| Message ID | 20230616065757.1054422-2-evan.quan@amd.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Support Wifi RFI interference mitigation feature | expand |
On 6/16/23 01:57, Evan Quan wrote: > From: Mario Limonciello <mario.limonciello@amd.com> > > Due to electrical and mechanical constraints in certain platform designs > there may be likely interference of relatively high-powered harmonics of > the (G-)DDR memory clocks with local radio module frequency bands used > by Wifi 6/6e/7. > > To mitigate this, AMD has introduced an ACPI based mechanism that > devices can use to notify active use of particular frequencies so > that devices can make relative internal adjustments as necessary > to avoid this resonance. > > In order for a device to support this, the expected flow for device > driver or subsystems: > > Drivers/subsystems contributing frequencies: > > 1) During probe, check `wbrf_supported_producer` to see if WBRF supported > for the device. > 2) If adding frequencies, then call `wbrf_add_exclusion` with the > start and end ranges of the frequencies. > 3) If removing frequencies, then call `wbrf_remove_exclusion` with > start and end ranges of the frequencies. > > Drivers/subsystems responding to frequencies: > > 1) During probe, check `wbrf_supported_consumer` to see if WBRF is supported > for the device. > 2) Call the `wbrf_retrieve_exclusions` to retrieve the current > exclusions on receiving an ACPI notification for a new frequency > change. > > Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> > Co-developed-by: Evan Quan <evan.quan@amd.com> > Signed-off-by: Evan Quan <evan.quan@amd.com> > -- > v1->v2: > - move those wlan specific implementations to net/mac80211(Mario) > --- > drivers/acpi/Kconfig | 7 ++ > drivers/acpi/Makefile | 2 + > drivers/acpi/acpi_wbrf.c | 215 +++++++++++++++++++++++++++++++++++++++ > include/linux/wbrf.h | 55 ++++++++++ > 4 files changed, 279 insertions(+) > create mode 100644 drivers/acpi/acpi_wbrf.c > create mode 100644 include/linux/wbrf.h > > diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig > index ccbeab9500ec..9ee7c7dcc3e6 100644 > --- a/drivers/acpi/Kconfig > +++ b/drivers/acpi/Kconfig > @@ -611,3 +611,10 @@ config X86_PM_TIMER > > You should nearly always say Y here because many modern > systems require this timer. > + > +config ACPI_WBRF > + bool "ACPI Wifi band RF mitigation mechanism" > + help > + Wifi band RF mitigation mechanism allows multiple drivers from > + different domains to notify the frequencies in use so that hardware > + can be reconfigured to avoid harmonic conflicts. > \ No newline at end of file There should be a newline at the end of the Kconfig file. > diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile > index feb36c0b9446..be173e76aa62 100644 > --- a/drivers/acpi/Makefile > +++ b/drivers/acpi/Makefile > @@ -131,3 +131,5 @@ obj-y += dptf/ > obj-$(CONFIG_ARM64) += arm64/ > > obj-$(CONFIG_ACPI_VIOT) += viot.o > + > +obj-$(CONFIG_ACPI_WBRF) += acpi_wbrf.o > \ No newline at end of file > diff --git a/drivers/acpi/acpi_wbrf.c b/drivers/acpi/acpi_wbrf.c > new file mode 100644 > index 000000000000..8c275998ac29 > --- /dev/null > +++ b/drivers/acpi/acpi_wbrf.c > @@ -0,0 +1,215 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * AMD Wifi Band Exclusion Interface > + * Copyright (C) 2023 Advanced Micro Devices > + * > + */ > + > +#include <linux/wbrf.h> > + > +/* functions */ > +#define WBRF_RECORD 0x1 > +#define WBRF_RETRIEVE 0x2 > + > +/* record actions */ > +#define WBRF_RECORD_ADD 0x0 > +#define WBRF_RECORD_REMOVE 0x1 > + > +#define WBRF_REVISION 0x1 > + > +static const guid_t wifi_acpi_dsm_guid = > + GUID_INIT(0x7b7656cf, 0xdc3d, 0x4c1c, > + 0x83, 0xe9, 0x66, 0xe7, 0x21, 0xde, 0x30, 0x70); > + > +static int wbrf_dsm(struct acpi_device *adev, u8 fn, > + union acpi_object *argv4, > + union acpi_object **out) > +{ > + union acpi_object *obj; > + int rc; > + > + obj = acpi_evaluate_dsm(adev->handle, &wifi_acpi_dsm_guid, > + WBRF_REVISION, fn, argv4); > + if (!obj) > + return -ENXIO; > + > + switch (obj->type) { > + case ACPI_TYPE_BUFFER: > + if (!