| Message ID | 20230228215433.3944508-1-robh@kernel.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | dt-bindings: Fix SPI and I2C bus node names in examples | expand |
On Tue, Feb 28, 2023 at 03:54:33PM -0600, Rob Herring wrote: > SPI and I2C bus node names are expected to be "spi" or "i2c", > respectively, with nothing else, a unit-address, or a '-N' index. A > pattern of 'spi0' or 'i2c0' or similar has crept in. Fix all these > cases. Mostly scripted with the following commands: Acked-by: Mark Brown <broonie@kernel.org>
4:33PM -0600, Rob Herring wrote: > SPI and I2C bus node names are expected to be "spi" or "i2c", > respectively, with nothing else, a unit-address, or a '-N' index. A > pattern of 'spi0' or 'i2c0' or similar has crept in. Fix all these > cases. Mostly scripted with the following commands: > > git grep -l '\si2c[0-9] {' Documentation/devicetree/ | xargs sed -i -e 's/i2c[0-9] {/i2c {/' > git grep -l '\sspi[0-9] {' Documentation/devicetree/ | xargs sed -i -e 's/spi[0-9] {/spi {/' > > With this, a few errors in examples were exposed and fixed. > > Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Wolfram Sang <wsa@kernel.org>
On 28.02.2023 15:54:33, Rob Herring wrote: > SPI and I2C bus node names are expected to be "spi" or "i2c", > respectively, with nothing else, a unit-address, or a '-N' index. A > pattern of 'spi0' or 'i2c0' or similar has crept in. Fix all these > cases. Mostly scripted with the following commands: > > git grep -l '\si2c[0-9] {' Documentation/devicetree/ | xargs sed -i -e 's/i2c[0-9] {/i2c {/' > git grep -l '\sspi[0-9] {' Documentation/devicetree/ | xargs sed -i -e 's/spi[0-9] {/spi {/' > > With this, a few errors in examples were exposed and fixed. > > Signed-off-by: Rob Herring <robh@kernel.org> > --- > Cc: Miguel Ojeda <ojeda@kernel.org> > Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org> > Cc: Benson Leung <bleung@chromium.org> > Cc: Guenter Roeck <groeck@chromium.org> > Cc: Stephen Boyd <sboyd@kernel.org> > Cc: Andrzej Hajda <andrzej.hajda@intel.com> > Cc: Neil Armstrong <neil.armstrong@linaro.org> > Cc: Robert Foss <rfoss@kernel.org> > Cc: Thierry Reding <thierry.reding@gmail.com> > Cc: Sam Ravnborg <sam@ravnborg.org> > Cc: MyungJoo Ham <myungjoo.ham@samsung.com> > Cc: Chanwoo Choi <cw00.choi@samsung.com> > Cc: Linus Walleij <linus.walleij@linaro.org> > Cc: Bartosz Golaszewski <brgl@bgdev.pl> > Cc: Pavel Machek <pavel@ucw.cz> > Cc: Lee Jones <lee@kernel.org> > Cc: Mauro Carvalho Chehab <mchehab@kernel.org> > Cc: "David S. Miller" <davem@davemloft.net> > Cc: Eric Dumazet <edumazet@google.com> > Cc: Jakub Kicinski <kuba@kernel.org> > Cc: Paolo Abeni <pabeni@redhat.com> > Cc: Wolfgang Grandegger <wg@grandegger.com> > Cc: Kalle Valo <kvalo@kernel.org> > Cc: Sebastian Reichel <sre@kernel.org> > Cc: Mark Brown <broonie@kernel.org> > Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> > Cc: linux-clk@vger.kernel.org > Cc: dri-devel@lists.freedesktop.org > Cc: linux-gpio@vger.kernel.org > Cc: linux-i2c@vger.kernel.org > Cc: linux-leds@vger.kernel.org > Cc: linux-media@vger.kernel.org > Cc: netdev@vger.kernel.org > Cc: linux-can@vger.kernel.org > Cc: linux-wireless@vger.kernel.org > Cc: linux-pm@vger.kernel.org > Cc: alsa-devel@alsa-project.org > Cc: linux-usb@vger.kernel.org > --- > .../bindings/net/can/microchip,mcp251xfd.yaml | 2 +- Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for the microchip,mcp251xfd.yaml
On Tue, 28 Feb 2023, Rob Herring wrote: > SPI and I2C bus node names are expected to be "spi" or "i2c", > respectively, with nothing else, a unit-address, or a '-N' index. A > pattern of 'spi0' or 'i2c0' or similar has crept in. Fix all these > cases. Mostly scripted with the following commands: > > git grep -l '\si2c[0-9] {' Documentation/devicetree/ | xargs sed -i -e 's/i2c[0-9] {/i2c {/' > git grep -l '\sspi[0-9] {' Documentation/devicetree/ | xargs sed -i -e 's/spi[0-9] {/spi {/' > > With this, a few errors in examples were exposed and fixed. > > Signed-off-by: Rob Herring <robh@kernel.org> > --- > Cc: Miguel Ojeda <ojeda@kernel.org> > Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org> > Cc: Benson Leung <bleung@chromium.org> > Cc: Guenter Roeck <groeck@chromium.org> > Cc: Stephen Boyd <sboyd@kernel.org> > Cc: Andrzej Hajda <andrzej.hajda@intel.com> > Cc: Neil Armstrong <neil.armstrong@linaro.org> > Cc: Robert Foss <rfoss@kernel.org> > Cc: Thierry Reding <thierry.reding@gmail.com> > Cc: Sam Ravnborg <sam@ravnborg.org> > Cc: MyungJoo Ham <myungjoo.ham@samsung.com> > Cc: Chanwoo Choi <cw00.choi@samsung.com> > Cc: Linus Walleij <linus.walleij@linaro.org> > Cc: Bartosz Golaszewski <brgl@bgdev.pl> > Cc: Pavel Machek <pavel@ucw.cz> > Cc: Lee Jones <lee@kernel.org> > Cc: Mauro Carvalho Chehab <mchehab@kernel.org> > Cc: "David S. Miller" <davem@davemloft.net> > Cc: Eric Dumazet <edumazet@google.com> > Cc: Jakub Kicinski <kuba@kernel.org> > Cc: Paolo Abeni <pabeni@redhat.com> > Cc: Wolfgang Grandegger <wg@grandegger.com> > Cc: Kalle Valo <kvalo@kernel.org> > Cc: Sebastian Reichel <sre@kernel.org> > Cc: Mark Brown <broonie@kernel.org> > Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> > Cc: linux-clk@vger.kernel.org > Cc: dri-devel@lists.freedesktop.org > Cc: linux-gpio@vger.kernel.org > Cc: linux-i2c@vger.kernel.org > Cc: linux-leds@vger.kernel.org > Cc: linux-media@vger.kernel.org > Cc: netdev@vger.kernel.org > Cc: linux-can@vger.kernel.org > Cc: linux-wireless@vger.kernel.org > Cc: linux-pm@vger.kernel.org > Cc: alsa-devel@alsa-project.org > Cc: linux-usb@vger.kernel.org > --- > .../bindings/auxdisplay/holtek,ht16k33.yaml | 2 +- > .../bindings/chrome/google,cros-ec-typec.yaml | 2 +- > .../chrome/google,cros-kbd-led-backlight.yaml | 2 +- > .../devicetree/bindings/clock/ti,lmk04832.yaml | 2 +- > .../bindings/display/bridge/analogix,anx7625.yaml | 2 +- > .../bindings/display/bridge/anx6345.yaml | 2 +- > .../bindings/display/bridge/lontium,lt8912b.yaml | 2 +- > .../bindings/display/bridge/nxp,ptn3460.yaml | 2 +- > .../bindings/display/bridge/ps8640.yaml | 2 +- > .../bindings/display/bridge/sil,sii9234.yaml | 2 +- > .../bindings/display/bridge/ti,dlpc3433.yaml | 2 +- > .../bindings/display/bridge/toshiba,tc358762.yaml | 2 +- > .../bindings/display/bridge/toshiba,tc358768.yaml | 2 +- > .../bindings/display/panel/nec,nl8048hl11.yaml | 2 +- > .../bindings/display/solomon,ssd1307fb.yaml | 4 ++-- > .../devicetree/bindings/eeprom/at25.yaml | 2 +- > .../bindings/extcon/extcon-usbc-cros-ec.yaml | 2 +- > .../bindings/extcon/extcon-usbc-tusb320.yaml | 2 +- > .../devicetree/bindings/gpio/gpio-pca9570.yaml | 2 +- > .../devicetree/bindings/gpio/gpio-pca95xx.yaml | 8 ++++---- > .../bindings/i2c/google,cros-ec-i2c-tunnel.yaml | 2 +- > .../bindings/leds/cznic,turris-omnia-leds.yaml | 2 +- [...] > .../devicetree/bindings/leds/issi,is31fl319x.yaml | 2 +- > .../devicetree/bindings/leds/leds-aw2013.yaml | 2 +- > .../devicetree/bindings/leds/leds-rt4505.yaml | 2 +- > .../devicetree/bindings/leds/ti,tca6507.yaml | 2 +- Acked-by: Lee Jones <lee@kernel.org> > .../devicetree/bindings/mfd/actions,atc260x.yaml | 2 +- > .../devicetree/bindings/mfd/google,cros-ec.yaml | 6 +++--- > .../devicetree/bindings/mfd/ti,tps65086.yaml | 2 +- > .../devicetree/bindings/mfd/x-powers,axp152.yaml | 4 ++-- > .../devicetree/bindings/net/asix,ax88796c.yaml | 2 +- Acked-by: Lee Jones <lee@kernel.org> [...]
