diff --git a/drivers/gpu/drm/meson/Kconfig b/drivers/gpu/drm/meson/Kconfig
index 823909da87db..615fdd0ce41b 100644
--- a/drivers/gpu/drm/meson/Kconfig
+++ b/drivers/gpu/drm/meson/Kconfig
@@ -17,3 +17,10 @@ config DRM_MESON_DW_HDMI
 	default y if DRM_MESON
 	select DRM_DW_HDMI
 	imply DRM_DW_HDMI_I2S_AUDIO
+
+config DRM_MESON_DW_MIPI_DSI
+	tristate "MIPI DSI Synopsys Controller support for Amlogic Meson Display"
+	depends on DRM_MESON
+	default y if DRM_MESON
+	select DRM_DW_MIPI_DSI
+	select GENERIC_PHY_MIPI_DPHY
diff --git a/drivers/gpu/drm/meson/Makefile b/drivers/gpu/drm/meson/Makefile
index 833e18c20603..43071bdbd4b9 100644
--- a/drivers/gpu/drm/meson/Makefile
+++ b/drivers/gpu/drm/meson/Makefile
@@ -6,3 +6,4 @@ meson-drm-y += meson_encoder_hdmi.o meson_encoder_dsi.o
 
 obj-$(CONFIG_DRM_MESON) += meson-drm.o
 obj-$(CONFIG_DRM_MESON_DW_HDMI) += meson_dw_hdmi.o
+obj-$(CONFIG_DRM_MESON_DW_MIPI_DSI) += meson_dw_mipi_dsi.o
diff --git a/drivers/gpu/drm/meson/meson_dw_mipi_dsi.c b/drivers/gpu/drm/meson/meson_dw_mipi_dsi.c
new file mode 100644
index 000000000000..bb5dea8aab36
--- /dev/null
+++ b/drivers/gpu/drm/meson/meson_dw_mipi_dsi.c
@@ -0,0 +1,364 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2021 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ * Copyright (C) 2015 Amlogic, Inc. All rights reserved.
+ */
+
+#include <linux/clk.h>
+#include <linux/component.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/of_graph.h>
+#include <linux/reset.h>
+#include <linux/phy/phy.h>
+#include <linux/bitfield.h>
+
+#include <video/mipi_display.h>
+
+#include <drm/bridge/dw_mipi_dsi.h>
+#include <drm/drm_mipi_dsi.h>
+
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_device.h>
+#include <drm/drm_probe_helper.h>
+#include <drm/drm_print.h>
+
+#include "meson_drv.h"
+#include "meson_dw_mipi_dsi.h"
+#include "meson_registers.h"
+#include "meson_venc.h"
+
+#define DRIVER_NAME "meson-dw-mipi-dsi"
+#define DRIVER_DESC "Amlogic Meson MIPI-DSI DRM driver"
+
+struct meson_dw_mipi_dsi {
+	struct meson_drm *priv;
+	struct device *dev;
+	void __iomem *base;
+	struct phy *phy;
+	union phy_configure_opts phy_opts;
+	struct dw_mipi_dsi *dmd;
+	struct dw_mipi_dsi_plat_data pdata;
+	struct mipi_dsi_device *dsi_device;
+	const struct drm_display_mode *mode;
+	struct clk *bit_clk;
+	struct clk *px_clk;
+	struct reset_control *top_rst;
+};
+
+#define encoder_to_meson_dw_mipi_dsi(x) \
+	container_of(x, struct meson_dw_mipi_dsi, encoder)
+
+static void meson_dw_mipi_dsi_hw_init(struct meson_dw_mipi_dsi *mipi_dsi)
+{
+	/* Software reset */
