[v5,10/10] drm/bridge: tc358775: Configure hs_rate and lp_rate

Commit Message

Tony Lindgren Feb. 25, 2024, 6:19 a.m. UTC

The hs_rate and lp_rate may be used by the dsi host for timing
calculations. The tc358775 has a maximum bit rate of 1 Gbps/lane,
tc358765 has maximurate of 800 Mbps per lane.

Reviewed-by: Michael Walle <[e-mail]>
Signed-off-by: Tony Lindgren <[e-mail]>
---
 drivers/gpu/drm/bridge/tc358775.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

Patch

diff --git a/drivers/gpu/drm/bridge/tc358775.c b/drivers/gpu/drm/bridge/tc358775.c
--- a/drivers/gpu/drm/bridge/tc358775.c
+++ b/drivers/gpu/drm/bridge/tc358775.c
@@ -637,6 +637,19 @@  static int tc_attach_host(struct tc_data *tc)
 	dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
 			  MIPI_DSI_MODE_LPM;
 
+	/*
+	 * The hs_rate and lp_rate are data rate values. The HS mode is
+	 * differential, while the LP mode is single ended. As the HS mode
+	 * uses DDR, the DSI clock frequency is half the hs_rate. The 10 Mbs
+	 * data rate for LP mode is not specified in the bridge data sheet,
+	 * but seems to be part of the MIPI DSI spec.
+	 */
+	if (tc->type == TC358765)
+		dsi->hs_rate = 800000000;
+	else
+		dsi->hs_rate = 1000000000;
+	dsi->lp_rate = 10000000;
+
 	ret = devm_mipi_dsi_attach(dev, dsi);
 	if (ret < 0) {
 		dev_err(dev, "failed to attach dsi to host\n");