@@ -23,6 +23,7 @@
#include <drm/bridge/dw_mipi_dsi.h>
#include <drm/drm_atomic_helper.h>
#include <drm/drm_bridge.h>
+#include <drm/drm_connector.h>
#include <drm/drm_crtc.h>
#include <drm/drm_mipi_dsi.h>
#include <drm/drm_modes.h>
@@ -565,6 +566,17 @@ dw_mipi_dsi_bridge_atomic_get_input_bus_fmts(struct drm_bridge *bridge,
return input_fmts;
}
+static int dw_mipi_dsi_bridge_atomic_check(struct drm_bridge *bridge,
+ struct drm_bridge_state *bridge_state,
+ struct drm_crtc_state *crtc_state,
+ struct drm_connector_state *conn_state)
+{
+ bridge_state->input_bus_cfg.flags =
+ DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE;
+
+ return 0;
+}
+
static void dw_mipi_dsi_video_mode_config(struct dw_mipi_dsi *dsi)
{
u32 val;
@@ -1033,6 +1045,7 @@ static const struct drm_bridge_funcs dw_mipi_dsi_bridge_funcs = {
.atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state,
.atomic_destroy_state = drm_atomic_helper_bridge_destroy_state,
.atomic_get_input_bus_fmts = dw_mipi_dsi_bridge_atomic_get_input_bus_fmts,
+ .atomic_check = dw_mipi_dsi_bridge_atomic_check,
.atomic_reset = drm_atomic_helper_bridge_reset,
.atomic_enable = dw_mipi_dsi_bridge_atomic_enable,
.atomic_post_disable = dw_mipi_dsi_bridge_post_atomic_disable,
The DATAEN_ACTIVE_LOW bit in DSI_DPI_CFG_POL register is set to zero, so set the DRM_BUS_FLAG_DE_HIGH flag in input_bus_cfg.flags. It appears that the DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE flag also makes sense, so set it in input_bus_cfg.flags too. With this patch, the flags set by drm_atomic_bridge_propagate_bus_flags() are overridden (see comment in that function) in case any downstream bridges propagates invalid flags to this bridge. A real problematic case is to connect a RM67191 MIPI DSI panel whose driver sets DRM_BUS_FLAG_DE_LOW and DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE bus flags. Signed-off-by: Liu Ying <victor.liu@nxp.com> --- v1->v2: * No change. drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c | 13 +++++++++++++ 1 file changed, 13 insertions(+)