+	writel_bits_relaxed(MIPI_DSI_TOP_SW_RESET_DWC | MIPI_DSI_TOP_SW_RESET_INTR |
+			    MIPI_DSI_TOP_SW_RESET_DPI | MIPI_DSI_TOP_SW_RESET_TIMING,
+			    MIPI_DSI_TOP_SW_RESET_DWC | MIPI_DSI_TOP_SW_RESET_INTR |
+			    MIPI_DSI_TOP_SW_RESET_DPI | MIPI_DSI_TOP_SW_RESET_TIMING,
+			    mipi_dsi->base + MIPI_DSI_TOP_SW_RESET);
+	writel_bits_relaxed(MIPI_DSI_TOP_SW_RESET_DWC | MIPI_DSI_TOP_SW_RESET_INTR |
+			    MIPI_DSI_TOP_SW_RESET_DPI | MIPI_DSI_TOP_SW_RESET_TIMING,
+			    0, mipi_dsi->base + MIPI_DSI_TOP_SW_RESET);
+
+	/* Enable clocks */
+	writel_bits_relaxed(MIPI_DSI_TOP_CLK_SYSCLK_EN | MIPI_DSI_TOP_CLK_PIXCLK_EN,
+			    MIPI_DSI_TOP_CLK_SYSCLK_EN | MIPI_DSI_TOP_CLK_PIXCLK_EN,
+			    mipi_dsi->base + MIPI_DSI_TOP_CLK_CNTL);
+
+	/* Take memory out of power down */
+	writel_relaxed(0, mipi_dsi->base + MIPI_DSI_TOP_MEM_PD);
+}
+
+static int dw_mipi_dsi_phy_init(void *priv_data)
+{
+	struct meson_dw_mipi_dsi *mipi_dsi = priv_data;
+	unsigned int dpi_data_format, venc_data_width;
+	int ret;
+
+	/* Set the bit clock rate to hs_clk_rate */
+	ret = clk_set_rate(mipi_dsi->bit_clk,
+			   mipi_dsi->phy_opts.mipi_dphy.hs_clk_rate);
+	if (ret) {
+		dev_err(mipi_dsi->dev, "Failed to set DSI Bit clock rate %lu (ret %d)\n",
+			mipi_dsi->phy_opts.mipi_dphy.hs_clk_rate, ret);
+		return ret;
+	}
+
+	/* Make sure the rate of the bit clock is not modified by someone else */
+	ret = clk_rate_exclusive_get(mipi_dsi->bit_clk);
+	if (ret) {
+		dev_err(mipi_dsi->dev,
+			"Failed to set the exclusivity on the bit clock rate (ret %d)\n", ret);
+		return ret;
+	}
+
+	ret = clk_set_rate(mipi_dsi->px_clk, mipi_dsi->mode->clock * 1000);
+
+	if (ret) {
+		dev_err(mipi_dsi->dev, "Failed to set DSI Pixel clock rate %u (%d)\n",
+			mipi_dsi->mode->clock * 1000, ret);
+		return ret;
+	}
+
+	switch (mipi_dsi->dsi_device->format) {
+	case MIPI_DSI_FMT_RGB888:
+		dpi_data_format = DPI_COLOR_24BIT;
+		venc_data_width = VENC_IN_COLOR_24B;
+		break;
+	case MIPI_DSI_FMT_RGB666:
+		dpi_data_format = DPI_COLOR_18BIT_CFG_2;
+		venc_data_width = VENC_IN_COLOR_18B;
+		break;
+	case MIPI_DSI_FMT_RGB666_PACKED:
+	case MIPI_DSI_FMT_RGB565:
+		return -EINVAL;
+	};
+
+	/* Configure color format for DPI register */
+	writel_relaxed(FIELD_PREP(MIPI_DSI_TOP_DPI_COLOR_MODE, dpi_data_format) |
+		       FIELD_PREP(MIPI_DSI_TOP_IN_COLOR_MODE, venc_data_width) |
+		       FIELD_PREP(MIPI_DSI_TOP_COMP2_SEL, 2) |
+		       FIELD_PREP(MIPI_DSI_TOP_COMP1_SEL, 1) |
+		       FIELD_PREP(MIPI_DSI_TOP_COMP0_SEL, 0) |
+		       (mipi_dsi->mode->flags & DRM_MODE_FLAG_NHSYNC ?
