@@ -312,7 +312,7 @@ static struct clk_mgr_funcs rv1_clk_funcs = {
};
static struct clk_mgr_internal_funcs rv1_clk_internal_funcs = {
- .set_dispclk = rv1_vbios_smu_set_dispclk,
+ .set_dispclk = rv1_clk_mgr_vbios_smu_set_dispclk,
.set_dprefclk = dce112_set_dprefclk
};
@@ -83,7 +83,7 @@ static const struct IP_BASE MP1_BASE = { { { { 0x00016000, 0, 0, 0, 0 } },
* the register is NOT EQUAL to zero, and because the translation in msg_if.h
* won't work with REG_WAIT.
*/
-static uint32_t rv1_smu_wait_for_response(struct clk_mgr_internal *clk_mgr, unsigned int delay_us, unsigned int max_retries)
+static uint32_t rv1_clk_mgr_vbios_smu_wait_for_response(struct clk_mgr_internal *clk_mgr, unsigned int delay_us, unsigned int max_retries)
{
uint32_t res_val = VBIOSSMC_Status_BUSY;
@@ -101,7 +101,7 @@ static uint32_t rv1_smu_wait_for_response(struct clk_mgr_internal *clk_mgr, unsi
return res_val;
}
-static int rv1_vbios_smu_send_msg_with_param(struct clk_mgr_internal *clk_mgr,
+static int rv1_clk_mgr_vbios_smu_send_msg_with_param(struct clk_mgr_internal *clk_mgr,
unsigned int msg_id, unsigned int param)
{
uint32_t result;
@@ -115,7 +115,7 @@ static int rv1_vbios_smu_send_msg_with_param(struct clk_mgr_internal *clk_mgr,
/* Trigger the message transaction by writing the message ID */
REG_WRITE(MP1_SMN_C2PMSG_67, msg_id);
- result = rv1_smu_wait_for_response(clk_mgr, 10, 1000);
+ result = rv1_clk_mgr_vbios_smu_wait_for_response(clk_mgr, 10, 1000);
ASSERT(result == VBIOSSMC_Result_OK);
@@ -123,14 +123,14 @@ static int rv1_vbios_smu_send_msg_with_param(struct clk_mgr_internal *clk_mgr,
return REG_READ(MP1_SMN_C2PMSG_83);
}
-int rv1_vbios_smu_set_dispclk(struct clk_mgr_internal *clk_mgr, int requested_dispclk_khz)
+int rv1_clk_mgr_vbios_smu_set_dispclk(struct clk_mgr_internal *clk_mgr, int requested_dispclk_khz)
{
int actual_dispclk_set_mhz = -1;
struct dc *dc = clk_mgr->base.ctx->dc;
struct dmcu *dmcu = dc->res_pool->dmcu;
/* Unit of SMU msg parameter is Mhz */
- actual_dispclk_set_mhz = rv1_vbios_smu_send_msg_with_param(
+ actual_dispclk_set_mhz = rv1_clk_mgr_vbios_smu_send_msg_with_param(
clk_mgr,
VBIOSSMC_MSG_SetDispclkFreq,
khz_to_mhz_ceil(requested_dispclk_khz));
@@ -144,11 +144,11 @@ int rv1_vbios_smu_set_dispclk(struct clk_mgr_internal *clk_mgr, int requested_di
return actual_dispclk_set_mhz * 1000;
}
-int rv1_vbios_smu_set_dprefclk(struct clk_mgr_internal *clk_mgr)
+int rv1_clk_mgr_vbios_smu_set_dprefclk(struct clk_mgr_internal *clk_mgr)
{
int actual_dprefclk_set_mhz = -1;
- actual_dprefclk_set_mhz = rv1_vbios_smu_send_msg_with_param(
+ actual_dprefclk_set_mhz = rv1_clk_mgr_vbios_smu_send_msg_with_param(
clk_mgr,
VBIOSSMC_MSG_SetDprefclkFreq,
khz_to_mhz_ceil(clk_mgr->base.dprefclk_khz));
@@ -26,7 +26,7 @@
#ifndef DAL_DC_DCN10_RV1_CLK_MGR_VBIOS_SMU_H_
#define DAL_DC_DCN10_RV1_CLK_MGR_VBIOS_SMU_H_
-int rv1_vbios_smu_set_dispclk(struct clk_mgr_internal *clk_mgr, int requested_dispclk_khz);
-int rv1_vbios_smu_set_dprefclk(struct clk_mgr_internal *clk_mgr);
+int rv1_clk_mgr_vbios_smu_set_dispclk(struct clk_mgr_internal *clk_mgr, int requested_dispclk_khz);
+int rv1_clk_mgr_vbios_smu_set_dprefclk(struct clk_mgr_internal *clk_mgr);
#endif /* DAL_DC_DCN10_RV1_CLK_MGR_VBIOS_SMU_H_ */
The functions defined in dc/clk_mgr/dcn10/rv1_clk_mgr_vbios_smu.c don't have names that indicate where they were declared. To better filter results in debug tools like ftrace, prefix these functions with 'rv1_clk_mgr_vbios_smu_'. Signed-off-by: David Tadokoro <davidbtadokoro@usp.br> --- .../drm/amd/display/dc/clk_mgr/dcn10/rv1_clk_mgr.c | 2 +- .../dc/clk_mgr/dcn10/rv1_clk_mgr_vbios_smu.c | 14 +++++++------- .../dc/clk_mgr/dcn10/rv1_clk_mgr_vbios_smu.h | 4 ++-- 3 files changed, 10 insertions(+), 10 deletions(-)