diff mbox series

[2/3] dt-bindings: display: panel: Add panels based on ILITEK ILI9806E

Message ID 20230719152147.355486-2-luca.ceresoli@bootlin.com (mailing list archive)
State New, archived
Headers show
Series [1/3] dt-bindings: vendor-prefixes: add ShenZhen New Display Co. | expand

Commit Message

Luca Ceresoli July 19, 2023, 3:21 p.m. UTC 
Add bindings for LCD panels based on the ILITEK ILI9806E RGB controller
connected over SPI and the "ShenZhen New Display Co NDS040480800-V3"
480x800 panel based on it.

Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
---
 .../display/panel/ilitek,ili9806e.yaml        | 69 +++++++++++++++++++
 MAINTAINERS                                   |  6 ++
 2 files changed, 75 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/ilitek,ili9806e.yaml

Comments

Conor Dooley July 19, 2023, 4:44 p.m. UTC | #1 
Hey Luca,

On Wed, Jul 19, 2023 at 05:21:46PM +0200, Luca Ceresoli wrote:
> Add bindings for LCD panels based on the ILITEK ILI9806E RGB controller
> connected over SPI and the "ShenZhen New Display Co NDS040480800-V3"
> 480x800 panel based on it.
> 
> Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
> ---
>  .../display/panel/ilitek,ili9806e.yaml        | 69 +++++++++++++++++++
>  MAINTAINERS                                   |  6 ++
>  2 files changed, 75 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/panel/ilitek,ili9806e.yaml
> 
> diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9806e.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9806e.yaml
> new file mode 100644
> index 000000000000..42abc6923065
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9806e.yaml
> @@ -0,0 +1,69 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/panel/ilitek,ili9806e.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Ilitek ILI9806E display panels
> +
> +maintainers:
> +  - Luca Ceresoli <luca.ceresoli@bootlin.com>
> +
> +description:
> +  This binding is for display panels using an Ilitek ILI9806E controller in
> +  SPI mode.

I figure you explicitly mention SPI mode here because it also supports
D{P,S}I?

> +
> +allOf:
> +  - $ref: panel-common.yaml#
> +
> +properties:
> +  compatible:
> +    items:
> +      - enum:
> +          # ShenZhen New Display Co 3.97" 480x800 RGB a-SI TFT LCD
> +          - newdisplay,nds040480800-v3
> +      - const: ilitek,ili9806e
> +
> +  reg: true
> +  spi-max-frequency: true
> +  reset-gpios: true
> +  backlight: true
> +  port: true
> +
> +required:
> +  - compatible
> +  - reg
> +  - port
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +
> +    backlight: backlight {
> +        compatible = "gpio-backlight";
> +        gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
> +    };
> +    spi {

Just a nit, a blank line between properties please. Clearly no
respinning needed for that...

Otherwise,
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>

Thanks,
Conor.

> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        display@0 {
> +            compatible = "newdisplay,nds040480800-v3", "ilitek,ili9806e";
> +            reg = <0>;
> +            spi-max-frequency = <1000000>;
> +            pinctrl-names = "default";
> +            pinctrl-0 = <&pinctrl_lcdgpios>;
> +            reset-gpios = <&gpio 26 GPIO_ACTIVE_LOW>;
> +            backlight = <&backlight>;
> +
> +            port {
> +                ili9806e_in: endpoint {
> +                    remote-endpoint = <&lcdif_out>;
> +                };
> +            };
> +        };
> +    };
> +
> +...
> diff --git a/MAINTAINERS b/MAINTAINERS
> index aee340630eca..3c38699ee821 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -6515,6 +6515,12 @@ T:	git git://anongit.freedesktop.org/drm/drm-misc
>  F:	Documentation/devicetree/bindings/display/ilitek,ili9486.yaml
>  F:	drivers/gpu/drm/tiny/ili9486.c
>  
> +DRM DRIVER FOR ILITEK ILI9806E PANELS
> +M:	Luca Ceresoli <luca.ceresoli@bootlin.com>
> +S:	Maintained
> +T:	git git://anongit.freedesktop.org/drm/drm-misc
> +F:	Documentation/devicetree/bindings/display/panel/ilitek,ili9806e.yaml
> +
>  DRM DRIVER FOR JADARD JD9365DA-H3 MIPI-DSI LCD PANELS
>  M:	Jagan Teki <jagan@edgeble.ai>
>  S:	Maintained
> -- 
> 2.34.1
>
Rob Herring (Arm) July 19, 2023, 7:02 p.m. UTC | #2 
On Wed, Jul 19, 2023 at 05:21:46PM +0200, Luca Ceresoli wrote:
> Add bindings for LCD panels based on the ILITEK ILI9806E RGB controller
> connected over SPI and the "ShenZhen New Display Co NDS040480800-V3"
> 480x800 panel based on it.
> 
> Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
> ---
>  .../display/panel/ilitek,ili9806e.yaml        | 69 +++++++++++++++++++
>  MAINTAINERS                                   |  6 ++
>  2 files changed, 75 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/panel/ilitek,ili9806e.yaml
> 
> diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9806e.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9806e.yaml
> new file mode 100644
> index 000000000000..42abc6923065
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9806e.yaml
> @@ -0,0 +1,69 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/panel/ilitek,ili9806e.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Ilitek ILI9806E display panels
> +
> +maintainers:
> +  - Luca Ceresoli <luca.ceresoli@bootlin.com>
> +
> +description:
> +  This binding is for display panels using an Ilitek ILI9806E controller in
> +  SPI mode.
> +
> +allOf:
> +  - $ref: panel-common.yaml#

A SPI device should reference spi-peripheral-props.yaml as well.

> +
> +properties:
> +  compatible:
> +    items:
> +      - enum:
> +          # ShenZhen New Display Co 3.97" 480x800 RGB a-SI TFT LCD
> +          - newdisplay,nds040480800-v3
> +      - const: ilitek,ili9806e
> +
> +  reg: true

maxItems: 1

> +  spi-max-frequency: true
> +  reset-gpios: true
> +  backlight: true
> +  port: true

Drop all these and ...

> +
> +required:
> +  - compatible
> +  - reg
> +  - port
> +
> +additionalProperties: false

... use "unevaluatedProperties" instead.

> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +
> +    backlight: backlight {
> +        compatible = "gpio-backlight";
> +        gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
> +    };

The exact backlight is outside the scope of this binding and should be 
dropped from the example.

> +    spi {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        display@0 {
> +            compatible = "newdisplay,nds040480800-v3", "ilitek,ili9806e";
> +            reg = <0>;
> +            spi-max-frequency = <1000000>;
> +            pinctrl-names = "default";
> +            pinctrl-0 = <&pinctrl_lcdgpios>;
> +            reset-gpios = <&gpio 26 GPIO_ACTIVE_LOW>;
> +            backlight = <&backlight>;
> +
> +            port {
> +                ili9806e_in: endpoint {
> +                    remote-endpoint = <&lcdif_out>;
> +                };
> +            };
> +        };
> +    };
> +
> +...
Krzysztof Kozlowski July 19, 2023, 7:12 p.m. UTC | #3 
On 19/07/2023 17:21, Luca Ceresoli wrote:
> Add bindings for LCD panels based on the ILITEK ILI9806E RGB controller
> connected over SPI and the "ShenZhen New Display Co NDS040480800-V3"
> 480x800 panel based on it.


> diff --git a/MAINTAINERS b/MAINTAINERS
> index aee340630eca..3c38699ee821 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -6515,6 +6515,12 @@ T:	git git://anongit.freedesktop.org/drm/drm-misc
>  F:	Documentation/devicetree/bindings/display/ilitek,ili9486.yaml
>  F:	drivers/gpu/drm/tiny/ili9486.c
>  
> +DRM DRIVER FOR ILITEK ILI9806E PANELS
> +M:	Luca Ceresoli <luca.ceresoli@bootlin.com>
> +S:	Maintained
> +T:	git git://anongit.freedesktop.org/drm/drm-misc

Nope, same for recent one-driver-subsystem. It's like a second try...
You do not have git tree for one driver. The git tree is for subsystem,
not driver.