+				0 : MIPI_DSI_TOP_HSYNC_INVERT) |
+		       (mipi_dsi->mode->flags & DRM_MODE_FLAG_NVSYNC ?
+				0 : MIPI_DSI_TOP_VSYNC_INVERT),
+			mipi_dsi->base + MIPI_DSI_TOP_CNTL);
+
+	return phy_configure(mipi_dsi->phy, &mipi_dsi->phy_opts);
+}
+
+static void dw_mipi_dsi_phy_power_on(void *priv_data)
+{
+	struct meson_dw_mipi_dsi *mipi_dsi = priv_data;
+
+	if (phy_power_on(mipi_dsi->phy))
+		dev_warn(mipi_dsi->dev, "Failed to power on PHY\n");
+}
+
+static void dw_mipi_dsi_phy_power_off(void *priv_data)
+{
+	struct meson_dw_mipi_dsi *mipi_dsi = priv_data;
+
+	if (phy_power_off(mipi_dsi->phy))
+		dev_warn(mipi_dsi->dev, "Failed to power off PHY\n");
+
+	/* Remove the exclusivity on the bit clock rate */
+	clk_rate_exclusive_put(mipi_dsi->bit_clk);
+}
+
+static int
+dw_mipi_dsi_get_lane_mbps(void *priv_data, const struct drm_display_mode *mode,
+			  unsigned long mode_flags, u32 lanes, u32 format,
+			  unsigned int *lane_mbps)
+{
+	struct meson_dw_mipi_dsi *mipi_dsi = priv_data;
+	int bpp;
+
+	mipi_dsi->mode = mode;
+
+	bpp = mipi_dsi_pixel_format_to_bpp(mipi_dsi->dsi_device->format);
+
+	phy_mipi_dphy_get_default_config(mode->clock * 1000,
+					 bpp, mipi_dsi->dsi_device->lanes,
+					 &mipi_dsi->phy_opts.mipi_dphy);
+
+	/* Use the rate set as base of hs_clk_rate */
+	mipi_dsi->phy_opts.mipi_dphy.hs_clk_rate = clk_get_rate(mipi_dsi->bit_clk);
+
+	*lane_mbps = DIV_ROUND_UP(mipi_dsi->phy_opts.mipi_dphy.hs_clk_rate, USEC_PER_SEC);
+
+	return 0;
+}
+
+static int
+dw_mipi_dsi_phy_get_timing(void *priv_data, unsigned int lane_mbps,
+			   struct dw_mipi_dsi_dphy_timing *timing)
+{
+	/* TOFIX handle other cases */
+
+	timing->clk_lp2hs = 37;
+	timing->clk_hs2lp = 135;
+	timing->data_lp2hs = 50;
+	timing->data_hs2lp = 3;
+
+	return 0;
+}
+
+static int
+dw_mipi_dsi_get_esc_clk_rate(void *priv_data, unsigned int *esc_clk_rate)
+{
+	*esc_clk_rate = 4; /* Mhz */
+
+	return 0;
+}
+
+static const struct dw_mipi_dsi_phy_ops meson_dw_mipi_dsi_phy_ops = {
+	.init = dw_mipi_dsi_phy_init,
+	.power_on = dw_mipi_dsi_phy_power_on,
+	.power_off = dw_mipi_dsi_phy_power_off,
+	.get_lane_mbps = dw_mipi_dsi_get_lane_mbps,
+	.get_timing = dw_mipi_dsi_phy_get_timing,
+	.get_esc_clk_rate = dw_mipi_dsi_get_esc_clk_rate,
+};
+
