| Message ID | 20240221-x1e80100-display-refactor-connector-v1-3-86c0e1ebd5ec@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | drm/msm/dp: Rework the eDP/DP modes and add support for X1E80100 | expand |
On Wed, 21 Feb 2024 at 00:50, Abel Vesa <abel.vesa@linaro.org> wrote: > > Add the X1E80100 DP descs and compatible. This platform will be using > a single compatible for both eDP and DP mode. The actual mode will > be set in devicetree via is-edp flag. > > Signed-off-by: Abel Vesa <abel.vesa@linaro.org> > --- > drivers/gpu/drm/msm/dp/dp_display.c | 9 +++++++++ > 1 file changed, 9 insertions(+) Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
On Wed, Feb 21, 2024 at 12:50:33AM +0200, Abel Vesa wrote: > Add the X1E80100 DP descs and compatible. This platform will be using > a single compatible for both eDP and DP mode. The actual mode will > be set in devicetree via is-edp flag. > > Signed-off-by: Abel Vesa <abel.vesa@linaro.org> > --- > drivers/gpu/drm/msm/dp/dp_display.c | 9 +++++++++ > 1 file changed, 9 insertions(+) > > diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c > index 9e58285d4ec6..7b8c695d521a 100644 > --- a/drivers/gpu/drm/msm/dp/dp_display.c > +++ b/drivers/gpu/drm/msm/dp/dp_display.c > @@ -171,6 +171,14 @@ static const struct msm_dp_desc sm8650_dp_descs[] = { > {} > }; > > +static const struct msm_dp_desc x1e80100_dp_descs[] = { > + { .io_start = 0x0ae90000, .id = MSM_DP_CONTROLLER_0, .wide_bus_en = true }, > + { .io_start = 0x0ae98000, .id = MSM_DP_CONTROLLER_1, .wide_bus_en = true }, > + { .io_start = 0x0ae9a000, .id = MSM_DP_CONTROLLER_2, .wide_bus_en = true }, > + { .io_start = 0x0aea0000, .id = MSM_DP_CONTROLLER_3, .wide_bus_en = true }, > + {} > +}; > + > static const struct of_device_id dp_dt_match[] = { > { .compatible = "qcom,sc7180-dp", .data = &sc7180_dp_descs }, > { .compatible = "qcom,sc7280-dp", .data = &sc7280_dp_descs }, > @@ -179,6 +187,7 @@ static const struct of_device_id dp_dt_match[] = { > { .compatible = "qcom,sc8180x-edp", .data = &sc8180x_dp_descs }, > { .compatible = "qcom,sc8280xp-dp", .data = &sc8280xp_dp_descs }, > { .compatible = "qcom,sc8280xp-edp", .data = &sc8280xp_edp_descs }, > + { .compatible = "qcom,x1e80100-dp", .data = &x1e80100_dp_descs }, This doesn't look like alphabetical order. Regards, Bjorn > { .compatible = "qcom,sdm845-dp", .data = &sc7180_dp_descs }, > { .compatible = "qcom,sm8350-dp", .data = &sm8350_dp_descs }, > { .compatible = "qcom,sm8650-dp", .data = &sm8650_dp_descs }, > > -- > 2.34.1 >
diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c index 9e58285d4ec6..7b8c695d521a 100644 --- a/drivers/gpu/drm/msm/dp/dp_display.c +++ b/drivers/gpu/drm/msm/dp/dp_display.c @@ -171,6 +171,14 @@ static const struct msm_dp_desc sm8650_dp_descs[] = { {} }; +static const struct msm_dp_desc x1e80100_dp_descs[] = { + { .io_start = 0x0ae90000, .id = MSM_DP_CONTROLLER_0, .wide_bus_en = true }, + { .io_start = 0x0ae98000, .id = MSM_DP_CONTROLLER_1, .wide_bus_en = true }, + { .io_start = 0x0ae9a000, .id = MSM_DP_CONTROLLER_2, .wide_bus_en = true }, + { .io_start = 0x0aea0000, .id = MSM_DP_CONTROLLER_3, .wide_bus_en = true }, + {} +}; + static const struct of_device_id dp_dt_match[] = { { .compatible = "qcom,sc7180-dp", .data = &sc7180_dp_descs }, { .compatible = "qcom,sc7280-dp", .data = &sc7280_dp_descs }, @@ -179,6 +187,7 @@ static const struct of_device_id dp_dt_match[] = { { .compatible = "qcom,sc8180x-edp", .data = &sc8180x_dp_descs }, { .compatible = "qcom,sc8280xp-dp", .data = &sc8280xp_dp_descs }, { .compatible = "qcom,sc8280xp-edp", .data = &sc8280xp_edp_descs }, + { .compatible = "qcom,x1e80100-dp", .data = &x1e80100_dp_descs }, { .compatible = "qcom,sdm845-dp", .data = &sc7180_dp_descs }, { .compatible = "qcom,sm8350-dp", .data = &sm8350_dp_descs }, { .compatible = "qcom,sm8650-dp", .data = &sm8650_dp_descs },
Add the X1E80100 DP descs and compatible. This platform will be using a single compatible for both eDP and DP mode. The actual mode will be set in devicetree via is-edp flag. Signed-off-by: Abel Vesa <abel.vesa@linaro.org> --- drivers/gpu/drm/msm/dp/dp_display.c | 9 +++++++++ 1 file changed, 9 insertions(+)