*out) { > + rc = -EINVAL; > + break; > + } > + *out = obj; > + return 0; > + > + case ACPI_TYPE_INTEGER: > + rc = obj->integer.value ? -EINVAL : 0; > + break; > + default: > + rc = -EOPNOTSUPP; > + } > + ACPI_FREE(obj); > + > + return rc; > +} > + > +static int wbrf_record(struct acpi_device *adev, uint8_t action, > + struct wbrf_ranges_in *in) > +{ > + union acpi_object *argv4; > + uint32_t num_of_ranges = 0; > + uint32_t arg_idx = 0; > + uint32_t loop_idx; > + int ret; > + > + if (!in) > + return -EINVAL; > + > + for (loop_idx = 0; loop_idx < ARRAY_SIZE(in->band_list); > + loop_idx++) > + if (in->band_list[loop_idx].start && > + in->band_list[loop_idx].end) > + num_of_ranges++; > + > + argv4 = kzalloc(sizeof(*argv4) * (2 * num_of_ranges + 2 + 1), GFP_KERNEL); > + if (!argv4) > + return -ENOMEM; > + > + argv4[arg_idx].package.type = ACPI_TYPE_PACKAGE; > + argv4[arg_idx].package.count = 2 + 2 * num_of_ranges; > + argv4[arg_idx++].package.elements = &argv4[1]; > + argv4[arg_idx].integer.type = ACPI_TYPE_INTEGER; > + argv4[arg_idx++].integer.value = num_of_ranges; > + argv4[arg_idx].integer.type = ACPI_TYPE_INTEGER; > + argv4[arg_idx++].integer.value = action; > + > + for (loop_idx = 0; loop_idx < ARRAY_SIZE(in->band_list); > + loop_idx++) { > + if (!in->band_list[loop_idx].start || > + !in->band_list[loop_idx].end) > + continue; > + > + argv4[arg_idx].integer.type = ACPI_TYPE_INTEGER; > + argv4[arg_idx++].integer.value = in->band_list[loop_idx].start; > + argv4[arg_idx].integer.type = ACPI_TYPE_INTEGER; > + argv4[arg_idx++].integer.value = in->band_list[loop_idx].end; > + } > + > + ret = wbrf_dsm(adev, WBRF_RECORD, argv4, NULL); > + > + kfree(argv4); > + > + return ret; > +} > + > +int wbrf_add_exclusion(struct acpi_device *adev, > + struct wbrf_ranges_in *in) > +{ > + return wbrf_record(adev, WBRF_RECORD_ADD, in); > +} > +EXPORT_SYMBOL_GPL(wbrf_add_exclusion); > + > +int wbrf_remove_exclusion(struct acpi_device *adev, > + struct wbrf_ranges_in *in) > +{ > + return wbrf_record(adev, WBRF_RECORD_REMOVE, in); > +} > +EXPORT_SYMBOL_GPL(wbrf_remove_exclusion); > + > +bool wbrf_supported_producer(struct acpi_device *adev) > +{ > + return acpi_check_dsm(adev->handle, &wifi_acpi_dsm_guid, > + WBRF_REVISION, > + (1ULL << WBRF_RECORD) | (1ULL << WBRF_RETRIEVE)); > +} > +EXPORT_SYMBOL_GPL(wbrf_supported_producer); > + > +static union acpi_object * > +acpi_evaluate_wbrf(acpi_handle handle, u64 rev, u64 func) > +{ > + acpi_status ret; > + struct acpi_buffer buf = {ACPI_ALLOCATE_BUFFER, NULL}; > + union acpi_object params[4]; > + struct acpi_object_list input = { > + .count = 4, > + .pointer = params, > + }; > + > + params[0].type = ACPI_TYPE_INTEGER; > + params[0].integer.value = rev; > + params[1].type = ACPI_TYPE_INTEGER; > + params[1].integer.value = func; > + params[2].type = ACPI_TYPE_PACKAGE; > + params[2].package.count = 0; > + params[2].package.elements = NULL; > + params[3].type = ACPI_TYPE_STRING; > + params[3].string.length = 0; > + params[3].string.pointer= NULL; > + > + ret = acpi_evaluate_object(handle, "WBRF", &input, &buf); > + if (ACPI_SUCCESS(ret)) > + return (union acpi_object *)buf.pointer; > + > + if (ret != AE_NOT_FOUND) > + acpi_handle_warn(handle, > + "failed to evaluate WBRF(0x%x)\n", ret); > + > + return NULL; > +} > + > +static bool check_acpi_wbrf(acpi_handle handle, u64 rev, u64 funcs) > +{ > + int i; > + u64 mask = 0; > + union acpi_object *obj; > + > + if (funcs == 0) > + return false; > + > + obj = acpi_evaluate_wbrf(handle, rev, 0); > + if (!obj) > + return false; > + > + if (obj->type != ACPI_TYPE_BUFFER) > + return false; > + > + for (i = 0; i < obj->buffer.length && i < 8; i++) > + mask |= (((u64)obj->buffer.pointer[i]) << (i * 8)); > + ACPI_FREE(obj); > + > + /* > + * Bit 0 indicates whether there's support for any functions other than > + * function 0. > + */ > + if ((mask & 0x1) && (mask & funcs) == funcs) > + return true; > + > + return false; > +} > + > +bool wbrf_supported_consumer(struct acpi_device *adev) > +{ > + return check_acpi_wbrf(adev->handle, > + WBRF_REVISION, > + 1ULL << WBRF_RETRIEVE); > +} > +EXPORT_SYMBOL_GPL(wbrf_supported_consumer); > + > +int wbrf_retrieve_exclusions(struct acpi_device *adev, > + struct wbrf_ranges_out *exclusions_out) > +{ > + union acpi_object *obj; > + > + obj = acpi_evaluate_wbrf(adev->handle, > + WBRF_REVISION, > + WBRF_RETRIEVE); > + if (!obj) > + return -EINVAL; > + > + memcpy(exclusions_out, obj->buffer.pointer, obj->buffer.length); > + > + ACPI_FREE(obj); > + > + return 0; > +} > +EXPORT_SYMBOL_GPL(wbrf_retrieve_exclusions); > diff --git a/include/linux/wbrf.h b/include/linux/wbrf.h > new file mode 100644 > index 000000000000..e4c99b69f1d2 > --- /dev/null > +++ b/include/linux/wbrf.h > @@ -0,0 +1,55 @@ > +/* SPDX-License-Identifier: GPL-2.0 */ > +/* > + * AMD Wifi Band Exclusion Interface > + * Copyright (C) 2023 Advanced Micro Devices > + */ > + > +#ifndef _LINUX_WBRF_H > +#define _LINUX_WBRF_H > + > +#include <linux/acpi.h> > + > +/* Maximum number of wbrf ranges */ > +#define MAX_NUM_OF_WBRF_RANGES 11 > + > +struct exclusion_range { > + /* start and end point of the frequency range in Hz */ > + uint64_t start; > + uint64_t end; > +}; > + > +struct wbrf_ranges_in { > + /* valid entry: `start` and `end` filled with non-zero values */ > + struct exclusion_range band_list[MAX_NUM_OF_WBRF_RANGES]; > +}; > + > +struct wbrf_ranges_out { > + uint32_t num_of_ranges; > + struct exclusion_range band_list[MAX_NUM_OF_WBRF_RANGES]; > +} __attribute__((packed)); > + > +/** > + * APIs needed by drivers/subsystems for contributing frequencies: > + * During probe, check `wbrf_supported_producer` to see if WBRF is supported. > + * If adding frequencies, then call `wbrf_add_exclusion` with the > + * start and end points specified for the frequency ranges added. > + * If removing frequencies, then call `wbrf_remove_exclusion` with > + * start and end points specified for the frequency ranges added. > + */ > +bool wbrf_supported_producer(struct acpi_device *adev); > +int wbrf_add_exclusion(struct acpi_device *adev, > + struct wbrf_ranges_in *in); > +int wbrf_remove_exclusion(struct acpi_device *adev, > + struct wbrf_ranges_in *in); > + > +/** > + * APIs needed by drivers/subsystems responding to frequencies: > + * During probe, check `wbrf_supported_consumer` to see if WBRF is supported. > + * When receiving an ACPI notification for some frequencies change, run > + * `wbrf_retrieve_exclusions` to retrieve the latest frequencies ranges. > + */ > +int wbrf_retrieve_exclusions(struct acpi_device *adev, > + struct wbrf_ranges_out *out); > +bool wbrf_supported_consumer(struct acpi_device *adev); > + > +#endif /* _LINUX_WBRF_H */
[AMD Official Use Only - General] > -----Original Message----- > From: Limonciello, Mario <Mario.Limonciello@amd.com> > Sent: Monday, June 19, 2023 10:04 AM > To: Quan, Evan <Evan.Quan@amd.com> > Cc: linux-kernel@vger.kernel.org; linux-acpi@vger.kernel.org; amd- > gfx@lists.freedesktop.org; dri-devel@lists.freedesktop.org; linux- > wireless@vger.kernel.org; rafael@kernel.org; lenb@kernel.org; Deucher, > Alexander <Alexander.Deucher@amd.com>; Koenig, Christian > <Christian.Koenig@amd.com>; Pan, Xinhui <Xinhui.Pan@amd.com>; > airlied@gmail.com; daniel@ffwll.ch; kvalo@kernel.org; nbd@nbd.name; > lorenzo@kernel.org; ryder.lee@mediatek.com; shayne.chen@mediatek.com; > sean.wang@mediatek.com; matthias.bgg@gmail.com; > angelogioacchino.delregno@collabora.com; Lazar, Lijo <Lijo.Lazar@amd.com> > Subject: Re: [PATCH V3 1/7] drivers/acpi: Add support for Wifi band RF > mitigations > > On 6/16/23 01:57, Evan Quan wrote: > > From: Mario Limonciello <mario.limonciello@amd.com> > > > > Due to electrical and mechanical constraints in certain platform > > designs there may be likely interference of relatively high-powered > > harmonics of the (G-)DDR memory clocks with local radio module > > frequency bands used by Wifi 6/6e/7. > > > > To mitigate this, AMD has introduced an ACPI based mechanism that > > devices can use to notify active use of particular frequencies so that > > devices can make relative internal adjustments as necessary to avoid > > this resonance. > > > > In order for a device to support this, the expected flow for device > > driver or subsystems: > > > > Drivers/subsystems contributing frequencies: > > > > 1) During probe, check `wbrf_supported_producer` to see if WBRF > supported > > for the device. > > 2) If adding frequencies, then call `wbrf_add_exclusion` with the > > start and end ranges of the frequencies. > > 3) If removing frequencies, then call `wbrf_remove_exclusion` with > > start and end ranges of the frequencies. > > > > Drivers/subsystems responding to frequencies: > > > > 1) During probe, check `wbrf_supported_consumer` to see if WBRF is > supported > > for the device. > > 2) Call the `wbrf_retrieve_exclusions` to retrieve the current > > exclusions on receiving an ACPI notification for a new frequency > > change. > > > > Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> > > Co-developed-by: Evan Quan <evan.quan@amd.com> > > Signed-off-by: Evan Quan <evan.quan@amd.com> > > -- > > v1->v2: > > - move those wlan specific implementations to net/mac80211(Mario) > > --- > > drivers/acpi/Kconfig | 7 ++ > > drivers/acpi/Makefile | 2 + > > drivers/acpi/acpi_wbrf.c | 215 > +++++++++++++++++++++++++++++++++++++++ > > include/linux/wbrf.h | 55 ++++++++++ > > 4 files changed, 279 insertions(+) > > create mode 100644 drivers/acpi/acpi_wbrf.c > > create mode 100644 include/linux/wbrf.h > > > > diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index > > ccbeab9500ec..9ee7c7dcc3e6 100644 > > --- a/drivers/acpi/Kconfig > > +++ b/drivers/acpi/Kconfig > > @@ -611,3 +611,10 @@ config X86_PM_TIMER > > > > You should nearly always say Y here because many modern > > systems require this timer. > > + > > +config ACPI_WBRF > > + bool "ACPI Wifi band RF mitigation mechanism" > > + help > > + Wifi band RF mitigation mechanism allows multiple drivers from > > + different domains to notify the frequencies in use so that hardware > > + can be reconfigured to avoid harmonic conflicts. > > \ No newline at end of file > > There should be a newline at the end of the Kconfig file. OK, will add that. Evan > > > diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile index > > feb36c0b9446..be173e76aa62 100644 > > --- a/drivers/acpi/Makefile > > +++ b/drivers/acpi/Makefile > > @@ -131,3 +131,5 @@ obj-y += dptf/ > > obj-$(CONFIG_ARM64) += arm64/ > > > > obj-$(CONFIG_ACPI_VIOT) += viot.o > > + > > +obj-$(CONFIG_ACPI_WBRF) += acpi_wbrf.o > > \ No newline at end of file > > diff --git a/drivers/acpi/acpi_wbrf.c b/drivers/acpi/acpi_wbrf.c new > > file mode 100644 index 000000000000..8c275998ac29 > > --- /dev/null > > +++ b/drivers/acpi/acpi_wbrf.c > > @@ -0,0 +1,215 @@ > > +// SPDX-License-Identifier: GPL-2.0 > > +/* > > + * AMD Wifi Band Exclusion Interface > > + * Copyright (C) 2023 Advanced Micro Devices > > + * > > + */ > > + > > +#include <linux/wbrf.h> > > + > > +/* functions */ > > +#define WBRF_RECORD 0x1 > > +#define WBRF_RETRIEVE 0x2 > > + > > +/* record actions */ > > +#define WBRF_RECORD_ADD 0x0 > > +#define WBRF_RECORD_REMOVE 0x1 > > + > > +#define WBRF_REVISION 0x1 > > + > > +static const guid_t wifi_acpi_dsm_guid = > > + GUID_INIT(0x7b7656cf, 0xdc3d, 0x4c1c, > > + 0x83, 0xe9, 0x66, 0xe7, 0x21, 0xde, 0x30, 0x70); > > + > > +static int wbrf_dsm(struct acpi_device *adev, u8 fn, > > + union acpi_object *argv4, > > + union acpi_object **out) > > +{ > > + union acpi_object *obj; > > + int rc; > > + > > + obj = acpi_evaluate_dsm(adev->handle, &wifi_acpi_dsm_guid, > > + WBRF_REVISION, fn, argv4); > > + if (!obj) > > + return -ENXIO; > > + > > + switch (obj->type) { > > + case ACPI_TYPE_BUFFER: > > + if (!