| Message ID | 20240329170038.3863998-4-eahariha@linux.microsoft.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Make I2C terminology more inclusive for I2C Algobit and consumers | expand |
On Fri, 29 Mar 2024, Easwar Hariharan <eahariha@linux.microsoft.com> wrote: > I2C v7, SMBus 3.2, and I3C specifications have replaced "master/slave" > with more appropriate terms. Inspired by and following on to Wolfram's > series to fix drivers/i2c/[1], fix the terminology for users of > I2C_ALGOBIT bitbanging interface, now that the approved verbiage exists > in the specification. gma500 and i915 changes should be split. See MAINTAINERS. Might also split the i915 changes to smaller pieces, it's kind of random. And the changes here are not strictly related to I2C AFAICT, so the commit message should be updated. BR, Jani. > > Compile tested, no functionality changes intended > > [1]: > https://lore.kernel.org/all/20240322132619.6389-1-wsa+renesas@sang-engineering.com/ > > Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com> > --- > drivers/gpu/drm/gma500/cdv_intel_lvds.c | 2 +- > drivers/gpu/drm/gma500/intel_bios.c | 22 +++++++------- > drivers/gpu/drm/gma500/intel_bios.h | 4 +-- > drivers/gpu/drm/gma500/intel_gmbus.c | 2 +- > drivers/gpu/drm/gma500/psb_drv.h | 2 +- > drivers/gpu/drm/gma500/psb_intel_drv.h | 2 +- > drivers/gpu/drm/gma500/psb_intel_lvds.c | 4 +-- > drivers/gpu/drm/gma500/psb_intel_sdvo.c | 26 ++++++++-------- > drivers/gpu/drm/i915/display/dvo_ch7017.c | 14 ++++----- > drivers/gpu/drm/i915/display/dvo_ch7xxx.c | 18 +++++------ > drivers/gpu/drm/i915/display/dvo_ivch.c | 16 +++++----- > drivers/gpu/drm/i915/display/dvo_ns2501.c | 18 +++++------ > drivers/gpu/drm/i915/display/dvo_sil164.c | 18 +++++------ > drivers/gpu/drm/i915/display/dvo_tfp410.c | 18 +++++------ > drivers/gpu/drm/i915/display/intel_bios.c | 22 +++++++------- > drivers/gpu/drm/i915/display/intel_ddi.c | 2 +- > .../gpu/drm/i915/display/intel_display_core.h | 2 +- > drivers/gpu/drm/i915/display/intel_dsi.h | 2 +- > drivers/gpu/drm/i915/display/intel_dsi_vbt.c | 18 +++++------ > drivers/gpu/drm/i915/display/intel_dvo.c | 14 ++++----- > drivers/gpu/drm/i915/display/intel_dvo_dev.h | 2 +- > drivers/gpu/drm/i915/display/intel_gmbus.c | 4 +-- > drivers/gpu/drm/i915/display/intel_sdvo.c | 30 +++++++++---------- > drivers/gpu/drm/i915/display/intel_vbt_defs.h | 4 +-- > drivers/gpu/drm/i915/gvt/edid.c | 28 ++++++++--------- > drivers/gpu/drm/i915/gvt/edid.h | 4 +-- > drivers/gpu/drm/i915/gvt/opregion.c | 2 +- > 27 files changed, 150 insertions(+), 150 deletions(-) > > diff --git a/drivers/gpu/drm/gma500/cdv_intel_lvds.c b/drivers/gpu/drm/gma500/cdv_intel_lvds.c > index f08a6803dc18..84c9122062c4 100644 > --- a/drivers/gpu/drm/gma500/cdv_intel_lvds.c > +++ b/drivers/gpu/drm/gma500/cdv_intel_lvds.c > @@ -565,7 +565,7 @@ void cdv_intel_lvds_init(struct drm_device *dev, > dev->dev, "I2C bus registration failed.