On Tue, 28 Feb 2023 at 14:54, Rob Herring <robh@kernel.org> wrote: > > SPI and I2C bus node names are expected to be "spi" or "i2c", > respectively, with nothing else, a unit-address, or a '-N' index. A > pattern of 'spi0' or 'i2c0' or similar has crept in. Fix all these > cases. Mostly scripted with the following commands: > > git grep -l '\si2c[0-9] {' Documentation/devicetree/ | xargs sed -i -e 's/i2c[0-9] {/i2c {/' > git grep -l '\sspi[0-9] {' Documentation/devicetree/ | xargs sed -i -e 's/spi[0-9] {/spi {/' > > With this, a few errors in examples were exposed and fixed. > > Signed-off-by: Rob Herring <robh@kernel.org> > --- > Cc: Miguel Ojeda <ojeda@kernel.org> > Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org> > Cc: Benson Leung <bleung@chromium.org> > Cc: Guenter Roeck <groeck@chromium.org> > Cc: Stephen Boyd <sboyd@kernel.org> > Cc: Andrzej Hajda <andrzej.hajda@intel.com> > Cc: Neil Armstrong <neil.armstrong@linaro.org> > Cc: Robert Foss <rfoss@kernel.org> > Cc: Thierry Reding <thierry.reding@gmail.com> > Cc: Sam Ravnborg <sam@ravnborg.org> > Cc: MyungJoo Ham <myungjoo.ham@samsung.com> > Cc: Chanwoo Choi <cw00.choi@samsung.com> > Cc: Linus Walleij <linus.walleij@linaro.org> > Cc: Bartosz Golaszewski <brgl@bgdev.pl> > Cc: Pavel Machek <pavel@ucw.cz> > Cc: Lee Jones <lee@kernel.org> > Cc: Mauro Carvalho Chehab <mchehab@kernel.org> > Cc: "David S. Miller" <davem@davemloft.net> > Cc: Eric Dumazet <edumazet@google.com> > Cc: Jakub Kicinski <kuba@kernel.org> > Cc: Paolo Abeni <pabeni@redhat.com> > Cc: Wolfgang Grandegger <wg@grandegger.com> > Cc: Kalle Valo <kvalo@kernel.org> > Cc: Sebastian Reichel <sre@kernel.org> > Cc: Mark Brown <broonie@kernel.org> > Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> > Cc: linux-clk@vger.kernel.org > Cc: dri-devel@lists.freedesktop.org > Cc: linux-gpio@vger.kernel.org > Cc: linux-i2c@vger.kernel.org > Cc: linux-leds@vger.kernel.org > Cc: linux-media@vger.kernel.org > Cc: netdev@vger.kernel.org > Cc: linux-can@vger.kernel.org > Cc: linux-wireless@vger.kernel.org > Cc: linux-pm@vger.kernel.org > Cc: alsa-devel@alsa-project.org > Cc: linux-usb@vger.kernel.org > --- Reviewed-by: Simon Glass <sjg@chromium.org>
Quoting Rob Herring (2023-02-28 13:54:33) > SPI and I2C bus node names are expected to be "spi" or "i2c", > respectively, with nothing else, a unit-address, or a '-N' index. A > pattern of 'spi0' or 'i2c0' or similar has crept in. Fix all these > cases. Mostly scripted with the following commands: > > git grep -l '\si2c[0-9] {' Documentation/devicetree/ | xargs sed -i -e 's/i2c[0-9] {/i2c {/' > git grep -l '\sspi[0-9] {' Documentation/devicetree/ | xargs sed -i -e 's/spi[0-9] {/spi {/' > > With this, a few errors in examples were exposed and fixed. > > Signed-off-by: Rob Herring <robh@kernel.org> > --- Reviewed-by: Stephen Boyd <sboyd@kernel.org> > diff --git a/Documentation/devicetree/bindings/clock/ti,lmk04832.yaml b/Documentation/devicetree/bindings/clock/ti,lmk04832.yaml > index 73d17830f165..13d7b3d03d84 100644 > --- a/Documentation/devicetree/bindings/clock/ti,lmk04832.yaml > +++ b/Documentation/devicetree/bindings/clock/ti,lmk04832.yaml > @@ -160,7 +160,7 @@ examples: > }; > }; > > - spi0 { > + spi { > #address-cells = <1>; > #size-cells = <0>; >
Hi, On Tue, Feb 28, 2023 at 03:54:33PM -0600, Rob Herring wrote: > SPI and I2C bus node names are expected to be "spi" or "i2c", > respectively, with nothing else, a unit-address, or a '-N' index. A > pattern of 'spi0' or 'i2c0' or similar has crept in. Fix all these > cases. Mostly scripted with the following commands: > > git grep -l '\si2c[0-9] {' Documentation/devicetree/ | xargs sed -i -e 's/i2c[0-9] {/i2c {/' > git grep -l '\sspi[0-9] {' Documentation/devicetree/ | xargs sed -i -e 's/spi[0-9] {/spi {/' > > With this, a few errors in examples were exposed and fixed. > > Signed-off-by: Rob Herring <robh@kernel.org> > --- Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for power-supply -- Sebastian ... > .../devicetree/bindings/power/supply/bq2415x.yaml | 2 +- > .../devicetree/bindings/power/supply/bq24190.yaml | 2 +- > .../devicetree/bindings/power/supply/bq24257.yaml | 4 ++-- > .../devicetree/bindings/power/supply/bq24735.yaml | 2 +- > .../devicetree/bindings/power/supply/bq2515x.yaml | 2 +- > .../devicetree/bindings/power/supply/bq25890.yaml | 2 +- > .../devicetree/bindings/power/supply/bq25980.yaml | 2 +- > .../devicetree/bindings/power/supply/bq27xxx.yaml | 15 ++++++++------- > .../bindings/power/supply/lltc,ltc294x.yaml | 2 +- > .../bindings/power/supply/ltc4162-l.yaml | 2 +- > .../bindings/power/supply/maxim,max14656.yaml | 2 +- > .../bindings/power/supply/maxim,max17040.yaml | 4 ++-- > .../bindings/power/supply/maxim,max17042.yaml | 2 +- > .../bindings/power/supply/richtek,rt9455.yaml | 2 +- > .../bindings/power/supply/ti,lp8727.yaml | 2 +- ... > diff --git a/Documentation/devicetree/bindings/power/supply/bq2415x.yaml b/Documentation/devicetree/bindings/power/supply/bq2415x.yaml > index f7287ffd4b12..13822346e708 100644 > --- a/Documentation/devicetree/bindings/power/supply/bq2415x.yaml > +++ b/Documentation/devicetree/bindings/power/supply/bq2415x.yaml > @@ -77,7 +77,7 @@ additionalProperties: false > > examples: > - | > - i2c0 { > + i2c { > #address-cells = <1>; > #size-cells = <0>; > > diff --git a/Documentation/devicetree/bindings/power/supply/bq24190.yaml b/Documentation/devicetree/bindings/power/supply/bq24190.yaml > index 001c0ffb408d..d3ebc9de8c0b 100644 > --- a/Documentation/devicetree/bindings/power/supply/bq24190.yaml > +++ b/Documentation/devicetree/bindings/power/supply/bq24190.yaml > @@ -75,7 +75,7 @@ examples: > charge-term-current-microamp = <128000>; > }; > > - i2c0 { > + i2c { > #address-cells = <1>; > #size-cells = <0>; > > diff --git a/Documentation/devicetree/bindings/power/supply/bq24257.yaml b/Documentation/devicetree/bindings/power/supply/bq24257.yaml > index cc45939d385b..eb064bbf876c 100644 > --- a/Documentation/devicetree/bindings/power/supply/bq24257.yaml > +++ b/Documentation/devicetree/bindings/power/supply/bq24257.yaml > @@ -84,7 +84,7 @@ examples: > - | > #include <dt-bindings/gpio/gpio.h> > #include <dt-bindings/interrupt-controller/irq.h> > - i2c0 { > + i2c { > #address-cells = <1>; > #size-cells = <0>; > > @@ -104,7 +104,7 @@ examples: > - | > #include <dt-bindings/gpio/gpio.h> > #include <dt-bindings/interrupt-controller/irq.h> > - i2c0 { > + i2c { > #address-cells = <1>; > #size-cells = <0>; > > diff --git a/Documentation/devicetree/bindings/power/supply/bq24735.yaml b/Documentation/devicetree/bindings/power/supply/bq24735.yaml > index 388ee16f8a1e..af41e7ccd784 100644 > --- a/Documentation/devicetree/bindings/power/supply/bq24735.yaml > +++ b/Documentation/devicetree/bindings/power/supply/bq24735.yaml > @@ -77,7 +77,7 @@ examples: > - | > #include <dt-bindings/gpio/gpio.h> > > - i2c0 { > + i2c { > #address-cells = <1>; > #size-cells = <0>; > > diff --git a/Documentation/devicetree/bindings/power/supply/bq2515x.yaml b/Documentation/devicetree/bindings/power/supply/bq2515x.yaml > index 1a1b240034ef..845822c87f2a 100644 > --- a/Documentation/devicetree/bindings/power/supply/bq2515x.yaml > +++ b/Documentation/devicetree/bindings/power/supply/bq2515x.yaml > @@ -73,7 +73,7 @@ examples: > constant-charge-voltage-max-microvolt = <4000000>; > }; > #include <dt-bindings/gpio/gpio.h> > - i2c0 { > + i2c { > #address-cells = <1>; > #size-cells = <0>; > > diff --git a/Documentation/devicetree/bindings/power/supply/bq25890.yaml b/Documentation/devicetree/bindings/power/supply/bq25890.yaml > index dae27e93af09..0ad302ab2bcc 100644 > --- a/Documentation/devicetree/bindings/power/supply/bq25890.yaml > +++ b/Documentation/devicetree/bindings/power/supply/bq25890.yaml > @@ -102,7 +102,7 @@ unevaluatedProperties: false > examples: > - | > #include <dt-bindings/interrupt-controller/irq.h> > - i2c0 { > + i2c { > #address-cells = <1>; > #size-cells = <0>; > > diff --git a/Documentation/devicetree/bindings/power/supply/bq25980.yaml b/Documentation/devicetree/bindings/power/supply/bq25980.yaml > index b687b8bcd705..b70ce8d7f86c 100644 > --- a/Documentation/devicetree/bindings/power/supply/bq25980.yaml > +++ b/Documentation/devicetree/bindings/power/supply/bq25980.yaml > @@ -95,7 +95,7 @@ examples: > }; > #include <dt-bindings/gpio/gpio.h> > #include <dt-bindings/interrupt-controller/irq.h> > - i2c0 { > + i2c { > #address-cells = <1>; > #size-cells = <0>; > > diff --git a/Documentation/devicetree/bindings/power/supply/bq27xxx.yaml b/Documentation/devicetree/bindings/power/supply/bq27xxx.yaml > index 347d4433adc5..309ea33b5b25 100644 > --- a/Documentation/devicetree/bindings/power/supply/bq27xxx.yaml > +++ b/Documentation/devicetree/bindings/power/supply/bq27xxx.yaml > @@ -75,15 +75,16 @@ additionalProperties: false > > examples: > - | > - i2c0 { > + bat: battery { > + compatible = "simple-battery"; > + voltage-min-design-microvolt = <3200000>; > + energy-full-design-microwatt-hours = <5290000>; > + charge-full-design-microamp-hours = <1430000>; > + }; > + > + i2c { > #address-cells = <1>; > #size-cells = <0>; > - bat: battery { > - compatible = "simple-battery"; > - voltage-min-design-microvolt = <3200000>; > - energy-full-design-microwatt-hours = <5290000>; > - charge-full-design-microamp-hours = <1430000>; > - }; > > bq27510g3: fuel-gauge@55 { > compatible = "ti,bq27510g3"; > diff --git a/Documentation/devicetree/bindings/power/supply/lltc,ltc294x.yaml b/Documentation/devicetree/bindings/power/supply/lltc,ltc294x.yaml > index 774582cd3a2c..e68a97cb49fe 100644 > --- a/Documentation/devicetree/bindings/power/supply/lltc,ltc294x.yaml > +++ b/Documentation/devicetree/bindings/power/supply/lltc,ltc294x.yaml > @@ -54,7 +54,7 @@ additionalProperties: false > > examples: > - | > - i2c0 { > + i2c { > #address-cells = <1>; > #size-cells = <0>; > battery@64 { > diff --git a/Documentation/devicetree/bindings/power/supply/ltc4162-l.yaml b/Documentation/devicetree/bindings/power/supply/ltc4162-l.yaml > index cfffaeef8b09..29d536541152 100644 > --- a/Documentation/devicetree/bindings/power/supply/ltc4162-l.yaml > +++ b/Documentation/devicetree/bindings/power/supply/ltc4162-l.yaml > @@ -54,7 +54,7 @@ additionalProperties: false > > examples: > - | > - i2c0 { > + i2c { > #address-cells = <1>; > #size-cells = <0>; > charger: battery-charger@68 { > diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max14656.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max14656.yaml > index 711066b8cdb9..b444b799848e 100644 > --- a/Documentation/devicetree/bindings/power/supply/maxim,max14656.yaml > +++ b/Documentation/devicetree/bindings/power/supply/maxim,max14656.yaml > @@ -32,7 +32,7 @@ additionalProperties: false > examples: > - | > #include <dt-bindings/interrupt-controller/irq.h> > - i2c0 { > + i2c { > #address-cells = <1>; > #size-cells = <0>; > > diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max17040.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max17040.yaml > index 3a529326ecbd..2627cd3eed83 100644 > --- a/Documentation/devicetree/bindings/power/supply/maxim,max17040.yaml > +++ b/Documentation/devicetree/bindings/power/supply/maxim,max17040.yaml > @@ -68,7 +68,7 @@ unevaluatedProperties: false > > examples: > - | > - i2c0 { > + i2c { > #address-cells = <1>; > #size-cells = <0>; > > @@ -82,7 +82,7 @@ examples: > }; > - | > #include <dt-bindings/interrupt-controller/irq.h> > - i2c0 { > + i2c { > #address-cells = <1>; > #size-cells = <0>; > > diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max17042.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max17042.yaml > index 64a0edb7bc47..085e2504d0dc 100644 > --- a/Documentation/devicetree/bindings/power/supply/maxim,max17042.yaml > +++ b/Documentation/devicetree/bindings/power/supply/maxim,max17042.yaml > @@ -69,7 +69,7 @@ additionalProperties: false > > examples: > - | > - i2c0 { > + i2c { > #address-cells = <1>; > #size-cells = <0>; > > diff --git a/Documentation/devicetree/bindings/power/supply/richtek,rt9455.yaml b/Documentation/devicetree/bindings/power/supply/richtek,rt9455.yaml > index 27bebc1757ba..07e38be39f1b 100644 > --- a/Documentation/devicetree/bindings/power/supply/richtek,rt9455.yaml > +++ b/Documentation/devicetree/bindings/power/supply/richtek,rt9455.yaml > @@ -68,7 +68,7 @@ additionalProperties: false > examples: > - | > #include <dt-bindings/interrupt-controller/irq.h> > - i2c0 { > + i2c { > #address-cells = <1>; > #size-cells = <0>; > > diff --git a/Documentation/devicetree/bindings/power/supply/ti,lp8727.yaml b/Documentation/devicetree/bindings/power/supply/ti,lp8727.yaml > index ce6fbdba8f6b..3a9e4310b433 100644 > --- a/Documentation/devicetree/bindings/power/supply/ti,lp8727.yaml > +++ b/Documentation/devicetree/bindings/power/supply/ti,lp8727.yaml > @@ -61,7 +61,7 @@ additionalProperties: false > examples: > - | > #include <dt-bindings/interrupt-controller/irq.h> > - i2c0 { > + i2c { > #address-cells = <1>; > #size-cells = <0>; > ...
Hi Rob. > .../bindings/display/bridge/analogix,anx7625.yaml | 2 +- > .../bindings/display/bridge/anx6345.yaml | 2 +- > .../bindings/display/bridge/lontium,lt8912b.yaml | 2 +- > .../bindings/display/bridge/nxp,ptn3460.yaml | 2 +- > .../bindings/display/bridge/ps8640.yaml | 2 +- > .../bindings/display/bridge/sil,sii9234.yaml | 2 +- > .../bindings/display/bridge/ti,dlpc3433.yaml | 2 +- > .../bindings/display/bridge/toshiba,tc358762.yaml | 2 +- > .../bindings/display/bridge/toshiba,tc358768.yaml | 2 +- > .../bindings/display/panel/nec,nl8048hl11.yaml | 2 +- Acked-by: Sam Ravnborg <sam@ravnborg.org> > index 669f70b1b4c4..8bd58913804a 100644 > --- a/Documentation/devicetree/bindings/display/solomon,ssd1307fb.yaml > +++ b/Documentation/devicetree/bindings/display/solomon,ssd1307fb.yaml > @@ -226,7 +226,7 @@ unevaluatedProperties: false > > examples: > - | > - i2c1 { > + i2c { > #address-cells = <1>; > #size-cells = <0>; > > @@ -239,7 +239,7 @@ examples: > > ssd1306_i2c: oled@3d { > compatible = "solomon,ssd1306"; > - reg = <0x3c>; > + reg = <0x3d>; > pwms = <&pwm 4 3000>; > reset-gpios = <&gpio2 7>; > solomon,com-lrremap; I can see this align the example with i2c-mux-gpio.yaml so the change should be fine. I am just positive surprised the tooling caught it. The change is Acked-by: Sam Ravnborg <sam@ravnborg.org> the above was just me thinking loud. Sam
On Tue, Feb 28, 2023 at 10:54 PM Rob Herring <robh@kernel.org> wrote: > > SPI and I2C bus node names are expected to be "spi" or "i2c", > respectively, with nothing else, a unit-address, or a '-N' index. A > pattern of 'spi0' or 'i2c0' or similar has crept in. Fix all these > cases. Mostly scripted with the following commands: > > git grep -l '\si2c[0-9] {' Documentation/devicetree/ | xargs sed -i -e 's/i2c[0-9] {/i2c {/' > git grep -l '\sspi[0-9] {' Documentation/devicetree/ | xargs sed -i -e 's/spi[0-9] {/spi {/' > > With this, a few errors in examples were exposed and fixed. > > Signed-off-by: Rob Herring <robh@kernel.org> > --- > Cc: Miguel Ojeda <ojeda@kernel.org> > Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org> > Cc: Benson Leung <bleung@chromium.org> > Cc: Guenter Roeck <groeck@chromium.org> > Cc: Stephen Boyd <sboyd@kernel.org> > Cc: Andrzej Hajda <andrzej.hajda@intel.com> > Cc: Neil Armstrong <neil.armstrong@linaro.org> > Cc: Robert Foss <rfoss@kernel.org> > Cc: Thierry Reding <thierry.reding@gmail.com> > Cc: Sam Ravnborg <sam@ravnborg.org> > Cc: MyungJoo Ham <myungjoo.ham@samsung.com> > Cc: Chanwoo Choi <cw00.choi@samsung.com> > Cc: Linus Walleij <linus.walleij@linaro.org> > Cc: Bartosz Golaszewski <brgl@bgdev.pl> > Cc: Pavel Machek <pavel@ucw.cz> > Cc: Lee Jones <lee@kernel.org> > Cc: Mauro Carvalho Chehab <mchehab@kernel.org> > Cc: "David S. Miller" <davem@davemloft.net> > Cc: Eric Dumazet <edumazet@google.com> > Cc: Jakub Kicinski <kuba@kernel.org> > Cc: Paolo Abeni <pabeni@redhat.com> > Cc: Wolfgang Grandegger <wg@grandegger.com> > Cc: Kalle Valo <kvalo@kernel.org> > Cc: Sebastian Reichel <sre@kernel.org> > Cc: Mark Brown <broonie@kernel.org> > Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> > Cc: linux-clk@vger.kernel.org > Cc: dri-devel@lists.freedesktop.org > Cc: linux-gpio@vger.kernel.org > Cc: linux-i2c@vger.kernel.org > Cc: linux-leds@vger.kernel.org > Cc: linux-media@vger.kernel.org > Cc: netdev@vger.kernel.org > Cc: linux-can@vger.kernel.org > Cc: linux-wireless@vger.kernel.org > Cc: linux-pm@vger.kernel.org > Cc: alsa-devel@alsa-project.org > Cc: linux-usb@vger.kernel.org > --- > .../bindings/auxdisplay/holtek,ht16k33.yaml | 2 +- > .../bindings/chrome/google,cros-ec-typec.yaml | 2 +- > .../chrome/google,cros-kbd-led-backlight.yaml | 2 +- > .../devicetree/bindings/clock/ti,lmk04832.yaml | 2 +- > .../bindings/display/bridge/analogix,anx7625.yaml | 2 +- > .../bindings/display/bridge/anx6345.yaml | 2 +- > .../bindings/display/bridge/lontium,lt8912b.yaml | 2 +- > .../bindings/display/bridge/nxp,ptn3460.yaml | 2 +- > .../bindings/display/bridge/ps8640.yaml | 2 +- > .../bindings/display/bridge/sil,sii9234.yaml | 2 +- > .../bindings/display/bridge/ti,dlpc3433.yaml | 2 +- > .../bindings/display/bridge/toshiba,tc358762.yaml | 2 +- > .../bindings/display/bridge/toshiba,tc358768.yaml | 2 +- > .../bindings/display/panel/nec,nl8048hl11.yaml | 2 +- > .../bindings/display/solomon,ssd1307fb.yaml | 4 ++-- > .../devicetree/bindings/eeprom/at25.yaml | 2 +- > .../bindings/extcon/extcon-usbc-cros-ec.yaml | 2 +- > .../bindings/extcon/extcon-usbc-tusb320.yaml | 2 +- > .../devicetree/bindings/gpio/gpio-pca9570.yaml | 2 +- > .../devicetree/bindings/gpio/gpio-pca95xx.yaml | 8 ++++---- Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
On Tue, 28 Feb 2023 15:54:33 -0600, Rob Herring wrote: > SPI and I2C bus node names are expected to be "spi" or "i2c", > respectively, with nothing else, a unit-address, or a '-N' index. A > pattern of 'spi0' or 'i2c0' or similar has crept in. Fix all these > cases. Mostly scripted with the following commands: > > git grep -l '\si2c[0-9] {' Documentation/devicetree/ | xargs sed -i -e 's/i2c[0-9] {/i2c {/' > git grep -l '\sspi[0-9] {' Documentation/devicetree/ | xargs sed -i -e 's/spi[0-9] {/spi {/' > > With this, a few errors in examples were exposed and fixed. > > Signed-off-by: Rob Herring <robh@kernel.org> > --- > Cc: Miguel Ojeda <ojeda@kernel.org> > Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org> > Cc: Benson Leung <bleung@chromium.org> > Cc: Guenter Roeck <groeck@chromium.org> > Cc: Stephen Boyd <sboyd@kernel.org> > Cc: Andrzej Hajda <andrzej.hajda@intel.com> > Cc: Neil Armstrong <neil.armstrong@linaro.org> > Cc: Robert Foss <rfoss@kernel.org> > Cc: Thierry Reding <thierry.reding@gmail.com> > Cc: Sam Ravnborg <sam@ravnborg.org> > Cc: MyungJoo Ham <myungjoo.ham@samsung.com> > Cc: Chanwoo Choi <cw00.choi@samsung.com> > Cc: Linus Walleij <linus.walleij@linaro.org> > Cc: Bartosz Golaszewski <brgl@bgdev.pl> > Cc: Pavel Machek <pavel@ucw.cz> > Cc: Lee Jones <lee@kernel.org> > Cc: Mauro Carvalho Chehab <mchehab@kernel.org> > Cc: "David S. Miller" <davem@davemloft.net> > Cc: Eric Dumazet <edumazet@google.com> > Cc: Jakub Kicinski <kuba@kernel.org> > Cc: Paolo Abeni <pabeni@redhat.com> > Cc: Wolfgang Grandegger <wg@grandegger.com> > Cc: Kalle Valo <kvalo@kernel.org> > Cc: Sebastian Reichel <sre@kernel.org> > Cc: Mark Brown <broonie@kernel.org> > Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> > Cc: linux-clk@vger.kernel.org > Cc: dri-devel@lists.freedesktop.org > Cc: linux-gpio@vger.kernel.org > Cc: linux-i2c@vger.kernel.org > Cc: linux-leds@vger.kernel.org > Cc: linux-media@vger.kernel.org > Cc: netdev@vger.kernel.org > Cc: linux-can@vger.kernel.org > Cc: linux-wireless@vger.kernel.org > Cc: linux-pm@vger.kernel.org > Cc: alsa-devel@alsa-project.org > Cc: linux-usb@vger.kernel.org > --- > .../bindings/auxdisplay/holtek,ht16k33.yaml | 2 +- > .../bindings/chrome/google,cros-ec-typec.yaml | 2 +- > .../chrome/google,cros-kbd-led-backlight.yaml | 2 +- > .../devicetree/bindings/clock/ti,lmk04832.yaml | 2 +- > .../bindings/display/bridge/analogix,anx7625.yaml | 2 +- > .../bindings/display/bridge/anx6345.yaml | 2 +- > .../bindings/display/bridge/lontium,lt8912b.yaml | 2 +- > .../bindings/display/bridge/nxp,ptn3460.yaml | 2 +- > .../bindings/display/bridge/ps8640.yaml | 2 +- > .../bindings/display/bridge/sil,sii9234.yaml | 2 +- > .../bindings/display/bridge/ti,dlpc3433.yaml | 2 +- > .../bindings/display/bridge/toshiba,tc358762.yaml | 2 +- > .../bindings/display/bridge/toshiba,tc358768.yaml | 2 +- > .../bindings/display/panel/nec,nl8048hl11.yaml | 2 +- > .../bindings/display/solomon,ssd1307fb.yaml | 4 ++-- > .../devicetree/bindings/eeprom/at25.yaml | 2 +- > .../bindings/extcon/extcon-usbc-cros-ec.yaml | 2 +- > .../bindings/extcon/extcon-usbc-tusb320.yaml | 2 +- > .../devicetree/bindings/gpio/gpio-pca9570.yaml | 2 +- > .../devicetree/bindings/gpio/gpio-pca95xx.yaml | 8 ++++---- > .../bindings/i2c/google,cros-ec-i2c-tunnel.yaml | 2 +- > .../bindings/leds/cznic,turris-omnia-leds.yaml | 2 +- > .../devicetree/bindings/leds/issi,is31fl319x.yaml | 2 +- > .../devicetree/bindings/leds/leds-aw2013.yaml | 2 +- > .../devicetree/bindings/leds/leds-rt4505.yaml | 2 +- > .../devicetree/bindings/leds/ti,tca6507.yaml | 2 +- > .../bindings/media/i2c/aptina,mt9p031.yaml | 2 +- > .../bindings/media/i2c/aptina,mt9v111.yaml | 2 +- > .../devicetree/bindings/media/i2c/imx219.yaml | 2 +- > .../devicetree/bindings/media/i2c/imx258.yaml | 4 ++-- > .../devicetree/bindings/media/i2c/mipi-ccs.yaml | 2 +- > .../bindings/media/i2c/ovti,ov5648.yaml | 2 +- > .../bindings/media/i2c/ovti,ov772x.yaml | 2 +- > .../bindings/media/i2c/ovti,ov8865.yaml | 2 +- > .../bindings/media/i2c/ovti,ov9282.yaml | 2 +- > .../bindings/media/i2c/rda,rda5807.yaml | 2 +- > .../bindings/media/i2c/sony,imx214.yaml | 2 +- > .../bindings/media/i2c/sony,imx274.yaml | 2 +- > .../bindings/media/i2c/sony,imx334.yaml | 2 +- > .../bindings/media/i2c/sony,imx335.yaml | 2 +- > .../bindings/media/i2c/sony,imx412.yaml | 2 +- > .../devicetree/bindings/mfd/actions,atc260x.yaml | 2 +- > .../devicetree/bindings/mfd/google,cros-ec.yaml | 6 +++--- > .../devicetree/bindings/mfd/ti,tps65086.yaml | 2 +- > .../devicetree/bindings/mfd/x-powers,axp152.yaml | 4 ++-- > .../devicetree/bindings/net/asix,ax88796c.yaml | 2 +- > .../bindings/net/can/microchip,mcp251xfd.yaml | 2 +- > .../bindings/net/dsa/microchip,ksz.yaml | 2 +- > .../bindings/net/nfc/samsung,s3fwrn5.yaml | 2 +- > .../bindings/net/vertexcom-mse102x.yaml | 2 +- > .../bindings/net/wireless/ti,wlcore.yaml | 10 ++++++++-- > .../devicetree/bindings/pinctrl/pinmux-node.yaml | 2 +- > .../bindings/pinctrl/starfive,jh7100-pinctrl.yaml | 2 +- > .../devicetree/bindings/power/supply/bq2415x.yaml | 2 +- > .../devicetree/bindings/power/supply/bq24190.yaml | 2 +- > .../devicetree/bindings/power/supply/bq24257.yaml | 4 ++-- > .../devicetree/bindings/power/supply/bq24735.yaml | 2 +- > .../devicetree/bindings/power/supply/bq2515x.yaml | 2 +- > .../devicetree/bindings/power/supply/bq25890.yaml | 2 +- > .../devicetree/bindings/power/supply/bq25980.yaml | 2 +- > .../devicetree/bindings/power/supply/bq27xxx.yaml | 15 ++++++++------- > .../bindings/power/supply/lltc,ltc294x.yaml | 2 +- > .../bindings/power/supply/ltc4162-l.yaml | 2 +- > .../bindings/power/supply/maxim,max14656.yaml | 2 +- > .../bindings/power/supply/maxim,max17040.yaml | 4 ++-- > .../bindings/power/supply/maxim,max17042.yaml | 2 +- > .../bindings/power/supply/richtek,rt9455.yaml | 2 +- > .../bindings/power/supply/ti,lp8727.yaml | 2 +- > .../bindings/regulator/active-semi,act8865.yaml | 2 +- > .../regulator/google,cros-ec-regulator.yaml | 2 +- > .../bindings/regulator/nxp,pf8x00-regulator.yaml | 2 +- > .../devicetree/bindings/sound/everest,es8316.yaml | 2 +- > .../devicetree/bindings/sound/tas2562.yaml | 2 +- > .../devicetree/bindings/sound/tas2770.yaml | 2 +- > .../devicetree/bindings/sound/tas27xx.yaml | 2 +- > .../devicetree/bindings/sound/tas5805m.yaml | 2 +- > .../devicetree/bindings/sound/tlv320adcx140.yaml | 2 +- > .../devicetree/bindings/sound/zl38060.yaml | 2 +- > .../devicetree/bindings/usb/maxim,max33359.yaml | 2 +- > .../bindings/usb/maxim,max3420-udc.yaml | 2 +- > .../bindings/usb/mediatek,mt6360-tcpc.yaml | 2 +- > .../devicetree/bindings/usb/richtek,rt1711h.yaml | 2 +- > .../devicetree/bindings/usb/richtek,rt1719.yaml | 2 +- > .../devicetree/bindings/usb/st,stusb160x.yaml | 2 +- > .../devicetree/bindings/usb/ti,hd3ss3220.yaml | 2 +- > .../devicetree/bindings/usb/ti,tps6598x.yaml | 2 +- > 86 files changed, 110 insertions(+), 103 deletions(-) > Applied, thanks!