*out) { > > + rc = -EINVAL; > > + break; > > + } > > + *out = obj; > > + return 0; > > + > > + case ACPI_TYPE_INTEGER: > > + rc = obj->integer.value ? -EINVAL : 0; > > + break; > > + default: > > + rc = -EOPNOTSUPP; > > + } > > + ACPI_FREE(obj); > > + > > + return rc; > > +} > > + > > +static int wbrf_record(struct acpi_device *adev, uint8_t action, > > + struct wbrf_ranges_in *in) > > +{ > > + union acpi_object *argv4; > > + uint32_t num_of_ranges = 0; > > + uint32_t arg_idx = 0; > > + uint32_t loop_idx; > > + int ret; > > + > > + if (!in) > > + return -EINVAL; > > + > > + for (loop_idx = 0; loop_idx < ARRAY_SIZE(in->band_list); > > + loop_idx++) > > + if (in->band_list[loop_idx].start && > > + in->band_list[loop_idx].end) > > + num_of_ranges++; > > + > > + argv4 = kzalloc(sizeof(*argv4) * (2 * num_of_ranges + 2 + 1), > GFP_KERNEL); > > + if (!argv4) > > + return -ENOMEM; > > + > > + argv4[arg_idx].package.type = ACPI_TYPE_PACKAGE; > > + argv4[arg_idx].package.count = 2 + 2 * num_of_ranges; > > + argv4[arg_idx++].package.elements = &argv4[1]; > > + argv4[arg_idx].integer.type = ACPI_TYPE_INTEGER; > > + argv4[arg_idx++].integer.value = num_of_ranges; > > + argv4[arg_idx].integer.type = ACPI_TYPE_INTEGER; > > + argv4[arg_idx++].integer.value = action; > > + > > + for (loop_idx = 0; loop_idx < ARRAY_SIZE(in->band_list); > > + loop_idx++) { > > + if (!in->band_list[loop_idx].start || > > + !in->band_list[loop_idx].end) > > + continue; > > + > > + argv4[arg_idx].integer.type = ACPI_TYPE_INTEGER; > > + argv4[arg_idx++].integer.value = in->band_list[loop_idx].start; > > + argv4[arg_idx].integer.type = ACPI_TYPE_INTEGER; > > + argv4[arg_idx++].integer.value = in->band_list[loop_idx].end; > > + } > > + > > + ret = wbrf_dsm(adev, WBRF_RECORD, argv4, NULL); > > + > > + kfree(argv4); > > + > > + return ret; > > +} > > + > > +int wbrf_add_exclusion(struct acpi_device *adev, > > + struct wbrf_ranges_in *in) > > +{ > > + return wbrf_record(adev, WBRF_RECORD_ADD, in); } > > +EXPORT_SYMBOL_GPL(wbrf_add_exclusion); > > + > > +int wbrf_remove_exclusion(struct acpi_device *adev, > > + struct wbrf_ranges_in *in) > > +{ > > + return wbrf_record(adev, WBRF_RECORD_REMOVE, in); } > > +EXPORT_SYMBOL_GPL(wbrf_remove_exclusion); > > + > > +bool wbrf_supported_producer(struct acpi_device *adev) { > > + return acpi_check_dsm(adev->handle, &wifi_acpi_dsm_guid, > > + WBRF_REVISION, > > + (1ULL << WBRF_RECORD) | (1ULL << > WBRF_RETRIEVE)); } > > +EXPORT_SYMBOL_GPL(wbrf_supported_producer); > > + > > +static union acpi_object * > > +acpi_evaluate_wbrf(acpi_handle handle, u64 rev, u64 func) { > > + acpi_status ret; > > + struct acpi_buffer buf = {ACPI_ALLOCATE_BUFFER, NULL}; > > + union acpi_object params[4]; > > + struct acpi_object_list input = { > > + .count = 4, > > + .pointer = params, > > + }; > > + > > + params[0].type = ACPI_TYPE_INTEGER; > > + params[0].integer.value = rev; > > + params[1].type = ACPI_TYPE_INTEGER; > > + params[1].integer.value = func; > > + params[2].type = ACPI_TYPE_PACKAGE; > > + params[2].package.count = 0; > > + params[2].package.elements = NULL; > > + params[3].type = ACPI_TYPE_STRING; > > + params[3].string.length = 0; > > + params[3].string.pointer= NULL; > > + > > + ret = acpi_evaluate_object(handle, "WBRF", &input, &buf); > > + if (ACPI_SUCCESS(ret)) > > + return (union acpi_object *)buf.pointer; > > + > > + if (ret != AE_NOT_FOUND) > > + acpi_handle_warn(handle, > > + "failed to evaluate WBRF(0x%x)\n", ret); > > + > > + return NULL; > > +} > > + > > +static bool check_acpi_wbrf(acpi_handle