diff mbox series

[v4,16/17] arm64: dts: rockchip: Add vop on rk3588

Message ID 20231207080247.652780-1-andyshrk@163.com (mailing list archive)
State New, archived
Headers show
Series Add VOP2 support on rk3588 | expand

Commit Message

Andy Yan Dec. 7, 2023, 8:02 a.m. UTC 
From: Andy Yan <andy.yan@rock-chips.com>

Add vop dt node for rk3588.

Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
---

(no changes since v1)

 arch/arm64/boot/dts/rockchip/rk3588s.dtsi | 96 +++++++++++++++++++++++
 1 file changed, 96 insertions(+)

Comments

Heiko Stuebner Dec. 8, 2023, 4:26 p.m. UTC | #1 
Hi Andy,

Am Donnerstag, 7. Dezember 2023, 09:02:47 CET schrieb Andy Yan:
> From: Andy Yan <andy.yan@rock-chips.com>
> 
> Add vop dt node for rk3588.
> 
> Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
> ---
> 
> (no changes since v1)
> 
>  arch/arm64/boot/dts/rockchip/rk3588s.dtsi | 96 +++++++++++++++++++++++
>  1 file changed, 96 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
> index 7064c0e9179f..a9810ca78dc4 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
> @@ -593,6 +608,87 @@ i2c0: i2c@fd880000 {
>  		status = "disabled";
>  	};
>  
> +	vop: vop@fdd90000 {
> +		compatible = "rockchip,rk3588-vop";
> +		reg = <0x0 0xfdd90000 0x0 0x4200>, <0x0 0xfdd95000 0x0 0x1000>;
> +		reg-names = "vop", "gamma_lut";
> +		interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH 0>;
> +		clocks = <&cru ACLK_VOP>,
> +			 <&cru HCLK_VOP>,
> +			 <&cru DCLK_VOP0>,
> +			 <&cru DCLK_VOP1>,
> +			 <&cru DCLK_VOP2>,
> +			 <&cru DCLK_VOP3>,
> +			 <&cru PCLK_VOP_ROOT>;
> +		clock-names = "aclk",
> +			      "hclk",
> +			      "dclk_vp0",
> +			      "dclk_vp1",
> +			      "dclk_vp2",
> +			      "dclk_vp3",
> +			      "pclk_vop";
> +		resets = <&cru SRST_A_VOP>,
> +			 <&cru SRST_H_VOP>,
> +			 <&cru SRST_D_VOP0>,
> +			 <&cru SRST_D_VOP1>,
> +			 <&cru SRST_D_VOP2>,
> +			 <&cru SRST_D_VOP3>;
> +		reset-names = "axi",
> +			      "ahb",
> +			      "dclk_vp0",
> +			      "dclk_vp1",
> +			      "dclk_vp2",
> +			      "dclk_vp3";

resets and reset-names do not seem to be part of the binding, so
should probably be added there.


> +		iommus = <&vop_mmu>;
> +		power-domains = <&power RK3588_PD_VOP>;
> +		rockchip,grf = <&sys_grf>;
> +		rockchip,vop-grf = <&vop_grf>;
> +		rockchip,vo1-grf = <&vo1_grf>;
> +		rockchip,pmu = <&pmu>;
> +

move this blank line _below_ the status=disabled please.

> +		status = "disabled";
> +		vop_out: ports {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			vp0: port@0 {
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				reg = <0>;
> +			};
> +
> +			vp1: port@1 {
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				reg = <1>;
> +			};
> +
> +			vp2: port@2 {
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				reg = <2>;
> +			};
> +
> +			vp3: port@3 {
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				reg = <3>;
> +			};
> +		};
> +	};
> +
> +	vop_mmu: iommu@fdd97e00 {
> +		compatible = "rockchip,rk3588-iommu", "rockchip,rk3568-iommu";
> +		reg = <0x0 0xfdd97e00 0x0 0x100>, <0x0 0xfdd97f00 0x0 0x100>;
> +		interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH 0>;
> +		interrupt-names = "vop_mmu";

interrupt-names is not part of the mainline iommu binding, so should be dropped


Thanks
Heiko
Andy Yan Dec. 9, 2023, 1:28 a.m. UTC | #2 
Hi Heiko:

