From patchwork Thu Jan 11 10:40:45 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Raphael Gallais-Pou X-Patchwork-Id: 13517108 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from gabe.freedesktop.org (gabe.freedesktop.org [131.252.210.177]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id A3B80C47077 for ; Thu, 11 Jan 2024 10:41:32 +0000 (UTC) Received: from gabe.freedesktop.org (localhost [127.0.0.1]) by gabe.freedesktop.org (Postfix) with ESMTP id 0814710E87A; Thu, 11 Jan 2024 10:41:30 +0000 (UTC) Received: from mx07-00178001.pphosted.com (mx07-00178001.pphosted.com [185.132.182.106]) by gabe.freedesktop.org (Postfix) with ESMTPS id 218D710E87A for ; Thu, 11 Jan 2024 10:41:23 +0000 (UTC) Received: from pps.filterd (m0288072.ppops.net [127.0.0.1]) by mx07-00178001.pphosted.com (8.17.1.24/8.17.1.24) with ESMTP id 40B91YTI019501; Thu, 11 Jan 2024 11:41:12 +0100 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=foss.st.com; h= from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-type:content-transfer-encoding; s= selector1; bh=O0GTRGzHq+lXcjuEoVz/Hv58BuKjLq6gAZg49Kmnq/8=; b=xi TmrOgAEuZBDtIbk1N5ngJtd0YnbIqfU0KLuexK9+cWctzxOg6pIHL0qQdWBijYte 4IbFlnBwbTAWTdzBgn/Lsa7gzuOTWBmnlREIGGHvjlRHK5xPqwh1pesmb1GnvioC KS69dYdq5OAFuD+NKKNDq0Lm+H2OnekiN+Xv5mfNTQGPuJ62nE77GflPXmi3naSU yna04EubvuqjuhqCZCt6P0uuosfKjWdkg2olvkDrBKx1FCx8j7mWIId3mFOYMYp1 p6fY6jamEBIOYdiXJw8c6rdVe0uuOsL1t/Km9bBJ34xy4TclB/vrAZ/TrDgGb+6J h1Zs1GPsIFayOt14+yQQ== Received: from beta.dmz-eu.st.com (beta.dmz-eu.st.com [164.129.1.35]) by mx07-00178001.pphosted.com (PPS) with ESMTPS id 3vexpg57t8-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Thu, 11 Jan 2024 11:41:12 +0100 (CET) Received: from euls16034.sgp.st.com (euls16034.sgp.st.com [10.75.44.20]) by beta.dmz-eu.st.com (STMicroelectronics) with ESMTP id 7F3D9100049; Thu, 11 Jan 2024 11:41:11 +0100 (CET) Received: from Webmail-eu.st.com (shfdag1node2.st.com [10.75.129.70]) by euls16034.sgp.st.com (STMicroelectronics) with ESMTP id 746752309E3; Thu, 11 Jan 2024 11:41:11 +0100 (CET) Received: from localhost (10.252.29.122) by SHFDAG1NODE2.st.com (10.75.129.70) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.1.2507.27; Thu, 11 Jan 2024 11:41:08 +0100 From: Raphael Gallais-Pou To: Yannick Fertre , Raphael Gallais-Pou , Philippe Cornu , Maarten Lankhorst , Maxime Ripard , Thomas Zimmermann , David Airlie , Daniel Vetter , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Maxime Coquelin , Alexandre Torgue , Philipp Zabel Subject: [PATCH v2 2/6] drm/stm: lvds: add new STM32 LVDS Display Interface Transmitter driver Date: Thu, 11 Jan 2024 11:40:45 +0100 Message-ID: <20240111104049.38695-3-raphael.gallais-pou@foss.st.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20240111104049.38695-1-raphael.gallais-pou@foss.st.com> References: <20240111104049.38695-1-raphael.gallais-pou@foss.st.com> MIME-Version: 1.0 X-Originating-IP: [10.252.29.122] X-ClientProxiedBy: SHFCAS1NODE1.st.com (10.75.129.72) To SHFDAG1NODE2.st.com (10.75.129.70) X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.272,Aquarius:18.0.997,Hydra:6.0.619,FMLib:17.11.176.26 definitions=2024-01-05_08,2024-01-05_01,2023-05-22_02 X-BeenThere: dri-devel@lists.freedesktop.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: Direct Rendering Infrastructure - Development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-stm32@st-md-mailman.stormreply.com, dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org Errors-To: dri-devel-bounces@lists.freedesktop.org Sender: "dri-devel" The Low-Voltage Differential Signaling (LVDS) Display Interface Transmitter handles the LVDS protocol: it maps the pixels received from the upstream Pixel-DMA LCD-TFT Display Controller (LTDC) onto the LVDS PHY. It regroups three sub blocks: * LVDS host: handles the LVDS protocol (FPD / OpenLDI) and maps its input pixels onto the data lanes of the PHY * LVDS PHY: parallelize the data and drives the LVDS data lanes * LVDS wrapper: handles top-level settings The LVDS controller driver supports the following high-level features: * FDP-Link-I and OpenLDI (v0.95) protocols * Single-Link or Dual-Link operation * Single-Display or Double-Display (with the same content duplicated on both) * Flexible Bit-Mapping, including JEIDA and VESA * RGB888 or RGB666 output * Synchronous design, with one input pixel per clock cycle Signed-off-by: Raphael Gallais-Pou --- Changes in v2: - Fixed Camel Case macros - Removed debug log --- drivers/gpu/drm/stm/Kconfig | 11 + drivers/gpu/drm/stm/Makefile | 2 + drivers/gpu/drm/stm/lvds.c | 1225 ++++++++++++++++++++++++++++++++++ 3 files changed, 1238 insertions(+) create mode 100644 drivers/gpu/drm/stm/lvds.c diff --git a/drivers/gpu/drm/stm/Kconfig b/drivers/gpu/drm/stm/Kconfig index fa49cde43bb2..9627814d027c 100644 --- a/drivers/gpu/drm/stm/Kconfig +++ b/drivers/gpu/drm/stm/Kconfig @@ -20,3 +20,14 @@ config DRM_STM_DSI select DRM_DW_MIPI_DSI help Choose this option for MIPI DSI support on STMicroelectronics SoC. + +config DRM_STM_LVDS + tristate "STMicroelectronics LVDS Display Interface Transmitter DRM driver" + depends on DRM_STM + help + Enable support for LVDS encoders on