handle, u64 rev, u64 funcs) { > > + int i; > > + u64 mask = 0; > > + union acpi_object *obj; > > + > > + if (funcs == 0) > > + return false; > > + > > + obj = acpi_evaluate_wbrf(handle, rev, 0); > > + if (!obj) > > + return false; > > + > > + if (obj->type != ACPI_TYPE_BUFFER) > > + return false; > > + > > + for (i = 0; i < obj->buffer.length && i < 8; i++) > > + mask |= (((u64)obj->buffer.pointer[i]) << (i * 8)); > > + ACPI_FREE(obj); > > + > > + /* > > + * Bit 0 indicates whether there's support for any functions other than > > + * function 0. > > + */ > > + if ((mask & 0x1) && (mask & funcs) == funcs) > > + return true; > > + > > + return false; > > +} > > + > > +bool wbrf_supported_consumer(struct acpi_device *adev) { > > + return check_acpi_wbrf(adev->handle, > > + WBRF_REVISION, > > + 1ULL << WBRF_RETRIEVE); > > +} > > +EXPORT_SYMBOL_GPL(wbrf_supported_consumer); > > + > > +int wbrf_retrieve_exclusions(struct acpi_device *adev, > > + struct wbrf_ranges_out *exclusions_out) { > > + union acpi_object *obj; > > + > > + obj = acpi_evaluate_wbrf(adev->handle, > > + WBRF_REVISION, > > + WBRF_RETRIEVE); > > + if (!obj) > > + return -EINVAL; > > + > > + memcpy(exclusions_out, obj->buffer.pointer, obj->buffer.length); > > + > > + ACPI_FREE(obj); > > + > > + return 0; > > +} > > +EXPORT_SYMBOL_GPL(wbrf_retrieve_exclusions); > > diff --git a/include/linux/wbrf.h b/include/linux/wbrf.h new file mode > > 100644 index 000000000000..e4c99b69f1d2 > > --- /dev/null > > +++ b/include/linux/wbrf.h > > @@ -0,0 +1,55 @@ > > +/* SPDX-License-Identifier: GPL-2.0 */ > > +/* > > + * AMD Wifi Band Exclusion Interface > > + * Copyright (C) 2023 Advanced Micro Devices */ > > + > > +#ifndef _LINUX_WBRF_H > > +#define _LINUX_WBRF_H > > + > > +#include <linux/acpi.h> > > + > > +/* Maximum number of wbrf ranges */ > > +#define MAX_NUM_OF_WBRF_RANGES 11 > + > > +struct exclusion_range { > > + /* start and end point of the frequency range in Hz */ > > + uint64_t start; > > + uint64_t end; > > +}; > > + > > +struct wbrf_ranges_in { > > + /* valid entry: `start` and `end` filled with non-zero values */ > > + struct exclusion_range band_list[MAX_NUM_OF_WBRF_RANGES]; > > +}; > > + > > +struct wbrf_ranges_out { > > + uint32_t num_of_ranges; > > + struct exclusion_range band_list[MAX_NUM_OF_WBRF_RANGES]; > > +} __attribute__((packed)); > > + > > +/** > > + * APIs needed by drivers/subsystems for contributing frequencies: > > + * During probe, check `wbrf_supported_producer` to see if WBRF is > supported. > > + * If adding frequencies, then call `wbrf_add_exclusion` with the > > + * start and end points specified for the frequency ranges added. > > + * If removing frequencies, then call `wbrf_remove_exclusion` with > > + * start and end points specified for the frequency ranges added. > > + */ > > +bool wbrf_supported_producer(struct acpi_device *adev); int > > +wbrf_add_exclusion(struct acpi_device *adev, > > + struct wbrf_ranges_in *in); > > +int wbrf_remove_exclusion(struct acpi_device *adev, > > + struct wbrf_ranges_in *in); > > + > > +/** > > + * APIs needed by drivers/subsystems responding to frequencies: > > + * During probe, check `wbrf_supported_consumer` to see if WBRF is > supported. > > + * When receiving an ACPI notification for some frequencies change, > > +run > > + * `wbrf_retrieve_exclusions` to retrieve the latest frequencies ranges. > > + */ > > +int wbrf_retrieve_exclusions(struct acpi_device *adev, > > + struct wbrf_ranges_out *out); bool > > +wbrf_supported_consumer(struct acpi_device *adev); > > + > > +#endif /* _LINUX_WBRF_H */