On 12/9/23 00:26, Heiko Stübner wrote:
> Hi Andy,
> 
> Am Donnerstag, 7. Dezember 2023, 09:02:47 CET schrieb Andy Yan:
>> From: Andy Yan <andy.yan@rock-chips.com>
>>
>> Add vop dt node for rk3588.
>>
>> Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
>> ---
>>
>> (no changes since v1)
>>
>>   arch/arm64/boot/dts/rockchip/rk3588s.dtsi | 96 +++++++++++++++++++++++
>>   1 file changed, 96 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
>> index 7064c0e9179f..a9810ca78dc4 100644
>> --- a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
>> +++ b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
>> @@ -593,6 +608,87 @@ i2c0: i2c@fd880000 {
>>   		status = "disabled";
>>   	};
>>   
>> +	vop: vop@fdd90000 {
>> +		compatible = "rockchip,rk3588-vop";
>> +		reg = <0x0 0xfdd90000 0x0 0x4200>, <0x0 0xfdd95000 0x0 0x1000>;
>> +		reg-names = "vop", "gamma_lut";
>> +		interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH 0>;
>> +		clocks = <&cru ACLK_VOP>,
>> +			 <&cru HCLK_VOP>,
>> +			 <&cru DCLK_VOP0>,
>> +			 <&cru DCLK_VOP1>,
>> +			 <&cru DCLK_VOP2>,
>> +			 <&cru DCLK_VOP3>,
>> +			 <&cru PCLK_VOP_ROOT>;
>> +		clock-names = "aclk",
>> +			      "hclk",
>> +			      "dclk_vp0",
>> +			      "dclk_vp1",
>> +			      "dclk_vp2",
>> +			      "dclk_vp3",
>> +			      "pclk_vop";
>> +		resets = <&cru SRST_A_VOP>,
>> +			 <&cru SRST_H_VOP>,
>> +			 <&cru SRST_D_VOP0>,
>> +			 <&cru SRST_D_VOP1>,
>> +			 <&cru SRST_D_VOP2>,
>> +			 <&cru SRST_D_VOP3>;
>> +		reset-names = "axi",
>> +			      "ahb",
>> +			      "dclk_vp0",
>> +			      "dclk_vp1",
>> +			      "dclk_vp2",
>> +			      "dclk_vp3";
> 
> resets and reset-names do not seem to be part of the binding, so
> should probably be added there.

I will drop resets and reset-names in next version.
> 
> 
>> +		iommus = <&vop_mmu>;
>> +		power-domains = <&power RK3588_PD_VOP>;
>> +		rockchip,grf = <&sys_grf>;
>> +		rockchip,vop-grf = <&vop_grf>;
>> +		rockchip,vo1-grf = <&vo1_grf>;
>> +		rockchip,pmu = <&pmu>;
>> +
> 
> move this blank line _below_ the status=disabled please.

ok, will do.
> 
>> +		status = "disabled";
>> +		vop_out: ports {
>> +			#address-cells = <1>;
>> +			#size-cells = <0>;
>> +
>> +			vp0: port@0 {
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				reg = <0>;
>> +			};
>> +
>> +			vp1: port@1 {
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				reg = <1>;
>> +			};
>> +
>> +			vp2: port@2 {
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				reg = <2>;
>> +			};
>> +
>> +			vp3: port@3 {
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				reg = <3>;
>> +			};
>> +		};
>> +	};
>> +
>> +	vop_mmu: iommu@fdd97e00 {
>> +		compatible = "rockchip,rk3588-iommu", "rockchip,rk3568-iommu";
>> +		reg = <0x0 0xfdd97e00 0x0 0x100>, <0x0 0xfdd97f00 0x0 0x100>;
>> +		interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH 0>;
>> +		interrupt-names = "vop_mmu";
> 
> interrupt-names is not part of the mainline iommu binding, so should be dropped

will do.
> 
> 
> Thanks
> Heiko
> 
>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
index 7064c0e9179f..a9810ca78dc4 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
@@ -362,6 +362,11 @@  spll: clock-0 {
 		#clock-cells = <0>;
 	};
 
