diff mbox series

[v3,1/2] dt-bindings: display: imx: add binding for i.MX8MP HDMI PVI

Message ID 20230920171009.3193296-1-l.stach@pengutronix.de (mailing list archive)
State New, archived
Headers show
Series [v3,1/2] dt-bindings: display: imx: add binding for i.MX8MP HDMI PVI | expand

Commit Message

Lucas Stach Sept. 20, 2023, 5:10 p.m. UTC 
Add binding for the i.MX8MP HDMI parallel video interface block.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
---
 .../display/imx/fsl,imx8mp-hdmi-pvi.yaml      | 80 +++++++++++++++++++
 1 file changed, 80 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/imx/fsl,imx8mp-hdmi-pvi.yaml

Comments

Laurent Pinchart Sept. 20, 2023, 7:07 p.m. UTC | #1 
Hi Lucas,

Thank you for the patch.

On Wed, Sep 20, 2023 at 07:10:08PM +0200, Lucas Stach wrote:
> Add binding for the i.MX8MP HDMI parallel video interface block.
> 
> Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
> ---
>  .../display/imx/fsl,imx8mp-hdmi-pvi.yaml      | 80 +++++++++++++++++++
>  1 file changed, 80 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/imx/fsl,imx8mp-hdmi-pvi.yaml
> 
> diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx8mp-hdmi-pvi.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx8mp-hdmi-pvi.yaml
> new file mode 100644
> index 000000000000..12855bb3ed4c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/imx/fsl,imx8mp-hdmi-pvi.yaml
> @@ -0,0 +1,80 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/imx/fsl,imx8mp-hdmi-pvi.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Freescale i.MX8MP HDMI Parallel Video Interface
> +
> +maintainers:
> +  - Lucas Stach <l.stach@pengutronix.de>
> +
> +description: |
> +  The HDMI parallel video interface is a timing and sync generator block in the
> +  i.MX8MP SoC, that sits between the video source and the HDMI TX controller.
> +
> +properties:
> +  compatible:
> +    const: fsl,imx8mp-hdmi-pvi
> +
> +  reg:
> +    maxItems: 1
> +
> +  power-domains:
> +    maxItems: 1
> +
> +  ports:
> +    $ref: /schemas/graph.yaml#/properties/ports
> +
> +    properties:
> +      port@0:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        description: Input from the LCDIF controller.
> +
> +      port@1:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        description: Output to the HDMI TX controller.
> +
> +    required:
> +      - port@0
> +      - port@1
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts

The interrupts property is missing above. With this fixed,

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

> +  - power-domains
> +  - ports
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    #include <dt-bindings/power/imx8mp-power.h>
> +
> +    display-bridge@32fc4000 {
> +        compatible = "fsl,imx8mp-hdmi-pvi";
> +        reg = <0x32fc4000 0x40>;
> +        interrupts = <12 IRQ_TYPE_LEVEL_HIGH>;
> +        power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_PVI>;
> +
> +        ports {
> +            #address-cells = <1>;
> +            #size-cells = <0>;
> +
> +            port@0 {
> +                reg = <0>;
> +                pvi_from_lcdif3: endpoint {
> +                    remote-endpoint = <&lcdif3_to_pvi>;
> +                };
> +            };
> +
> +            port@1 {
> +                reg = <1>;
> +                pvi_to_hdmi_tx: endpoint {
> +                    remote-endpoint = <&hdmi_tx_from_pvi>;
> +                };
> +            };
> +        };
> +    };
Rob Herring (Arm) Sept. 20, 2023, 10:33 p.m. UTC | #2 
On Wed, 20 Sep 2023 19:10:08 +0200, Lucas Stach wrote:
> Add binding for the i.MX8MP HDMI parallel video interface block.
> 
> Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
> ---
>  .../display/imx/fsl,imx8mp-hdmi-pvi.yaml      | 80 +++++++++++++++++++
>  1 file changed, 80 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/imx/fsl,imx8mp-hdmi-pvi.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/imx/fsl,imx8mp-hdmi-pvi.example.dtb: display-bridge@32fc4000: 'interrupts' does not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/display/imx/fsl,imx8mp-hdmi-pvi.yaml#

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230920171009.3193296-1-l.stach@pengutronix.de

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx8mp-hdmi-pvi.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx8mp-hdmi-pvi.yaml
new file mode 100644
index 000000000000..12855bb3ed4c
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/imx/fsl,imx8mp-hdmi-pvi.yaml
@@ -0,0 +1,80 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx8mp-hdmi-pvi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8MP HDMI Parallel Video Interface
+
+maintainers:
+  - Lucas Stach <l.stach@pengutronix.de>
+
+description: |
+  The HDMI parallel video interface is a timing and sync generator block in the
+  i.MX8MP SoC, that sits between the video source and the HDMI TX controller.
+
+properties:
+  compatible:
+    const: fsl,imx8mp-hdmi-pvi
+
+  reg:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Input from the LCDIF controller.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Output to the HDMI TX controller.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-domains
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/power/imx8mp-power.h>
+
+    display-bridge@32fc4000 {
+        compatible = "fsl,imx8mp-hdmi-pvi";
+        reg = <0x32fc4000 0x40>;
+        interrupts = <12 IRQ_TYPE_LEVEL_HIGH>;
+        power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_PVI>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                pvi_from_lcdif3: endpoint {
+                    remote-endpoint = <&lcdif3_to_pvi>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                pvi_to_hdmi_tx: endpoint {
+                    remote-endpoint = <&hdmi_tx_from_pvi>;
+                };
+            };
+        };
+    };