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index ccbeab9500ec..9ee7c7dcc3e6 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -611,3 +611,10 @@ config X86_PM_TIMER You should nearly always say Y here because many modern systems require this timer. + +config ACPI_WBRF + bool "ACPI Wifi band RF mitigation mechanism" + help + Wifi band RF mitigation mechanism allows multiple drivers from + different domains to notify the frequencies in use so that hardware + can be reconfigured to avoid harmonic conflicts. \ No newline at end of file diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile index feb36c0b9446..be173e76aa62 100644 --- a/drivers/acpi/Makefile +++ b/drivers/acpi/Makefile @@ -131,3 +131,5 @@ obj-y += dptf/ obj-$(CONFIG_ARM64) += arm64/ obj-$(CONFIG_ACPI_VIOT) += viot.o + +obj-$(CONFIG_ACPI_WBRF) += acpi_wbrf.o \ No newline at end of file diff --git a/drivers/acpi/acpi_wbrf.c b/drivers/acpi/acpi_wbrf.c new file mode 100644 index 000000000000..8c275998ac29 --- /dev/null +++ b/drivers/acpi/acpi_wbrf.c @@ -0,0 +1,215 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * AMD Wifi Band Exclusion Interface + * Copyright (C) 2023 Advanced Micro Devices + * + */ + +#include <linux/wbrf.h> + +/* functions */ +#define WBRF_RECORD 0x1 +#define WBRF_RETRIEVE 0x2 + +/* record actions */ +#define WBRF_RECORD_ADD 0x0 +#define WBRF_RECORD_REMOVE 0x1 + +#define WBRF_REVISION 0x1 + +static const guid_t wifi_acpi_dsm_guid = + GUID_INIT(0x7b7656cf, 0xdc3d, 0x4c1c, + 0x83, 0xe9, 0x66, 0xe7, 0x21, 0xde, 0x30, 0x70); + +static int wbrf_dsm(struct acpi_device *adev, u8 fn, + union acpi_object *argv4, + union acpi_object **out) +{ + union acpi_object *obj; + int rc; + + obj = acpi_evaluate_dsm(adev->handle, &wifi_acpi_dsm_guid, + WBRF_REVISION, fn, argv4); + if (!obj) + return -ENXIO; + + switch (obj->type) { + case ACPI_TYPE_BUFFER: + if (!*out) { + rc = -EINVAL; + break; + } + *out = obj; + return 0; + + case ACPI_TYPE_INTEGER: + rc = obj->integer.value ? -EINVAL : 0; + break; + default: + rc = -EOPNOTSUPP; + } + ACPI_FREE(obj); + + return rc; +} + +static int wbrf_record(struct acpi_device *adev, uint8_t action, + struct wbrf_ranges_in *in) +{ + union acpi_object *argv4; + uint32_t num_of_ranges = 0; + uint32_t arg_idx = 0; + uint32_t loop_idx; + int ret; + + if (!in) + return -EINVAL; + + for (loop_idx = 0; loop_idx < ARRAY_SIZE(in->band_list); + loop_idx++) + if (in->band_list[loop_idx].start && + in->band_list[loop_idx].end) + num_of_ranges++; + + argv4 = kzalloc(sizeof(*argv4) * (2 * num_of_ranges + 2 + 1), GFP_KERNEL); + if (!argv4) + return -ENOMEM; + + argv4[arg_idx].package.type = ACPI_TYPE_PACKAGE; + argv4[arg_idx].package.count = 2 + 2 * num_of_ranges; + argv4[arg_idx++].package.elements = &argv4[1]; + argv4[arg_idx].integer.type = ACPI_TYPE_INTEGER; + argv4[arg_idx++].integer.value = num_of_ranges; + argv4[arg_idx].integer.type = ACPI_TYPE_INTEGER; + argv4[arg_idx++].integer.value = action; + + for (loop_idx = 0; loop_idx < ARRAY_SIZE(in->band_list); + loop_idx++) { + if (!in->band_list[loop_idx].start || + !in->band_list[loop_idx].end) + continue; + + argv4[arg_idx].integer.type = ACPI_TYPE_INTEGER; + argv4[arg_idx++].integer.value = in->band_list[loop_idx].start; + argv4[arg_idx].integer.type = ACPI_TYPE_INTEGER; + argv4[arg_idx++].integer.value = in->band_list[loop_idx].end; + } + + ret = wbrf_dsm(adev, WBRF_RECORD, argv4, NULL); + + kfree(argv4); + + return ret; +} + +int wbrf_add_exclusion(struct acpi_device *adev, + struct wbrf_ranges_in *in) +{ + return wbrf_record(adev, WBRF_RECORD_ADD, in); +} +EXPORT_SYMBOL_GPL(wbrf_add_exclusion); + +int wbrf_remove_exclusion(struct acpi_device *adev, + struct wbrf_ranges_in *in) +{ + return wbrf_record(adev, WBRF_RECORD_REMOVE, in); +} +EXPORT_SYMBOL_GPL(wbrf_remove_exclusion); + +bool wbrf_supported_producer(struct acpi_device *adev) +{ + return acpi_check_dsm(adev->handle, &wifi_acpi_dsm_guid, + WBRF_REVISION, + (1ULL << WBRF_RECORD) | (1ULL << WBRF_RETRIEVE)); +} +EXPORT_SYMBOL_GPL(wbrf_supported_producer); + +static union acpi_object * +acpi_evaluate_wbrf(acpi_handle handle, u64 rev, u64 func) +{ + acpi_status ret; + struct acpi_buffer buf = {ACPI_ALLOCATE_BUFFER, NULL}; + union