\n"); > goto err_encoder_cleanup; > } > - gma_encoder->i2c_bus->slave_addr = 0x2C; > + gma_encoder->i2c_bus->client_addr = 0x2C; > dev_priv->lvds_i2c_bus = gma_encoder->i2c_bus; > > /* > diff --git a/drivers/gpu/drm/gma500/intel_bios.c b/drivers/gpu/drm/gma500/intel_bios.c > index 8245b5603d2c..333bece1a64f 100644 > --- a/drivers/gpu/drm/gma500/intel_bios.c > +++ b/drivers/gpu/drm/gma500/intel_bios.c > @@ -14,8 +14,8 @@ > #include "psb_intel_drv.h" > #include "psb_intel_reg.h" > > -#define SLAVE_ADDR1 0x70 > -#define SLAVE_ADDR2 0x72 > +#define CLIENT_ADDR1 0x70 > +#define CLIENT_ADDR2 0x72 > > static void *find_section(struct bdb_header *bdb, int section_id) > { > @@ -357,10 +357,10 @@ parse_sdvo_device_mapping(struct drm_psb_private *dev_priv, > /* skip the device block if device type is invalid */ > continue; > } > - if (p_child->slave_addr != SLAVE_ADDR1 && > - p_child->slave_addr != SLAVE_ADDR2) { > + if (p_child->client_addr != CLIENT_ADDR1 && > + p_child->client_addr != CLIENT_ADDR2) { > /* > - * If the slave address is neither 0x70 nor 0x72, > + * If the client address is neither 0x70 nor 0x72, > * it is not a SDVO device. Skip it. > */ > continue; > @@ -371,22 +371,22 @@ parse_sdvo_device_mapping(struct drm_psb_private *dev_priv, > DRM_DEBUG_KMS("Incorrect SDVO port. Skip it\n"); > continue; > } > - DRM_DEBUG_KMS("the SDVO device with slave addr %2x is found on" > + DRM_DEBUG_KMS("the SDVO device with client addr %2x is found on" > " %s port\n", > - p_child->slave_addr, > + p_child->client_addr, > (p_child->dvo_port == DEVICE_PORT_DVOB) ? > "SDVOB" : "SDVOC"); > p_mapping = &(dev_priv->sdvo_mappings[p_child->dvo_port - 1]); > if (!p_mapping->initialized) { > p_mapping->dvo_port = p_child->dvo_port; > - p_mapping->slave_addr = p_child->slave_addr; > + p_mapping->client_addr = p_child->client_addr; > p_mapping->dvo_wiring = p_child->dvo_wiring; > p_mapping->ddc_pin = p_child->ddc_pin; > p_mapping->i2c_pin = p_child->i2c_pin; > p_mapping->initialized = 1; > DRM_DEBUG_KMS("SDVO device: dvo=%x, addr=%x, wiring=%d, ddc_pin=%d, i2c_pin=%d\n", > p_mapping->dvo_port, > - p_mapping->slave_addr, > + p_mapping->client_addr, > p_mapping->dvo_wiring, > p_mapping->ddc_pin, > p_mapping->i2c_pin); > @@ -394,10 +394,10 @@ parse_sdvo_device_mapping(struct drm_psb_private *dev_priv, > DRM_DEBUG_KMS("Maybe one SDVO port is shared by " > "two SDVO device.\n"); > } > - if (p_child->slave2_addr) { > + if (p_child->client2_addr) { > /* Maybe this is a SDVO device with multiple inputs */ > /* And the mapping info is not added */ > - DRM_DEBUG_KMS("there exists the slave2_addr. Maybe this" > + DRM_DEBUG_KMS("there exists the client2_addr. Maybe this" > " is a SDVO device with multiple inputs.