STMicroelectronics SoC. + The STM LVDS is a bridge which serialize pixel stream onto + a LVDS protocol. + + To compile this driver as a module, choose M here: the module will be + called lvds. diff --git a/drivers/gpu/drm/stm/Makefile b/drivers/gpu/drm/stm/Makefile index 4df5caf01f35..ad740d6175a6 100644 --- a/drivers/gpu/drm/stm/Makefile +++ b/drivers/gpu/drm/stm/Makefile @@ -5,4 +5,6 @@ stm-drm-y := \ obj-$(CONFIG_DRM_STM_DSI) += dw_mipi_dsi-stm.o +obj-$(CONFIG_DRM_STM_LVDS) += lvds.o + obj-$(CONFIG_DRM_STM) += stm-drm.o diff --git a/drivers/gpu/drm/stm/lvds.c b/drivers/gpu/drm/stm/lvds.c new file mode 100644 index 000000000000..beb8b7e437a0 --- /dev/null +++ b/drivers/gpu/drm/stm/lvds.c @@ -0,0 +1,1225 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2023, STMicroelectronics - All Rights Reserved + * Author(s): Raphaël GALLAIS-POU for STMicroelectronics. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include + +/* LVDS Host registers */ +#define LVDS_CR 0x0000 /* configuration register */ +#define LVDS_DMLCR0 0x0004 /* data mapping lsb configuration register 0 */ +#define LVDS_DMMCR0 0x0008 /* data mapping msb configuration register 0 */ +#define LVDS_DMLCR1 0x000C /* data mapping lsb configuration register 1 */ +#define LVDS_DMMCR1 0x0010 /* data mapping msb configuration register 1 */ +#define LVDS_DMLCR2 0x0014 /* data mapping lsb configuration register 2 */ +#define LVDS_DMMCR2 0x0018 /* data mapping msb configuration register 2 */ +#define LVDS_DMLCR3 0x001C /* data mapping lsb configuration register 3 */ +#define LVDS_DMMCR3 0x0020 /* data mapping msb configuration register 3 */ +#define LVDS_DMLCR4 0x0024 /* data mapping lsb configuration register 4 */ +#define LVDS_DMMCR4 0x0028 /* data mapping msb configuration register 4 */ +#define LVDS_CDL1CR 0x002C /* channel distrib link 1 configuration register */ +#define LVDS_CDL2CR 0x0030 /* channel distrib link 2 configuration register */ + +#define CDL1CR_DEFAULT 0x04321 /* Default value for CDL1CR */ +#define CDL2CR_DEFAULT 0x59876 /* Default value for CDL2CR */ + +#define LVDS_DMLCR(bit) (LVDS_DMLCR0 + 0x8 * (bit)) +#define LVDS_DMMCR(bit) (LVDS_DMMCR0 + 0x8 * (bit)) + +/* LVDS Wrapper registers */ +#define LVDS_WCLKCR 0x11B0 /* Wrapper clock control register */ + +#define LVDS_HWCFGR 0x1FF0 /* HW configuration register */ +#define LVDS_VERR 0x1FF4 /* Version register */ +#define LVDS_IPIDR 0x1FF8 /* Identification register */ +#define LVDS_SIDR 0x1FFC /* Size Identification register */ + +/* Bitfield description */ +#define CR_LVDSEN BIT(0) /* LVDS PHY Enable */ +#define CR_HSPOL BIT(1) /* Horizontal Synchronization Polarity */ +#define CR_VSPOL BIT(2) /* Vertical Synchronization Polarity */ +#define CR_DEPOL BIT(3) /* Data Enable Polarity */ +#define CR_CI BIT(4) /* Control Internal (software controlled bit) */ +#define CR_LKMOD BIT(5) /* Link Mode, for both Links */ +#define CR_LKPHA BIT(6) /* Link Phase, for both Links */ +#define CR_LK1POL GENMASK(20, 16) /* Link-1 output Polarity */ +#define CR_LK2POL GENMASK(25, 21) /* Link-2 output Polarity */ + +#define DMMCR_MAP0 GENMASK(4, 0) /* Mapping for bit 0 of datalane x */ +#define DMMCR_MAP1 GENMASK(9, 5) /* Mapping for bit 1 of datalane x */ +#define DMMCR_MAP2 GENMASK(14, 10) /* Mapping for bit 2 of datalane x */ +#define DMMCR_MAP3 GENMASK(19, 15) /* Mapping for bit 3 of datalane x */ +#define DMLCR_MAP4 GENMASK(4, 0) /* Mapping for bit 4 of datalane x */ +#define DMLCR_MAP5 GENMASK(9, 5) /* Mapping for bit 5 of datalane x */ +#define DMLCR_MAP6 GENMASK(14, 10) /* Mapping for bit 6 of datalane x */ + +#define CDLCR_DISTR0 GENMASK(3, 0) /* Channel distribution for lane 0 */ +#define CDLCR_DISTR1 GENMASK(7, 4) /* Channel distribution for lane 1 */ +#define CDLCR_DISTR2 GENMASK(11, 8) /* Channel distribution for lane 2 */ +#define CDLCR_DISTR3 GENMASK(15, 12) /* Channel distribution for lane 3 */ +#define CDLCR_DISTR4 GENMASK(19, 16) /* Channel distribution for lane 4 */ + +#define PHY_GCR_BIT_CLK_OUT BIT(0) /* BIT clock enable */ +#define PHY_GCR_LS_CLK_OUT BIT(4) /* LS clock enable */ +#define PHY_GCR_DP_CLK_OUT BIT(8) /* DP clock enable */ +#define PHY_GCR_RSTZ BIT(24) /* LVDS PHY digital reset */ +#define PHY_GCR_DIV_RSTN BIT(25) /* Output divider reset */ +#define PHY_SCR_TX_EN BIT(16) /* Transmission mode enable */ +/* Current mode driver enable */ +#define PHY_CMCR_CM_EN_DL (BIT(28) | BIT(20) | BIT(12) | BIT(4)) +#define PHY_CMCR_CM_EN_DL4 BIT(4) +/* Bias enable */ +#define PHY_BCR1_EN_BIAS_DL (BIT(16) | BIT(12) | BIT(8) | BIT(4) | BIT(0)) +#define PHY_BCR2_BIAS_EN BIT(28) +/* Voltage mode driver enable */ +#define PHY_BCR3_VM_EN_DL (BIT(16) | BIT(12) | BIT(8) | BIT(4) | BIT(0)) +#define PHY_DCR_POWER_OK BIT(12) +#define PHY_CFGCR_EN_DIG_DL GENMASK(4, 0) /* LVDS PHY digital lane enable */ +#define PHY_PLLCR1_PLL_EN BIT(0) /* LVDS PHY PLL enable */ +#define PHY_PLLCR1_EN_SD BIT(1) /* LVDS PHY PLL sigma-delta signal enable */ +#define PHY_PLLCR1_EN_TWG BIT(2) /* LVDS PHY PLL triangular wave generator enable */ +#define PHY_PLLCR1_DIV_EN BIT(8) /* LVDS PHY PLL dividers enable */ +#define PHY_PLLCR2_NDIV GENMASK(25, 16) /* NDIV mask value */ +#define PHY_PLLCR2_BDIV