Best regards,
Krzysztof
Luca Ceresoli July 20, 2023, 1:52 p.m. UTC | #4 
Hello Conor,

thanks for reviewing.

On Wed, 19 Jul 2023 17:44:45 +0100
Conor Dooley <conor@kernel.org> wrote:

> Hey Luca,
> 
> On Wed, Jul 19, 2023 at 05:21:46PM +0200, Luca Ceresoli wrote:
> > Add bindings for LCD panels based on the ILITEK ILI9806E RGB controller
> > connected over SPI and the "ShenZhen New Display Co NDS040480800-V3"
> > 480x800 panel based on it.
> > 
> > Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
> > ---
> >  .../display/panel/ilitek,ili9806e.yaml        | 69 +++++++++++++++++++
> >  MAINTAINERS                                   |  6 ++
> >  2 files changed, 75 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/display/panel/ilitek,ili9806e.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9806e.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9806e.yaml
> > new file mode 100644
> > index 000000000000..42abc6923065
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9806e.yaml
> > @@ -0,0 +1,69 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/display/panel/ilitek,ili9806e.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Ilitek ILI9806E display panels
> > +
> > +maintainers:
> > +  - Luca Ceresoli <luca.ceresoli@bootlin.com>
> > +
> > +description:
> > +  This binding is for display panels using an Ilitek ILI9806E controller in
> > +  SPI mode.  
> 
> I figure you explicitly mention SPI mode here because it also supports
> D{P,S}I?

Exactly, DSI is supported as well by the chip.

> > +allOf:
> > +  - $ref: panel-common.yaml#
> > +
> > +properties:
> > +  compatible:
> > +    items:
> > +      - enum:
> > +          # ShenZhen New Display Co 3.97" 480x800 RGB a-SI TFT LCD
> > +          - newdisplay,nds040480800-v3
> > +      - const: ilitek,ili9806e
> > +
> > +  reg: true
> > +  spi-max-frequency: true
> > +  reset-gpios: true
> > +  backlight: true
> > +  port: true
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - port
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/gpio/gpio.h>
> > +
> > +    backlight: backlight {
> > +        compatible = "gpio-backlight";
> > +        gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
> > +    };
> > +    spi {  
> 
> Just a nit, a blank line between properties please. Clearly no
> respinning needed for that...

I agree. This comes from copy-paste from another bindings file so I'm
probably sending a separate series to fix it and avoid the same issue
in the future.

Luca
Luca Ceresoli July 20, 2023, 1:52 p.m. UTC | #5 
Hello Krzysztof,

thanks for reviewing.

On Wed, 19 Jul 2023 21:12:14 +0200
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> wrote:

> On 19/07/2023 17:21, Luca Ceresoli wrote:
> > Add bindings for LCD panels based on the ILITEK ILI9806E RGB controller
> > connected over SPI and the "ShenZhen New Display Co NDS040480800-V3"
> > 480x800 panel based on it.  
> 
> 
> > diff --git a/MAINTAINERS b/MAINTAINERS
> > index aee340630eca..3c38699ee821 100644
> > --- a/MAINTAINERS
> > +++ b/MAINTAINERS
> > @@ -6515,6 +6515,12 @@ T:	git git://anongit.freedesktop.org/drm/drm-misc
> >  F:	Documentation/devicetree/bindings/display/ilitek,ili9486.yaml
> >  F:	drivers/gpu/drm/tiny/ili9486.c
> >  
> > +DRM DRIVER FOR ILITEK ILI9806E PANELS
> > +M:	Luca Ceresoli <luca.ceresoli@bootlin.com>
> > +S:	Maintained
> > +T:	git git://anongit.freedesktop.org/drm/drm-misc  
> 
> Nope, same for recent one-driver-subsystem. It's like a second try...
> You do not have git tree for one driver. The git tree is for subsystem,
> not driver.

