| Message ID | 20240223-ltdc_mp13-v3-1-7f92a59ca11f@foss.st.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add display support for stm32mp135f-dk board | expand |
diff --git a/arch/arm/boot/dts/st/stm32mp135.dtsi b/arch/arm/boot/dts/st/stm32mp135.dtsi index 68d32f9f5314..834a4d545fe4 100644 --- a/arch/arm/boot/dts/st/stm32mp135.dtsi +++ b/arch/arm/boot/dts/st/stm32mp135.dtsi @@ -19,5 +19,16 @@ dcmipp: dcmipp@5a000000 { port { }; }; + + ltdc: display-controller@5a001000 { + compatible = "st,stm32-ltdc"; + reg = <0x5a001000 0x400>; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc LTDC_PX>; + clock-names = "lcd"; + resets = <&scmi_reset RST_SCMI_LTDC>; + status = "disabled"; + }; }; };
STM32MP13x SoC family embeds a new version of LTDC (Liquid crystal display - Thin film transistor) Display Controller. It provides a parallel digital RGB (red, green, blue) and signals for horizontal, vertical synchronization, pixel clock and data enable as output to interface directly to a variety of LCD-TFT panels. Main features * 2 input layers blended together to compose the display * Cropping of layers from any input size and location * Multiple input pixel formats: – Predefined ARGB, with 7 formats: ARGB8888, ABGR8888, RGBA8888, BGRA8888, RGB565, BGR565, RGB888packed. – Flexible ARGB, allowing any width and location for A,R,G,B components. – Predefined YUV, with 3 formats: YUV422-1L (FourCC: YUYV, Interleaved), YUV420-2L (FourCC: NV12, semi planar), YUV420-3L (FourCC: Yxx, full planar) with some flexibility on the sequence of the component. * Color look-up table (CLUT) up to 256 colors (256x24 bits) per layer * Color transparency keying * Composition with flexible window position and size versus output display * Blending with flexible layer order and alpha value (per pixel or constant) * Background underlying color * Gamma with non-linear configurable table * Dithering for output with less bits per component (pseudo-random on 2 bits) * Polarity inversion for HSync, VSync, and DataEnable outputs * Output as RGB888 24 bpp or YUV422 16 bpp * Secure layer (using Layer2) capability, with grouped regs and additional interrupt set * Interrupts based on 7 different events * AXI master interface with long efficient bursts (64 or 128 bytes) Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com> Signed-off-by: Yannick Fertre <yannick.fertre@foss.st.com> --- arch/arm/boot/dts/st/stm32mp135.dtsi | 11 +++++++++++ 1 file changed, 11 insertions(+)