diff --git a/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml b/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml index fc4873deb76f..286e726cd052 100644 --- a/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml +++ b/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml @@ -72,7 +72,7 @@ examples: #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/input/input.h> #include <dt-bindings/leds/common.h> - i2c1 { + i2c { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/chrome/google,cros-ec-typec.yaml b/Documentation/devicetree/bindings/chrome/google,cros-ec-typec.yaml index defcf1e12aa1..3b0548c34791 100644 --- a/Documentation/devicetree/bindings/chrome/google,cros-ec-typec.yaml +++ b/Documentation/devicetree/bindings/chrome/google,cros-ec-typec.yaml @@ -41,7 +41,7 @@ additionalProperties: false examples: - |+ - spi0 { + spi { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/chrome/google,cros-kbd-led-backlight.yaml b/Documentation/devicetree/bindings/chrome/google,cros-kbd-led-backlight.yaml index 40244d003c32..c94ab8f9e0b8 100644 --- a/Documentation/devicetree/bindings/chrome/google,cros-kbd-led-backlight.yaml +++ b/Documentation/devicetree/bindings/chrome/google,cros-kbd-led-backlight.yaml @@ -20,7 +20,7 @@ additionalProperties: false examples: - | - spi0 { + spi { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/clock/ti,lmk04832.yaml b/Documentation/devicetree/bindings/clock/ti,lmk04832.yaml index 73d17830f165..13d7b3d03d84 100644 --- a/Documentation/devicetree/bindings/clock/ti,lmk04832.yaml +++ b/Documentation/devicetree/bindings/clock/ti,lmk04832.yaml @@ -160,7 +160,7 @@ examples: }; }; - spi0 { + spi { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml index 4590186c4a0b..27026c78cd9b 100644 --- a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml +++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml @@ -134,7 +134,7 @@ examples: - | #include <dt-bindings/gpio/gpio.h> - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/display/bridge/anx6345.yaml b/Documentation/devicetree/bindings/display/bridge/anx6345.yaml index 9bf2cbcea69f..514f58852990 100644 --- a/Documentation/devicetree/bindings/display/bridge/anx6345.yaml +++ b/Documentation/devicetree/bindings/display/bridge/anx6345.yaml @@ -61,7 +61,7 @@ additionalProperties: false examples: - | - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/display/bridge/lontium,lt8912b.yaml b/Documentation/devicetree/bindings/display/bridge/lontium,lt8912b.yaml index 674891ee2f8e..f201ae4af4fb 100644 --- a/Documentation/devicetree/bindings/display/bridge/lontium,lt8912b.yaml +++ b/Documentation/devicetree/bindings/display/bridge/lontium,lt8912b.yaml @@ -67,7 +67,7 @@ examples: - | #include <dt-bindings/gpio/gpio.h> - i2c4 { + i2c { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/display/bridge/nxp,ptn3460.yaml b/Documentation/devicetree/bindings/display/bridge/nxp,ptn3460.yaml index 107dd138e6c6..0f61291d4268 100644 --- a/Documentation/devicetree/bindings/display/bridge/nxp,ptn3460.yaml +++ b/Documentation/devicetree/bindings/display/bridge/nxp,ptn3460.yaml @@ -71,7 +71,7 @@ examples: - | #include <dt-bindings/gpio/gpio.h> - i2c1 { + i2c { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/display/bridge/ps8640.yaml b/Documentation/devicetree/bindings/display/bridge/ps8640.yaml index 28811aff2c5a..5856450c5da7 100644 --- a/Documentation/devicetree/bindings/display/bridge/ps8640.yaml +++ b/Documentation/devicetree/bindings/display/bridge/ps8640.yaml @@ -73,7 +73,7 @@ additionalProperties: false examples: - | #include <dt-bindings/gpio/gpio.h> - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/display/bridge/sil,sii9234.yaml b/Documentation/devicetree/bindings/display/bridge/sil,sii9234.yaml index f88ddfe4818b..176181d25530 100644 --- a/Documentation/devicetree/bindings/display/bridge/sil,sii9234.yaml +++ b/Documentation/devicetree/bindings/display/bridge/sil,sii9234.yaml @@ -71,7 +71,7 @@ examples: #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> - i2c1 { + i2c { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/display/bridge/ti,dlpc3433.yaml b/Documentation/devicetree/bindings/display/bridge/ti,dlpc3433.yaml index 542193d77cdf..d3f84d220723 100644 --- a/Documentation/devicetree/bindings/display/bridge/ti,dlpc3433.yaml +++ b/Documentation/devicetree/bindings/display/bridge/ti,dlpc3433.yaml @@ -83,7 +83,7 @@ examples: - | #include <dt-bindings/gpio/gpio.h> - i2c1 { + i2c { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml index a412a1da950f..81ca3cbc7abe 100644 --- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml +++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml @@ -51,7 +51,7 @@ additionalProperties: false examples: - | - i2c1 { + i2c { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml index 0b6f5bef120f..779d8c57f854 100644 --- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml +++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml @@ -87,7 +87,7 @@ examples: - | #include <dt-bindings/gpio/gpio.h> - i2c1 { + i2c { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/display/panel/nec,nl8048hl11.yaml b/Documentation/devicetree/bindings/display/panel/nec,nl8048hl11.yaml index 3b09b359023e..accf933d6e46 100644 --- a/Documentation/devicetree/bindings/display/panel/nec,nl8048hl11.yaml +++ b/Documentation/devicetree/bindings/display/panel/nec,nl8048hl11.yaml @@ -41,7 +41,7 @@ examples: - | #include <dt-bindings/gpio/gpio.h> - spi0 { + spi { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/display/solomon,ssd1307fb.yaml b/Documentation/devicetree/bindings/display/solomon,ssd1307fb.yaml index 669f70b1b4c4..8bd58913804a 100644 --- a/Documentation/devicetree/bindings/display/solomon,ssd1307fb.yaml +++ b/Documentation/devicetree/bindings/display/solomon,ssd1307fb.yaml @@ -226,7 +226,7 @@ unevaluatedProperties: false examples: - | - i2c1 { + i2c { #address-cells = <1>; #size-cells = <0>; @@ -239,7 +239,7 @@ examples: ssd1306_i2c: oled@3d { compatible = "solomon,ssd1306"; - reg = <0x3c>; + reg = <0x3d>; pwms = <&pwm 4 3000>; reset-gpios = <&gpio2 7>; solomon,com-lrremap; diff --git a/Documentation/devicetree/bindings/eeprom/at25.yaml b/Documentation/devicetree/bindings/eeprom/at25.yaml index 0f5a8ef996d3..11e2a95a7bcb 100644 --- a/Documentation/devicetree/bindings/eeprom/at25.yaml +++ b/Documentation/devicetree/bindings/eeprom/at25.yaml @@ -122,7 +122,7 @@ unevaluatedProperties: false examples: - | #include <dt-bindings/gpio/gpio.h> - spi0 { + spi { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.yaml b/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.yaml index 2e5b39881449..e00c8072bae9 100644 --- a/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.yaml +++ b/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.yaml @@ -34,7 +34,7 @@ additionalProperties: false examples: - | - spi0 { + spi { #address-cells = <1>; #size-cells = <0>; cros-ec@0 { diff --git a/Documentation/devicetree/bindings/extcon/extcon-usbc-tusb320.yaml b/Documentation/devicetree/bindings/extcon/extcon-usbc-tusb320.yaml index 71a9f2e5d0dc..126107dd57b1 100644 --- a/Documentation/devicetree/bindings/extcon/extcon-usbc-tusb320.yaml +++ b/Documentation/devicetree/bindings/extcon/extcon-usbc-tusb320.yaml @@ -30,7 +30,7 @@ additionalProperties: false examples: - | - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; tusb320@61 { diff --git a/Documentation/devicetree/bindings/gpio/gpio-pca9570.yaml b/Documentation/devicetree/bindings/gpio/gpio-pca9570.yaml index 48bf414aa50e..5b0134304e51 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-pca9570.yaml +++ b/Documentation/devicetree/bindings/gpio/gpio-pca9570.yaml @@ -34,7 +34,7 @@ additionalProperties: false examples: - | - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml b/Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml index 1b70e9f308f3..fa116148ee90 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml +++ b/Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml @@ -151,7 +151,7 @@ examples: #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; @@ -177,7 +177,7 @@ examples: - | #include <dt-bindings/interrupt-controller/irq.h> - i2c1 { + i2c { #address-cells = <1>; #size-cells = <0>; @@ -203,7 +203,7 @@ examples: - | #include <dt-bindings/interrupt-controller/irq.h> - i2c2 { + i2c { #address-cells = <1>; #size-cells = <0>; @@ -221,7 +221,7 @@ examples: }; - | - i2c3 { + i2c { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/i2c/google,cros-ec-i2c-tunnel.yaml b/Documentation/devicetree/bindings/i2c/google,cros-ec-i2c-tunnel.yaml index cf523615f5e3..ab151c9db219 100644 --- a/Documentation/devicetree/bindings/i2c/google,cros-ec-i2c-tunnel.yaml +++ b/Documentation/devicetree/bindings/i2c/google,cros-ec-i2c-tunnel.yaml @@ -39,7 +39,7 @@ unevaluatedProperties: false examples: - | - spi0 { + spi { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml b/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml index 14bebe1ad8f8..34ef5215c150 100644 --- a/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml +++ b/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml @@ -58,7 +58,7 @@ examples: #include <dt-bindings/leds/common.h> - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/leds/issi,is31fl319x.yaml b/Documentation/devicetree/bindings/leds/issi,is31fl319x.yaml index d1b01bae9f63..3c0431c51159 100644 --- a/Documentation/devicetree/bindings/leds/issi,is31fl319x.yaml +++ b/Documentation/devicetree/bindings/leds/issi,is31fl319x.yaml @@ -165,7 +165,7 @@ examples: #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/leds/common.h> - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/leds/leds-aw2013.yaml b/Documentation/devicetree/bindings/leds/leds-aw2013.yaml index 6c3ea0f06cef..08f3e1cfc1b1 100644 --- a/Documentation/devicetree/bindings/leds/leds-aw2013.yaml +++ b/Documentation/devicetree/bindings/leds/leds-aw2013.yaml @@ -54,7 +54,7 @@ examples: #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/leds/common.h> - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/leds/leds-rt4505.yaml b/Documentation/devicetree/bindings/leds/leds-rt4505.yaml index cb71fec173c1..bfd0e240f7d6 100644 --- a/Documentation/devicetree/bindings/leds/leds-rt4505.yaml +++ b/Documentation/devicetree/bindings/leds/leds-rt4505.yaml @@ -39,7 +39,7 @@ examples: - | #include <dt-bindings/leds/common.h> - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/leds/ti,tca6507.yaml b/Documentation/devicetree/bindings/leds/ti,tca6507.yaml index 9ce5c0f16e17..4b1575e4f180 100644 --- a/Documentation/devicetree/bindings/leds/ti,tca6507.yaml +++ b/Documentation/devicetree/bindings/leds/ti,tca6507.yaml @@ -87,7 +87,7 @@ examples: #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/leds/common.h> - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/media/i2c/aptina,mt9p031.yaml b/Documentation/devicetree/bindings/media/i2c/aptina,mt9p031.yaml index 1d6af1bf9a6b..be00de2f2d58 100644 --- a/Documentation/devicetree/bindings/media/i2c/aptina,mt9p031.yaml +++ b/Documentation/devicetree/bindings/media/i2c/aptina,mt9p031.yaml @@ -82,7 +82,7 @@ additionalProperties: false examples: - | - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.yaml b/Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.yaml index e53b8d65f381..088022f88010 100644 --- a/Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.yaml +++ b/Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.yaml @@ -55,7 +55,7 @@ additionalProperties: false examples: - | - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/media/i2c/imx219.yaml b/Documentation/devicetree/bindings/media/i2c/imx219.yaml index 5fc96944b448..07d088cf66e0 100644 --- a/Documentation/devicetree/bindings/media/i2c/imx219.yaml +++ b/Documentation/devicetree/bindings/media/i2c/imx219.yaml @@ -83,7 +83,7 @@ additionalProperties: false examples: - | - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/media/i2c/imx258.yaml b/Documentation/devicetree/bindings/media/i2c/imx258.yaml index cde0f7383b2a..80d24220baa0 100644 --- a/Documentation/devicetree/bindings/media/i2c/imx258.yaml +++ b/Documentation/devicetree/bindings/media/i2c/imx258.yaml @@ -84,7 +84,7 @@ additionalProperties: false examples: - | - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; @@ -111,7 +111,7 @@ examples: }; - | - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml b/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml index edde4201116f..f8ace8cbccdb 100644 --- a/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml +++ b/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml @@ -106,7 +106,7 @@ examples: #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/media/video-interfaces.h> - i2c2 { + i2c { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov5648.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov5648.yaml index 61e4e9cf8783..1f497679168c 100644 --- a/Documentation/devicetree/bindings/media/i2c/ovti,ov5648.yaml +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov5648.yaml @@ -81,7 +81,7 @@ examples: #include <dt-bindings/clock/sun8i-v3s-ccu.h> #include <dt-bindings/gpio/gpio.h> - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov772x.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov772x.yaml index 161e6d598e1c..5d24edba8f99 100644 --- a/Documentation/devicetree/bindings/media/i2c/ovti,ov772x.yaml +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov772x.yaml @@ -107,7 +107,7 @@ examples: #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/media/video-interfaces.h> - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; ov772x: camera@21 { diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov8865.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov8865.yaml index 6bac326dceaf..8a70e23ba6ab 100644 --- a/Documentation/devicetree/bindings/media/i2c/ovti,ov8865.yaml +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov8865.yaml @@ -82,7 +82,7 @@ examples: #include <dt-bindings/clock/sun8i-a83t-ccu.h> #include <dt-bindings/gpio/gpio.h> - i2c2 { + i2c { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov9282.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov9282.yaml index 0c4654e70d46..79a7658f6d05 100644 --- a/Documentation/devicetree/bindings/media/i2c/ovti,ov9282.yaml +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov9282.yaml @@ -78,7 +78,7 @@ additionalProperties: false examples: - | - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/media/i2c/rda,rda5807.yaml b/Documentation/devicetree/bindings/media/i2c/rda,rda5807.yaml index f50e54a722eb..34a05df786ce 100644 --- a/Documentation/devicetree/bindings/media/i2c/rda,rda5807.yaml +++ b/Documentation/devicetree/bindings/media/i2c/rda,rda5807.yaml @@ -50,7 +50,7 @@ additionalProperties: false examples: - | - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml index c9760f895b3e..e2470dd5920c 100644 --- a/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml +++ b/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml @@ -97,7 +97,7 @@ examples: - | #include <dt-bindings/gpio/gpio.h> - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml index 4271fc3cc623..b397a730ee94 100644 --- a/Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml +++ b/Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml @@ -52,7 +52,7 @@ additionalProperties: false examples: - | - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx334.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx334.yaml index f5055b9db693..592cbcebc8ea 100644 --- a/Documentation/devicetree/bindings/media/i2c/sony,imx334.yaml +++ b/Documentation/devicetree/bindings/media/i2c/sony,imx334.yaml @@ -65,7 +65,7 @@ additionalProperties: false examples: - | - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx335.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx335.yaml index cf2ca2702cc9..a167dcdb3a32 100644 --- a/Documentation/devicetree/bindings/media/i2c/sony,imx335.yaml +++ b/Documentation/devicetree/bindings/media/i2c/sony,imx335.yaml @@ -66,7 +66,7 @@ additionalProperties: false examples: - | - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx412.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx412.yaml index 60dc25ff2b9e..d9b7815650fd 100644 --- a/Documentation/devicetree/bindings/media/i2c/sony,imx412.yaml +++ b/Documentation/devicetree/bindings/media/i2c/sony,imx412.yaml @@ -77,7 +77,7 @@ additionalProperties: false examples: - | - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/mfd/actions,atc260x.yaml b/Documentation/devicetree/bindings/mfd/actions,atc260x.yaml index c3a368a0fe93..6811246c5771 100644 --- a/Documentation/devicetree/bindings/mfd/actions,atc260x.yaml +++ b/Documentation/devicetree/bindings/mfd/actions,atc260x.yaml @@ -129,7 +129,7 @@ required: examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml b/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml index cdf1d719efe9..8caa48f4570e 100644 --- a/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml +++ b/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml @@ -246,7 +246,7 @@ examples: #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; @@ -263,7 +263,7 @@ examples: #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> - spi0 { + spi { #address-cells = <1>; #size-cells = <0>; @@ -296,7 +296,7 @@ examples: # Example for FPMCU - | - spi0 { + spi { #address-cells = <0x1>; #size-cells = <0x0>; diff --git a/Documentation/devicetree/bindings/mfd/ti,tps65086.yaml b/Documentation/devicetree/bindings/mfd/ti,tps65086.yaml index 3fdd9cb5b347..bd36a07c1721 100644 --- a/Documentation/devicetree/bindings/mfd/ti,tps65086.yaml +++ b/Documentation/devicetree/bindings/mfd/ti,tps65086.yaml @@ -95,7 +95,7 @@ required: examples: - | #include <dt-bindings/interrupt-controller/irq.h> - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml b/Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml index b7a8747d5fa0..24d03996b93a 100644 --- a/Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml +++ b/Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml @@ -299,7 +299,7 @@ additionalProperties: false examples: - | - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; @@ -315,7 +315,7 @@ examples: - | #include <dt-bindings/interrupt-controller/irq.h> - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/net/asix,ax88796c.yaml b/Documentation/devicetree/bindings/net/asix,ax88796c.yaml index 164d1ff9e83c..6b849a4349c0 100644 --- a/Documentation/devicetree/bindings/net/asix,ax88796c.yaml +++ b/Documentation/devicetree/bindings/net/asix,ax88796c.yaml @@ -58,7 +58,7 @@ examples: - | #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/gpio/gpio.h> - spi0 { + spi { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/net/can/microchip,mcp251xfd.yaml b/Documentation/devicetree/bindings/net/can/microchip,mcp251xfd.yaml index fce84aecae77..2a98b26630cb 100644 --- a/Documentation/devicetree/bindings/net/can/microchip,mcp251xfd.yaml +++ b/Documentation/devicetree/bindings/net/can/microchip,mcp251xfd.yaml @@ -62,7 +62,7 @@ examples: #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> - spi0 { + spi { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml b/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml index a4b53434c85c..e51be1ac0362 100644 --- a/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml +++ b/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml @@ -67,7 +67,7 @@ examples: }; }; - spi0 { + spi { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml b/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml index 41c9760227cd..12baee45752c 100644 --- a/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml +++ b/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml @@ -69,7 +69,7 @@ examples: #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> - i2c4 { + i2c { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/net/vertexcom-mse102x.yaml b/Documentation/devicetree/bindings/net/vertexcom-mse102x.yaml index 6a71f694cb55..1a2fec4857f5 100644 --- a/Documentation/devicetree/bindings/net/vertexcom-mse102x.yaml +++ b/Documentation/devicetree/bindings/net/vertexcom-mse102x.yaml @@ -55,7 +55,7 @@ additionalProperties: false examples: - | #include <dt-bindings/interrupt-controller/irq.h> - spi0 { + spi { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml b/Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml index f799a1e52173..75c9489f319b 100644 --- a/Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml +++ b/Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml @@ -89,7 +89,7 @@ examples: #include <dt-bindings/interrupt-controller/irq.h> // For wl12xx family: - spi1 { + spi { #address-cells = <1>; #size-cells = <0>; @@ -104,8 +104,11 @@ examples: }; }; + - | + #include <dt-bindings/interrupt-controller/irq.h> + // For wl18xx family: - spi2 { + spi { #address-cells = <1>; #size-cells = <0>; @@ -118,6 +121,9 @@ examples: }; }; + - | + #include <dt-bindings/interrupt-controller/irq.h> + // SDIO example: mmc3 { vmmc-supply = <&wlan_en_reg>; diff --git a/Documentation/devicetree/bindings/pinctrl/pinmux-node.yaml b/Documentation/devicetree/bindings/pinctrl/pinmux-node.yaml index 008c3ab7f1bb..ca9d246d46fe 