GENMASK(9, 0) /* BDIV mask value */ +#define PHY_PLLSR_PLL_LOCK BIT(0) /* LVDS PHY PLL lock status */ +#define PHY_PLLSDCR1_MDIV GENMASK(9, 0) /* MDIV mask value */ +#define PHY_PLLTESTCR_TDIV GENMASK(25, 16) /* TDIV mask value */ +#define PHY_PLLTESTCR_CLK_EN BIT(0) /* Test clock enable */ +#define PHY_PLLTESTCR_EN BIT(8) /* Test divider output enable */ + +#define WCLKCR_SECND_CLKPIX_SEL BIT(0) /* Pixel clock selection */ +#define WCLKCR_SRCSEL BIT(8) /* Source selection for the pixel clock */ + +/* Sleep & timeout for pll lock/unlock */ +#define SLEEP_US 1000 +#define TIMEOUT_US 200000 + +/* + * The link phase defines whether an ODD pixel is carried over together with + * the next EVEN pixel or together with the previous EVEN pixel. + * + * LVDS_DUAL_LINK_EVEN_ODD_PIXELS (LKPHA = 0) + * + * ,--------. ,--------. ,--------. ,--------. ,---------. + * | ODD LK \/ PIXEL 3 \/ PIXEL 1 \/ PIXEL' 1 \/ PIXEL' 3 | + * | EVEN LK /\ PIXEL 2 /\ PIXEL' 0 /\ PIXEL' 2 /\ PIXEL' 4 | + * `--------' `--------' `--------' `--------' `---------' + * + * LVDS_DUAL_LINK_ODD_EVEN_PIXELS (LKPHA = 1) + * + * ,--------. ,--------. ,--------. ,--------. ,---------. + * | ODD LK \/ PIXEL 3 \/ PIXEL 1 \/ PIXEL' 1 \/ PIXEL' 3 | + * | EVEN LK /\ PIXEL 4 /\ PIXEL 2 /\ PIXEL' 0 /\ PIXEL' 2 | + * `--------' `--------' `--------' `--------' `---------' + * + */ +enum lvds_link_type { + LVDS_SINGLE_LINK_PRIMARY = 0, + LVDS_SINGLE_LINK_SECONDARY, + LVDS_DUAL_LINK_EVEN_ODD_PIXELS, + LVDS_DUAL_LINK_ODD_EVEN_PIXELS, +}; + +enum lvds_pixel { + PIX_R_0 = 0, + PIX_R_1, + PIX_R_2, + PIX_R_3, + PIX_R_4, + PIX_R_5, + PIX_R_6, + PIX_R_7, + PIX_G_0, + PIX_G_1, + PIX_G_2, + PIX_G_3, + PIX_G_4, + PIX_G_5, + PIX_G_6, + PIX_G_7, + PIX_B_0, + PIX_B_1, + PIX_B_2, + PIX_B_3, + PIX_B_4, + PIX_B_5, + PIX_B_6, + PIX_B_7, + PIX_H_S, + PIX_V_S, + PIX_D_E, + PIX_C_E, + PIX_C_I, + PIX_TOG, + PIX_ONE, + PIX_ZER, +}; + +struct phy_reg_offsets { + u32 GCR; /* Global Control Register */ + u32 CMCR1; /* Current Mode Control Register 1 */ + u32 CMCR2; /* Current Mode Control Register 2 */ + u32 SCR; /* Serial Control Register */ + u32 BCR1; /* Bias Control Register 1 */ + u32 BCR2; /* Bias Control Register 2 */ + u32 BCR3; /* Bias Control Register 3 */ + u32 MPLCR; /* Monitor PLL Lock Control Register */ + u32 DCR; /* Debug Control Register */ + u32 SSR1; /* Spare Status Register 1 */ + u32 CFGCR; /* Configuration Control Register */ + u32 PLLCR1; /* PLL_MODE 1 Control Register */ + u32 PLLCR2; /* PLL_MODE 2 Control Register */ + u32 PLLSR; /* PLL Status Register */ + u32 PLLSDCR1; /* PLL_SD_1 Control Register */ + u32 PLLSDCR2; /* PLL_SD_2 Control Register */ + u32 PLLTWGCR1;/* PLL_TWG_1 Control Register */ + u32 PLLTWGCR2;/* PLL_TWG_2 Control Register */ + u32 PLLCPCR; /* PLL_CP Control Register */ + u32 PLLTESTCR;/* PLL_TEST Control Register */ +}; + +struct lvds_phy_info { + u32 base; + struct phy_reg_offsets ofs; +}; + +static struct lvds_phy_info lvds_phy_16ff_primary = { + .base = 0x1000, + .ofs = { + .GCR = 0x0, + .CMCR1 = 0xC, + .CMCR2 = 0x10, + .SCR = 0x20, + .BCR1 = 0x2C, + .BCR2 = 0x30, + .BCR3 = 0x34, + .MPLCR = 0x64, + .DCR = 0x84, + .SSR1 = 0x88, + .CFGCR = 0xA0, + .PLLCR1 = 0xC0, + .PLLCR2 = 0xC4, + .PLLSR = 0xC8, + .PLLSDCR1 = 0xCC, + .PLLSDCR2 = 0xD0, + .PLLTWGCR1 = 0xD4, + .PLLTWGCR2 = 0xD8, + .PLLCPCR = 0xE0, + .PLLTESTCR = 0xE8, + } +}; + +static struct lvds_phy_info lvds_phy_16ff_secondary = { + .base = 0x1100, + .ofs = { + .GCR = 0x0, + .CMCR1 = 0xC, + .CMCR2 = 0x10, + .SCR = 0x20, + .BCR1 = 0x2C, + .BCR2 = 0x30, + .BCR3 = 0x34, + .MPLCR = 0x64, + .DCR = 0x84, + .SSR1 = 0x88, + .CFGCR = 0xA0, + .PLLCR1 = 0xC0, + .PLLCR2 = 0xC4, + .PLLSR = 0xC8, + .PLLSDCR1 = 0xCC, + .PLLSDCR2 = 0xD0, + .PLLTWGCR1 = 0xD4, + .PLLTWGCR2 = 0xD8, + .PLLCPCR = 0xE0, + .PLLTESTCR = 0xE8, + } +}; + +struct stm_lvds { + void __iomem *base; + struct device *dev; + struct clk *pclk; /* APB peripheral clock */ + struct clk *pllref_clk; /* Reference clock for the internal PLL */ + struct clk_hw lvds_ck_px; /* Pixel clock */ + u32 pixel_clock_rate; /* Pixel clock rate */ + + struct lvds_phy_info *primary; + struct lvds_phy_info *secondary; + + struct drm_bridge lvds_bridge; + struct drm_bridge *next_bridge; + struct drm_connector connector; + struct drm_encoder *encoder; + struct drm_panel *panel; + + u32 hw_version; + u32 link_type; +}; + +#define bridge_to_stm_lvds(b) \ + container_of(b, struct stm_lvds, lvds_bridge) + +#define connector_to_stm_lvds(c) \ + container_of(c, struct stm_lvds, connector) + +#define lvds_is_dual_link(lvds) \ + ({ \ + typeof(lvds) __lvds = (lvds); \ + __lvds == LVDS_DUAL_LINK_EVEN_ODD_PIXELS || \ + __lvds == LVDS_DUAL_LINK_ODD_EVEN_PIXELS; \ + }) + +static inline void lvds_write(struct stm_lvds *lvds, u32 reg, u32 val) +{ + writel(val, lvds->base + reg); +} + +static inline u32 lvds_read(struct stm_lvds *lvds, u32 reg) +{ + return readl(lvds->base + reg); +} + +static inline void lvds_set(struct stm_lvds *lvds, u32 reg, u32 mask) +{ + lvds_write(lvds, reg, lvds_read(lvds, reg) | mask); +} + +static inline void lvds_clear(struct stm_lvds *lvds, u32 reg, u32 mask) +{ + lvds_write(lvds, reg, lvds_read(lvds, reg) & ~mask); +} + +/* + * Expected