diff mbox series

[v4,04/10] drm: bridge: samsung-dsim: complete the CLKLANE_STOP setting

Message ID 20231205105341.4100896-5-dario.binacchi@amarulasolutions.com (mailing list archive)
State New, archived
Headers show
Series Add displays support for bsh-smm-s2/pro boards | expand

Commit Message

Dario Binacchi Dec. 5, 2023, 10:52 a.m. UTC 
The patch completes the setting of CLKLANE_STOP for the imx8mn and imx8mp
platforms (i. e. not exynos).

Co-developed-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
---

(no changes since v1)

 drivers/gpu/drm/bridge/samsung-dsim.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/gpu/drm/bridge/samsung-dsim.c b/drivers/gpu/drm/bridge/samsung-dsim.c
index 15bf05b2bbe4..13f181c99d7e 100644
--- a/drivers/gpu/drm/bridge/samsung-dsim.c
+++ b/drivers/gpu/drm/bridge/samsung-dsim.c
@@ -96,6 +96,7 @@ 
 #define DSIM_MFLUSH_VS			BIT(29)
 /* This flag is valid only for exynos3250/3472/5260/5430 */
 #define DSIM_CLKLANE_STOP		BIT(30)
+#define DSIM_NON_CONTINUOUS_CLKLANE	BIT(31)
 
 /* DSIM_ESCMODE */
 #define DSIM_TX_TRIGGER_RST		BIT(4)
@@ -945,8 +946,12 @@  static int samsung_dsim_init_link(struct samsung_dsim *dsi)
 	 * power consumption.
 	 */
 	if (driver_data->has_clklane_stop &&
-	    dsi->mode_flags & MIPI_DSI_CLOCK_NON_CONTINUOUS)
+	    dsi->mode_flags & MIPI_DSI_CLOCK_NON_CONTINUOUS) {
+		if (!samsung_dsim_hw_is_exynos(dsi->plat_data->hw_type))
+			reg |= DSIM_NON_CONTINUOUS_CLKLANE;
+
 		reg |= DSIM_CLKLANE_STOP;
+	}
 	samsung_dsim_write(dsi, DSIM_CONFIG_REG, reg);
 
 	lanes_mask = BIT(dsi->lanes) - 1;