@@ -68,6 +68,7 @@ static const struct hw_sequencer_funcs dcn30_funcs = {
.setup_stereo = dcn10_setup_stereo,
.set_avmute = dcn30_set_avmute,
.log_hw_state = dcn10_log_hw_state,
+ .log_color_state = dcn30_log_color_state,
.get_hw_state = dcn10_get_hw_state,
.clear_status_bits = dcn10_clear_status_bits,
.wait_for_mpcc_disconnect = dcn10_wait_for_mpcc_disconnect,
@@ -72,6 +72,7 @@ static const struct hw_sequencer_funcs dcn301_funcs = {
.setup_stereo = dcn10_setup_stereo,
.set_avmute = dcn30_set_avmute,
.log_hw_state = dcn10_log_hw_state,
+ .log_color_state = dcn30_log_color_state,
.get_hw_state = dcn10_get_hw_state,
.clear_status_bits = dcn10_clear_status_bits,
.wait_for_mpcc_disconnect = dcn10_wait_for_mpcc_disconnect,
@@ -71,6 +71,7 @@ static const struct hw_sequencer_funcs dcn31_funcs = {
.setup_stereo = dcn10_setup_stereo,
.set_avmute = dcn30_set_avmute,
.log_hw_state = dcn10_log_hw_state,
+ .log_color_state = dcn30_log_color_state,
.get_hw_state = dcn10_get_hw_state,
.clear_status_bits = dcn10_clear_status_bits,
.wait_for_mpcc_disconnect = dcn10_wait_for_mpcc_disconnect,
@@ -73,6 +73,7 @@ static const struct hw_sequencer_funcs dcn314_funcs = {
.setup_stereo = dcn10_setup_stereo,
.set_avmute = dcn30_set_avmute,
.log_hw_state = dcn10_log_hw_state,
+ .log_color_state = dcn30_log_color_state,
.get_hw_state = dcn10_get_hw_state,
.clear_status_bits = dcn10_clear_status_bits,
.wait_for_mpcc_disconnect = dcn10_wait_for_mpcc_disconnect,
@@ -374,7 +374,10 @@ void dcn10_log_hw_state(struct dc *dc,
dcn10_log_hubp_states(dc, log_ctx);
- dcn10_log_color_state(dc, log_ctx);
+ if (dc->hwss.log_color_state)
+ dc->hwss.log_color_state(dc, log_ctx);
+ else
+ dcn10_log_color_state(dc, log_ctx);
DTN_INFO("OTG: v_bs v_be v_ss v_se vpol vmax vmin vmax_sel vmin_sel h_bs h_be h_ss h_se hpol htot vtot underflow blank_en\n");
@@ -69,6 +69,132 @@
#define FN(reg_name, field_name) \
hws->shifts->field_name, hws->masks->field_name
+void dcn30_log_color_state(struct dc *dc,
+ struct dc_log_buffer_ctx *log_ctx)
+{
+ struct dc_context *dc_ctx = dc->ctx;
+ struct resource_pool *pool = dc->res_pool;
+ int i;
+
+ DTN_INFO("DPP: DGAM ROM DGAM ROM type DGAM LUT SHAPER mode"
+ " 3DLUT mode 3DLUT bit depth 3DLUT size RGAM mode"
+ " GAMUT adjust "
+ "C11 C12 C13 C14 "
+ "C21 C22 C23 C24 "
+ "C31 C32 C33 C34 \n");
+
+ for (i = 0; i < pool->pipe_count; i++) {
+ struct dpp *dpp = pool->dpps[i];
+ struct dcn_dpp_state s = {0};
+
+ dpp->funcs->dpp_read_state(dpp, &s);
+ dpp->funcs->dpp_get_gamut_remap(dpp, &s.gamut_remap);
+
+ if (!s.is_enabled)
+ continue;
+