JEIDA-RGB888 data to be sent in LSB format + * bit6 ............................bit0 + * CHAN0 {ONE, ONE, ZERO, ZERO, ZERO, ONE, ONE} + * CHAN1 {G2, R7, R6, R5, R4, R3, R2} + * CHAN2 {B3, B2, G7, G6, G5, G4, G3} + * CHAN3 {DE, VS, HS, B7, B6, B5, B4} + * CHAN4 {CE, B1, B0, G1, G0, R1, R0} + */ +enum lvds_pixel lvds_bitmap_jeida_rgb888[5][7] = { + { PIX_ONE, PIX_ONE, PIX_ZER, PIX_ZER, PIX_ZER, PIX_ONE, PIX_ONE }, + { PIX_G_2, PIX_R_7, PIX_R_6, PIX_R_5, PIX_R_4, PIX_R_3, PIX_R_2 }, + { PIX_B_3, PIX_B_2, PIX_G_7, PIX_G_6, PIX_G_5, PIX_G_4, PIX_G_3 }, + { PIX_D_E, PIX_V_S, PIX_H_S, PIX_B_7, PIX_B_6, PIX_B_5, PIX_B_4 }, + { PIX_C_E, PIX_B_1, PIX_B_0, PIX_G_1, PIX_G_0, PIX_R_1, PIX_R_0 } +}; + +/* + * Expected VESA-RGB888 data to be sent in LSB format + * bit6 ............................bit0 + * CHAN0 {ONE, ONE, ZERO, ZERO, ZERO, ONE, ONE} + * CHAN1 {G0, R5, R4, R3, R2, R1, R0} + * CHAN2 {B1, B0, G5, G4, G3, G2, G1} + * CHAN3 {DE, VS, HS, B5, B4, B3, B2} + * CHAN4 {CE, B7, B6, G7, G6, R7, R6} + */ +enum lvds_pixel lvds_bitmap_vesa_rgb888[5][7] = { + { PIX_ONE, PIX_ONE, PIX_ZER, PIX_ZER, PIX_ZER, PIX_ONE, PIX_ONE }, + { PIX_G_0, PIX_R_5, PIX_R_4, PIX_R_3, PIX_R_2, PIX_R_1, PIX_R_0 }, + { PIX_B_1, PIX_B_0, PIX_G_5, PIX_G_4, PIX_G_3, PIX_G_2, PIX_G_1 }, + { PIX_D_E, PIX_V_S, PIX_H_S, PIX_B_5, PIX_B_4, PIX_B_3, PIX_B_2 }, + { PIX_C_E, PIX_B_7, PIX_B_6, PIX_G_7, PIX_G_6, PIX_R_7, PIX_R_6 } +}; + +/* + * Clocks and PHY related functions + */ +static int lvds_pll_enable(struct stm_lvds *lvds, struct lvds_phy_info *phy) +{ + struct drm_device *drm = lvds->lvds_bridge.dev; + u32 lvds_gcr; + int val, ret; + + /* + * PLL lock timing control for the monitor unmask after startup (pll_en) + * Adjusted value so that the masking window is opened at start-up + */ + lvds_write(lvds, phy->base + phy->ofs.MPLCR, (0x200 - 0x160) << 16); + + /* Enable bias */ + lvds_write(lvds, phy->base + phy->ofs.BCR2, PHY_BCR2_BIAS_EN); + + /* Enable DP, LS, BIT clock output */ + lvds_gcr = PHY_GCR_DP_CLK_OUT | PHY_GCR_LS_CLK_OUT | PHY_GCR_BIT_CLK_OUT; + lvds_set(lvds, phy->base + phy->ofs.GCR, lvds_gcr); + + /* Power up all output dividers */ + lvds_set(lvds, phy->base + phy->ofs.PLLTESTCR, PHY_PLLTESTCR_EN); + lvds_set(lvds, phy->base + phy->ofs.PLLCR1, PHY_PLLCR1_DIV_EN); + + /* Set PHY in serial transmission mode */ + lvds_set(lvds, phy->base + phy->ofs.SCR, PHY_SCR_TX_EN); + + /* Enable the LVDS PLL & wait for its lock */ + lvds_set(lvds, phy->base + phy->ofs.PLLCR1, PHY_PLLCR1_PLL_EN); + ret = readl_poll_timeout_atomic(lvds->base + phy->base + phy->ofs.PLLSR, + val, val & PHY_PLLSR_PLL_LOCK, + SLEEP_US, TIMEOUT_US); + if (ret) + drm_err(drm, "!TIMEOUT! waiting PLL, let's continue\n"); + + /* WCLKCR_SECND_CLKPIX_SEL is for dual link */ + lvds_write(lvds, LVDS_WCLKCR, WCLKCR_SECND_CLKPIX_SEL); + + lvds_set(lvds, phy->ofs.PLLTESTCR, PHY_PLLTESTCR_CLK_EN); + + return ret; +} + +static int pll_get_clkout_khz(int clkin_khz, int bdiv, int mdiv, int ndiv) +{ + int divisor = ndiv * bdiv; + + /* Prevents from division by 0 */ + if (!divisor) + return 0; + + return clkin_khz * mdiv / divisor; +} + +#define TDIV 70 +#define NDIV_MIN 2 +#define NDIV_MAX 6 +#define BDIV_MIN 2 +#define BDIV_MAX 6 +#define MDIV_MIN 1 +#define MDIV_MAX 1023 + +static int lvds_pll_get_params(struct stm_lvds *lvds, + unsigned int clkin_khz, unsigned int clkout_khz, + unsigned int *bdiv, unsigned int *mdiv, unsigned int *ndiv) +{ + int delta, best_delta; /* all in khz */ + int i, o, n; + + /* Early checks preventing division by 0 & odd results */ + if (clkin_khz <= 0 || clkout_khz <= 0) + return -EINVAL; + + best_delta = 1000000; /* big started value (1000000khz) */ + + for (i = NDIV_MIN; i <= NDIV_MAX; i++) { + for (o = BDIV_MIN; o <= BDIV_MAX; o++) { + n = DIV_ROUND_CLOSEST(i * o * clkout_khz, clkin_khz); + /* Check ndiv according to vco range */ + if (n < MDIV_MIN || n > MDIV_MAX) + continue; + /* Check if new delta is better & saves parameters */ + delta = pll_get_clkout_khz(clkin_khz, i, n, o) - clkout_khz; + if (delta < 0) + delta = -delta; + if (delta < best_delta) { + *ndiv = i; + *mdiv = n; + *bdiv = o; + best_delta = delta; + } + /* fast return in case of "perfect result" */ + if (!delta) + return 0; + } + } + + return 0; +} + +static void lvds_pll_config(struct stm_lvds *lvds, struct lvds_phy_info *phy) +{ + unsigned int pll_in_khz, bdiv = 0, mdiv = 0, ndiv = 0; + struct clk_hw *hwclk; + int multiplier; + + /* + * The LVDS PHY includes a low power low jitter high performance and + * highly configuration Phase Locked Loop supporting integer and + * fractional multiplication ratios and Spread Spectrum Clocking. In + * integer mode, the only software supported feature for now, the PLL is + * made of a pre-divider NDIV, a feedback multiplier MDIV, followed by + * several post-dividers, each one with a specific application. + * + * ,------. ,-----. ,-----. + * Fref --> | NDIV | -Fpdf-> | PFD | --> | VCO | --------> Fvco + * `------' ,-> | | `-----' | + * | `-----' | + * | ,------. | + * `-------- | MDIV | <-----' + * `------' + * + * From the output of the VCO, the clock can be optionally extracted on + * the RCC clock observer, with a divider TDIV, for testing purpose, or + * is passed through a programmable post-divider BDIV. Finally, the + * frequency can be divided further with two fixed dividers. + * + * ,--------. + * ,-----> | DP div | ----------------> Fdp + * ,------. | `--------' + * Fvco --> | BDIV | ------------------------------------> Fbit + * | `------' ,------. | + * `-------------> | TDIV | --.