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinmux-node.yaml +++ b/Documentation/devicetree/bindings/pinctrl/pinmux-node.yaml @@ -31,7 +31,7 @@ description: | }; }; state_1_node_a { - spi0 { + spi { function = "spi0"; groups = "spi0pins"; }; diff --git a/Documentation/devicetree/bindings/pinctrl/starfive,jh7100-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/starfive,jh7100-pinctrl.yaml index 69c0dd9998ea..d78c3cd0c295 100644 --- a/Documentation/devicetree/bindings/pinctrl/starfive,jh7100-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/starfive,jh7100-pinctrl.yaml @@ -293,7 +293,7 @@ examples: pinctrl-names = "default"; }; - i2c0 { + i2c { pinctrl-0 = <&i2c0_pins_default>; pinctrl-names = "default"; }; diff --git a/Documentation/devicetree/bindings/power/supply/bq2415x.yaml b/Documentation/devicetree/bindings/power/supply/bq2415x.yaml index f7287ffd4b12..13822346e708 100644 --- a/Documentation/devicetree/bindings/power/supply/bq2415x.yaml +++ b/Documentation/devicetree/bindings/power/supply/bq2415x.yaml @@ -77,7 +77,7 @@ additionalProperties: false examples: - | - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/power/supply/bq24190.yaml b/Documentation/devicetree/bindings/power/supply/bq24190.yaml index 001c0ffb408d..d3ebc9de8c0b 100644 --- a/Documentation/devicetree/bindings/power/supply/bq24190.yaml +++ b/Documentation/devicetree/bindings/power/supply/bq24190.yaml @@ -75,7 +75,7 @@ examples: charge-term-current-microamp = <128000>; }; - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/power/supply/bq24257.yaml b/Documentation/devicetree/bindings/power/supply/bq24257.yaml index cc45939d385b..eb064bbf876c 100644 --- a/Documentation/devicetree/bindings/power/supply/bq24257.yaml +++ b/Documentation/devicetree/bindings/power/supply/bq24257.yaml @@ -84,7 +84,7 @@ examples: - | #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; @@ -104,7 +104,7 @@ examples: - | #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/power/supply/bq24735.yaml b/Documentation/devicetree/bindings/power/supply/bq24735.yaml index 388ee16f8a1e..af41e7ccd784 100644 --- a/Documentation/devicetree/bindings/power/supply/bq24735.yaml +++ b/Documentation/devicetree/bindings/power/supply/bq24735.yaml @@ -77,7 +77,7 @@ examples: - | #include <dt-bindings/gpio/gpio.h> - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/power/supply/bq2515x.yaml b/Documentation/devicetree/bindings/power/supply/bq2515x.yaml index 1a1b240034ef..845822c87f2a 100644 --- a/Documentation/devicetree/bindings/power/supply/bq2515x.yaml +++ b/Documentation/devicetree/bindings/power/supply/bq2515x.yaml @@ -73,7 +73,7 @@ examples: constant-charge-voltage-max-microvolt = <4000000>; }; #include <dt-bindings/gpio/gpio.h> - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/power/supply/bq25890.yaml b/Documentation/devicetree/bindings/power/supply/bq25890.yaml index dae27e93af09..0ad302ab2bcc 100644 --- a/Documentation/devicetree/bindings/power/supply/bq25890.yaml +++ b/Documentation/devicetree/bindings/power/supply/bq25890.yaml @@ -102,7 +102,7 @@ unevaluatedProperties: false examples: - | #include <dt-bindings/interrupt-controller/irq.h> - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/power/supply/bq25980.yaml b/Documentation/devicetree/bindings/power/supply/bq25980.yaml index b687b8bcd705..b70ce8d7f86c 100644 --- a/Documentation/devicetree/bindings/power/supply/bq25980.yaml +++ b/Documentation/devicetree/bindings/power/supply/bq25980.yaml @@ -95,7 +95,7 @@ examples: }; #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/power/supply/bq27xxx.yaml b/Documentation/devicetree/bindings/power/supply/bq27xxx.yaml index 347d4433adc5..309ea33b5b25 100644 --- a/Documentation/devicetree/bindings/power/supply/bq27xxx.yaml +++ b/Documentation/devicetree/bindings/power/supply/bq27xxx.yaml @@ -75,15 +75,16 @@ additionalProperties: false examples: - | - i2c0 { + bat: battery { + compatible = "simple-battery"; + voltage-min-design-microvolt = <3200000>; + energy-full-design-microwatt-hours = <5290000>; + charge-full-design-microamp-hours = <1430000>; + }; + + i2c { #address-cells = <1>; #size-cells = <0>; - bat: battery { - compatible = "simple-battery"; - voltage-min-design-microvolt = <3200000>; - energy-full-design-microwatt-hours = <5290000>; - charge-full-design-microamp-hours = <1430000>; - }; bq27510g3: fuel-gauge@55 { compatible = "ti,bq27510g3"; diff --git a/Documentation/devicetree/bindings/power/supply/lltc,ltc294x.yaml b/Documentation/devicetree/bindings/power/supply/lltc,ltc294x.yaml index 774582cd3a2c..e68a97cb49fe 100644 --- a/Documentation/devicetree/bindings/power/supply/lltc,ltc294x.yaml +++ b/Documentation/devicetree/bindings/power/supply/lltc,ltc294x.yaml @@ -54,7 +54,7 @@ additionalProperties: false examples: - | - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; battery@64 { diff --git a/Documentation/devicetree/bindings/power/supply/ltc4162-l.yaml b/Documentation/devicetree/bindings/power/supply/ltc4162-l.yaml index cfffaeef8b09..29d536541152 100644 --- a/Documentation/devicetree/bindings/power/supply/ltc4162-l.yaml +++ b/Documentation/devicetree/bindings/power/supply/ltc4162-l.yaml @@ -54,7 +54,7 @@ additionalProperties: false examples: - | - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; charger: battery-charger@68 { diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max14656.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max14656.yaml index 711066b8cdb9..b444b799848e 100644 --- a/Documentation/devicetree/bindings/power/supply/maxim,max14656.yaml +++ b/Documentation/devicetree/bindings/power/supply/maxim,max14656.yaml @@ -32,7 +32,7 @@ additionalProperties: false examples: - | #include <dt-bindings/interrupt-controller/irq.h> - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max17040.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max17040.yaml index 3a529326ecbd..2627cd3eed83 100644 --- a/Documentation/devicetree/bindings/power/supply/maxim,max17040.yaml +++ b/Documentation/devicetree/bindings/power/supply/maxim,max17040.yaml @@ -68,7 +68,7 @@ unevaluatedProperties: false examples: - | - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; @@ -82,7 +82,7 @@ examples: }; - | #include <dt-bindings/interrupt-controller/irq.h> - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max17042.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max17042.yaml index 64a0edb7bc47..085e2504d0dc 100644 --- a/Documentation/devicetree/bindings/power/supply/maxim,max17042.yaml +++ b/Documentation/devicetree/bindings/power/supply/maxim,max17042.yaml @@ -69,7 +69,7 @@ additionalProperties: false examples: - | - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/power/supply/richtek,rt9455.yaml b/Documentation/devicetree/bindings/power/supply/richtek,rt9455.yaml index 27bebc1757ba..07e38be39f1b 100644 --- a/Documentation/devicetree/bindings/power/supply/richtek,rt9455.yaml +++ b/Documentation/devicetree/bindings/power/supply/richtek,rt9455.yaml @@ -68,7 +68,7 @@ additionalProperties: false examples: - | #include <dt-bindings/interrupt-controller/irq.h> - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/power/supply/ti,lp8727.yaml b/Documentation/devicetree/bindings/power/supply/ti,lp8727.yaml index ce6fbdba8f6b..3a9e4310b433 100644 --- a/Documentation/devicetree/bindings/power/supply/ti,lp8727.yaml +++ b/Documentation/devicetree/bindings/power/supply/ti,lp8727.yaml @@ -61,7 +61,7 @@ additionalProperties: false examples: - | #include <dt-bindings/interrupt-controller/irq.h> - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/regulator/active-semi,act8865.yaml b/Documentation/devicetree/bindings/regulator/active-semi,act8865.yaml index e8bf09faafb8..afe1abc2d727 100644 --- a/Documentation/devicetree/bindings/regulator/active-semi,act8865.yaml +++ b/Documentation/devicetree/bindings/regulator/active-semi,act8865.yaml @@ -90,7 +90,7 @@ examples: - | #include <dt-bindings/regulator/active-semi,8865-regulator.h> - i2c1 { + i2c { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/regulator/google,cros-ec-regulator.yaml b/Documentation/devicetree/bindings/regulator/google,cros-ec-regulator.yaml index 0921f012c901..0c6032de593a 100644 --- a/Documentation/devicetree/bindings/regulator/google,cros-ec-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/google,cros-ec-regulator.yaml @@ -32,7 +32,7 @@ unevaluatedProperties: false examples: - | - spi0 { + spi { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml b/Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml index aabf50f5b39e..e094c40a7072 100644 --- a/Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml @@ -109,7 +109,7 @@ additionalProperties: false examples: - | - i2c1 { + i2c { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/sound/everest,es8316.yaml b/Documentation/devicetree/bindings/sound/everest,es8316.yaml index d9f8f0c7f6bb..9f2b111818ea 100644 --- a/Documentation/devicetree/bindings/sound/everest,es8316.yaml +++ b/Documentation/devicetree/bindings/sound/everest,es8316.yaml @@ -40,7 +40,7 @@ unevaluatedProperties: false examples: - | - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; es8316: codec@11 { diff --git a/Documentation/devicetree/bindings/sound/tas2562.yaml b/Documentation/devicetree/bindings/sound/tas2562.yaml index 1085592cefcc..a5bb561bfcfb 100644 --- a/Documentation/devicetree/bindings/sound/tas2562.yaml +++ b/Documentation/devicetree/bindings/sound/tas2562.yaml @@ -66,7 +66,7 @@ unevaluatedProperties: false examples: - | #include <dt-bindings/gpio/gpio.h> - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; codec: codec@4c { diff --git a/Documentation/devicetree/bindings/sound/tas2770.yaml b/Documentation/devicetree/bindings/sound/tas2770.yaml index 982949ba8a4b..26088adb9dc2 100644 --- a/Documentation/devicetree/bindings/sound/tas2770.yaml +++ b/Documentation/devicetree/bindings/sound/tas2770.yaml @@ -68,7 +68,7 @@ unevaluatedProperties: false examples: - | #include <dt-bindings/gpio/gpio.h> - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; codec: codec@41 { diff --git a/Documentation/devicetree/bindings/sound/tas27xx.yaml b/Documentation/devicetree/bindings/sound/tas27xx.yaml index 0957dd435bb4..8cba01316855 100644 --- a/Documentation/devicetree/bindings/sound/tas27xx.yaml +++ b/Documentation/devicetree/bindings/sound/tas27xx.yaml @@ -61,7 +61,7 @@ unevaluatedProperties: false examples: - | #include <dt-bindings/gpio/gpio.h> - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; codec: codec@38 { diff --git a/Documentation/devicetree/bindings/sound/tas5805m.yaml