I see, no problem, I'm removing the T: line in v2.

As this came from copy-pasting another panel driver, should the T: line
be removed from every "DRM DRIVER FOR * PANELS" entry? I could send a
patch to do that, if that makes sense.

Luca
Luca Ceresoli July 20, 2023, 1:52 p.m. UTC | #6 
Hello Rob,

thanks for reviewing.

On Wed, 19 Jul 2023 13:02:54 -0600
Rob Herring <robh@kernel.org> wrote:

> On Wed, Jul 19, 2023 at 05:21:46PM +0200, Luca Ceresoli wrote:
> > Add bindings for LCD panels based on the ILITEK ILI9806E RGB controller
> > connected over SPI and the "ShenZhen New Display Co NDS040480800-V3"
> > 480x800 panel based on it.
> > 
> > Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
> > ---
> >  .../display/panel/ilitek,ili9806e.yaml        | 69 +++++++++++++++++++
> >  MAINTAINERS                                   |  6 ++
> >  2 files changed, 75 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/display/panel/ilitek,ili9806e.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9806e.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9806e.yaml
> > new file mode 100644
> > index 000000000000..42abc6923065
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9806e.yaml
> > @@ -0,0 +1,69 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/display/panel/ilitek,ili9806e.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Ilitek ILI9806E display panels
> > +
> > +maintainers:
> > +  - Luca Ceresoli <luca.ceresoli@bootlin.com>
> > +
> > +description:
> > +  This binding is for display panels using an Ilitek ILI9806E controller in
> > +  SPI mode.
> > +
> > +allOf:
> > +  - $ref: panel-common.yaml#  
> 
> A SPI device should reference spi-peripheral-props.yaml as well.
> 
> > +
> > +properties:
> > +  compatible:
> > +    items:
> > +      - enum:
> > +          # ShenZhen New Display Co 3.97" 480x800 RGB a-SI TFT LCD
> > +          - newdisplay,nds040480800-v3
> > +      - const: ilitek,ili9806e
> > +
> > +  reg: true  
> 
> maxItems: 1
> 
> > +  spi-max-frequency: true
> > +  reset-gpios: true
> > +  backlight: true
> > +  port: true  
> 
> Drop all these and ...
> 
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - port
> > +
> > +additionalProperties: false  
> 
> ... use "unevaluatedProperties" instead.
> 
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/gpio/gpio.h>
> > +
> > +    backlight: backlight {
> > +        compatible = "gpio-backlight";
> > +        gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
> > +    };  
> 
> The exact backlight is outside the scope of this binding and should be 
> dropped from the example.

As this comes from copy-pasting from the bindings yaml for another
panel, would it be useful if I send a patch to remove it?

Requested changes queued for v2.

