| Message ID | 20231207141723.108004-9-dario.binacchi@amarulasolutions.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add displays support for bsh-smm-s2/pro boards | expand |
On 07/12/2023 15:16, Dario Binacchi wrote: > From: Michael Trimarchi <michael@amarulasolutions.com> > > The GPM1790A0 panel is based on the Ilitek ILI9805 Controller. > Add a driver for it. > > Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> > Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> > > --- > > (no changes since v4) > > Changes in v4: > - Remove duplicated code for prepare/unprepare callbacks > > MAINTAINERS | 6 + > drivers/gpu/drm/panel/Kconfig | 9 + > drivers/gpu/drm/panel/Makefile | 1 + > drivers/gpu/drm/panel/panel-ilitek-ili9805.c | 353 +++++++++++++++++++ > 4 files changed, 369 insertions(+) > create mode 100644 drivers/gpu/drm/panel/panel-ilitek-ili9805.c > > diff --git a/MAINTAINERS b/MAINTAINERS > index b82dc141d209..4dccc72a0ed6 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -6646,6 +6646,12 @@ T: git git://anongit.freedesktop.org/drm/drm-misc > F: Documentation/devicetree/bindings/display/ilitek,ili9486.yaml > F: drivers/gpu/drm/tiny/ili9486.c > > +DRM DRIVER FOR ILITEK ILI9805 PANELS > +M: Michael Trimarchi <michael@amarulasolutions.com> > +S: Maintained > +F: Documentation/devicetree/bindings/display/panel/ilitek,ili9805.yaml > +F: drivers/gpu/drm/panel/panel-ilitek-ili9805.c > + > DRM DRIVER FOR JADARD JD9365DA-H3 MIPI-DSI LCD PANELS > M: Jagan Teki <jagan@edgeble.ai> > S: Maintained > diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig > index d018702be3dc..dad938cf6dec 100644 > --- a/drivers/gpu/drm/panel/Kconfig > +++ b/drivers/gpu/drm/panel/Kconfig > @@ -194,6 +194,15 @@ config DRM_PANEL_ILITEK_ILI9341 > QVGA (240x320) RGB panels. support serial & parallel rgb > interface. > > +config DRM_PANEL_ILITEK_ILI9805 > + tristate "Ilitek ILI9805-based panels" > + depends on OF > + depends on DRM_MIPI_DSI > + depends on BACKLIGHT_CLASS_DEVICE > + help > + Say Y if you want to enable support for panels based on the > + Ilitek ILI9805 controller. > + > config DRM_PANEL_ILITEK_ILI9881C > tristate "Ilitek ILI9881C-based panels" > depends on OF > diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile > index f267d932c2b5..d94a644d0a6c 100644 > --- a/drivers/gpu/drm/panel/Makefile > +++ b/drivers/gpu/drm/panel/Makefile > @@ -17,6 +17,7 @@ obj-$(CONFIG_DRM_PANEL_FEIYANG_FY07024DI26A30D) += panel-feiyang-fy07024di26a30d > obj-$(CONFIG_DRM_PANEL_HIMAX_HX8394) += panel-himax-hx8394.o > obj-$(CONFIG_DRM_PANEL_ILITEK_IL9322) += panel-ilitek-ili9322.o > obj-$(CONFIG_DRM_PANEL_ILITEK_ILI9341) += panel-ilitek-ili9341.o > +obj-$(CONFIG_DRM_PANEL_ILITEK_ILI9805) += panel-ilitek-ili9805.o > obj-$(CONFIG_DRM_PANEL_ILITEK_ILI9881C) += panel-ilitek-ili9881c.o > obj-$(CONFIG_DRM_PANEL_ILITEK_ILI9882T) += panel-ilitek-ili9882t.o > obj-$(CONFIG_DRM_PANEL_INNOLUX_EJ030NA) += panel-innolux-ej030na.o > diff --git a/drivers/gpu/drm/panel/panel-ilitek-ili9805.c b/drivers/gpu/drm/panel/panel-ilitek-ili9805.c > new file mode 100644 > index 000000000000..e36984b46e14 > --- /dev/null > +++ b/drivers/gpu/drm/panel/panel-ilitek-ili9805.c > @@ -0,0 +1,353 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright (C) 2020 BSH Hausgerate GmbH > + */ > + > +#include <linux/delay.h> > +#include <linux/device.h> > +#include <linux/err.h> > +#include <linux/errno.h> > +#include <linux/fb.h> > +#include <linux/kernel.h> > +#include <linux/module.h> > +#include <linux/of_device.h> > + > +#include <linux/gpio/consumer.h> > +#include <linux/regulator/consumer.h> > + > +#include <drm/drm_mipi_dsi.h> > +#include <drm/drm_modes.h> > +#include <drm/drm_panel.h> > + > +#include <video/mipi_display.h> > + > +#define ILI9805_EXTCMD_CMD_SET_ENABLE_REG (0xff) > +#define ILI9805_SETEXTC_PARAMETER1 (0xff) > +#define ILI9805_SETEXTC_PARAMETER2 (0x98) > +#define ILI9805_SETEXTC_PARAMETER3 (0x05) > + > +#define ILI9805_INSTR(_delay, ...) { \ > + .delay = (_delay), \ > + .len = sizeof((u8[]) {__VA_ARGS__}), \ > + .data = (u8[]){__VA_ARGS__} \ > + } > + > +struct ili9805_instr { > + size_t len; > + const u8 *data; > + u32 delay; > +}; > + > +struct ili9805_desc { > + const char *name; > + const struct ili9805_instr *init; > + const size_t init_length; > + const struct drm_display_mode *mode; > + u32 width_mm; > + u32 height_mm; > +}; > + > +struct ili9805 { > + struct drm_panel panel; > + struct mipi_dsi_device *dsi; > + const struct ili9805_desc *desc; > + > + struct regulator *dvdd; > + struct regulator *avdd; > + struct gpio_desc *reset_gpio; > +}; > + > +static const struct ili9805_instr gpm1780a0_init[] = { > + ILI9805_INSTR(100, ILI9805_EXTCMD_CMD_SET_ENABLE_REG, ILI9805_SETEXTC_PARAMETER1, > + ILI9805_SETEXTC_PARAMETER2, ILI9805_SETEXTC_PARAMETER3), > + ILI9805_INSTR(100, 0xFD, 0x0F, 0x10, 0x44, 0x00), > + ILI9805_INSTR(0, 0xf8, 0x18, 0x02, 0x02, 0x18, 0x02, 0x02, 0x30, 0x00, > + 0x00, 0x30, 0x00, 0x00, 0x30, 0x00, 0x00), > + ILI9805_INSTR(0, 0xB8, 0x62), > + ILI9805_INSTR(0, 0xF1, 0x00), > + ILI9805_INSTR(0, 0xF2, 0x00, 0x58, 0x40), > + ILI9805_INSTR(0, 0xF3, 0x60, 0x83, 0x04), > + ILI9805_INSTR(0, 0xFC, 0x04, 0x0F, 0x01), > + ILI9805_INSTR(0, 0xEB, 0x08, 0x0F), > + ILI9805_INSTR(0, 0xe0, 0x00, 0x08, 0x0d, 0x0e, 0x0e, 0x0d, 0x0a, 0x08, 0x04, > + 0x08, 0x0d, 0x0f, 0x0b, 0x1c, 0x14, 0x0a), > + ILI9805_INSTR(0, 0xe1, 0x00, 0x08, 0x0d, 0x0e, 0x0e, 0x0d, 0x0a, 0x08, 0x04, > + 0x08, 0x0d, 0x0f, 0x0b, 0x1c, 0x14, 0x0a), > + ILI9805_INSTR(10, 0xc1, 0x13, 0x39, 0x19, 0x06), > + ILI9805_INSTR(10, 0xc7, 0xe5), > + ILI9805_INSTR(10, 0xB1, 0x00, 0x12, 0x14), > + ILI9805_INSTR(10, 0xB4, 0x02), > + ILI9805_INSTR(0, 0xBB, 0x14, 0x55), > + ILI9805_INSTR(0, MIPI_DCS_SET_ADDRESS_MODE, 0x08), > + ILI9805_INSTR(0, MIPI_DCS_SET_PIXEL_FORMAT, 0x77), > + ILI9805_INSTR(0, 0x20), > + ILI9805_INSTR(0, 0xB0, 0x01), > + ILI9805_INSTR(0, 0xB6, 0x31, 0x00, 0xef), > + ILI9805_INSTR(0, 0xDF, 0x23), > + ILI9805_INSTR(0, 0xB9, 0x02, 0x00), > +}; > + > +static inline struct ili9805 *panel_to_ili9805(struct drm_panel *panel) > +{ > + return container_of(panel, struct ili9805, panel); > +} > + > +static int ili9805_power_on(struct ili9805 *ctx) > +{ > + struct mipi_dsi_device *dsi = ctx->dsi; > + struct device *dev = &dsi->dev; > + int ret; > + > + ret = regulator_enable(ctx->avdd); > + if (ret) { > + dev_err(dev, "Failed to enable avdd regulator (%d)\n", ret); > + return ret; > + } > + > + ret = regulator_enable(ctx->dvdd); > + if (ret) { > + dev_err(dev, "Failed to enable dvdd regulator (%d)\n", ret); > + regulator_disable(ctx->avdd); > + return ret; > + } > + > + gpiod_set_value(ctx->reset_gpio, 0); > + usleep_range(5000, 10000); > + gpiod_set_value(ctx->reset_gpio, 1); > + msleep(120); > + > + return 0; > +} > + > +static int ili9805_power_off(struct ili9805 *ctx) > +{ > + gpiod_set_value(ctx->reset_gpio, 0); > + regulator_disable(ctx->dvdd); > + regulator_disable(ctx->avdd); > + > + return 0; > +} > + > +static int ili9805_activate(struct ili9805 *ctx) > +{ > + struct mipi_dsi_device *dsi = ctx->dsi; > + struct device *dev = &dsi->dev; > + int i, ret; > + > + for (i = 0; i < ctx->desc->init_length; i++) { > + const struct ili9805_instr *instr = &ctx->desc->init[i]; > + > + ret = mipi_dsi_dcs_write_buffer(ctx->dsi, instr->data, instr->len); > + if (ret < 0) > + return ret; > + > + if (instr->delay > 0) > + msleep(instr->delay); > + } > + > + ret = mipi_dsi_dcs_exit_sleep_mode(ctx->dsi); > + if (ret) { > + dev_err(dev, "Failed to exit sleep mode (%d)\n", ret); > + return ret; > + } > + > + usleep_range(5000, 6000); > + > + ret = mipi_dsi_dcs_set_display_on(ctx->dsi); > + if (ret) { > + dev_err(dev, "Failed to set display ON (%d)\n", ret); > + return ret; > + } > + > + return 0; > +} > + > +static int ili9805_prepare(struct drm_panel *panel) > +{ > + struct ili9805 *ctx = panel_to_ili9805(panel); > + int ret; > + > + ret = ili9805_power_on(ctx); > + if (ret) > + return ret; > + > + ret = ili9805_activate(ctx); > + if (ret) { > + ili9805_power_off(ctx); > + return ret; > + } > + > + return 0; > +} > + > +static int ili9805_deactivate(struct ili9805 *ctx) > +{ > + struct mipi_dsi_device *dsi = ctx->dsi; > + struct device *dev = &dsi->dev; > + int ret; > + > + ret = mipi_dsi_dcs_set_display_off(ctx->dsi); > + if (ret < 0) { > + dev_err(dev, "Failed to set display OFF (%d)\n", ret); > + return ret; > + } > + > + usleep_range(5000, 10000); > + > + ret = mipi_dsi_dcs_enter_sleep_mode(ctx->dsi); > + if (ret < 0) { > + dev_err(dev, "Failed to enter sleep mode (%d)\n", ret); > + return ret; > + } > + > + return 0; > +} > + > +static int ili9805_unprepare(struct drm_panel *panel) > +{ > + struct ili9805 *ctx = panel_to_ili9805(panel); > + > + ili9805_deactivate(ctx); > + ili9805_power_off(ctx); > + > + return 0; > +} > + > +static const struct drm_display_mode gpm1780a0_timing = { > + .clock = 26227, > + > + .hdisplay = 480, > + .hsync_start = 480 + 10, > + .hsync_end = 480 + 10 + 2, > + .htotal = 480 + 10 + 2 + 36, > + > + .vdisplay = 480, > + .vsync_start = 480 + 2, > + .vsync_end = 480 + 10 + 4, > + .vtotal = 480 + 2 + 4 + 10, > +}; > + > +static int ili9805_get_modes(struct drm_panel *panel, > + struct drm_connector *connector) > +{ > + struct ili9805 *ctx = panel_to_ili9805(panel); > + struct drm_display_mode *mode; > + > + mode = drm_mode_duplicate(connector->dev, ctx->desc->mode); > + if (!mode) { > + dev_err(&ctx->dsi->dev, "failed to add mode %ux%ux@%u\n", > + ctx->desc->mode->hdisplay, > + ctx->desc->mode->vdisplay, > + drm_mode_vrefresh(ctx->desc->mode)); > + return -ENOMEM; > + } > + > + drm_mode_set_name(mode); > + > + mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED; > + drm_mode_probed_add(connector, mode); > + > + connector->display_info.width_mm = mode->width_mm; > + connector->display_info.height_mm = mode->height_mm; > + > + return 1; > +} > + > +static const struct drm_panel_funcs ili9805_funcs = { > + .prepare = ili9805_prepare, > + .unprepare = ili9805_unprepare, > + .get_modes = ili9805_get_modes, > +}; > + > +static int ili9805_dsi_probe(struct mipi_dsi_device *dsi) > +{ > + struct ili9805 *ctx; > + int ret; > + > + ctx = devm_kzalloc(&dsi->dev, sizeof(*ctx), GFP_KERNEL); > + if (!ctx) > + return -ENOMEM; > + mipi_dsi_set_drvdata(dsi, ctx); > + ctx->dsi = dsi; > + ctx->desc = of_device_get_match_data(&dsi->dev); > + > + dsi->format = MIPI_DSI_FMT_RGB888; > + dsi->mode_flags = MIPI_DSI_MODE_VIDEO_HSE | MIPI_DSI_MODE_VIDEO | > + MIPI_DSI_CLOCK_NON_CONTINUOUS | MIPI_DSI_MODE_LPM | > + MIPI_DSI_MODE_VIDEO_SYNC_PULSE | MIPI_DSI_MODE_NO_EOT_PACKET; > + dsi->lanes = 2; > + > + drm_panel_init(&ctx->panel, &dsi->dev, &ili9805_funcs, > + DRM_MODE_CONNECTOR_DSI); > + > + ctx->dvdd = devm_regulator_get(&dsi->dev, "dvdd"); > + if (IS_ERR(ctx->dvdd)) > + return PTR_ERR(ctx->dvdd); > + ctx->avdd = devm_regulator_get(&dsi->dev, "avdd"); > + if (IS_ERR(ctx->avdd)) > + return PTR_ERR(ctx->avdd); > + > + ctx->reset_gpio = devm_gpiod_get(&dsi->dev, "reset", GPIOD_OUT_LOW); > + if (IS_ERR(ctx->reset_gpio)) { > + dev_err(&dsi->dev, "Couldn't get our reset GPIO\n"); > + return PTR_ERR(ctx->reset_gpio); > + } > + > + ctx->panel.prepare_prev_first = true; > + ret = drm_panel_of_backlight(&ctx->panel); > + if (ret) > + return ret; > + > + drm_panel_add(&ctx->panel); > + > + ret = mipi_dsi_attach(dsi); > + if (ret < 0) { > + dev_err(&dsi->dev, "mipi_dsi_attach failed: %d\n", ret); > + drm_panel_remove(&ctx->panel); > + return ret; > + } > + > + return 0; > +} > + > +static void ili9805_dsi_remove(struct mipi_dsi_device *dsi) > +{ > + struct ili9805 *ctx = mipi_dsi_get_drvdata(dsi); > + int ret; > + > + ret = mipi_dsi_detach(dsi); > + if (ret < 0) > + dev_err(&dsi->dev, "failed to detach from DSI host: %d\n", > + ret); > + > + drm_panel_remove(&ctx->panel); > +} > + > +static const struct ili9805_desc gpm1780a0_desc = { > + .init = gpm1780a0_init, > + .init_length = ARRAY_SIZE(gpm1780a0_init), > + .mode = &gpm1780a0_timing, > + .width_mm = 65, > + .height_mm = 65, > +}; > + > +static const struct of_device_id ili9805_of_match[] = { > + { .compatible = "giantplus,gpm1790a0", .data = &gpm1780a0_desc }, > + { } > +}; > +MODULE_DEVICE_TABLE(of, ili9805_of_match); > + > +static struct mipi_dsi_driver ili9805_dsi_driver = { > + .probe = ili9805_dsi_probe, > + .remove = ili9805_dsi_remove, > + .driver = { > + .name = "ili9805-dsi", > + .of_match_table = ili9805_of_match, > + }, > +}; > +module_mipi_dsi_driver(ili9805_dsi_driver); > + > +MODULE_AUTHOR("Matthias Proske <Matthias.Proske@bshg.com>"); > +MODULE_AUTHOR("Michael Trimarchi <michael@amarulasolutions.com>"); > +MODULE_DESCRIPTION("Ilitek ILI9805 Controller Driver"); > +MODULE_LICENSE("GPL"); Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
On Thu, Dec 7, 2023 at 8:17 AM Dario Binacchi <dario.binacchi@amarulasolutions.com> wrote: > > From: Michael Trimarchi <michael@amarulasolutions.com> > > The GPM1790A0 panel is based on the Ilitek ILI9805 Controller. > Add a driver for it. > > Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> > Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> > > --- > > (no changes since v4) > > Changes in v4: > - Remove duplicated code for prepare/unprepare callbacks > > MAINTAINERS | 6 + > drivers/gpu/drm/panel/Kconfig | 9 + > drivers/gpu/drm/panel/Makefile | 1 + > drivers/gpu/drm/panel/panel-ilitek-ili9805.c | 353 +++++++++++++++++++ > 4 files changed, 369 insertions(+) > create mode 100644 drivers/gpu/drm/panel/panel-ilitek-ili9805.c > > diff --git a/MAINTAINERS b/MAINTAINERS > index b82dc141d209..4dccc72a0ed6 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -6646,6 +6646,12 @@ T: git git://anongit.freedesktop.org/drm/drm-misc > F: Documentation/devicetree/bindings/display/ilitek,ili9486.yaml > F: drivers/gpu/drm/tiny/ili9486.c > > +DRM DRIVER FOR ILITEK ILI9805 PANELS > +M: Michael Trimarchi <michael@amarulasolutions.com> > +S: Maintained > +F: Documentation/devicetree/bindings/display/panel/ilitek,ili9805.yaml > +F: drivers/gpu/drm/panel/panel-ilitek-ili9805.c > + > DRM DRIVER FOR JADARD JD9365DA-H3 MIPI-DSI LCD PANELS > M: Jagan Teki <jagan@edgeble.ai> > S: Maintained > diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig > index d018702be3dc..dad938cf6dec 100644 > --- a/drivers/gpu/drm/panel/Kconfig > +++ b/drivers/gpu/drm/panel/Kconfig > @@ -194,6 +194,15 @@ config DRM_PANEL_ILITEK_ILI9341 > QVGA (240x320) RGB panels. support serial & parallel rgb > interface. > > +config DRM_PANEL_ILITEK_ILI9805 > + tristate "Ilitek ILI9805-based panels" > + depends on OF > + depends on DRM_MIPI_DSI > + depends on BACKLIGHT_CLASS_DEVICE > + help > + Say Y if you want to enable support for panels based on the > + Ilitek ILI9805 controller. > + > config DRM_PANEL_ILITEK_ILI9881C > tristate "Ilitek ILI9881C-based panels" > depends on OF > diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile > index f267d932c2b5..d94a644d0a6c 100644 > --- a/drivers/gpu/drm/panel/Makefile > +++ b/drivers/gpu/drm/panel/Makefile > @@ -17,6 +17,7 @@ obj-$(CONFIG_DRM_PANEL_FEIYANG_FY07024DI26A30D) += panel-feiyang-fy07024di26a30d > obj-$(CONFIG_DRM_PANEL_HIMAX_HX8394) += panel-himax-hx8394.o > obj-$(CONFIG_DRM_PANEL_ILITEK_IL9322) += panel-ilitek-ili9322.o > obj-$(CONFIG_DRM_PANEL_ILITEK_ILI9341) += panel-ilitek-ili9341.o > +obj-$(CONFIG_DRM_PANEL_ILITEK_ILI9805) += panel-ilitek-ili9805.o > obj-$(CONFIG_DRM_PANEL_ILITEK_ILI9881C) += panel-ilitek-ili9881c.o > obj-$(CONFIG_DRM_PANEL_ILITEK_ILI9882T) += panel-ilitek-ili9882t.o > obj-$(CONFIG_DRM_PANEL_INNOLUX_EJ030NA) += panel-innolux-ej030na.o > diff --git a/drivers/gpu/drm/panel/panel-ilitek-ili9805.c b/drivers/gpu/drm/panel/panel-ilitek-ili9805.c > new file mode 100644 > index 000000000000..e36984b46e14 > --- /dev/null > +++ b/drivers/gpu/drm/panel/panel-ilitek-ili9805.c > @@ -0,0 +1,353 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright (C) 2020 BSH Hausgerate GmbH > + */ > + > +#include <linux/delay.h> > +#include <linux/device.h> > +#include <linux/err.h> > +#include <linux/errno.h> > +#include <linux/fb.h> > +#include <linux/kernel.h> > +#include <linux/module.h> > +#include <linux/of_device.h> You probably don't need this header and the implicit includes it makes are dropped now in linux-next. Please check what you actually need and make them explicit. Rob
diff --git a/MAINTAINERS b/MAINTAINERS index b82dc141d209..4dccc72a0ed6 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -6646,6 +6646,12 @@ T: git git://anongit.freedesktop.org/drm/drm-misc F: Documentation/devicetree/bindings/display/ilitek,ili9486.yaml F: drivers/gpu/drm/tiny/ili9486.c +DRM DRIVER FOR ILITEK ILI9805 PANELS +M: Michael Trimarchi <michael@amarulasolutions.com> +S: Maintained +F: Documentation/devicetree/bindings/display/panel/ilitek,ili9805.yaml +F: drivers/gpu/drm/panel/panel-ilitek-ili9805.c + DRM DRIVER FOR JADARD JD9365DA-H3 MIPI-DSI LCD PANELS M: Jagan Teki <jagan@edgeble.ai> S: Maintained diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig index d018702be3dc..dad938cf6dec 100644 --- a/drivers/gpu/drm/panel/Kconfig +++ b/drivers/gpu/drm/panel/Kconfig @@ -194,6 +194,15 @@ config DRM_PANEL_ILITEK_ILI9341 QVGA (240x320) RGB panels. support serial & parallel rgb interface. +config DRM_PANEL_ILITEK_ILI9805 + tristate "Ilitek ILI9805-based panels" + depends on OF + depends on DRM_MIPI_DSI + depends on BACKLIGHT_CLASS_DEVICE + help + Say Y if you want to enable support for panels based on the + Ilitek ILI9805 controller. + config DRM_PANEL_ILITEK_ILI9881C tristate "Ilitek ILI9881C-based panels" depends on OF diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile index f267d932c2b5..d94a644d0a6c 100644 --- a/drivers/gpu/drm/panel/Makefile +++ b/drivers/gpu/drm/panel/Makefile @@ -17,6 +17,7 @@ obj-$(CONFIG_DRM_PANEL_FEIYANG_FY07024DI26A30D) += panel-feiyang-fy07024di26a30d obj-$(CONFIG_DRM_PANEL_HIMAX_HX8394) += panel-himax-hx8394.o obj-$(CONFIG_DRM_PANEL_ILITEK_IL9322) += panel-ilitek-ili9322.o obj-$(CONFIG_DRM_PANEL_ILITEK_ILI9341) += panel-ilitek-ili9341.o +obj-$(CONFIG_DRM_PANEL_ILITEK_ILI9805) += panel-ilitek-ili9805.o obj-$(CONFIG_DRM_PANEL_ILITEK_ILI9881C) += panel-ilitek-ili9881c.o obj-$(CONFIG_DRM_PANEL_ILITEK_ILI9882T) += panel-ilitek-ili9882t.o obj-$(CONFIG_DRM_PANEL_INNOLUX_EJ030NA) += panel-innolux-ej030na.o diff --git a/drivers/gpu/drm/panel/panel-ilitek-ili9805.c b/drivers/gpu/drm/panel/panel-ilitek-ili9805.c new file mode 100644 index 000000000000..e36984b46e14 --- /dev/null +++ b/drivers/gpu/drm/panel/panel-ilitek-ili9805.c @@ -0,0 +1,353 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2020 BSH Hausgerate GmbH + */ + +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/err.h> +#include <linux/errno.h> +#include <linux/fb.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of_device.h> + +#include <linux/gpio/consumer.h> +#include <linux/regulator/consumer.h> + +#include <drm/drm_mipi_dsi.h> +#include <drm/drm_modes.h> +#include <drm/drm_panel.h> + +#include <video/mipi_display.h> + +#define ILI9805_EXTCMD_CMD_SET_ENABLE_REG (0xff) +#define ILI9805_SETEXTC_PARAMETER1 (0xff) +#define ILI9805_SETEXTC_PARAMETER2 (0x98) +#define ILI9805_SETEXTC_PARAMETER3 (0x05) + +#define ILI9805_INSTR(_delay, ...) { \ + .delay = (_delay), \ + .len = sizeof((u8[]) {__VA_ARGS__}), \ + .data = (u8[]){__VA_ARGS__} \ + } + +struct ili9805_instr { + size_t len; + const u8 *data; + u32 delay; +}; + +struct ili9805_desc { + const char *name; + const struct ili9805_instr *init; + const size_t init_length; + const struct drm_display_mode *mode; + u32 width_mm; + u32 height_mm; +}; + +struct ili9805 { + struct drm_panel panel; + struct mipi_dsi_device *dsi; + const struct ili9805_desc *desc; + + struct regulator *dvdd; + struct regulator *avdd; + struct gpio_desc *reset_gpio; +}; + +static const struct ili9805_instr gpm1780a0_init[] = { + ILI9805_INSTR(100, ILI9805_EXTCMD_CMD_SET_ENABLE_REG, ILI9805_SETEXTC_PARAMETER1, + ILI9805_SETEXTC_PARAMETER2, ILI9805_SETEXTC_PARAMETER3), + ILI9805_INSTR(100, 0xFD, 0x0F, 0x10, 0x44, 0x00), + ILI9805_INSTR(0, 0xf8, 0x18, 0x02, 0x02, 0x18, 0x02, 0x02, 0x30, 0x00, + 0x00, 0x30, 0x00, 0x00, 0x30, 0x00, 0x00), + ILI9805_INSTR(0, 0xB8, 0x62), + ILI9805_INSTR(0, 0xF1, 0x00), + ILI9805_INSTR(0, 0xF2, 0x00, 0x58, 0x40), + ILI9805_INSTR(0, 0xF3, 0x60, 0x83, 0x04), + ILI9805_INSTR(0, 0xFC, 0x04, 0x0F, 0x01), + ILI9805_INSTR(0, 0xEB, 0x08, 0x0F), + ILI9805_INSTR(0, 0xe0, 0x00, 0x08, 0x0d, 0x0e, 0x0e, 0x0d, 0x0a, 0x08, 0x04, + 0x08, 0x0d, 