@@ -4,6 +4,7 @@
* Copyright (c) 2022 BayLibre
*/
+#include <drm/display/drm_dp_aux_bus.h>
#include <drm/display/drm_dp.h>
#include <drm/display/drm_dp_helper.h>
#include <drm/drm_atomic_helper.h>
@@ -2042,7 +2043,8 @@ static ssize_t mtk_dp_aux_transfer(struct drm_dp_aux *mtk_aux,
mtk_dp = container_of(mtk_aux, struct mtk_dp, aux);
- if (!mtk_dp->train_info.cable_plugged_in) {
+ if (mtk_dp->bridge.type != DRM_MODE_CONNECTOR_eDP &&
+ !mtk_dp->train_info.cable_plugged_in) {
ret = -EAGAIN;
goto err;
}
@@ -2153,6 +2155,11 @@ static int mtk_dp_bridge_attach(struct drm_bridge *bridge,
enable_irq(mtk_dp->irq);
mtk_dp_hwirq_enable(mtk_dp, true);
+ if (mtk_dp->bridge.type == DRM_MODE_CONNECTOR_eDP) {
+ mtk_dp->train_info.cable_plugged_in = true;
+ drm_helper_hpd_irq_event(mtk_dp->drm_dev);
+ }
+
return 0;
err_bridge_attach:
@@ -2482,6 +2489,25 @@ static int mtk_dp_register_audio_driver(struct device *dev)
return PTR_ERR_OR_ZERO(mtk_dp->audio_pdev);
}
+static int mtk_dp_edp_link_panel(struct drm_dp_aux *mtk_aux)
+{
+ struct mtk_dp *mtk_dp = container_of(mtk_aux, struct mtk_dp, aux);
+ struct device *dev = mtk_aux->dev;
+ struct drm_bridge *panel_aux_bridge;
+
+ panel_aux_bridge = devm_drm_of_get_bridge(dev, dev->of_node, 1, 0);
+
+ /* Power off the DP: either detection is done, or no panel present */
+ mtk_dp_aux_panel_poweron(mtk_dp, false);
+ mtk_dp_power_disable(mtk_dp);
+
+ if (IS_ERR(panel_aux_bridge))
+ return PTR_ERR(panel_aux_bridge);
+
+ mtk_dp->next_bridge = panel_aux_bridge;
+ return 0;
+}
+
static int mtk_dp_probe(struct platform_device *pdev)
{
struct mtk_dp *mtk_dp;
@@ -2500,21 +2526,14 @@ static int mtk_dp_probe(struct platform_device *pdev)
return dev_err_probe(dev, mtk_dp->irq,
"failed to request dp irq resource\n");
- mtk_dp->next_bridge = devm_drm_of_get_bridge(dev, dev->of_node, 1, 0);
- if (IS_ERR(mtk_dp->next_bridge) &&
- PTR_ERR(mtk_dp->next_bridge) == -ENODEV)
- mtk_dp->next_bridge = NULL;
- else if (IS_ERR(mtk_dp->next_bridge))
- return dev_err_probe(dev, PTR_ERR(mtk_dp->next_bridge),
- "Failed to get bridge\n");
-
ret = mtk_dp_dt_parse(mtk_dp, pdev);
if (ret)
return dev_err_probe(dev, ret, "Failed to parse dt\n");
- drm_dp_aux_init(&mtk_dp->aux);
mtk_dp->aux.name = "aux_mtk_dp";
+ mtk_dp->aux.dev = dev;
mtk_dp->aux.transfer = mtk_dp_aux_transfer;
+ drm_dp_aux_init(&mtk_dp->aux);
spin_lock_init(&mtk_dp->irq_thread_lock);
@@ -2570,6 +2589,39 @@ static int mtk_dp_probe(struct platform_device *pdev)
mtk_dp->need_debounce = true;
timer_setup(&mtk_dp->debounce_timer, mtk_dp_debounce_timer, 0);
+ if (mtk_dp->bridge.type == DRM_MODE_CONNECTOR_eDP) {
+ /*
+ * Set the data lanes to idle in case the bootloader didn't
+ * properly close the eDP port to avoid stalls and then
+ * reinitialize, reset and power on the AUX block.
+ */
+ mtk_dp_set_idle_pattern(mtk_dp, true);
+ mtk_dp_initialize_aux_settings(mtk_dp);
+ mtk_dp_power_enable(mtk_dp);
+
+ /*
+ * Power on the panel to allow reading the EDID from aux-bus:
+ * please note that it is necessary to call power off in the
+ * .done_probing() callback (mtk_dp_edp_link_panel), as only
+ * there we can safely assume that we finished reading EDID.
+ */
+ mtk_dp_aux_panel_poweron(mtk_dp, true);
+
+ ret = devm_of_dp_aux_populate_bus(&mtk_dp->aux, mtk_dp_edp_link_panel);
+ if (ret) {
+ /* -ENODEV this means that the panel is not on the aux-bus */
+ if (ret == -ENODEV) {
+ ret = mtk_dp_edp_link_panel(&mtk_dp->aux);
+ if (ret)
+ return ret;
+ } else {
+ mtk_dp_aux_panel_poweron(mtk_dp, false);
+ mtk_dp_power_disable(mtk_dp);
+ return ret;
+ }
+ }
+ }
+
pm_runtime_enable(dev);
pm_runtime_get_sync(dev);
For the eDP case we can support using aux-bus on MediaTek DP: this gives us the possibility to declare our panel as generic "panel-edp" which will automatically configure the timings and available modes via the EDID that we read from it. To do this, move the panel parsing at the end of the probe function so that the hardware is initialized beforehand and also initialize the DPTX AUX block and power both on as, when we populate the aux-bus, the panel driver will trigger an EDID read to perform panel detection. Last but not least, since now the AUX transfers can happen in the separated aux-bus, it was necessary to add an exclusion for the cable_plugged_in check in `mtk_dp_aux_transfer()` and the easiest way to do this is to simply ignore checking that when the bridge type is eDP. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> --- drivers/gpu/drm/mediatek/mtk_dp.c | 72 ++++++++++++++++++++++++++----- 1 file changed, 62 insertions(+), 10 deletions(-)