\n"); > } > count++; > diff --git a/drivers/gpu/drm/gma500/intel_bios.h b/drivers/gpu/drm/gma500/intel_bios.h > index 0e6facf21e33..cfca33427f94 100644 > --- a/drivers/gpu/drm/gma500/intel_bios.h > +++ b/drivers/gpu/drm/gma500/intel_bios.h > @@ -186,13 +186,13 @@ struct child_device_config { > u16 addin_offset; > u8 dvo_port; /* See Device_PORT_* above */ > u8 i2c_pin; > - u8 slave_addr; > + u8 client_addr; > u8 ddc_pin; > u16 edid_ptr; > u8 dvo_cfg; /* See DEVICE_CFG_* above */ > u8 dvo2_port; > u8 i2c2_pin; > - u8 slave2_addr; > + u8 client2_addr; > u8 ddc2_pin; > u8 capabilities; > u8 dvo_wiring;/* See DEVICE_WIRE_* above */ > diff --git a/drivers/gpu/drm/gma500/intel_gmbus.c b/drivers/gpu/drm/gma500/intel_gmbus.c > index aa45509859f2..94cf854b1d3d 100644 > --- a/drivers/gpu/drm/gma500/intel_gmbus.c > +++ b/drivers/gpu/drm/gma500/intel_gmbus.c > @@ -333,7 +333,7 @@ gmbus_xfer(struct i2c_adapter *adapter, > clear_err: > /* Toggle the Software Clear Interrupt bit. This has the effect > * of resetting the GMBUS controller and so clearing the > - * BUS_ERROR raised by the slave's NAK. > + * BUS_ERROR raised by the client's NAK. > */ > GMBUS_REG_WRITE(GMBUS1 + reg_offset, GMBUS_SW_CLR_INT); > GMBUS_REG_WRITE(GMBUS1 + reg_offset, 0); > diff --git a/drivers/gpu/drm/gma500/psb_drv.h b/drivers/gpu/drm/gma500/psb_drv.h > index c5edfa4aa4cc..bbf3af1b01cd 100644 > --- a/drivers/gpu/drm/gma500/psb_drv.h > +++ b/drivers/gpu/drm/gma500/psb_drv.h > @@ -203,7 +203,7 @@ struct psb_intel_opregion { > struct sdvo_device_mapping { > u8 initialized; > u8 dvo_port; > - u8 slave_addr; > + u8 client_addr; > u8 dvo_wiring; > u8 i2c_pin; > u8 i2c_speed; > diff --git a/drivers/gpu/drm/gma500/psb_intel_drv.h b/drivers/gpu/drm/gma500/psb_intel_drv.h > index c111e933e1ed..3536414c1988 100644 > --- a/drivers/gpu/drm/gma500/psb_intel_drv.h > +++ b/drivers/gpu/drm/gma500/psb_intel_drv.h > @@ -80,7 +80,7 @@ struct psb_intel_mode_device { > struct gma_i2c_chan { > struct i2c_adapter base; > struct i2c_algo_bit_data algo; > - u8 slave_addr; > + u8 client_addr; > > /* for getting at dev. private (mmio etc.) */ > struct drm_device *drm_dev; > diff --git a/drivers/gpu/drm/gma500/psb_intel_lvds.c b/drivers/gpu/drm/gma500/psb_intel_lvds.c > index 8486de230ec9..3ce54aaf92ce 100644 > --- a/drivers/gpu/drm/gma500/psb_intel_lvds.c > +++ b/drivers/gpu/drm/gma500/psb_intel_lvds.c > @@ -97,7 +97,7 @@ static int psb_lvds_i2c_set_brightness(struct drm_device *dev, > > struct i2c_msg msgs[] = { > { > - .addr = lvds_i2c_bus->slave_addr, > + .addr = lvds_i2c_bus->client_addr, > .flags = 0, > .len = 2, > .buf = out_buf, > @@ -707,7 +707,7 @@ void psb_intel_lvds_init(struct drm_device *dev, > dev->dev, "I2C bus registration failed.