+static int meson_dw_mipi_dsi_host_attach(void *priv_data,
+					 struct mipi_dsi_device *device)
+{
+	struct meson_dw_mipi_dsi *mipi_dsi = priv_data;
+	int ret;
+
+	mipi_dsi->dsi_device = device;
+
+	switch (device->format) {
+	case MIPI_DSI_FMT_RGB888:
+		break;
+	case MIPI_DSI_FMT_RGB666:
+		break;
+	case MIPI_DSI_FMT_RGB666_PACKED:
+	case MIPI_DSI_FMT_RGB565:
+		dev_err(mipi_dsi->dev, "invalid pixel format %d\n", device->format);
+		return -EINVAL;
+	};
+
+	ret = phy_init(mipi_dsi->phy);
+	if (ret)
+		return ret;
+
+	meson_dw_mipi_dsi_hw_init(mipi_dsi);
+
+	return 0;
+}
+
+static int meson_dw_mipi_dsi_host_detach(void *priv_data,
+					 struct mipi_dsi_device *device)
+{
+	struct meson_dw_mipi_dsi *mipi_dsi = priv_data;
+
+	if (device == mipi_dsi->dsi_device)
+		mipi_dsi->dsi_device = NULL;
+	else
+		return -EINVAL;
+
+	return phy_exit(mipi_dsi->phy);
+}
+
+static const struct dw_mipi_dsi_host_ops meson_dw_mipi_dsi_host_ops = {
+	.attach = meson_dw_mipi_dsi_host_attach,
+	.detach = meson_dw_mipi_dsi_host_detach,
+};
+
+static int meson_dw_mipi_dsi_bind(struct device *dev, struct device *master,
+				  void *data)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct meson_dw_mipi_dsi *mipi_dsi;
+
+	mipi_dsi = devm_kzalloc(dev, sizeof(*mipi_dsi), GFP_KERNEL);
+	if (!mipi_dsi)
+		return -ENOMEM;
+
+	mipi_dsi->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(mipi_dsi->base))
+		return PTR_ERR(mipi_dsi->base);
+
+	mipi_dsi->phy = devm_phy_get(dev, "dphy");
+	if (IS_ERR(mipi_dsi->phy))
+		return dev_err_probe(dev, PTR_ERR(mipi_dsi->phy),
+				     "failed to get mipi dphy\n");
+
+	mipi_dsi->bit_clk = devm_clk_get_enabled(dev, "bit_clk");
+	if (IS_ERR(mipi_dsi->bit_clk)) {
+		int ret = PTR_ERR(mipi_dsi->bit_clk);
+
+		/* TOFIX GP0 on some platforms fails to lock in early boot, defer probe */
+		if (ret == -EIO)
+			ret = -EPROBE_DEFER;
+
+		return dev_err_probe(dev, ret, "Unable to get enabled bit_clk\n");
+	}
+
+	mipi_dsi->px_clk = devm_clk_get_enabled(dev, "px_clk");
+	if (IS_ERR(mipi_dsi->px_clk))
+		return dev_err_probe(dev, PTR_ERR(mipi_dsi->px_clk),
+				     "Unable to get enabled px_lk\n");
+
+	/*
+	 * We use a TOP reset signal because the APB reset signal
+	 * is handled by the TOP control registers.