acpi_object params[4]; + struct acpi_object_list input = { + .count = 4, + .pointer = params, + }; + + params[0].type = ACPI_TYPE_INTEGER; + params[0].integer.value = rev; + params[1].type = ACPI_TYPE_INTEGER; + params[1].integer.value = func; + params[2].type = ACPI_TYPE_PACKAGE; + params[2].package.count = 0; + params[2].package.elements = NULL; + params[3].type = ACPI_TYPE_STRING; + params[3].string.length = 0; + params[3].string.pointer= NULL; + + ret = acpi_evaluate_object(handle, "WBRF", &input, &buf); + if (ACPI_SUCCESS(ret)) + return (union acpi_object *)buf.pointer; + + if (ret != AE_NOT_FOUND) + acpi_handle_warn(handle, + "failed to evaluate WBRF(0x%x)\n", ret); + + return NULL; +} + +static bool check_acpi_wbrf(acpi_handle handle, u64 rev, u64 funcs) +{ + int i; + u64 mask = 0; + union acpi_object *obj; + + if (funcs == 0) + return false; + + obj = acpi_evaluate_wbrf(handle, rev, 0); + if (!obj) + return false; + + if (obj->type != ACPI_TYPE_BUFFER) + return false; + + for (i = 0; i < obj->buffer.length && i < 8; i++) + mask |= (((u64)obj->buffer.pointer[i]) << (i * 8)); + ACPI_FREE(obj); + + /* + * Bit 0 indicates whether there's support for any functions other than + * function 0. + */ + if ((mask & 0x1) && (mask & funcs) == funcs) + return true; + + return false; +} + +bool wbrf_supported_consumer(struct acpi_device *adev) +{ + return check_acpi_wbrf(adev->handle, + WBRF_REVISION, + 1ULL << WBRF_RETRIEVE); +} +EXPORT_SYMBOL_GPL(wbrf_supported_consumer); + +int wbrf_retrieve_exclusions(struct acpi_device *adev, + struct wbrf_ranges_out *exclusions_out) +{ + union acpi_object *obj; + + obj = acpi_evaluate_wbrf(adev->handle, + WBRF_REVISION, + WBRF_RETRIEVE); + if (!obj) + return -EINVAL; + + memcpy(exclusions_out, obj->buffer.pointer, obj->buffer.length); + + ACPI_FREE(obj); + + return 0; +} +EXPORT_SYMBOL_GPL(wbrf_retrieve_exclusions); diff --git a/include/linux/wbrf.h b/include/linux/wbrf.h new file mode 100644 index 000000000000..e4c99b69f1d2 --- /dev/null +++ b/include/linux/wbrf.h @@ -0,0 +1,55 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * AMD Wifi Band Exclusion Interface + * Copyright (C) 2023 Advanced Micro Devices + */ + +#ifndef _LINUX_WBRF_H +#define _LINUX_WBRF_H + +#include <linux/acpi.h> + +/* Maximum number of wbrf ranges */ +#define MAX_NUM_OF_WBRF_RANGES 11 + +struct exclusion_range { + /* start and end point of the frequency range in Hz */ + uint64_t start; + uint64_t end; +}; + +struct wbrf_ranges_in { + /* valid entry: `start` and `end` filled with non-zero values */ + struct exclusion_range band_list[MAX_NUM_OF_WBRF_RANGES]; +}; + +struct wbrf_ranges_out { + uint32_t num_of_ranges; + struct exclusion_range band_list[MAX_NUM_OF_WBRF_RANGES]; +} __attribute__((packed)); + +/** + * APIs needed by drivers/subsystems for contributing frequencies: + * During probe, check `wbrf_supported_producer` to see if WBRF is supported. + * If adding frequencies, then call `wbrf_add_exclusion` with the + * start and end points specified for the frequency ranges added. + * If removing frequencies, then call `wbrf_remove_exclusion` with + * start and end points specified for the frequency ranges added. + */ +bool wbrf_supported_producer(struct acpi_device *adev); +int wbrf_add_exclusion(struct acpi_device *adev, + struct wbrf_ranges_in *in); +int wbrf_remove_exclusion(struct acpi_device *adev, + struct wbrf_ranges_in *in); + +/** + * APIs needed by drivers/subsystems responding to frequencies: + * During probe, check `wbrf_supported_consumer` to see if WBRF is supported. + * When receiving an ACPI notification for some frequencies change, run + * `wbrf_retrieve_exclusions` to retrieve the latest frequencies ranges. + */ +int wbrf_retrieve_exclusions(struct acpi_device *adev, + struct wbrf_ranges_out *out); +bool wbrf_supported_consumer(struct acpi_device *adev); + +#endif /* _LINUX_WBRF_H */