| Message ID | 20230810144116.855951-2-luca.ceresoli@bootlin.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v2,1/3] dt-bindings: vendor-prefixes: add ShenZhen New Display Co. | expand |
On Thu, 10 Aug 2023 16:41:15 +0200, Luca Ceresoli wrote: > Add bindings for LCD panels based on the ILITEK ILI9806E RGB controller > connected over SPI and the "ShenZhen New Display Co NDS040480800-V3" > 480x800 panel based on it. > > Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com> > > --- > > Changes in v2: > - remove T: line form MAINTAINERS entry > - reference spi-peripheral-props.yaml > - add 'maxItems: 1' to reg > - use unevaluatedProperties > - remove out of scope backlight node > --- > .../display/panel/ilitek,ili9806e.yaml | 63 +++++++++++++++++++ > MAINTAINERS | 5 ++ > 2 files changed, 68 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/panel/ilitek,ili9806e.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230810144116.855951-2-luca.ceresoli@bootlin.com The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
On Thu, 10 Aug 2023 16:41:15 +0200, Luca Ceresoli wrote: > Add bindings for LCD panels based on the ILITEK ILI9806E RGB controller > connected over SPI and the "ShenZhen New Display Co NDS040480800-V3" > 480x800 panel based on it. > > Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com> > > --- > > Changes in v2: > - remove T: line form MAINTAINERS entry > - reference spi-peripheral-props.yaml > - add 'maxItems: 1' to reg > - use unevaluatedProperties > - remove out of scope backlight node > --- > .../display/panel/ilitek,ili9806e.yaml | 63 +++++++++++++++++++ > MAINTAINERS | 5 ++ > 2 files changed, 68 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/panel/ilitek,ili9806e.yaml > Reviewed-by: Rob Herring <robh@kernel.org>
diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9806e.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9806e.yaml new file mode 100644 index 000000000000..83d177be4e7d --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9806e.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/ilitek,ili9806e.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ilitek ILI9806E display panels + +maintainers: + - Luca Ceresoli <luca.ceresoli@bootlin.com> + +description: + This binding is for display panels using an Ilitek ILI9806E controller in + SPI mode. + +allOf: + - $ref: panel-common.yaml# + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + items: + - enum: + # ShenZhen New Display Co 3.97" 480x800 RGB a-SI TFT LCD + - newdisplay,nds040480800-v3 + - const: ilitek,ili9806e + + reg: + maxItems: 1 + +required: + - compatible + - reg + - port + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + spi { + #address-cells = <1>; + #size-cells = <0>; + + display@0 { + compatible = "newdisplay,nds040480800-v3", "ilitek,ili9806e"; + reg = <0>; + spi-max-frequency = <1000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcdgpios>; + reset-gpios = <&gpio 26 GPIO_ACTIVE_LOW>; + backlight = <&backlight>; + + port { + ili9806e_in: endpoint { + remote-endpoint = <&lcdif_out>; + }; + }; + }; + }; + +... diff --git a/MAINTAINERS b/MAINTAINERS index 0f966f05fb0d..085e44a7b5e1 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -6516,6 +6516,11 @@ T: git git://anongit.freedesktop.org/drm/drm-misc F: Documentation/devicetree/bindings/display/ilitek,ili9486.yaml F: drivers/gpu/drm/tiny/ili9486.c +DRM DRIVER FOR ILITEK ILI9806E PANELS +M: Luca Ceresoli <luca.ceresoli@bootlin.com> +S: Maintained +F: Documentation/devicetree/bindings/display/panel/ilitek,ili9806e.yaml + DRM DRIVER FOR JADARD JD9365DA-H3 MIPI-DSI LCD PANELS M: Jagan Teki <jagan@edgeble.ai> S: Maintained
Add bindings for LCD panels based on the ILITEK ILI9806E RGB controller connected over SPI and the "ShenZhen New Display Co NDS040480800-V3" 480x800 panel based on it. Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com> --- Changes in v2: - remove T: line form MAINTAINERS entry - reference spi-peripheral-props.yaml - add 'maxItems: 1' to reg - use unevaluatedProperties - remove out of scope backlight node --- .../display/panel/ilitek,ili9806e.yaml | 63 +++++++++++++++++++ MAINTAINERS | 5 ++ 2 files changed, 68 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/ilitek,ili9806e.yaml