+	 */
+	mipi_dsi->top_rst = devm_reset_control_get_exclusive(dev, "top");
+	if (IS_ERR(mipi_dsi->top_rst))
+		return dev_err_probe(dev, PTR_ERR(mipi_dsi->top_rst),
+				     "Unable to get reset control\n");
+
+	reset_control_assert(mipi_dsi->top_rst);
+	usleep_range(10, 20);
+	reset_control_deassert(mipi_dsi->top_rst);
+
+	/* MIPI DSI Controller */
+
+	mipi_dsi->dev = dev;
+	mipi_dsi->pdata.base = mipi_dsi->base;
+	mipi_dsi->pdata.max_data_lanes = 4;
+	mipi_dsi->pdata.phy_ops = &meson_dw_mipi_dsi_phy_ops;
+	mipi_dsi->pdata.host_ops = &meson_dw_mipi_dsi_host_ops;
+	mipi_dsi->pdata.priv_data = mipi_dsi;
+	platform_set_drvdata(pdev, mipi_dsi);
+
+	mipi_dsi->dmd = dw_mipi_dsi_probe(pdev, &mipi_dsi->pdata);
+	if (IS_ERR(mipi_dsi->dmd))
+		return dev_err_probe(dev, PTR_ERR(mipi_dsi->dmd),
+				     "Failed to probe dw_mipi_dsi\n");
+
+	return 0;
+}
+
+static void meson_dw_mipi_dsi_unbind(struct device *dev, struct device *master,
+				     void *data)
+{
+	struct meson_dw_mipi_dsi *mipi_dsi = dev_get_drvdata(dev);
+
+	dw_mipi_dsi_remove(mipi_dsi->dmd);
+}
+
+static const struct component_ops meson_dw_mipi_dsi_ops = {
+	.bind	= meson_dw_mipi_dsi_bind,
+	.unbind	= meson_dw_mipi_dsi_unbind,
+};
+
+static int meson_dw_mipi_dsi_probe(struct platform_device *pdev)
+{
+	return component_add(&pdev->dev, &meson_dw_mipi_dsi_ops);
+}
+
+static int meson_dw_mipi_dsi_remove(struct platform_device *pdev)
+{
+	component_del(&pdev->dev, &meson_dw_mipi_dsi_ops);
+
+	return 0;
+}
+
+static const struct of_device_id meson_dw_mipi_dsi_of_table[] = {
+	{ .compatible = "amlogic,meson-g12a-dw-mipi-dsi", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, meson_dw_mipi_dsi_of_table);
+
+static struct platform_driver meson_dw_mipi_dsi_platform_driver = {
+	.probe		= meson_dw_mipi_dsi_probe,
+	.remove		= meson_dw_mipi_dsi_remove,
+	.driver		= {
+		.name		= DRIVER_NAME,
+		.of_match_table	= meson_dw_mipi_dsi_of_table,
+	},
+};
+module_platform_driver(meson_dw_mipi_dsi_platform_driver);
+
+MODULE_AUTHOR("Neil Armstrong <narmstrong@baylibre.com>");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpu/drm/meson/meson_dw_mipi_dsi.h b/drivers/gpu/drm/meson/meson_dw_mipi_dsi.h
new file mode 100644
index 000000000000..e1bd6b85d6a3
--- /dev/null
+++ b/drivers/gpu/drm/meson/meson_dw_mipi_dsi.h
@@ -0,0 +1,160 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (C) 2020 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ * Copyright (C) 2018 Amlogic, Inc. All rights reserved.
+ */
+
+#ifndef __MESON_DW_MIPI_DSI_H
+#define __MESON_DW_MIPI_DSI_H
+
+/* Top-level registers */
+/* [31: 4]    Reserved.     Default 0.
+ *     [3] RW timing_rst_n: Default 1.
+ *		1=Assert SW reset of timing feature.   0=Release reset.
+ *     [2] RW dpi_rst_n: Default 1.
+ *		1=Assert SW reset on mipi_dsi_host_dpi block.   0=Release reset.
+ *     [1] RW intr_rst_n: Default 1.
+ *		1=Assert SW reset on mipi_dsi_host_intr block.  0=Release reset.
+ *     [0] RW dwc_rst_n:  Default 1.
+ *		1=Assert SW reset on IP core.   0=Release reset.
+ */
+#define MIPI_DSI_TOP_SW_RESET                      0x3c0
+
+#define MIPI_DSI_TOP_SW_RESET_DWC	BIT(0)
+#define MIPI_DSI_TOP_SW_RESET_INTR	BIT(1)
+#define MIPI_DSI_TOP_SW_RESET_DPI	BIT(2)
+#define MIPI_DSI_TOP_SW_RESET_TIMING	BIT(3)
+
+/* [31: 5] Reserved.   Default 0.