0x0f, 0x0b, 0x1c, 0x14, 0x0a), + ILI9805_INSTR(0, 0xe1, 0x00, 0x08, 0x0d, 0x0e, 0x0e, 0x0d, 0x0a, 0x08, 0x04, + 0x08, 0x0d, 0x0f, 0x0b, 0x1c, 0x14, 0x0a), + ILI9805_INSTR(10, 0xc1, 0x13, 0x39, 0x19, 0x06), + ILI9805_INSTR(10, 0xc7, 0xe5), + ILI9805_INSTR(10, 0xB1, 0x00, 0x12, 0x14), + ILI9805_INSTR(10, 0xB4, 0x02), + ILI9805_INSTR(0, 0xBB, 0x14, 0x55), + ILI9805_INSTR(0, MIPI_DCS_SET_ADDRESS_MODE, 0x08), + ILI9805_INSTR(0, MIPI_DCS_SET_PIXEL_FORMAT, 0x77), + ILI9805_INSTR(0, 0x20), + ILI9805_INSTR(0, 0xB0, 0x01), + ILI9805_INSTR(0, 0xB6, 0x31, 0x00, 0xef), + ILI9805_INSTR(0, 0xDF, 0x23), + ILI9805_INSTR(0, 0xB9, 0x02, 0x00), +}; + +static inline struct ili9805 *panel_to_ili9805(struct drm_panel *panel) +{ + return container_of(panel, struct ili9805, panel); +} + +static int ili9805_power_on(struct ili9805 *ctx) +{ + struct mipi_dsi_device *dsi = ctx->dsi; + struct device *dev = &dsi->dev; + int ret; + + ret = regulator_enable(ctx->avdd); + if (ret) { + dev_err(dev, "Failed to enable avdd regulator (%d)\n", ret); + return ret; + } + + ret = regulator_enable(ctx->dvdd); + if (ret) { + dev_err(dev, "Failed to enable dvdd regulator (%d)\n", ret); + regulator_disable(ctx->avdd); + return ret; + } + + gpiod_set_value(ctx->reset_gpio, 0); + usleep_range(5000, 10000); + gpiod_set_value(ctx->reset_gpio, 1); + msleep(120); + + return 0; +} + +static int ili9805_power_off(struct ili9805 *ctx) +{ + gpiod_set_value(ctx->reset_gpio, 0); + regulator_disable(ctx->dvdd); + regulator_disable(ctx->avdd); + + return 0; +} + +static int ili9805_activate(struct ili9805 *ctx) +{ + struct mipi_dsi_device *dsi = ctx->dsi; + struct device *dev = &dsi->dev; + int i, ret; + + for (i = 0; i < ctx->desc->init_length; i++) { + const struct ili9805_instr *instr = &ctx->desc->init[i]; + + ret = mipi_dsi_dcs_write_buffer(ctx->dsi, instr->data, instr->len); + if (ret < 0) + return ret; + + if (instr->delay > 0) + msleep(instr->delay); + } + + ret = mipi_dsi_dcs_exit_sleep_mode(ctx->dsi); + if (ret) { + dev_err(dev, "Failed to exit sleep mode (%d)\n", ret); + return ret; + } + + usleep_range(5000, 6000); + + ret = mipi_dsi_dcs_set_display_on(ctx->dsi); + if (ret) { + dev_err(dev, "Failed to set display ON (%d)\n", ret); + return ret; + } + + return 0; +} + +static int ili9805_prepare(struct drm_panel *panel) +{ + struct ili9805 *ctx = panel_to_ili9805(panel); + int ret; + + ret = ili9805_power_on(ctx); + if (ret) + return ret; + + ret = ili9805_activate(ctx); + if (ret) { + ili9805_power_off(ctx); + return ret; + } + + return 0; +} + +static int ili9805_deactivate(struct ili9805 *ctx) +{ + struct mipi_dsi_device *dsi = ctx->dsi; + struct device *dev = &dsi->dev; + int ret; + + ret = mipi_dsi_dcs_set_display_off(ctx->dsi); + if (ret < 0) { + dev_err(dev, "Failed to set display OFF (%d)\n", ret); + return ret; + } + + usleep_range(5000, 10000); + + ret = mipi_dsi_dcs_enter_sleep_mode(ctx->dsi); + if (ret < 0) { + dev_err(dev, "Failed to enter sleep mode (%d)\n", ret); + return ret; + } + + return 0; +} + +static int ili9805_unprepare(struct drm_panel *panel) +{ + struct ili9805 *ctx = panel_to_ili9805(panel); + + ili9805_deactivate(ctx); + ili9805_power_off(ctx); + + return 0; +} + +static const struct drm_display_mode gpm1780a0_timing = { + .clock = 26227, + + .hdisplay = 480, + .hsync_start = 480 + 10, + .hsync_end = 480 + 10 + 2, + .htotal = 480 + 10 + 2 + 36, + + .vdisplay = 