---------------------> ClkObs + * '------' | ,--------. + * `--> | LS div | ------> Fls + * '--------' + * + * The LS and DP clock dividers operate at a fixed ratio of 7 and 3.5 + * respectively with regards to fbit. LS divider converts the bit clock + * to a pixel clock per lane per clock sample (Fls). This is useful + * when used to generate a dot clock for the display unit RGB output, + * and DP divider is. + */ + + hwclk = __clk_get_hw(lvds->pllref_clk); + if (!hwclk) + return; + + pll_in_khz = clk_hw_get_rate(hwclk) / 1000; + + if (lvds_is_dual_link(lvds->link_type)) + multiplier = 2; + else + multiplier = 1; + + lvds_pll_get_params(lvds, pll_in_khz, + lvds->pixel_clock_rate * 7 / 1000 / multiplier, + &bdiv, &mdiv, &ndiv); + + /* Set BDIV, MDIV and NDIV */ + lvds_write(lvds, phy->base + phy->ofs.PLLCR2, ndiv << 16); + lvds_set(lvds, phy->base + phy->ofs.PLLCR2, bdiv); + lvds_write(lvds, phy->base + phy->ofs.PLLSDCR1, mdiv); + + /* Hardcode TDIV as dynamic values are not yet implemented */ + lvds_write(lvds, phy->base + phy->ofs.PLLTESTCR, TDIV << 16); + + /* + * For now, PLL just needs to be in integer mode + * Fractional and spread spectrum clocking are not yet implemented + * + * PLL integer mode: + * - PMRY_PLL_TWG_STEP = PMRY_PLL_SD_INT_RATIO + * - EN_TWG = 0 + * - EN_SD = 0 + * - DOWN_SPREAD = 0 + * + * PLL fractional mode: + * - EN_TWG = 0 + * - EN_SD = 1 + * - DOWN_SPREAD = 0 + * + * Spread Spectrum Clocking + * - EN_TWG = 1 + * - EN_SD = 1 + */ + + /* Disable TWG and SD */ + lvds_clear(lvds, phy->base + phy->ofs.PLLCR1, PHY_PLLCR1_EN_TWG | PHY_PLLCR1_EN_SD); + + /* Power up bias and PLL dividers */ + lvds_set(lvds, phy->base + phy->ofs.DCR, PHY_DCR_POWER_OK); + lvds_set(lvds, phy->base + phy->ofs.CMCR1, PHY_CMCR_CM_EN_DL); + lvds_set(lvds, phy->base + phy->ofs.CMCR2, PHY_CMCR_CM_EN_DL4); + + /* Set up voltage mode */ + lvds_set(lvds, phy->base + phy->ofs.PLLCPCR, 0x1); + lvds_set(lvds, phy->base + phy->ofs.BCR3, PHY_BCR3_VM_EN_DL); + lvds_set(lvds, phy->base + phy->ofs.BCR1, PHY_BCR1_EN_BIAS_DL); + /* Enable digital datalanes */ + lvds_set(lvds, phy->base + phy->ofs.CFGCR, PHY_CFGCR_EN_DIG_DL); +} + +static int lvds_pixel_clk_enable(struct clk_hw *hw) +{ + struct stm_lvds *lvds = container_of(hw, struct stm_lvds, lvds_ck_px); + struct drm_device *drm = lvds->lvds_bridge.dev; + struct lvds_phy_info *phy; + int ret; + + ret = clk_prepare_enable(lvds->pclk); + if (ret) { + drm_err(drm, "Failed to enable lvds peripheral clk\n"); + return ret; + } + + ret = clk_prepare_enable(lvds->pllref_clk); + if (ret) { + drm_err(drm, "Failed to enable lvds reference clk\n"); + clk_disable_unprepare(lvds->pclk); + return ret; + } + + /* In case we are operating in dual link the second PHY is set before the primary PHY. */ + if (lvds->secondary) { + phy = lvds->secondary; + + /* Release LVDS PHY from reset mode */ + lvds_set(lvds, phy->base + phy->ofs.GCR, PHY_GCR_DIV_RSTN | PHY_GCR_RSTZ); + lvds_pll_config(lvds, phy); + + ret = lvds_pll_enable(lvds, phy); + if (ret) { + drm_err(drm, "Failed to enable secondary PHY PLL: %d\n", ret); + return ret; + } + } + + if (lvds->primary) { + phy = lvds->primary; + + /* Release LVDS PHY from reset mode */ + lvds_set(lvds, phy->base + phy->ofs.GCR, PHY_GCR_DIV_RSTN | PHY_GCR_RSTZ); + lvds_pll_config(lvds, phy); + + ret = lvds_pll_enable(lvds, phy); + if (ret) { + drm_err(drm, "Failed to enable primary PHY PLL: %d\n", ret); + return ret; + } + } + + return 0; +} + +static void lvds_pixel_clk_disable(struct clk_hw *hw) +{ + struct stm_lvds *lvds = container_of(hw, struct stm_lvds, lvds_ck_px); + + /* + * For each PHY: + * Disable DP, LS, BIT clock outputs + * Shutdown the PLL + * Assert LVDS PHY in reset mode + */ + + if (lvds->primary) { + lvds_clear(lvds, lvds->primary->base + lvds->primary->ofs.GCR, + (PHY_GCR_DP_CLK_OUT | PHY_GCR_LS_CLK_OUT | PHY_GCR_BIT_CLK_OUT)); + lvds_clear(lvds, lvds->primary->base + lvds->primary->ofs.PLLCR1, + PHY_PLLCR1_PLL_EN); + lvds_clear(lvds, lvds->primary->base + lvds->primary->ofs.GCR, + PHY_GCR_DIV_RSTN | PHY_GCR_RSTZ); + } + + if (lvds->secondary) { + lvds_clear(lvds, lvds->secondary->base + lvds->secondary->ofs.GCR, + (PHY_GCR_DP_CLK_OUT | PHY_GCR_LS_CLK_OUT | PHY_GCR_BIT_CLK_OUT)); + lvds_clear(lvds, lvds->secondary->base + lvds->secondary->ofs.PLLCR1, + PHY_PLLCR1_PLL_EN); + lvds_clear(lvds, lvds->secondary->base + lvds->secondary->ofs.GCR, + PHY_GCR_DIV_RSTN | PHY_GCR_RSTZ); + } + + clk_disable_unprepare(lvds->pllref_clk); + clk_disable_unprepare(lvds->pclk); +} + +static unsigned long lvds_pixel_clk_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct stm_lvds *lvds = container_of(hw, struct stm_lvds, lvds_ck_px); + struct drm_device *drm = lvds->lvds_bridge.dev; + unsigned int pll_in_khz, bdiv, mdiv, ndiv; + int