+ *     [4] RW manual_edpihalt: Default 0.
+ *		1=Manual suspend VencL; 0=do not suspend VencL.
+ *     [3] RW auto_edpihalt_en: Default 0.
+ *		1=Enable IP's edpihalt signal to suspend VencL;
+ *		0=IP's edpihalt signal does not affect VencL.
+ *     [2] RW clock_freerun: Apply to auto-clock gate only. Default 0.
+ *		0=Default, use auto-clock gating to save power;
+ *		1=use free-run clock, disable auto-clock gating, for debug mode.
+ *     [1] RW enable_pixclk: A manual clock gate option, due to DWC IP does not
+ *		have auto-clock gating. 1=Enable pixclk.      Default 0.
+ *     [0] RW enable_sysclk: A manual clock gate option, due to DWC IP does not
+ *		have auto-clock gating. 1=Enable sysclk.      Default 0.
+ */
+#define MIPI_DSI_TOP_CLK_CNTL                      0x3c4
+
+#define MIPI_DSI_TOP_CLK_SYSCLK_EN	BIT(0)
+#define MIPI_DSI_TOP_CLK_PIXCLK_EN	BIT(1)
+
+/* [31:24]    Reserved. Default 0.
+ * [23:20] RW dpi_color_mode: Define DPI pixel format. Default 0.
+ *		0=16-bit RGB565 config 1;
+ *		1=16-bit RGB565 config 2;
+ *		2=16-bit RGB565 config 3;
+ *		3=18-bit RGB666 config 1;
+ *		4=18-bit RGB666 config 2;
+ *		5=24-bit RGB888;
+ *		6=20-bit YCbCr 4:2:2;
+ *		7=24-bit YCbCr 4:2:2;
+ *		8=16-bit YCbCr 4:2:2;
+ *		9=30-bit RGB;
+ *		10=36-bit RGB;
+ *		11=12-bit YCbCr 4:2:0.
+ *    [19] Reserved. Default 0.
+ * [18:16] RW in_color_mode:  Define VENC data width. Default 0.
+ *		0=30-bit pixel;
+ *		1=24-bit pixel;
+ *		2=18-bit pixel, RGB666;
+ *		3=16-bit pixel, RGB565.
+ * [15:14] RW chroma_subsample: Define method of chroma subsampling. Default 0.
+ *		Applicable to YUV422 or YUV420 only.
+ *		0=Use even pixel's chroma;
+ *		1=Use odd pixel's chroma;
+ *		2=Use averaged value between even and odd pair.
+ * [13:12] RW comp2_sel:  Select which component to be Cr or B: Default 2.
+ *		0=comp0; 1=comp1; 2=comp2.
+ * [11:10] RW comp1_sel:  Select which component to be Cb or G: Default 1.
+ *		0=comp0; 1=comp1; 2=comp2.
+ *  [9: 8] RW comp0_sel:  Select which component to be Y  or R: Default 0.
+ *		0=comp0; 1=comp1; 2=comp2.
+ *     [7]    Reserved. Default 0.
+ *     [6] RW de_pol:  Default 0.
+ *		If DE input is active low, set to 1 to invert to active high.
+ *     [5] RW hsync_pol: Default 0.
+ *		If HS input is active low, set to 1 to invert to active high.
+ *     [4] RW vsync_pol: Default 0.
+ *		If VS input is active low, set to 1 to invert to active high.
+ *     [3] RW dpicolorm: Signal to IP.   Default 0.
+ *     [2] RW dpishutdn: Signal to IP.   Default 0.
+ *     [1]    Reserved.  Default 0.
+ *     [0]    Reserved.  Default 0.
