@@ -1529,11 +1529,6 @@ ltdc: display-controller@5a001000 {
clock-names = "lcd";
resets = <&rcc LTDC_R>;
status = "disabled";
-
- port {
- #address-cells = <1>;
- #size-cells = <0>;
- };
};
iwdg2: watchdog@5a002000 {
@@ -24,14 +24,7 @@ dsi: dsi@5a000000 {
clock-names = "pclk", "ref", "px_clk";
resets = <&rcc DSI_R>;
reset-names = "apb";
- #address-cells = <1>;
- #size-cells = <0>;
status = "disabled";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
- };
};
};
};
@@ -49,6 +49,9 @@ &dsi {
phy-dsi-supply = <®18>;
ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
port@0 {
reg = <0>;
dsi_in: endpoint {
@@ -104,8 +107,7 @@ <dc {
status = "okay";
port {
- ltdc_ep0_out: endpoint@0 {
- reg = <0>;
+ ltdc_ep0_out: endpoint {
remote-endpoint = <&dsi_in>;
};
};
@@ -49,6 +49,9 @@ &dsi {
phy-dsi-supply = <®18>;
ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
port@0 {
reg = <0>;
dsi_in_ltdc: endpoint {
@@ -104,8 +107,7 @@ <dc {
status = "okay";
port {
- ltdc_out_dsi: endpoint@0 {
- reg = <0>;
+ ltdc_out_dsi: endpoint {
remote-endpoint = <&dsi_in_ltdc>;
};
};
@@ -81,8 +81,7 @@ <dc {
status = "okay";
port {
- ltdc_ep0_out: endpoint@0 {
- reg = <0>;
+ ltdc_ep0_out: endpoint {
remote-endpoint = <&panel_in>;
};
};
@@ -31,10 +31,15 @@ &cryp1 {
};
&dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "okay";
phy-dsi-supply = <®18>;
ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
port@0 {
reg = <0>;
dsi_in: endpoint {
@@ -82,6 +87,9 @@ <dc {
status = "okay";
port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
ltdc_ep1_out: endpoint@1 {
reg = <1>;
remote-endpoint = <&dsi_in>;
@@ -101,9 +101,14 @@ dcmi_0: endpoint {
&dsi {
phy-dsi-supply = <®18>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "okay";
ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
port@0 {
reg = <0>;
dsi_in: endpoint {
@@ -119,7 +124,7 @@ dsi_out: endpoint {
};
};
- panel-dsi@0 {
+ panel@0 {
compatible = "raydium,rm68200";
reg = <0>;
reset-gpios = <&gpiof 15 GPIO_ACTIVE_LOW>;
@@ -239,8 +244,7 @@ <dc {
status = "okay";
port {
- ltdc_ep0_out: endpoint@0 {
- reg = <0>;
+ ltdc_ep0_out: endpoint {
remote-endpoint = <&dsi_in>;
};
};
@@ -161,8 +161,7 @@ <dc {
status = "okay";
port {
- ltdc_ep0_out: endpoint@0 {
- reg = <0>;
+ ltdc_ep0_out: endpoint {
remote-endpoint = <&panel_input>;
};
};
@@ -336,11 +336,7 @@ <dc {
status = "okay";
port {
- #address-cells = <1>;
- #size-cells = <0>;
-
- ltdc_ep0_out: endpoint@0 {
- reg = <0>;
+ ltdc_ep0_out: endpoint {
remote-endpoint = <&adv7513_in>;
};
};
@@ -457,8 +457,7 @@ <dc {
status = "okay";
port {
- ltdc_ep0_out: endpoint@0 {
- reg = <0>;
+ ltdc_ep0_out: endpoint {
remote-endpoint = <&sii9022_in>;
};
};
Several warnings regarding LTDC and DSI on stm32mp15* device-trees remains. Those concern: * "#size-cells" and "#address-cells" wrongly used * residual "reg" property appearing on endpoints where it could be avoided * Changed 'panel-dsi@0' to 'panel@0' according to st,stm32-dsi.yaml Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com> --- arch/arm/boot/dts/stm32mp151.dtsi | 5 ----- arch/arm/boot/dts/stm32mp157.dtsi | 7 ------- .../dts/stm32mp157a-icore-stm32mp1-ctouch2-of10.dts | 6 ++++-- .../boot/dts/stm32mp157a-icore-stm32mp1-edimm2.2.dts | 6 ++++-- .../stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts | 3 +-- arch/arm/boot/dts/stm32mp157c-dk2.dts | 8 ++++++++ arch/arm/boot/dts/stm32mp157c-ev1.dts | 10 +++++++--- arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts | 3 +-- arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi | 6 +----- arch/arm/boot/dts/stm32mp15xx-dkx.dtsi | 3 +-- 10 files changed, 27 insertions(+), 30 deletions(-)