480, + .vsync_start = 480 + 2, + .vsync_end = 480 + 10 + 4, + .vtotal = 480 + 2 + 4 + 10, +}; + +static int ili9805_get_modes(struct drm_panel *panel, + struct drm_connector *connector) +{ + struct ili9805 *ctx = panel_to_ili9805(panel); + struct drm_display_mode *mode; + + mode = drm_mode_duplicate(connector->dev, ctx->desc->mode); + if (!mode) { + dev_err(&ctx->dsi->dev, "failed to add mode %ux%ux@%u\n", + ctx->desc->mode->hdisplay, + ctx->desc->mode->vdisplay, + drm_mode_vrefresh(ctx->desc->mode)); + return -ENOMEM; + } + + drm_mode_set_name(mode); + + mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED; + drm_mode_probed_add(connector, mode); + + connector->display_info.width_mm = mode->width_mm; + connector->display_info.height_mm = mode->height_mm; + + return 1; +} + +static const struct drm_panel_funcs ili9805_funcs = { + .prepare = ili9805_prepare, + .unprepare = ili9805_unprepare, + .get_modes = ili9805_get_modes, +}; + +static int ili9805_dsi_probe(struct mipi_dsi_device *dsi) +{ + struct ili9805 *ctx; + int ret; + + ctx = devm_kzalloc(&dsi->dev, sizeof(*ctx), GFP_KERNEL); + if (!ctx) + return -ENOMEM; + mipi_dsi_set_drvdata(dsi, ctx); + ctx->dsi = dsi; + ctx->desc = of_device_get_match_data(&dsi->dev); + + dsi->format = MIPI_DSI_FMT_RGB888; + dsi->mode_flags = MIPI_DSI_MODE_VIDEO_HSE | MIPI_DSI_MODE_VIDEO | + MIPI_DSI_CLOCK_NON_CONTINUOUS | MIPI_DSI_MODE_LPM | + MIPI_DSI_MODE_VIDEO_SYNC_PULSE | MIPI_DSI_MODE_NO_EOT_PACKET; + dsi->lanes = 2; + + drm_panel_init(&ctx->panel, &dsi->dev, &ili9805_funcs, + DRM_MODE_CONNECTOR_DSI); + + ctx->dvdd = devm_regulator_get(&dsi->dev, "dvdd"); + if (IS_ERR(ctx->dvdd)) + return PTR_ERR(ctx->dvdd); + ctx->avdd = devm_regulator_get(&dsi->dev, "avdd"); + if (IS_ERR(ctx->avdd)) + return PTR_ERR(ctx->avdd); + + ctx->reset_gpio = devm_gpiod_get(&dsi->dev, "reset", GPIOD_OUT_LOW); + if (IS_ERR(ctx->reset_gpio)) { + dev_err(&dsi->dev, "Couldn't get our reset GPIO\n"); + return PTR_ERR(ctx->reset_gpio); + } + + ctx->panel.prepare_prev_first = true; + ret = drm_panel_of_backlight(&ctx->panel); + if (ret) + return ret; + + drm_panel_add(&ctx->panel); + + ret = mipi_dsi_attach(dsi); + if (ret < 0) { + dev_err(&dsi->dev, "mipi_dsi_attach failed: %d\n", ret); + drm_panel_remove(&ctx->panel); + return ret; + } + + return 0; +} + +static void ili9805_dsi_remove(struct mipi_dsi_device *dsi) +{ + struct ili9805 *ctx = mipi_dsi_get_drvdata(dsi); + int ret; + + ret = mipi_dsi_detach(dsi); + if (ret < 0) + dev_err(&dsi->dev, "failed to detach from DSI host: %d\n", + ret); + + drm_panel_remove(&ctx->panel); +} + +static const struct ili9805_desc gpm1780a0_desc = { + .init = gpm1780a0_init, + .init_length = ARRAY_SIZE(gpm1780a0_init), + .mode = &gpm1780a0_timing, + .width_mm = 65, + .height_mm = 65, +}; + +static const struct of_device_id ili9805_of_match[] = { + { .compatible = "giantplus,gpm1790a0", .data = &gpm1780a0_desc }, + { } +}; +MODULE_DEVICE_TABLE(of, ili9805_of_match); + +static struct mipi_dsi_driver ili9805_dsi_driver = { + .probe = ili9805_dsi_probe, + .remove = ili9805_dsi_remove, + .driver = { + .name = "ili9805-dsi", + .of_match_table = ili9805_of_match, + }, +}; +module_mipi_dsi_driver(ili9805_dsi_driver); + +MODULE_AUTHOR("Matthias Proske <Matthias.Proske@bshg.com>"); +MODULE_AUTHOR("Michael Trimarchi <michael@amarulasolutions.com>"); +MODULE_DESCRIPTION("Ilitek ILI9805 Controller Driver"); +MODULE_LICENSE("GPL");