_EN; - writel(val, pre->regs + IPU_PRE_CTRL); + pre->cur.ctrl |= IPU_PRE_CTRL_BLOCK_EN; + writel(pre->cur.ctrl | IPU_PRE_CTRL_SDW_UPDATE, + pre->regs + IPU_PRE_CTRL); } -void ipu_pre_update(struct ipu_pre *pre, unsigned int bufaddr) +void ipu_pre_update(struct ipu_pre *pre, uint64_t modifier, unsigned int bufaddr) { unsigned long timeout = jiffies + msecs_to_jiffies(5); unsigned short current_yblock; + unsigned int safe_window_end = pre->cur.safe_window_end; u32 val; - if (bufaddr == pre->cur.bufaddr) + if (bufaddr == pre->cur.bufaddr && + modifier == pre->cur.modifier) return; writel(bufaddr, pre->regs + IPU_PRE_NEXT_BUF); pre->cur.bufaddr = bufaddr; + if (modifier != pre->cur.modifier) { + val = readl(pre->regs + IPU_PRE_TPR_CTRL); + val &= ~IPU_PRE_TPR_CTRL_TILE_FORMAT_MASK; + if (modifier != DRM_FORMAT_MOD_LINEAR) { + /* only support single buffer formats for now */ + val |= IPU_PRE_TPR_CTRL_TILE_FORMAT_SINGLE_BUF; + if (modifier == DRM_FORMAT_MOD_VIVANTE_SUPER_TILED) + val |= IPU_PRE_TPR_CTRL_TILE_FORMAT_SUPER_TILED; + if (pre->cur.cpp == 2) + val |= IPU_PRE_TPR_CTRL_TILE_FORMAT_16_BIT; + } + writel(val, pre->regs + IPU_PRE_TPR_CTRL); + + if (modifier == DRM_FORMAT_MOD_LINEAR) + pre->cur.ctrl &= ~IPU_PRE_CTRL_BLOCK_EN; + else + pre->cur.ctrl |= IPU_PRE_CTRL_BLOCK_EN; + + if (modifier == DRM_FORMAT_MOD_LINEAR) + pre->cur.safe_window_end = pre->cur.height - 2; + else + pre->cur.safe_window_end = DIV_ROUND_UP(pre->cur.height, 4) - 1; + + pre->cur.modifier = modifier; + } + do { if (time_after(jiffies, timeout)) { dev_warn(pre->dev, "timeout waiting for PRE safe window\n"); @@ -255,9 +291,10 @@ void ipu_pre_update(struct ipu_pre *pre, unsigned int bufaddr) current_yblock = (val >> IPU_PRE_STORE_ENG_STATUS_STORE_BLOCK_Y_SHIFT) & IPU_PRE_STORE_ENG_STATUS_STORE_BLOCK_Y_MASK; - } while (current_yblock == 0 || current_yblock >= pre->cur.safe_window_end); + } while (current_yblock == 0 || current_yblock >= safe_window_end); - writel(IPU_PRE_CTRL_SDW_UPDATE, pre->regs + IPU_PRE_CTRL_SET); + writel(pre->cur.ctrl | IPU_PRE_CTRL_SDW_UPDATE, + pre->regs + IPU_PRE_CTRL); } bool ipu_pre_update_pending(struct ipu_pre *pre) diff --git a/drivers/gpu/ipu-v3/ipu-prg.c b/drivers/gpu/ipu-v3/ipu-prg.c index 196797c1b4b3..eb8cfcd9f5b4 100644 --- a/drivers/gpu/ipu-v3/ipu-prg.c +++ b/drivers/gpu/ipu-v3/ipu-prg.c @@ -287,7 +287,7 @@ int ipu_prg_channel_configure(struct ipuv3_channel *ipu_chan, chan = &prg->chan[prg_chan]; if (chan->enabled) { - ipu_pre_update(prg->pres[chan->used_pre], *eba); + ipu_pre_update(prg->pres[chan->used_pre], modifier, *eba); return 0; } diff --git a/drivers/gpu/ipu-v3/ipu-prv.h b/drivers/gpu/ipu-v3/ipu-prv.h index 291ac1bab66d..24f05ff3c047 100644 --- a/drivers/gpu/ipu-v3/ipu-prv.h +++ b/drivers/gpu/ipu-v3/ipu-prv.h @@ -262,7 +262,7 @@ u32 ipu_pre_get_baddr(struct ipu_pre *pre); void ipu_pre_configure(struct ipu_pre *pre, unsigned int width, unsigned int height, unsigned int stride, u32 format, uint64_t modifier, unsigned int bufaddr); -void ipu_pre_update(struct ipu_pre *pre, unsigned int bufaddr); +void ipu_pre_update(struct ipu_pre *pre, uint64_t modifier, unsigned int bufaddr); bool ipu_pre_update_pending(struct ipu_pre *pre); struct ipu_prg *ipu_prg_lookup_by_phandle(struct device *dev, const char *name,
imx-drm doesn't mandate a modeset when the framebuffer modifier changes, but currently the tile prefetch and resolve (TPR) configuration of the PRE is only set up on the initial modeset. As the TPR configuration is double buffered, same as all the other PRE states, we can support dynamic reconfiguration of the buffer layout from one frame to another. As switching between (super-)tiled and linear prefetch needs to touch the CTRL register make sure to do the reconfiguration inside the safe window. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> --- drivers/gpu/ipu-v3/ipu-pre.c | 59 +++++++++++++++++++++++++++++------- drivers/gpu/ipu-v3/ipu-prg.c | 2 +- drivers/gpu/ipu-v3/ipu-prv.h | 2 +- 3 files changed, 50 insertions(+), 13 deletions(-)