ret, multiplier, pll_out_khz; + u32 val; + + ret = clk_prepare_enable(lvds->pclk); + if (ret) { + drm_err(drm, "Failed to enable lvds peripheral clk\n"); + return 0; + } + + if (lvds_is_dual_link(lvds->link_type)) + multiplier = 2; + else + multiplier = 1; + + val = lvds_read(lvds, lvds->primary->base + lvds->primary->ofs.PLLCR2); + + ndiv = (val & PHY_PLLCR2_NDIV) >> 16; + bdiv = (val & PHY_PLLCR2_BDIV) >> 0; + + mdiv = (unsigned int)lvds_read(lvds, + lvds->primary->base + lvds->primary->ofs.PLLSDCR1); + + pll_in_khz = (unsigned int)(parent_rate / 1000); + + /* Compute values if not yet accessible */ + if (val == 0 || mdiv == 0) { + lvds_pll_get_params(lvds, pll_in_khz, + lvds->pixel_clock_rate * 7 / 1000 / multiplier, + &bdiv, &mdiv, &ndiv); + } + + pll_out_khz = pll_get_clkout_khz(pll_in_khz, bdiv, mdiv, ndiv); + drm_dbg(drm, "ndiv %d , bdiv %d, mdiv %d, pll_out_khz %d\n", + ndiv, bdiv, mdiv, pll_out_khz); + + /* + * 1/7 because for each pixel in 1 lane there is 7 bits + * We want pixclk, not bitclk + */ + lvds->pixel_clock_rate = pll_out_khz * 1000 * multiplier / 7; + + clk_disable_unprepare(lvds->pclk); + + return (unsigned long)lvds->pixel_clock_rate; +} + +static long lvds_pixel_clk_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *parent_rate) +{ + struct stm_lvds *lvds = container_of(hw, struct stm_lvds, lvds_ck_px); + unsigned int pll_in_khz, bdiv = 0, mdiv = 0, ndiv = 0; + const struct drm_connector *connector; + const struct drm_display_mode *mode; + int multiplier; + + connector = &lvds->connector; + if (!connector) + return -EINVAL; + + if (list_empty(&connector->modes)) { + drm_dbg(connector->dev, "connector: empty modes list\n"); + return -EINVAL; + } + + mode = list_first_entry(&connector->modes, + struct drm_display_mode, head); + + pll_in_khz = (unsigned int)(*parent_rate / 1000); + + if (lvds_is_dual_link(lvds->link_type)) + multiplier = 2; + else + multiplier = 1; + + lvds_pll_get_params(lvds, pll_in_khz, mode->clock * 7 / multiplier, &bdiv, &mdiv, &ndiv); + + /* + * 1/7 because for each pixel in 1 lane there is 7 bits + * We want pixclk, not bitclk + */ + lvds->pixel_clock_rate = (unsigned long)pll_get_clkout_khz(pll_in_khz, bdiv, mdiv, ndiv) + * 1000 * multiplier / 7; + + return lvds->pixel_clock_rate; +} + +static const struct clk_ops lvds_pixel_clk_ops = { + .enable = lvds_pixel_clk_enable, + .disable = lvds_pixel_clk_disable, + .recalc_rate = lvds_pixel_clk_recalc_rate, + .round_rate = lvds_pixel_clk_round_rate, +}; + +static const struct clk_init_data clk_data = { + .name = "clk_pix_lvds", + .ops = &lvds_pixel_clk_ops, + .parent_names = (const char * []) {"ck_ker_lvdsphy"}, + .num_parents = 1, + .flags = CLK_IGNORE_UNUSED, +}; + +static void lvds_pixel_clk_unregister(void *data) +{ + struct stm_lvds *lvds = data; + + of_clk_del_provider(lvds->dev->of_node); + clk_hw_unregister(&lvds->lvds_ck_px); +} + +static int lvds_pixel_clk_register(struct stm_lvds *lvds) +{ + struct device_node *node = lvds->dev->of_node; + int ret; + + lvds->lvds_ck_px.init = &clk_data; + + /* set the rate by default at 148500000 */ + lvds->pixel_clock_rate = 148500000; + + ret = clk_hw_register(lvds->dev, &lvds->lvds_ck_px); + if (ret) + return ret; + + ret = of_clk_add_hw_provider(node, of_clk_hw_simple_get, + &lvds->lvds_ck_px); + if (ret) + clk_hw_unregister(&lvds->lvds_ck_px); + + return ret; +} + +/* + * Host configuration related + */ +static void lvds_config_data_mapping(struct stm_lvds *lvds) +{ + struct drm_device *drm = lvds->lvds_bridge.dev; + const struct drm_display_info *info; + enum lvds_pixel (*bitmap)[7]; + u32 lvds_dmlcr, lvds_dmmcr; + int i; + + info = &(&lvds->connector)->display_info; + if (!info->num_bus_formats || !info->bus_formats) { + drm_warn(drm, "No LVDS bus format reported\n"); + return; + } + + switch (info->bus_formats[0]) { + case MEDIA_BUS_FMT_RGB666_1X7X3_SPWG: /* VESA-RGB666 */ + drm_warn(drm, "Pixel format with data mapping not yet supported.\n"); + return; + case MEDIA_BUS_FMT_RGB888_1X7X4_SPWG: /* VESA-RGB888 */ + bitmap = lvds_bitmap_vesa_rgb888; + break; + case MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA: /* JEIDA-RGB888 */ + bitmap = lvds_bitmap_jeida_rgb888; + break; + default: + drm_warn(drm, "Unsupported LVDS bus format 0x%04x\n", info->bus_formats[0]); + return; + } + + /* Set bitmap for each lane */ + for (i = 0; i < 5; i++) { + lvds_dmlcr = ((bitmap[i][0]) + + (bitmap[i][1] << 5) + + (bitmap[i][2] << 10) + + (bitmap[i][3] << 15)); + lvds_dmmcr = ((bitmap[i][4]) + + (bitmap[i][5] << 5) + + (bitmap[i][6] << 10)); + + lvds_write(lvds, LVDS_DMLCR(i), lvds_dmlcr); + lvds_write(lvds, LVDS_DMMCR(i), lvds_dmmcr); + } +} + +static void lvds_config_mode(struct stm_lvds *lvds) +{ + u32 bus_flags, lvds_cr = 0, lvds_cdl1cr = 0, lvds_cdl2cr = 0; + const struct drm_display_mode *mode; + const struct drm_connector *connector; + + connector = &lvds->connector; + if (!connector) + return; + + if (list_empty(&connector->modes)) { + drm_dbg(connector->dev, "connector: empty modes list\n"); + return; + } + + bus_flags = connector->display_info.bus_flags; + mode = list_first_entry(&connector->modes, + struct