\n"); > goto err_encoder_cleanup; > } > - lvds_priv->i2c_bus->slave_addr = 0x2C; > + lvds_priv->i2c_bus->client_addr = 0x2C; > dev_priv->lvds_i2c_bus = lvds_priv->i2c_bus; > > /* > diff --git a/drivers/gpu/drm/gma500/psb_intel_sdvo.c b/drivers/gpu/drm/gma500/psb_intel_sdvo.c > index e4f914deceba..39a3b696efc5 100644 > --- a/drivers/gpu/drm/gma500/psb_intel_sdvo.c > +++ b/drivers/gpu/drm/gma500/psb_intel_sdvo.c > @@ -70,7 +70,7 @@ struct psb_intel_sdvo { > struct gma_encoder base; > > struct i2c_adapter *i2c; > - u8 slave_addr; > + u8 client_addr; > > struct i2c_adapter ddc; > > @@ -259,13 +259,13 @@ static bool psb_intel_sdvo_read_byte(struct psb_intel_sdvo *psb_intel_sdvo, u8 a > { > struct i2c_msg msgs[] = { > { > - .addr = psb_intel_sdvo->slave_addr, > + .addr = psb_intel_sdvo->client_addr, > .flags = 0, > .len = 1, > .buf = &addr, > }, > { > - .addr = psb_intel_sdvo->slave_addr, > + .addr = psb_intel_sdvo->client_addr, > .flags = I2C_M_RD, > .len = 1, > .buf = ch, > @@ -463,14 +463,14 @@ static bool psb_intel_sdvo_write_cmd(struct psb_intel_sdvo *psb_intel_sdvo, u8 c > psb_intel_sdvo_debug_write(psb_intel_sdvo, cmd, args, args_len); > > for (i = 0; i < args_len; i++) { > - msgs[i].addr = psb_intel_sdvo->slave_addr; > + msgs[i].addr = psb_intel_sdvo->client_addr; > msgs[i].flags = 0; > msgs[i].len = 2; > msgs[i].buf = buf + 2 *i; > buf[2*i + 0] = SDVO_I2C_ARG_0 - i; > buf[2*i + 1] = ((u8*)args)[i]; > } > - msgs[i].addr = psb_intel_sdvo->slave_addr; > + msgs[i].addr = psb_intel_sdvo->client_addr; > msgs[i].flags = 0; > msgs[i].len = 2; > msgs[i].buf = buf + 2*i; > @@ -479,12 +479,12 @@ static bool psb_intel_sdvo_write_cmd(struct psb_intel_sdvo *psb_intel_sdvo, u8 c > > /* the following two are to read the response */ > status = SDVO_I2C_CMD_STATUS; > - msgs[i+1].addr = psb_intel_sdvo->slave_addr; > + msgs[i+1].addr = psb_intel_sdvo->client_addr; > msgs[i+1].flags = 0; > msgs[i+1].len = 1; > msgs[i+1].buf = &status; > > - msgs[i+2].addr = psb_intel_sdvo->slave_addr; > + msgs[i+2].addr = psb_intel_sdvo->client_addr; > msgs[i+2].flags = I2C_M_RD; > msgs[i+2].len = 1; > msgs[i+2].buf = &status; > @@ -1899,7 +1899,7 @@ psb_intel_sdvo_is_hdmi_connector(struct psb_intel_sdvo *psb_intel_sdvo, int devi > } > > static u8 > -psb_intel_sdvo_get_slave_addr(struct drm_device *dev, int sdvo_reg) > +psb_intel_sdvo_get_client_addr(struct drm_device *dev, int sdvo_reg) > { > struct drm_psb_private *dev_priv = to_drm_psb_private(dev); > struct sdvo_device_mapping *my_mapping, *other_mapping; > @@ -1913,14 +1913,14 @@ psb_intel_sdvo_get_slave_addr(struct drm_device *dev, int sdvo_reg) > } > > /* If the BIOS described our SDVO device, take advantage of it. */ > - if (my_mapping->slave_addr) > - return my_mapping->slave_addr; > + if (my_mapping->client_addr) > + return my_mapping->client_addr; > > /* If