+ DTN_INFO("[%2d]: %7x %13s %8s %11s %10s %15s %10s %9s"
+ " %12s "
+ "%010lld %010lld %010lld %010lld "
+ "%010lld %010lld %010lld %010lld "
+ "%010lld %010lld %010lld %010lld",
+ dpp->inst,
+ s.pre_dgam_mode,
+ (s.pre_dgam_select == 0) ? "sRGB" :
+ ((s.pre_dgam_select == 1) ? "Gamma 2.2" :
+ ((s.pre_dgam_select == 2) ? "Gamma 2.4" :
+ ((s.pre_dgam_select == 3) ? "Gamma 2.6" :
+ ((s.pre_dgam_select == 4) ? "BT.709" :
+ ((s.pre_dgam_select == 5) ? "PQ" :
+ ((s.pre_dgam_select == 6) ? "HLG" :
+ "Unknown")))))),
+ (s.gamcor_mode == 0) ? "Bypass" :
+ ((s.gamcor_mode == 1) ? "RAM A" :
+ "RAM B"),
+ (s.shaper_lut_mode == 1) ? "RAM A" :
+ ((s.shaper_lut_mode == 2) ? "RAM B" :
+ "Bypass"),
+ (s.lut3d_mode == 1) ? "RAM A" :
+ ((s.lut3d_mode == 2) ? "RAM B" :
+ "Bypass"),
+ (s.lut3d_bit_depth <= 0) ? "12-bit" : "10-bit",
+ (s.lut3d_size == 0) ? "17x17x17" : "9x9x9",
+ (s.rgam_lut_mode == 0) ? "Bypass" :
+ ((s.rgam_lut_mode == 1) ? "RAM A" :
+ "RAM B"),
+ (s.gamut_remap.gamut_adjust_type == 0) ? "Bypass" :
+ ((s.gamut_remap.gamut_adjust_type == 1) ? "HW" :
+ "SW"),
+ s.gamut_remap.temperature_matrix[0].value,
+ s.gamut_remap.temperature_matrix[1].value,
+ s.gamut_remap.temperature_matrix[2].value,
+ s.gamut_remap.temperature_matrix[3].value,
+ s.gamut_remap.temperature_matrix[4].value,
+ s.gamut_remap.temperature_matrix[5].value,
+ s.gamut_remap.temperature_matrix[6].value,
+ s.gamut_remap.temperature_matrix[7].value,
+ s.gamut_remap.temperature_matrix[8].value,
+ s.gamut_remap.temperature_matrix[9].value,
+ s.gamut_remap.temperature_matrix[10].value,
+ s.gamut_remap.temperature_matrix[11].value);
+ DTN_INFO("\n");
+ }
+ DTN_INFO("\n");
+
+ DTN_INFO("MPCC: OPP DPP MPCCBOT MODE ALPHA_MODE PREMULT OVERLAP_ONLY IDLE"
+ " SHAPER mode 3DLUT mode 3DLUT bit-depth 3DLUT size OGAM mode OGAM LUT"
+ " GAMUT adjust "
+ "C11 C12 C13 C14 "
+ "C21 C22 C23 C24 "
+ "C31 C32 C33 C34 \n");
+
+ for (i = 0; i < pool->pipe_count; i++) {
+ struct mpcc_state s = {0};
+
+ pool->mpc->funcs->read_mpcc_state(pool->mpc, i, &s);
+ mpc3_get_gamut_remap(pool->mpc, i, &s.gamut_remap);
+
+ if (s.opp_id != 0xf)
+ DTN_INFO("[%2d]: %2xh %2xh %6xh %4d %10d %7d %12d %4d %11s %11s %16s %11s %10s %9s"
+ " %-12s "
+ "%010lld %010lld %010lld %010lld "
+ "%010lld %010lld %010lld %010lld "
+ "%010lld %010lld %010lld %010lld\n",
+ i, s.opp_id, s.dpp_id, s.bot_mpcc_id,
+ s.mode, s.alpha_mode, s.pre_multiplied_alpha, s.overlap_only,
+ s.idle,
+ (s.shaper_lut_mode == 1) ? "RAM A" :
+ ((s.shaper_lut_mode == 2) ? "RAM B" :
+ "Bypass"),
+ (s.lut3d_mode == 1) ? "RAM A" :
+ ((s.lut3d_mode == 2) ? "RAM B" :
+ "Bypass"),