drm_display_mode, head); + + lvds_clear(lvds, LVDS_CR, CR_LKMOD); + lvds_clear(lvds, LVDS_CDL1CR, CDLCR_DISTR0 | CDLCR_DISTR1 | CDLCR_DISTR2 | + CDLCR_DISTR3 | CDLCR_DISTR4); + lvds_clear(lvds, LVDS_CDL2CR, CDLCR_DISTR0 | CDLCR_DISTR1 | CDLCR_DISTR2 | + CDLCR_DISTR3 | CDLCR_DISTR4); + + /* Set channel distribution */ + if (lvds->primary) + lvds_cdl1cr = CDL1CR_DEFAULT; + + if (lvds->secondary) { + lvds_cr |= CR_LKMOD; + lvds_cdl2cr = CDL2CR_DEFAULT; + } + + /* Set signal polarity */ + if (bus_flags & DRM_BUS_FLAG_DE_LOW) + lvds_cr |= CR_DEPOL; + + if (mode->flags & DRM_MODE_FLAG_NHSYNC) + lvds_cr |= CR_HSPOL; + + if (mode->flags & DRM_MODE_FLAG_NVSYNC) + lvds_cr |= CR_VSPOL; + + switch (lvds->link_type) { + case LVDS_DUAL_LINK_EVEN_ODD_PIXELS: /* LKPHA = 0 */ + lvds_cr &= ~CR_LKPHA; + break; + case LVDS_DUAL_LINK_ODD_EVEN_PIXELS: /* LKPHA = 1 */ + lvds_cr |= CR_LKPHA; + break; + default: + drm_notice(lvds->lvds_bridge.dev, "No phase precised, setting default\n"); + lvds_cr &= ~CR_LKPHA; + break; + } + + /* Write config to registers */ + lvds_set(lvds, LVDS_CR, lvds_cr); + lvds_write(lvds, LVDS_CDL1CR, lvds_cdl1cr); + lvds_write(lvds, LVDS_CDL2CR, lvds_cdl2cr); +} + +static int lvds_connector_get_modes(struct drm_connector *connector) +{ + struct stm_lvds *lvds = connector_to_stm_lvds(connector); + + return drm_panel_get_modes(lvds->panel, connector); +} + +static int lvds_connector_atomic_check(struct drm_connector *connector, + struct drm_atomic_state *state) +{ + const struct drm_display_mode *panel_mode; + struct drm_connector_state *conn_state; + struct drm_crtc_state *crtc_state; + + conn_state = drm_atomic_get_new_connector_state(state, connector); + if (!conn_state) + return -EINVAL; + + if (list_empty(&connector->modes)) { + drm_dbg(connector->dev, "connector: empty modes list\n"); + return -EINVAL; + } + + if (!conn_state->crtc) + return -EINVAL; + + panel_mode = list_first_entry(&connector->modes, + struct drm_display_mode, head); + + /* We're not allowed to modify the resolution. */ + crtc_state = drm_atomic_get_crtc_state(state, conn_state->crtc); + if (IS_ERR(crtc_state)) + return PTR_ERR(crtc_state); + + if (crtc_state->mode.hdisplay != panel_mode->hdisplay || + crtc_state->mode.vdisplay != panel_mode->vdisplay) + return -EINVAL; + + /* The flat panel mode is fixed, just copy it to the adjusted mode. */ + drm_mode_copy(&crtc_state->adjusted_mode, panel_mode); + + return 0; +} + +static const struct drm_connector_helper_funcs lvds_conn_helper_funcs = { + .get_modes = lvds_connector_get_modes, + .atomic_check = lvds_connector_atomic_check, +}; + +static const struct drm_connector_funcs lvds_conn_funcs = { + .reset = drm_atomic_helper_connector_reset, + .fill_modes = drm_helper_probe_single_connector_modes, + .destroy = drm_connector_cleanup, + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, +}; + +static int lvds_attach(struct drm_bridge *bridge, + enum drm_bridge_attach_flags flags) +{ + struct stm_lvds *lvds = bridge_to_stm_lvds(bridge); + struct drm_connector *connector = &lvds->connector; + struct drm_encoder *encoder = bridge->encoder; + int ret; + + if (!bridge->encoder) { + drm_err(bridge->dev, "Parent encoder object not found\n"); + return -ENODEV; + } + + /* Set the encoder type as caller does not know it */ + bridge->encoder->encoder_type = DRM_MODE_ENCODER_LVDS; + + /* No cloning support */ + bridge->encoder->possible_clones = 0; + + /* If we have a next bridge just attach it. */ + if (lvds->next_bridge) + return drm_bridge_attach(bridge->encoder, lvds->next_bridge, + bridge, flags); + + if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR) { + drm_err(bridge->dev, "Fix bridge driver to make connector optional!"); + return -EINVAL; + } + + /* Otherwise if we have a panel, create a connector. */ + if (!lvds->panel) + return 0; + + ret = drm_connector_init(bridge->dev, connector, + &lvds_conn_funcs, DRM_MODE_CONNECTOR_LVDS); + if (ret < 0) + return ret; + + drm_connector_helper_add(connector, &lvds_conn_helper_funcs); + + ret = drm_connector_attach_encoder(connector, encoder); + + return ret; +} + +static void lvds_atomic_enable(struct drm_bridge *bridge, + struct drm_bridge_state *old_bridge_state) +{ + struct drm_atomic_state *state = old_bridge_state->base.state; + struct stm_lvds *lvds = bridge_to_stm_lvds(bridge); + struct drm_connector_state *conn_state; + struct drm_connector *connector; + int ret; + + ret = clk_prepare_enable(lvds->pclk); + if (ret) { + drm_err(bridge->dev, "Failed to enable lvds peripheral clk\n"); + return; + } + + connector = drm_atomic_get_new_connector_for_encoder(state, bridge->encoder); + if (!connector) + return; + + conn_state = drm_atomic_get_new_connector_state(state, connector); + if (!conn_state) + return; + + lvds_config_mode(lvds); + + /* Set Data Mapping */ + lvds_config_data_mapping(lvds); + + /* Turn the output on. */ + lvds_set(lvds, LVDS_CR, CR_LVDSEN); + + if (lvds->panel) { + drm_panel_prepare(lvds->panel); + drm_panel_enable(lvds->panel); + } +} + +static void lvds_atomic_disable(struct drm_bridge *bridge, + struct drm_bridge_state *old_bridge_state) +{ + struct stm_lvds *lvds = bridge_to_stm_lvds(bridge); + + if (lvds->panel) { + drm_panel_disable(lvds->panel); + drm_panel_unprepare(lvds->panel); + } + + /* Disable LVDS module */ + lvds_clear(lvds, LVDS_CR, CR_LVDSEN); + + clk_disable_unprepare(lvds->pclk); +} + +static const struct drm_bridge_funcs lvds_bridge_funcs = { + .attach = lvds_attach, + .atomic_enable = lvds_atomic_enable, + .atomic_disable = lvds_atomic_disable, + .atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state, + .atomic_destroy_state = drm_atomic_helper_bridge_destroy_state, + .atomic_reset = drm_atomic_helper_bridge_reset, +}; + +static int lvds_probe(struct platform_device *pdev) +{ + struct device_node *port1, *port2, *remote; + struct device *dev = &pdev->dev; + struct reset_control *rstc; + struct stm_lvds *lvds; + int ret, dual_link; + + dev_dbg(dev, "Probing LVDS driver...\n"); + + lvds = devm_kzalloc(dev, sizeof(*lvds), GFP_KERNEL); + if (!lvds) + return -ENOMEM; + + lvds->dev = dev; + + ret = drm_of_find_panel_or_bridge(dev->of_node, 1, 0, + &lvds->panel, &lvds->next_bridge); + if (ret) { + dev_err_probe(dev, ret, "Panel not found\n"); + return ret; + } + + lvds->base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(lvds->base)) { + ret = PTR_ERR(lvds->base); + dev_err(dev, "Unable to get regs %d\n", ret); + return ret; + } + + lvds->pclk = devm_clk_get(dev, "pclk"); + if (IS_ERR(lvds->pclk)) { + ret = PTR_ERR(lvds->pclk); + dev_err(dev, "Unable to get peripheral clock: %d\n", ret); + return ret; + } + + ret = clk_prepare_enable(lvds->pclk); + if (ret) { + dev_err(dev, "%s: Failed to enable peripheral clk\n", __func__); + return ret; + } + + rstc = devm_reset_control_get_exclusive(dev, NULL); + + if (IS_ERR(rstc)) { + ret = PTR_ERR(rstc); + goto err_lvds_probe; + } + + reset_control_assert(rstc); + usleep_range(10, 20); + reset_control_deassert(rstc); + + port1 = of_graph_get_port_by_id(dev->of_node, 1); + port2 = of_graph_get_port_by_id(dev->of_node, 2); + dual_link = drm_of_lvds_get_dual_link_pixel_order(port1, port2); + + switch (dual_link) { + case DRM_LVDS_DUAL_LINK_ODD_EVEN_PIXELS: + lvds->link_type = LVDS_DUAL_LINK_ODD_EVEN_PIXELS; + lvds->primary = &lvds_phy_16ff_primary; + lvds->secondary = &lvds_phy_16ff_secondary; + break; + case DRM_LVDS_DUAL_LINK_EVEN_ODD_PIXELS: + lvds->link_type = LVDS_DUAL_LINK_EVEN_ODD_PIXELS; + lvds->primary = &lvds_phy_16ff_primary; + lvds->secondary = &lvds_phy_16ff_secondary; + break; + case -EINVAL: + /* + * drm_of_lvds_get_dual_pixel_order returns 4 possible values. + * In the case where the returned value is an error, it can be + * either ENODEV or EINVAL. Seeing the structure of this + * function, EINVAL means that either port1 or port2 is not + * present in the device tree. + * In that case, the lvds panel can be a single link panel, or + * there is a semantical error in the device tree code. + */ + remote = of_get_next_available_child(port1, NULL); + if (remote) { + if (of_graph_get_remote_endpoint(remote)) { + lvds->link_type = LVDS_SINGLE_LINK_PRIMARY; + lvds->primary = &lvds_phy_16ff_primary; + lvds->secondary = NULL; + } else { + ret = -EINVAL; + } + + of_node_put(remote); + } + + remote = of_get_next_available_child(port2, NULL); + if (remote) { + if (of_graph_get_remote_endpoint(remote)) { + lvds->link_type = LVDS_SINGLE_LINK_SECONDARY; + lvds->primary = NULL; + lvds->secondary = &lvds_phy_16ff_secondary; + } else { + ret = (ret == -EINVAL) ? -EINVAL : 0; + } + + of_node_put(remote); + } + break; + default: + ret = -EINVAL; + goto err_lvds_probe; + } + of_node_put(port1); + of_node_put(port2); + + lvds->pllref_clk = devm_clk_get(dev, "ref"); + if (IS_ERR(lvds->pllref_clk)) { + ret = PTR_ERR(lvds->pllref_clk); + dev_err(dev, "Unable to get reference clock: %d\n", ret); + goto err_lvds_probe; + } + + ret = lvds_pixel_clk_register(lvds); + if (ret) { + dev_err(dev, "Failed to register LVDS pixel clock: %d\n", ret); + goto err_lvds_probe; + } + + lvds->lvds_bridge.funcs = &lvds_bridge_funcs; + lvds->lvds_bridge.of_node = dev->of_node; + lvds->hw_version = lvds_read(lvds, LVDS_VERR); + + dev_info(dev, "version 0x%02x initialized\n", lvds->hw_version); + + drm_bridge_add(&lvds->lvds_bridge); + + platform_set_drvdata(pdev, lvds); + + clk_disable_unprepare(lvds->pclk); + + return 0; + +err_lvds_probe: + clk_disable_unprepare(lvds->pclk); + + return ret; +} + +static int lvds_remove(struct platform_device *pdev) +{ + struct stm_lvds *lvds = platform_get_drvdata(pdev); + + lvds_pixel_clk_unregister(lvds); + + drm_bridge_remove(&lvds->lvds_bridge); + + return 0; +} + +static const struct of_device_id lvds_dt_ids[] = { + { + .compatible = "st,stm32-lvds", + .data = NULL + }, + { /* sentinel */ } +}; + +MODULE_DEVICE_TABLE(of, lvds_dt_ids); + +static struct platform_driver lvds_platform_driver = { + .probe = lvds_probe, + .remove = lvds_remove, + .driver = { + .name = "stm32-display-lvds", + .owner = THIS_MODULE, + .of_match_table = lvds_dt_ids, + }, +}; + +module_platform_driver(lvds_platform_driver); + +MODULE_AUTHOR("Raphaël Gallais-Pou "); +MODULE_AUTHOR("Philippe Cornu "); +MODULE_AUTHOR("Yannick Fertre "); +MODULE_DESCRIPTION("STMicroelectronics LVDS Display Interface Transmitter DRM driver"); +MODULE_LICENSE("GPL");