Luca
Rob Herring (Arm) July 24, 2023, 2:31 p.m. UTC | #7 
On Thu, Jul 20, 2023 at 03:52:38PM +0200, Luca Ceresoli wrote:
> Hello Rob,
> 
> thanks for reviewing.
> 
> On Wed, 19 Jul 2023 13:02:54 -0600
> Rob Herring <robh@kernel.org> wrote:
> 
> > On Wed, Jul 19, 2023 at 05:21:46PM +0200, Luca Ceresoli wrote:
> > > Add bindings for LCD panels based on the ILITEK ILI9806E RGB controller
> > > connected over SPI and the "ShenZhen New Display Co NDS040480800-V3"
> > > 480x800 panel based on it.
> > > 
> > > Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
> > > ---
> > >  .../display/panel/ilitek,ili9806e.yaml        | 69 +++++++++++++++++++
> > >  MAINTAINERS                                   |  6 ++
> > >  2 files changed, 75 insertions(+)
> > >  create mode 100644 Documentation/devicetree/bindings/display/panel/ilitek,ili9806e.yaml
> > > 
> > > diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9806e.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9806e.yaml
> > > new file mode 100644
> > > index 000000000000..42abc6923065
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9806e.yaml
> > > @@ -0,0 +1,69 @@
> > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > > +%YAML 1.2
> > > +---
> > > +$id: http://devicetree.org/schemas/display/panel/ilitek,ili9806e.yaml#
> > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > +
> > > +title: Ilitek ILI9806E display panels
> > > +
> > > +maintainers:
> > > +  - Luca Ceresoli <luca.ceresoli@bootlin.com>
> > > +
> > > +description:
> > > +  This binding is for display panels using an Ilitek ILI9806E controller in
> > > +  SPI mode.
> > > +
> > > +allOf:
> > > +  - $ref: panel-common.yaml#  
> > 
> > A SPI device should reference spi-peripheral-props.yaml as well.
> > 
> > > +
> > > +properties:
> > > +  compatible:
> > > +    items:
> > > +      - enum:
> > > +          # ShenZhen New Display Co 3.97" 480x800 RGB a-SI TFT LCD
> > > +          - newdisplay,nds040480800-v3
> > > +      - const: ilitek,ili9806e
> > > +
> > > +  reg: true  
> > 
> > maxItems: 1
> > 
> > > +  spi-max-frequency: true
> > > +  reset-gpios: true
> > > +  backlight: true
> > > +  port: true  
> > 
> > Drop all these and ...
> > 
> > > +
> > > +required:
> > > +  - compatible
> > > +  - reg
> > > +  - port
> > > +
> > > +additionalProperties: false  
> > 
> > ... use "unevaluatedProperties" instead.
> > 
> > > +
> > > +examples:
> > > +  - |
> > > +    #include <dt-bindings/gpio/gpio.h>
> > > +
> > > +    backlight: backlight {
> > > +        compatible = "gpio-backlight";
> > > +        gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
> > > +    };  
> > 
> > The exact backlight is outside the scope of this binding and should be 
> > dropped from the example.
> 
> As this comes from copy-pasting from the bindings yaml for another
> panel, would it be useful if I send a patch to remove it?

Yes.

Rob
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9806e.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9806e.yaml
new file mode 100644
index 000000000000..42abc6923065
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9806e.yaml
@@ -0,0 +1,69 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/ilitek,ili9806e.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ilitek ILI9806E display panels
+
+maintainers:
+  - Luca Ceresoli <luca.ceresoli@bootlin.com>
+
+description:
+  This binding is for display panels using an Ilitek ILI9806E controller in
+  SPI mode.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          # ShenZhen New Display Co 3.97" 480x800 RGB a-SI TFT LCD
+          - newdisplay,nds040480800-v3
+      - const: ilitek,ili9806e
+
+  reg: true
+  spi-max-frequency: true
+  reset-gpios: true
+  backlight: true
+  port: true
+
+required:
+  - compatible
+  - reg
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    backlight: backlight {
+        compatible = "gpio-backlight";
+        gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
+    };
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        display@0 {
+            compatible = "newdisplay,nds040480800-v3", "ilitek,ili9806e";
+            reg = <0>;
+            spi-max-frequency = <1000000>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&pinctrl_lcdgpios>;
+            reset-gpios = <&gpio 26 GPIO_ACTIVE_LOW>;
+            backlight = <&backlight>;
+
+            port {
+                ili9806e_in: endpoint {
+                    remote-endpoint = <&lcdif_out>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index aee340630eca..3c38699ee821 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6515,6 +6515,12 @@  T:	git git://anongit.freedesktop.org/drm/drm-misc
 F:	Documentation/devicetree/bindings/display/ilitek,ili9486.yaml
 F:	drivers/gpu/drm/tiny/ili9486.c
 
+DRM DRIVER FOR ILITEK ILI9806E PANELS
+M:	Luca Ceresoli <luca.ceresoli@bootlin.com>
+S:	Maintained
+T:	git git://anongit.freedesktop.org/drm/drm-misc
+F:	Documentation/devicetree/bindings/display/panel/ilitek,ili9806e.yaml
+
 DRM DRIVER FOR JADARD JD9365DA-H3 MIPI-DSI LCD PANELS
 M:	Jagan Teki <jagan@edgeble.ai>
 S:	Maintained