+ */
+#define MIPI_DSI_TOP_CNTL                          0x3c8
+
+/* VENC data width */
+#define VENC_IN_COLOR_30B   0x0
+#define VENC_IN_COLOR_24B   0x1
+#define VENC_IN_COLOR_18B   0x2
+#define VENC_IN_COLOR_16B   0x3
+
+/* DPI pixel format */
+#define DPI_COLOR_16BIT_CFG_1		0
+#define DPI_COLOR_16BIT_CFG_2		1
+#define DPI_COLOR_16BIT_CFG_3		2
+#define DPI_COLOR_18BIT_CFG_1		3
+#define DPI_COLOR_18BIT_CFG_2		4
+#define DPI_COLOR_24BIT			5
+#define DPI_COLOR_20BIT_YCBCR_422	6
+#define DPI_COLOR_24BIT_YCBCR_422	7
+#define DPI_COLOR_16BIT_YCBCR_422	8
+#define DPI_COLOR_30BIT			9
+#define DPI_COLOR_36BIT			10
+#define DPI_COLOR_12BIT_YCBCR_420	11
+
+#define MIPI_DSI_TOP_DPI_COLOR_MODE	GENMASK(23, 20)
+#define MIPI_DSI_TOP_IN_COLOR_MODE	GENMASK(18, 16)
+#define MIPI_DSI_TOP_CHROMA_SUBSAMPLE	GENMASK(15, 14)
+#define MIPI_DSI_TOP_COMP2_SEL		GENMASK(13, 12)
+#define MIPI_DSI_TOP_COMP1_SEL		GENMASK(11, 10)
+#define MIPI_DSI_TOP_COMP0_SEL		GENMASK(9, 8)
+#define MIPI_DSI_TOP_DE_INVERT		BIT(6)
+#define MIPI_DSI_TOP_HSYNC_INVERT	BIT(5)
+#define MIPI_DSI_TOP_VSYNC_INVERT	BIT(4)
+#define MIPI_DSI_TOP_DPICOLORM		BIT(3)
+#define MIPI_DSI_TOP_DPISHUTDN		BIT(2)
+
+#define MIPI_DSI_TOP_SUSPEND_CNTL                  0x3cc
+#define MIPI_DSI_TOP_SUSPEND_LINE                  0x3d0
+#define MIPI_DSI_TOP_SUSPEND_PIX                   0x3d4
+#define MIPI_DSI_TOP_MEAS_CNTL                     0x3d8
+/* [0] R  stat_edpihalt:  edpihalt signal from IP.    Default 0. */
+#define MIPI_DSI_TOP_STAT                          0x3dc
+#define MIPI_DSI_TOP_MEAS_STAT_TE0                 0x3e0
+#define MIPI_DSI_TOP_MEAS_STAT_TE1                 0x3e4
+#define MIPI_DSI_TOP_MEAS_STAT_VS0                 0x3e8
+#define MIPI_DSI_TOP_MEAS_STAT_VS1                 0x3ec
+/* [31:16] RW intr_stat/clr. Default 0.
+ *		For each bit, read as this interrupt level status,
+ *		write 1 to clear.
+ * [31:22] Reserved
+ * [   21] stat/clr of eof interrupt
+ * [   21] vde_fall interrupt
+ * [   19] stat/clr of de_rise interrupt
+ * [   18] stat/clr of vs_fall interrupt
+ * [   17] stat/clr of vs_rise interrupt
+ * [   16] stat/clr of dwc_edpite interrupt
+ * [15: 0] RW intr_enable. Default 0.
+ *		For each bit, 1=enable this interrupt, 0=disable.
+ *	[15: 6] Reserved
+ *	[    5] eof interrupt
+ *	[    4] de_fall interrupt
+ *	[    3] de_rise interrupt
+ *	[    2] vs_fall interrupt
+ *	[    1] vs_rise interrupt
+ *	[    0] dwc_edpite interrupt
+ */
+#define MIPI_DSI_TOP_INTR_CNTL_STAT                0x3f0
+// 31: 2    Reserved.   Default 0.
+//  1: 0 RW mem_pd.     Default 3.
+#define MIPI_DSI_TOP_MEM_PD                        0x3f4
+
+#endif /* __MESON_DW_MIPI_DSI_H */