+ (s.lut3d_bit_depth <= 0) ? "12-bit" : "10-bit",
+ (s.lut3d_size == 0) ? "17x17x17" : "9x9x9",
+ (s.rgam_mode == 0) ? "Bypass" :
+ ((s.rgam_mode == 2) ? "RAM" :
+ "Unknown"),
+ (s.rgam_mode == 1) ? "B" : "A",
+ (s.gamut_remap.gamut_adjust_type == 0) ? "Bypass" :
+ ((s.gamut_remap.gamut_adjust_type == 1) ? "HW" :
+ "SW"),
+ s.gamut_remap.temperature_matrix[0].value,
+ s.gamut_remap.temperature_matrix[1].value,
+ s.gamut_remap.temperature_matrix[2].value,
+ s.gamut_remap.temperature_matrix[3].value,
+ s.gamut_remap.temperature_matrix[4].value,
+ s.gamut_remap.temperature_matrix[5].value,
+ s.gamut_remap.temperature_matrix[6].value,
+ s.gamut_remap.temperature_matrix[7].value,
+ s.gamut_remap.temperature_matrix[8].value,
+ s.gamut_remap.temperature_matrix[9].value,
+ s.gamut_remap.temperature_matrix[10].value,
+ s.gamut_remap.temperature_matrix[11].value);
+
+ }
+ DTN_INFO("\n");
+}
+
bool dcn30_set_blend_lut(
struct pipe_ctx *pipe_ctx, const struct dc_plane_state *plane_state)
{
@@ -52,6 +52,9 @@ bool dcn30_mmhubbub_warmup(
unsigned int num_dwb,
struct dc_writeback_info *wb_info);
+void dcn30_log_color_state(struct dc *dc,
+ struct dc_log_buffer_ctx *log_ctx);
+
bool dcn30_set_blend_lut(struct pipe_ctx *pipe_ctx,
const struct dc_plane_state *plane_state);
@@ -338,6 +338,8 @@ struct hw_sequencer_funcs {
/* HW State Logging Related */
void (*log_hw_state)(struct dc *dc, struct dc_log_buffer_ctx *log_ctx);
+ void (*log_color_state)(struct dc *dc,
+ struct dc_log_buffer_ctx *log_ctx);
void (*get_hw_state)(struct dc *dc, char *pBuf,
unsigned int bufSize, unsigned int mask);
void (*clear_status_bits)(struct dc *dc, unsigned int mask);
Color caps changed between HW versions, which caused the DCN10 color state sections in the DTN log to no longer match DCN3+ state. Create a color state log specific to DCN3.0 and hook it up to DCN3.0+ and DCN3.1+ drivers. rfc-v2: - detail RAM mode for gamcor and blnd gamma blocks - add MPC gamut remap matrix log v3: - read MPC gamut remap matrix in fixed 31.32 format - extend to DCN3.0+ and DCN3.1+ drivers (Harry) Signed-off-by: Melissa Wen <mwen@igalia.com> --- .../gpu/drm/amd/display/dc/dcn30/dcn30_init.c | 1 + .../drm/amd/display/dc/dcn301/dcn301_init.c | 1 + .../gpu/drm/amd/display/dc/dcn31/dcn31_init.c | 1 + .../drm/amd/display/dc/dcn314/dcn314_init.c | 1 + .../amd/display/dc/hwss/dcn10/dcn10_hwseq.c | 5 +- .../amd/display/dc/hwss/dcn30/dcn30_hwseq.c | 126 ++++++++++++++++++ .../amd/display/dc/hwss/dcn30/dcn30_hwseq.h | 3 + .../drm/amd/display/dc/hwss/hw_sequencer.h | 2 + 8 files changed, 139 insertions(+), 1 deletion(-)