Message ID | 20240301084503.2971826-9-mitulkumar.ajitkumar.golani@intel.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | Enable Adaptive Sync SDP Support for DP | expand |
On 3/1/2024 2:15 PM, Mitul Golani wrote: > Compute vrr_vsync_start/end, which sets the position > for hardware to send the Vsync at a fixed position > relative to the end of the Vblank. > > --v2: > - Updated VSYNC_START/END macros to VRR_VSYNC_START/END. (Ankit) > - Updated bit fields of VRR_VSYNC_START/END. (Ankit) > > --v3: > - Add PIPE_CONF_CHECK_I(vrr.vsync_start/end). > - Read/write vrr_vsync params only when we intend to send > adaptive_sync sdp. > > Signed-off-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com> > --- > drivers/gpu/drm/i915/display/intel_display.c | 2 ++ > .../drm/i915/display/intel_display_types.h | 1 + > drivers/gpu/drm/i915/display/intel_vrr.c | 29 +++++++++++++++++-- > drivers/gpu/drm/i915/i915_reg.h | 7 +++++ > 4 files changed, 37 insertions(+), 2 deletions(-) > > diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c > index 88158f06bf82..f62c3ae7f0fd 100644 > --- a/drivers/gpu/drm/i915/display/intel_display.c > +++ b/drivers/gpu/drm/i915/display/intel_display.c > @@ -5377,6 +5377,8 @@ intel_pipe_config_compare(const struct intel_crtc_state *current_config, > PIPE_CONF_CHECK_I(vrr.flipline); > PIPE_CONF_CHECK_I(vrr.pipeline_full); > PIPE_CONF_CHECK_I(vrr.guardband); > + PIPE_CONF_CHECK_I(vrr.vsync_start); > + PIPE_CONF_CHECK_I(vrr.vsync_end); > } > > #undef PIPE_CONF_CHECK_X > diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h b/drivers/gpu/drm/i915/display/intel_display_types.h > index 098957cea25b..e8ba3c077569 100644 > --- a/drivers/gpu/drm/i915/display/intel_display_types.h > +++ b/drivers/gpu/drm/i915/display/intel_display_types.h > @@ -1423,6 +1423,7 @@ struct intel_crtc_state { > bool enable, in_range; > u8 pipeline_full; > u16 flipline, vmin, vmax, guardband; > + u32 vsync_end, vsync_start; > } vrr; > > /* Stream Splitter for eDP MSO */ > diff --git a/drivers/gpu/drm/i915/display/intel_vrr.c b/drivers/gpu/drm/i915/display/intel_vrr.c > index 5d905f932cb4..d24a42902e69 100644 > --- a/drivers/gpu/drm/i915/display/intel_vrr.c > +++ b/drivers/gpu/drm/i915/display/intel_vrr.c > @@ -9,6 +9,7 @@ > #include "intel_de.h" > #include "intel_display_types.h" > #include "intel_vrr.h" > +#include "intel_dp.h" > > bool intel_vrr_is_capable(struct intel_connector *connector) > { > @@ -113,6 +114,7 @@ intel_vrr_compute_config(struct intel_crtc_state *crtc_state, > struct drm_i915_private *i915 = to_i915(crtc->base.dev); > struct intel_connector *connector = > to_intel_connector(conn_state->connector); > + struct intel_dp *intel_dp = intel_attached_dp(connector); > struct drm_display_mode *adjusted_mode = &crtc_state->hw.adjusted_mode; > const struct drm_display_info *info = &connector->base.display_info; > int vmin, vmax; > @@ -165,6 +167,15 @@ intel_vrr_compute_config(struct intel_crtc_state *crtc_state, > if (crtc_state->uapi.vrr_enabled) { > crtc_state->vrr.enable = true; > crtc_state->mode_flags |= I915_MODE_FLAG_VRR; > + > + if (intel_dp_as_sdp_supported(intel_dp)) { > + crtc_state->vrr.vsync_start = > + (crtc_state->hw.adjusted_mode.crtc_vtotal - > + VRR_VSYNC_START(crtc_state->hw.adjusted_mode.vsync_start)); > + crtc_state->vrr.vsync_end = > + (crtc_state->hw.adjusted_mode.crtc_vtotal - > + (VRR_VSYNC_END(crtc_state->hw.adjusted_mode.vsync_end) >> 16)); I think you are using the VRR_SYNC_START/END macros incorrectly. We dont need to use these macros here. > + } > } > } > > @@ -203,6 +214,10 @@ void intel_vrr_set_transcoder_timings(const struct intel_crtc_state *crtc_state) > intel_de_write(dev_priv, TRANS_VRR_VMAX(cpu_transcoder), crtc_state->vrr.vmax - 1); > intel_de_write(dev_priv, TRANS_VRR_CTL(cpu_transcoder), trans_vrr_ctl(crtc_state)); > intel_de_write(dev_priv, TRANS_VRR_FLIPLINE(cpu_transcoder), crtc_state->vrr.flipline - 1); > + > + if (crtc_state->vrr.vsync_end && crtc_state->vrr.vsync_start) > + intel_de_write(dev_priv, TRANS_VRR_VSYNC(cpu_transcoder), > + crtc_state->vrr.vsync_end << 16 | crtc_state->vrr.vsync_start); Here is where the macros should be used. VRR_SYNC_END(crtc_state->vrr.vsync_end) | VRR_SYNC_START(crtc_state->vrr.vsync_start); > } > > void intel_vrr_send_push(const struct intel_crtc_state *crtc_state) > @@ -263,7 +278,7 @@ void intel_vrr_get_config(struct intel_crtc_state *crtc_state) > { > struct drm_i915_private *dev_priv = to_i915(crtc_state->uapi.crtc->dev); > enum transcoder cpu_transcoder = crtc_state->cpu_transcoder; > - u32 trans_vrr_ctl; > + u32 trans_vrr_ctl, trans_vrr_vsync; > > trans_vrr_ctl = intel_de_read(dev_priv, TRANS_VRR_CTL(cpu_transcoder)); > > @@ -283,6 +298,16 @@ void intel_vrr_get_config(struct intel_crtc_state *crtc_state) > crtc_state->vrr.vmin = intel_de_read(dev_priv, TRANS_VRR_VMIN(cpu_transcoder)) + 1; > } > > - if (crtc_state->vrr.enable) > + if (crtc_state->vrr.enable) { > crtc_state->mode_flags |= I915_MODE_FLAG_VRR; > + > + if (HAS_AS_SDP(dev_priv)) { > + trans_vrr_vsync = > + intel_de_read(dev_priv, TRANS_VRR_VSYNC(cpu_transcoder)); > + crtc_state->vrr.vsync_start = > + trans_vrr_vsync & VRR_VSYNC_START_MASK; > + crtc_state->vrr.vsync_end = > + trans_vrr_vsync & VRR_VSYNC_START_MASK; Here too you should use REG_FIELD_GET(VRR_VSYNC_START/END_MASK, trans_vrr_vsync) to fill crtc_state->vrr.sync_start/end. Regards, Ankit > + } > + } > } > diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h > index dce276236707..53d8eb7ea1ea 100644 > --- a/drivers/gpu/drm/i915/i915_reg.h > +++ b/drivers/gpu/drm/i915/i915_reg.h > @@ -2007,7 +2007,9 @@ > #define _TRANS_VRR_CTL_B 0x61420 > #define _TRANS_VRR_CTL_C 0x62420 > #define _TRANS_VRR_CTL_D 0x63420 > +#define _TRANS_VRR_VSYNC_A 0x60078 > #define TRANS_VRR_CTL(trans) _MMIO_TRANS2(trans, _TRANS_VRR_CTL_A) > +#define TRANS_VRR_VSYNC(trans) _MMIO_TRANS2(trans, _TRANS_VRR_VSYNC_A) > #define VRR_CTL_VRR_ENABLE REG_BIT(31) > #define VRR_CTL_IGN_MAX_SHIFT REG_BIT(30) > #define VRR_CTL_FLIP_LINE_EN REG_BIT(29) > @@ -2087,6 +2089,11 @@ > #define TRANS_VRR_STATUS2(trans) _MMIO_TRANS2(trans, _TRANS_VRR_STATUS2_A) > #define VRR_STATUS2_VERT_LN_CNT_MASK REG_GENMASK(19, 0) > > +#define VRR_VSYNC_END_MASK REG_GENMASK(28, 16) > +#define VRR_VSYNC_END(vsync_end) REG_FIELD_PREP(VSYNC_END_MASK, (vsync_end)) > +#define VRR_VSYNC_START_MASK REG_GENMASK(12, 0) > +#define VRR_VSYNC_START(vsync_start) REG_FIELD_PREP(VSYNC_START_MASK, (vsync_start)) > + > #define _TRANS_PUSH_A 0x60A70 > #define _TRANS_PUSH_B 0x61A70 > #define _TRANS_PUSH_C 0x62A70
diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c index 88158f06bf82..f62c3ae7f0fd 100644 --- a/drivers/gpu/drm/i915/display/intel_display.c +++ b/drivers/gpu/drm/i915/display/intel_display.c @@ -5377,6 +5377,8 @@ intel_pipe_config_compare(const struct intel_crtc_state *current_config, PIPE_CONF_CHECK_I(vrr.flipline); PIPE_CONF_CHECK_I(vrr.pipeline_full); PIPE_CONF_CHECK_I(vrr.guardband); + PIPE_CONF_CHECK_I(vrr.vsync_start); + PIPE_CONF_CHECK_I(vrr.vsync_end); } #undef PIPE_CONF_CHECK_X diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h b/drivers/gpu/drm/i915/display/intel_display_types.h index 098957cea25b..e8ba3c077569 100644 --- a/drivers/gpu/drm/i915/display/intel_display_types.h +++ b/drivers/gpu/drm/i915/display/intel_display_types.h @@ -1423,6 +1423,7 @@ struct intel_crtc_state { bool enable, in_range; u8 pipeline_full; u16 flipline, vmin, vmax, guardband; + u32 vsync_end, vsync_start; } vrr; /* Stream Splitter for eDP MSO */ diff --git a/drivers/gpu/drm/i915/display/intel_vrr.c b/drivers/gpu/drm/i915/display/intel_vrr.c index 5d905f932cb4..d24a42902e69 100644 --- a/drivers/gpu/drm/i915/display/intel_vrr.c +++ b/drivers/gpu/drm/i915/display/intel_vrr.c @@ -9,6 +9,7 @@ #include "intel_de.h" #include "intel_display_types.h" #include "intel_vrr.h" +#include "intel_dp.h" bool intel_vrr_is_capable(struct intel_connector *connector) { @@ -113,6 +114,7 @@ intel_vrr_compute_config(struct intel_crtc_state *crtc_state, struct drm_i915_private *i915 = to_i915(crtc->base.dev); struct intel_connector *connector = to_intel_connector(conn_state->connector); + struct intel_dp *intel_dp = intel_attached_dp(connector); struct drm_display_mode *adjusted_mode = &crtc_state->hw.adjusted_mode; const struct drm_display_info *info = &connector->base.display_info; int vmin, vmax; @@ -165,6 +167,15 @@ intel_vrr_compute_config(struct intel_crtc_state *crtc_state, if (crtc_state->uapi.vrr_enabled) { crtc_state->vrr.enable = true; crtc_state->mode_flags |= I915_MODE_FLAG_VRR; + + if (intel_dp_as_sdp_supported(intel_dp)) { + crtc_state->vrr.vsync_start = + (crtc_state->hw.adjusted_mode.crtc_vtotal - + VRR_VSYNC_START(crtc_state->hw.adjusted_mode.vsync_start)); + crtc_state->vrr.vsync_end = + (crtc_state->hw.adjusted_mode.crtc_vtotal - + (VRR_VSYNC_END(crtc_state->hw.adjusted_mode.vsync_end) >> 16)); + } } } @@ -203,6 +214,10 @@ void intel_vrr_set_transcoder_timings(const struct intel_crtc_state *crtc_state) intel_de_write(dev_priv, TRANS_VRR_VMAX(cpu_transcoder), crtc_state->vrr.vmax - 