b/Documentation/devicetree/bindings/sound/tas5805m.yaml index 3aade02d8a96..63edf52f061c 100644 --- a/Documentation/devicetree/bindings/sound/tas5805m.yaml +++ b/Documentation/devicetree/bindings/sound/tas5805m.yaml @@ -39,7 +39,7 @@ properties: examples: - | - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; tas5805m: tas5805m@2c { diff --git a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml index 6b8214071115..c16e1760cf85 100644 --- a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml +++ b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml @@ -192,7 +192,7 @@ additionalProperties: false examples: - | #include <dt-bindings/gpio/gpio.h> - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; codec: codec@4c { diff --git a/Documentation/devicetree/bindings/sound/zl38060.yaml b/Documentation/devicetree/bindings/sound/zl38060.yaml index 2c5c02e34573..8bd201e573aa 100644 --- a/Documentation/devicetree/bindings/sound/zl38060.yaml +++ b/Documentation/devicetree/bindings/sound/zl38060.yaml @@ -56,7 +56,7 @@ unevaluatedProperties: false examples: - | #include <dt-bindings/gpio/gpio.h> - spi0 { + spi { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/usb/maxim,max33359.yaml b/Documentation/devicetree/bindings/usb/maxim,max33359.yaml index 8e513a6af378..3cb631ea7079 100644 --- a/Documentation/devicetree/bindings/usb/maxim,max33359.yaml +++ b/Documentation/devicetree/bindings/usb/maxim,max33359.yaml @@ -40,7 +40,7 @@ examples: - | #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/usb/pd.h> - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/usb/maxim,max3420-udc.yaml b/Documentation/devicetree/bindings/usb/maxim,max3420-udc.yaml index 1d893d3d3432..8e0f4ecc010d 100644 --- a/Documentation/devicetree/bindings/usb/maxim,max3420-udc.yaml +++ b/Documentation/devicetree/bindings/usb/maxim,max3420-udc.yaml @@ -52,7 +52,7 @@ examples: - | #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> - spi0 { + spi { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/usb/mediatek,mt6360-tcpc.yaml b/Documentation/devicetree/bindings/usb/mediatek,mt6360-tcpc.yaml index c72257c19220..6cad7ae2c70d 100644 --- a/Documentation/devicetree/bindings/usb/mediatek,mt6360-tcpc.yaml +++ b/Documentation/devicetree/bindings/usb/mediatek,mt6360-tcpc.yaml @@ -43,7 +43,7 @@ examples: - | #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/usb/pd.h> - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/usb/richtek,rt1711h.yaml b/Documentation/devicetree/bindings/usb/richtek,rt1711h.yaml index 1999f614c89b..dd864b25a148 100644 --- a/Documentation/devicetree/bindings/usb/richtek,rt1711h.yaml +++ b/Documentation/devicetree/bindings/usb/richtek,rt1711h.yaml @@ -51,7 +51,7 @@ examples: - | #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/usb/pd.h> - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/usb/richtek,rt1719.yaml b/Documentation/devicetree/bindings/usb/richtek,rt1719.yaml index e3e87e4d3292..8b9bd2cc58e9 100644 --- a/Documentation/devicetree/bindings/usb/richtek,rt1719.yaml +++ b/Documentation/devicetree/bindings/usb/richtek,rt1719.yaml @@ -48,7 +48,7 @@ required: examples: - | #include <dt-bindings/interrupt-controller/irq.h> - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/usb/st,stusb160x.yaml b/Documentation/devicetree/bindings/usb/st,stusb160x.yaml index ffcd9897ea38..f6840cd5750d 100644 --- a/Documentation/devicetree/bindings/usb/st,stusb160x.yaml +++ b/Documentation/devicetree/bindings/usb/st,stusb160x.yaml @@ -56,7 +56,7 @@ additionalProperties: false examples: - | #include <dt-bindings/interrupt-controller/irq.h> - i2c4 { + i2c { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml index a1cffb70c621..54c6586cb56d 100644 --- a/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml +++ b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml @@ -51,7 +51,7 @@ additionalProperties: false examples: - | - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml b/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml index 348a715d61f4..7dfa34d11b0e 100644 --- a/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml +++ b/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml @@ -43,7 +43,7 @@ additionalProperties: true examples: - | #include <dt-bindings/interrupt-controller/irq.h> - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>;
SPI and I2C bus node names are expected to be "spi" or "i2c", respectively, with nothing else, a unit-address, or a '-N' index. A pattern of 'spi0' or 'i2c0' or similar has crept in. Fix all these cases. Mostly scripted with the following commands: git grep -l '\si2c[0-9] {' Documentation/devicetree/ | xargs sed -i -e 's/i2c[0-9] {/i2c {/' git grep -l '\sspi[0-9] {' Documentation/devicetree/ | xargs sed -i -e 's/spi[0-9] {/spi {/' With this, a few errors in examples were exposed and fixed. Signed-off-by: Rob Herring <robh@kernel.org> --- Cc: Miguel Ojeda <ojeda@kernel.org> Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org> Cc: Benson Leung <bleung@chromium.org> Cc: Guenter Roeck <groeck@chromium.org> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Neil Armstrong <neil.armstrong@linaro.org> Cc: Robert Foss <rfoss@kernel.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Chanwoo Choi <cw00.choi@samsung.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Bartosz Golaszewski <brgl@bgdev.pl> Cc: Pavel Machek <pavel@ucw.cz> Cc: Lee Jones <lee@kernel.org> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: Kalle Valo <kvalo@kernel.org> Cc: Sebastian Reichel <sre@kernel.org> Cc: Mark Brown <broonie@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-clk@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: linux-gpio@vger.kernel.org Cc: linux-i2c@vger.kernel.org Cc: linux-leds@vger.kernel.org Cc: linux-media@vger.kernel.org Cc: netdev@vger.kernel.org Cc: linux-can@vger.kernel.org Cc: linux-wireless@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: alsa-devel@alsa-project.org Cc: linux-usb@vger.kernel.org --- .../bindings/auxdisplay/holtek,ht16k33.yaml | 2 +- .../bindings/chrome/google,cros-ec-typec.yaml | 2 +- .../chrome/google,cros-kbd-led-backlight.yaml | 2 +- .../devicetree/bindings/clock/ti,lmk04832.yaml | 2 +- .../bindings/display/bridge/analogix,anx7625.yaml | 2 +- .../bindings/display/bridge/anx6345.yaml | 2 +- .../bindings/display/bridge/lontium,lt8912b.yaml | 2 +- .../bindings/display/bridge/nxp,ptn3460.yaml | 2 +- .../bindings/display/bridge/ps8640.yaml | 2 +- .../bindings/display/bridge/sil,sii9234.yaml | 2 +- .../bindings/display/bridge/ti,dlpc3433.yaml | 2 +- .../bindings/display/bridge/toshiba,tc358762.yaml | 2 +- .../bindings/display/bridge/toshiba,tc358768.yaml | 2 +- .../bindings/display/panel/nec,nl8048hl11.yaml | 2 +- .../bindings/display/solomon,ssd1307fb.yaml | 4 ++-- .../devicetree/bindings/eeprom/at25.yaml | 2 +- .../bindings/extcon/extcon-usbc-cros-ec.yaml | 2 +- .../bindings/extcon/extcon-usbc-tusb320.yaml | 2 +- .../devicetree/bindings/gpio/gpio-pca9570.yaml | 2 +- .../devicetree/bindings/gpio/gpio-pca95xx.yaml | 8 ++++---- .../bindings/i2c/google,cros-ec-i2c-tunnel.yaml | 2 +- .../bindings/leds/cznic,turris-omnia-leds.yaml | 2 +- .../devicetree/bindings/leds/issi,is31fl319x.yaml | 2 +- .../devicetree/bindings/leds/leds-aw2013.yaml | 2 +- .../devicetree/bindings/leds/leds-rt4505.yaml | 2 +- .../devicetree/bindings/leds/ti,tca6507.yaml | 2 +- .../bindings/media/i2c/aptina,mt9p031.yaml | 2 +- .../bindings/media/i2c/aptina,mt9v111.yaml | 2 +- .../devicetree/bindings/media/i2c/imx219.yaml | 2 +- .../devicetree/bindings/media/i2c/imx258.yaml | 4 ++-- .../devicetree/bindings/media/i2c/mipi-ccs.yaml | 2 +- .../bindings/media/i2c/ovti,ov5648.yaml | 2 +- .../bindings/media/i2c/ovti,ov772x.yaml | 2 +- .../bindings/media/i2c/ovti,ov8865.yaml | 2 +- .../bindings/media/i2c/ovti,ov9282.yaml | 2 +- .../bindings/media/i2c/rda,rda5807.yaml | 2 +- .../bindings/media/i2c/sony,imx214.yaml | 2 +- .../bindings/media/i2c/sony,imx274.yaml | 2 +- .../bindings/media/i2c/sony,imx334.yaml | 2 +- .../bindings/media/i2c/sony,imx335.yaml | 2 +- .../bindings/media/i2c/sony,imx412.yaml | 2 +- .../devicetree/bindings/mfd/actions,atc260x.yaml | 2 +- .../devicetree/bindings/mfd/google,cros-ec.yaml | 6 +++--- .../devicetree/bindings/mfd/ti,tps65086.yaml | 2 +- .../devicetree/bindings/mfd/x-powers,axp152.yaml | 4 ++-- .../devicetree/bindings/net/asix,ax88796c.yaml | 2 +- .../bindings/net/can/microchip,mcp251xfd.yaml | 2 +- .../bindings/net/dsa/microchip,ksz.yaml | 2 +- .../bindings/net/nfc/samsung,s3fwrn5.yaml | 2 +- .../bindings/net/vertexcom-mse102x.yaml | 2 +- .../bindings/net/wireless/ti,wlcore.yaml | 10 ++++++++-- .../devicetree/bindings/pinctrl/pinmux-node.yaml | 2 +- .../bindings/pinctrl/starfive,jh7100-pinctrl.yaml | 2 +- .../devicetree/bindings/power/supply/bq2415x.yaml | 2 +- .../devicetree/bindings/power/supply/bq24190.yaml | 2 +- .../devicetree/bindings/power/supply/bq24257.yaml | 4 ++-- .../devicetree/bindings/power/supply/bq24735.yaml | 2 +- .../devicetree/bindings/power/supply/bq2515x.yaml | 2 +- .../devicetree/bindings/power/supply/bq25890.yaml | 2 +- .../devicetree/bindings/power/supply/bq25980.yaml | 2 +- .../devicetree/bindings/power/supply/bq27xxx.yaml | 15 ++++++++------- .../bindings/power/supply/lltc,ltc294x.yaml | 2 +- .../bindings/power/supply/ltc4162-l.yaml | 2 +- .../bindings/power/supply/maxim,max14656.yaml | 2 +- .../bindings/power/supply/maxim,max17040.yaml | 4 ++-- .../bindings/power/supply/maxim,max17042.yaml | 2 +- .../bindings/power/supply/richtek,rt9455.yaml | 2 +- .../bindings/power/supply/ti,lp8727.yaml | 2 +- .../bindings/regulator/active-semi,act8865.yaml | 2 +- .../regulator/google,cros-ec-regulator.yaml | 2 +- .../bindings/regulator/nxp,pf8x00-regulator.yaml | 2 +- .../devicetree/bindings/sound/everest,es8316.yaml | 2 +- .../devicetree/bindings/sound/tas2562.yaml | 2 +- .../devicetree/bindings/sound/tas2770.yaml | 2 +- .../devicetree/bindings/sound/tas27xx.yaml | 2 +- .../devicetree/bindings/sound/tas5805m.yaml | 2 +- .../devicetree/bindings/sound/tlv320adcx140.yaml | 2 +- .../devicetree/bindings/sound/zl38060.yaml | 2 +- .../devicetree/bindings/usb/maxim,max33359.yaml | 2 +- .../bindings/usb/maxim,max3420-udc.yaml | 2 +- .../bindings/usb/mediatek,mt6360-tcpc.yaml | 2 +- .../devicetree/bindings/usb/richtek,rt1711h.yaml | 2 +- .../devicetree/bindings/usb/richtek,rt1719.yaml | 2 +- .../devicetree/bindings/usb/st,stusb160x.yaml | 2 +- .../devicetree/bindings/usb/ti,hd3ss3220.yaml | 2 +- .../devicetree/bindings/usb/ti,tps6598x.yaml | 2 +- 86 files changed, 110 insertions(+), 103 deletions(-)