diff mbox series

[v3,1/3] ARM: dts: stm32: fix warnings on stm32f469-disco board

Message ID 20230517143542.284029-2-raphael.gallais-pou@foss.st.com (mailing list archive)
State New, archived
Headers show
Series STM32 warning cleanup | expand

Commit Message

Raphael Gallais-Pou May 17, 2023, 2:35 p.m. UTC 
Several warnings appear when building and checking stm32f429 device-tree:

arch/arm/boot/dts/stm32f469-disco.dts:182.28-184.5: Warning (unit_address_vs_reg):
/soc/display-controller@40016800/port/endpoint@0: node has a unit name, but no reg or ranges property

.../arch/arm/boot/dts/stm32f469-disco.dtb: dsi@40016c00: Unevaluated properties are not allowed ('panel-dsi@0' was unexpected)
	From schema: .../Documentation/devicetree/bindings/display/st,stm32-dsi.yaml

Fix those.

Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
---
 arch/arm/boot/dts/stm32f469-disco.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Comments

Marek Vasut May 26, 2023, 4:55 p.m. UTC | #1 
On 5/17/23 16:35, Raphael Gallais-Pou wrote:
> Several warnings appear when building and checking stm32f429 device-tree:
> 
> arch/arm/boot/dts/stm32f469-disco.dts:182.28-184.5: Warning (unit_address_vs_reg):
> /soc/display-controller@40016800/port/endpoint@0: node has a unit name, but no reg or ranges property
> 
> .../arch/arm/boot/dts/stm32f469-disco.dtb: dsi@40016c00: Unevaluated properties are not allowed ('panel-dsi@0' was unexpected)
> 	From schema: .../Documentation/devicetree/bindings/display/st,stm32-dsi.yaml
> 
> Fix those.
> 
> Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>

Reviewed-by: Marek Vasut <marex@denx.de>
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/stm32f469-disco.dts b/arch/arm/boot/dts/stm32f469-disco.dts
index 5a0daf8e8b11..cbbd521bf010 100644
--- a/arch/arm/boot/dts/stm32f469-disco.dts
+++ b/arch/arm/boot/dts/stm32f469-disco.dts
@@ -160,7 +160,7 @@  dsi_out: endpoint {
 		};
 	};
 
-	panel-dsi@0 {
+	panel@0 {
 		compatible = "orisetech,otm8009a";
 		reg = <0>; /* dsi virtual channel (0..3) */
 		reset-gpios = <&gpioh 7 GPIO_ACTIVE_LOW>;
@@ -179,7 +179,7 @@  &ltdc {
 	status = "okay";
 
 	port {
-		ltdc_out_dsi: endpoint@0 {
+		ltdc_out_dsi: endpoint {
 			remote-endpoint = <&dsi_in>;
 		};
 	};