1); intel_de_write(dev_priv, TRANS_VRR_CTL(cpu_transcoder), trans_vrr_ctl(crtc_state)); intel_de_write(dev_priv, TRANS_VRR_FLIPLINE(cpu_transcoder), crtc_state->vrr.flipline - 1); + + if (crtc_state->vrr.vsync_end && crtc_state->vrr.vsync_start) + intel_de_write(dev_priv, TRANS_VRR_VSYNC(cpu_transcoder), + crtc_state->vrr.vsync_end << 16 | crtc_state->vrr.vsync_start); } void intel_vrr_send_push(const struct intel_crtc_state *crtc_state) @@ -263,7 +278,7 @@ void intel_vrr_get_config(struct intel_crtc_state *crtc_state) { struct drm_i915_private *dev_priv = to_i915(crtc_state->uapi.crtc->dev); enum transcoder cpu_transcoder = crtc_state->cpu_transcoder; - u32 trans_vrr_ctl; + u32 trans_vrr_ctl, trans_vrr_vsync; trans_vrr_ctl = intel_de_read(dev_priv, TRANS_VRR_CTL(cpu_transcoder)); @@ -283,6 +298,16 @@ void intel_vrr_get_config(struct intel_crtc_state *crtc_state) crtc_state->vrr.vmin = intel_de_read(dev_priv, TRANS_VRR_VMIN(cpu_transcoder)) + 1; } - if (crtc_state->vrr.enable) + if (crtc_state->vrr.enable) { crtc_state->mode_flags |= I915_MODE_FLAG_VRR; + + if (HAS_AS_SDP(dev_priv)) { + trans_vrr_vsync = + intel_de_read(dev_priv, TRANS_VRR_VSYNC(cpu_transcoder)); + crtc_state->vrr.vsync_start = + trans_vrr_vsync & VRR_VSYNC_START_MASK; + crtc_state->vrr.vsync_end = + trans_vrr_vsync & VRR_VSYNC_START_MASK; + } + } } diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index dce276236707..53d8eb7ea1ea 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -2007,7 +2007,9 @@ #define _TRANS_VRR_CTL_B 0x61420 #define _TRANS_VRR_CTL_C 0x62420 #define _TRANS_VRR_CTL_D 0x63420 +#define _TRANS_VRR_VSYNC_A 0x60078 #define TRANS_VRR_CTL(trans) _MMIO_TRANS2(trans, _TRANS_VRR_CTL_A) +#define TRANS_VRR_VSYNC(trans) _MMIO_TRANS2(trans, _TRANS_VRR_VSYNC_A) #define VRR_CTL_VRR_ENABLE REG_BIT(31) #define VRR_CTL_IGN_MAX_SHIFT REG_BIT(30) #define VRR_CTL_FLIP_LINE_EN REG_BIT(29) @@ -2087,6 +2089,11 @@ #define TRANS_VRR_STATUS2(trans) _MMIO_TRANS2(trans, _TRANS_VRR_STATUS2_A) #define VRR_STATUS2_VERT_LN_CNT_MASK REG_GENMASK(19, 0) +#define VRR_VSYNC_END_MASK REG_GENMASK(28, 16) +#define VRR_VSYNC_END(vsync_end) REG_FIELD_PREP(VSYNC_END_MASK, (vsync_end)) +#define VRR_VSYNC_START_MASK REG_GENMASK(12, 0) +#define VRR_VSYNC_START(vsync_start) REG_FIELD_PREP(VSYNC_START_MASK, (vsync_start)) + #define _TRANS_PUSH_A 0x60A70 #define _TRANS_PUSH_B 0x61A70 #define _TRANS_PUSH_C 0x62A70
Compute vrr_vsync_start/end, which sets the position for hardware to send the Vsync at a fixed position relative to the end of the Vblank. --v2: - Updated VSYNC_START/END macros to VRR_VSYNC_START/END. (Ankit) - Updated bit fields of VRR_VSYNC_START/END. (Ankit) --v3: - Add PIPE_CONF_CHECK_I(vrr.vsync_start/end). - Read/write vrr_vsync params only when we intend to send adaptive_sync sdp. Signed-off-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com> --- drivers/gpu/drm/i915/display/intel_display.c | 2 ++ .../drm/i915/display/intel_display_types.h | 1 + drivers/gpu/drm/i915/display/intel_vrr.c | 29 +++++++++++++++++-- drivers/gpu/drm/i915/i915_reg.h | 7 +++++ 4 files changed, 37 insertions(+), 2 deletions(-)