the BIOS only described a different SDVO device, use the > * address that it isn't using. > */ > - if (other_mapping->slave_addr) { > - if (other_mapping->slave_addr == 0x70) > + if (other_mapping->client_addr) { > + if (other_mapping->client_addr == 0x70) > return 0x72; > else > return 0x70; > @@ -2446,7 +2446,7 @@ bool psb_intel_sdvo_init(struct drm_device *dev, int sdvo_reg) > return false; > > psb_intel_sdvo->sdvo_reg = sdvo_reg; > - psb_intel_sdvo->slave_addr = psb_intel_sdvo_get_slave_addr(dev, sdvo_reg) >> 1; > + psb_intel_sdvo->client_addr = psb_intel_sdvo_get_client_addr(dev, sdvo_reg) >> 1; > psb_intel_sdvo_select_i2c_bus(dev_priv, psb_intel_sdvo, sdvo_reg); > if (!psb_intel_sdvo_init_ddc_proxy(psb_intel_sdvo, dev)) { > kfree(psb_intel_sdvo); > diff --git a/drivers/gpu/drm/i915/display/dvo_ch7017.c b/drivers/gpu/drm/i915/display/dvo_ch7017.c > index d0c3880d7f80..b9d04581b820 100644 > --- a/drivers/gpu/drm/i915/display/dvo_ch7017.c > +++ b/drivers/gpu/drm/i915/display/dvo_ch7017.c > @@ -170,13 +170,13 @@ static bool ch7017_read(struct intel_dvo_device *dvo, u8 addr, u8 *val) > { > struct i2c_msg msgs[] = { > { > - .addr = dvo->slave_addr, > + .addr = dvo->client_addr, > .flags = 0, > .len = 1, > .buf = &addr, > }, > { > - .addr = dvo->slave_addr, > + .addr = dvo->client_addr, > .flags = I2C_M_RD, > .len = 1, > .buf = val, > @@ -189,7 +189,7 @@ static bool ch7017_write(struct intel_dvo_device *dvo, u8 addr, u8 val) > { > u8 buf[2] = { addr, val }; > struct i2c_msg msg = { > - .addr = dvo->slave_addr, > + .addr = dvo->client_addr, > .flags = 0, > .len = 2, > .buf = buf, > @@ -197,7 +197,7 @@ static bool ch7017_write(struct intel_dvo_device *dvo, u8 addr, u8 val) > return i2c_transfer(dvo->i2c_bus, &msg, 1) == 1; > } > > -/** Probes for a CH7017 on the given bus and slave address. */ > +/** Probes for a CH7017 on the given bus and client address. */ > static bool ch7017_init(struct intel_dvo_device *dvo, > struct i2c_adapter *adapter) > { > @@ -227,13 +227,13 @@ static bool ch7017_init(struct intel_dvo_device *dvo, > break; > default: > DRM_DEBUG_KMS("ch701x not detected, got %d: from %s " > - "slave %d.\n", > - val, adapter->name, dvo->slave_addr); > + "client %d.\n", > + val, adapter->name, dvo->client_addr); > goto fail; > } > > DRM_DEBUG_KMS("%s detected on %s, addr %d\n", > - str, adapter->name, dvo->slave_addr); > + str, adapter->name, dvo->client_addr); > return true; > > fail: > diff --git a/drivers/gpu/drm/i915/display/dvo_ch7xxx.c b/drivers/gpu/drm/i915/display/dvo_ch7xxx.c > index 2e8e85da5a40..8e36d6e2dde0 100644 > --- a/drivers/gpu/drm/i915/display/dvo_ch7xxx.c > +++ b/drivers/gpu/drm/i915/display/dvo_ch7xxx.c > @@ -153,13 +153,13 @@ static bool ch7xxx_readb(struct intel_dvo_device *dvo, int addr, u8 *ch) > > struct i2c_msg msgs[] = { > { > - .addr = dvo->slave_addr, > + .addr = dvo->client_addr, > .flags = 0, > .len = 1, > .buf = out_buf, > }, > { > - .addr = dvo->slave_addr, > + .addr = dvo->client_addr, > .flags = I2C_M_RD, > .len = 1, > .buf = in_buf, > @@ -176,7 +176,7 @@ static bool ch7xxx_readb(struct intel_dvo_device *dvo, int addr, u8 *ch) > > if (!ch7xxx->quiet) { > DRM_DEBUG_KMS("Unable to read register 0x%02x from %s:%02x.