+	display_subsystem: display-subsystem {
+		compatible = "rockchip,display-subsystem";
+		ports = <&vop_out>;
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH 0>,
@@ -474,6 +479,16 @@  sys_grf: syscon@fd58c000 {
 		reg = <0x0 0xfd58c000 0x0 0x1000>;
 	};
 
+	vop_grf: syscon@fd5a4000 {
+		compatible = "rockchip,rk3588-vop-grf", "syscon";
+		reg = <0x0 0xfd5a4000 0x0 0x2000>;
+	};
+
+	vo1_grf: syscon@fd5a8000 {
+		compatible = "rockchip,rk3588-vo-grf", "syscon";
+		reg = <0x0 0xfd5a8000 0x0 0x100>;
+	};
+
 	php_grf: syscon@fd5b0000 {
 		compatible = "rockchip,rk3588-php-grf", "syscon";
 		reg = <0x0 0xfd5b0000 0x0 0x1000>;
@@ -593,6 +608,87 @@  i2c0: i2c@fd880000 {
 		status = "disabled";
 	};
 
+	vop: vop@fdd90000 {
+		compatible = "rockchip,rk3588-vop";
+		reg = <0x0 0xfdd90000 0x0 0x4200>, <0x0 0xfdd95000 0x0 0x1000>;
+		reg-names = "vop", "gamma_lut";
+		interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru ACLK_VOP>,
+			 <&cru HCLK_VOP>,
+			 <&cru DCLK_VOP0>,
+			 <&cru DCLK_VOP1>,
+			 <&cru DCLK_VOP2>,
+			 <&cru DCLK_VOP3>,
+			 <&cru PCLK_VOP_ROOT>;
+		clock-names = "aclk",
+			      "hclk",
+			      "dclk_vp0",
+			      "dclk_vp1",
+			      "dclk_vp2",
+			      "dclk_vp3",
+			      "pclk_vop";
+		resets = <&cru SRST_A_VOP>,
+			 <&cru SRST_H_VOP>,
+			 <&cru SRST_D_VOP0>,
+			 <&cru SRST_D_VOP1>,
+			 <&cru SRST_D_VOP2>,
+			 <&cru SRST_D_VOP3>;
+		reset-names = "axi",
+			      "ahb",
+			      "dclk_vp0",
+			      "dclk_vp1",
+			      "dclk_vp2",
+			      "dclk_vp3";
+		iommus = <&vop_mmu>;
+		power-domains = <&power RK3588_PD_VOP>;
+		rockchip,grf = <&sys_grf>;
+		rockchip,vop-grf = <&vop_grf>;
+		rockchip,vo1-grf = <&vo1_grf>;
+		rockchip,pmu = <&pmu>;
+
+		status = "disabled";
+		vop_out: ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			vp0: port@0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0>;
+			};
+
+			vp1: port@1 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <1>;
+			};
+
+			vp2: port@2 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <2>;
+			};
+
+			vp3: port@3 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <3>;
+			};
+		};
+	};
+
+	vop_mmu: iommu@fdd97e00 {
+		compatible = "rockchip,rk3588-iommu", "rockchip,rk3568-iommu";
+		reg = <0x0 0xfdd97e00 0x0 0x100>, <0x0 0xfdd97f00 0x0 0x100>;
+		interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH 0>;
+		interrupt-names = "vop_mmu";
+		clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>;
+		clock-names = "aclk", "iface";
+		#iommu-cells = <0>;
+		power-domains = <&power RK3588_PD_VOP>;
+		status = "disabled";
+	};
+
 	uart0: serial@fd890000 {
 		compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart";
 		reg = <0x0 0xfd890000 0x0 0x100>;