diff mbox series

[3/5] ARM: dts: stm32: enable display support on stm32mp135f-dk board

Message ID 20240205-ltdc_mp13-v1-3-072d24bf1b36@foss.st.com (mailing list archive)
State New, archived
Headers show
Series Add display support for stm32mp135f-dk board | expand

Commit Message

Raphael Gallais-Pou Feb. 5, 2024, 9:06 a.m. UTC 
Link panel and display controller.
Enable panel, backlight and display controller.

Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
---
 arch/arm/boot/dts/st/stm32mp135f-dk.dts | 55 +++++++++++++++++++++++++++++++++
 1 file changed, 55 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/st/stm32mp135f-dk.dts b/arch/arm/boot/dts/st/stm32mp135f-dk.dts
index eea740d097c7..4a52d314c46d 100644
--- a/arch/arm/boot/dts/st/stm32mp135f-dk.dts
+++ b/arch/arm/boot/dts/st/stm32mp135f-dk.dts
@@ -66,6 +66,48 @@  led-blue {
 			default-state = "off";
 		};
 	};
+
+	panel_backlight: panel-backlight {
+		compatible = "gpio-backlight";
+		gpios = <&gpioe 12 GPIO_ACTIVE_HIGH>;
+		default-on;
+		default-brightness-level = <0>;
+		status = "okay";
+	};
+
+	panel_rgb: panel-rgb {
+		compatible = "rocktech,rk043fn48h", "panel-dpi";
+		enable-gpios = <&gpioi 7 GPIO_ACTIVE_HIGH>;
+		backlight = <&panel_backlight>;
+		power-supply = <&scmi_v3v3_sw>;
+		data-mapping = "bgr666";
+		status = "okay";
+
+		width-mm = <105>;
+		height-mm = <67>;
+
+		panel-timing {
+			clock-frequency = <10000000>;
+			hactive = <480>;
+			hback-porch = <43>;
+			hfront-porch = <10>;
+			hsync-len = <1>;
+			hsync-active = <0>;
+			vactive = <272>;
+			vback-porch = <26>;
+			vfront-porch = <4>;
+			vsync-len = <10>;
+			vsync-active = <0>;
+			de-active = <1>;
+			pixelclk-active = <1>;
+		};
+
+		port {
+			panel_in_rgb: endpoint {
+				remote-endpoint = <&ltdc_out_rgb>;
+			};
+		};
+	};
 };
 
 &adc_1 {
@@ -160,6 +202,19 @@  &iwdg2 {
 	status = "okay";
 };
 
+&ltdc {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&ltdc_pins_a>;
+	pinctrl-1 = <&ltdc_sleep_pins_a>;
+	status = "okay";
+
+	port {
+		ltdc_out_rgb: endpoint {
+			remote-endpoint = <&panel_in_rgb>;
+		};
+	};
+};
+
 &rtc {
 	status = "okay";
 };