@@ -262,6 +262,26 @@ static bool drm_kms_helper_enable_hpd(struct drm_device *dev)
}
#define DRM_OUTPUT_POLL_PERIOD (10*HZ)
+static void reschedule_output_poll_work(struct drm_device *dev)
+{
+ unsigned long delay = DRM_OUTPUT_POLL_PERIOD;
+
+ if (dev->mode_config.delayed_event)
+ /*
+ * FIXME:
+ *
+ * Use short (1s) delay to handle the initial delayed event.
+ * This delay should not be needed, but Optimus/nouveau will
+ * fail in a mysterious way if the delayed event is handled as
+ * soon as possible like it is done in
+ * drm_helper_probe_single_connector_modes() in case the poll
+ * was enabled before.
+ */
+ delay = HZ;
+
+ schedule_delayed_work(&dev->mode_config.output_poll_work, delay);
+}
+
/**
* drm_kms_helper_poll_enable - re-enable output polling.
* @dev: drm_device
@@ -279,37 +299,41 @@ static bool drm_kms_helper_enable_hpd(struct drm_device *dev)
*/
void drm_kms_helper_poll_enable(struct drm_device *dev)
{
- bool poll = false;
- unsigned long delay = DRM_OUTPUT_POLL_PERIOD;
-
if (!dev->mode_config.poll_enabled || !drm_kms_helper_poll ||
dev->mode_config.poll_running)
return;
- poll = drm_kms_helper_enable_hpd(dev);
-
- if (dev->mode_config.delayed_event) {
- /*
- * FIXME:
- *
- * Use short (1s) delay to handle the initial delayed event.
- * This delay should not be needed, but Optimus/nouveau will
- * fail in a mysterious way if the delayed event is handled as
- * soon as possible like it is done in
- * drm_helper_probe_single_connector_modes() in case the poll
- * was enabled before.
- */
- poll = true;
- delay = HZ;
- }
-
- if (poll)
- schedule_delayed_work(&dev->mode_config.output_poll_work, delay);
+ if (drm_kms_helper_enable_hpd(dev) ||
+ dev->mode_config.delayed_event)
+ reschedule_output_poll_work(dev);
dev->mode_config.poll_running = true;
}
EXPORT_SYMBOL(drm_kms_helper_poll_enable);
+/**
+ * drm_kms_helper_poll_reschedule - reschedule the output polling work
+ * @dev: drm_device
+ *
+ * This function reschedules the output polling work, after polling for a
+ * connector has been enabled.
+ *
+ * Drivers must call this helper after enabling polling for a connector by
+ * setting %DRM_CONNECTOR_POLL_CONNECT / %DRM_CONNECTOR_POLL_DISCONNECT flags
+ * in drm_connector::polled. Note that after disabling polling by clearing these
+ * flags for a connector will stop the output polling work automatically if
+ * the polling is disabled for all other connectors as well.
+ *
+ * The function can be called only after polling has been enabled by calling
+ * drm_kms_helper_poll_init() / drm_kms_helper_poll_enable().
+ */
+void drm_kms_helper_poll_reschedule(struct drm_device *dev)
+{
+ if (dev->mode_config.poll_running)
+ reschedule_output_poll_work(dev);
+}
+EXPORT_SYMBOL(drm_kms_helper_poll_reschedule);
+
static enum drm_connector_status
drm_helper_probe_detect_ctx(struct drm_connector *connector, bool force)
{
@@ -25,6 +25,7 @@ void drm_kms_helper_connector_hotplug_event(struct drm_connector *connector);
void drm_kms_helper_poll_disable(struct drm_device *dev);
void drm_kms_helper_poll_enable(struct drm_device *dev);
+void drm_kms_helper_poll_reschedule(struct drm_device *dev);
bool drm_kms_helper_is_poll_worker(void);
enum drm_mode_status drm_crtc_helper_mode_valid_fixed(struct drm_crtc *crtc,
Add a helper to reschedule drm_mode_config::output_poll_work after polling has been enabled for a connector (and needing a reschedule, since previously polling was disabled for all connectors and hence output_poll_work was not running). This is needed by the next patch fixing HPD polling on i915. Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Imre Deak <imre.deak@intel.com> --- drivers/gpu/drm/drm_probe_helper.c | 68 ++++++++++++++++++++---------- include/drm/drm_probe_helper.h | 1 + 2 files changed, 47 insertions(+), 22 deletions(-)