\n", > - addr, adapter->name, dvo->slave_addr); > + addr, adapter->name, dvo->client_addr); > } > return false; > } > @@ -188,7 +188,7 @@ static bool ch7xxx_writeb(struct intel_dvo_device *dvo, int addr, u8 ch) > struct i2c_adapter *adapter = dvo->i2c_bus; > u8 out_buf[2]; > struct i2c_msg msg = { > - .addr = dvo->slave_addr, > + .addr = dvo->client_addr, > .flags = 0, > .len = 2, > .buf = out_buf, > @@ -202,7 +202,7 @@ static bool ch7xxx_writeb(struct intel_dvo_device *dvo, int addr, u8 ch) > > if (!ch7xxx->quiet) { > DRM_DEBUG_KMS("Unable to write register 0x%02x to %s:%d.\n", > - addr, adapter->name, dvo->slave_addr); > + addr, adapter->name, dvo->client_addr); > } > > return false; > @@ -229,8 +229,8 @@ static bool ch7xxx_init(struct intel_dvo_device *dvo, > > name = ch7xxx_get_id(vendor); > if (!name) { > - DRM_DEBUG_KMS("ch7xxx not detected; got VID 0x%02x from %s slave %d.\n", > - vendor, adapter->name, dvo->slave_addr); > + DRM_DEBUG_KMS("ch7xxx not detected; got VID 0x%02x from %s client %d.\n", > + vendor, adapter->name, dvo->client_addr); > goto out; > } > > @@ -240,8 +240,8 @@ static bool ch7xxx_init(struct intel_dvo_device *dvo, > > devid = ch7xxx_get_did(device); > if (!devid) { > - DRM_DEBUG_KMS("ch7xxx not detected; got DID 0x%02x from %s slave %d.\n", > - device, adapter->name, dvo->slave_addr); > + DRM_DEBUG_KMS("ch7xxx not detected; got DID 0x%02x from %s client %d.\n", > + device, adapter->name, dvo->client_addr); > goto out; > } > > diff --git a/drivers/gpu/drm/i915/display/dvo_ivch.c b/drivers/gpu/drm/i915/display/dvo_ivch.c > index eef72bb3b767..718bb17da2e3 100644 > --- a/drivers/gpu/drm/i915/display/dvo_ivch.c > +++ b/drivers/gpu/drm/i915/display/dvo_ivch.c > @@ -198,7 +198,7 @@ static bool ivch_read(struct intel_dvo_device *dvo, int addr, u16 *data) > > struct i2c_msg msgs[] = { > { > - .addr = dvo->slave_addr, > + .addr = dvo->client_addr, > .flags = I2C_M_RD, > .len = 0, > }, > @@ -209,7 +209,7 @@ static bool ivch_read(struct intel_dvo_device *dvo, int addr, u16 *data) > .buf = out_buf, > }, > { > - .addr = dvo->slave_addr, > + .addr = dvo->client_addr, > .flags = I2C_M_RD | I2C_M_NOSTART, > .len = 2, > .buf = in_buf, > @@ -226,7 +226,7 @@ static bool ivch_read(struct intel_dvo_device *dvo, int addr, u16 *data) > if (!priv->quiet) { > DRM_DEBUG_KMS("Unable to read register 0x%02x from " > "%s:%02x.\n", > - addr, adapter->name, dvo->slave_addr); > + addr, adapter->name, dvo->client_addr); > } > return false; > } > @@ -238,7 +238,7 @@ static bool ivch_write(struct intel_dvo_device *dvo, int addr, u16 data) > struct i2c_adapter *adapter = dvo->i2c_bus; > u8 out_buf[3]; > struct i2c_msg msg = { > - .addr = dvo->slave_addr, > + .addr = dvo->client_addr, > .flags = 0, > .len = 3, > .buf = out_buf, > @@ -253,13 +253,13 @@ static bool ivch_write(struct intel_dvo_device *dvo, int addr, u16 data) > > if (!priv->quiet) { > DRM_DEBUG_KMS("Unable to write register 0x%02x to %s:%d.\n", > - addr, adapter->name, dvo->slave_addr); > + addr, adapter->name, dvo->client_addr); > } > > return false; > } > > -/* Probes the given bus and slave address for an ivch */ > +/* Probes the given bus and client address for an ivch */ > static bool ivch_init(struct intel_dvo_device *dvo, > struct i2c_adapter *adapter) > { > @@ -283,10 +283,10 @@ static bool ivch_init(struct intel_dvo_device *dvo, > * very unique, check that the value in the base address field matches > * the address it's responding on. > */ > - if ((temp & VR00_BASE_ADDRESS_MASK) != dvo->slave_addr) { > + if ((temp & VR00_BASE_ADDRESS_MASK) != dvo->client_addr) { > DRM_DEBUG_KMS("ivch detect failed due to address mismatch " > "(%d vs %d)\n", > - (temp & VR00_BASE_ADDRESS_MASK), dvo->slave_addr); > + (temp & VR00_BASE_ADDRESS_MASK), dvo->client_addr); > goto out; > } > > diff --git a/drivers/gpu/drm/i915/display/dvo_ns2501.c b/drivers/gpu/drm/i915/display/dvo_ns2501.c > index 1df212fb000e..b15875a832f5 100644 > --- a/drivers/gpu/drm/i915/display/dvo_ns2501.c > +++ b/drivers/gpu/drm/i915/display/dvo_ns2501.c > @@ -399,13 +399,13 @@ static bool ns2501_readb(struct intel_dvo_device *dvo, int addr, u8 *ch) > > struct i2c_msg msgs[] = { > { > - .addr = dvo->slave_addr, > + .addr = dvo->client_addr, > .flags = 0, > .len = 1, > .buf = out_buf, > }, > { > - .addr = dvo->slave_addr, > + .addr = dvo->client_addr, > .flags = I2C_M_RD, > .len = 1, > .buf = in_buf, > @@ -423,7 +423,7 @@ static bool ns2501_readb(struct intel_dvo_device *dvo, int addr, u8 *ch) > if (!ns->quiet) { > DRM_DEBUG_KMS > ("Unable to read register 0x%02x from %s:0x%02x.\n", addr, > - adapter->name, dvo->slave_addr); > + adapter->name, dvo->client_addr); > } > > return false; > @@ -442,7 +442,7 @@ static bool ns2501_writeb(struct intel_dvo_device *dvo, int addr, u8 ch) > u8 out_buf[2]; > > struct i2c_msg msg = { > - .addr = dvo->slave_addr, > + .addr = dvo->client_addr, > .flags = 0, > .len = 2, > .buf = out_buf, > @@ -457,7 +457,7 @@ static bool ns2501_writeb(struct intel_dvo_device *dvo, int addr, u8 ch) > > if (!ns->quiet) { > DRM_DEBUG_KMS("Unable to write register 0x%02x to %s:%d\n", > - addr, adapter->name, dvo->slave_addr); > + addr, adapter->name, dvo->client_addr); > } > > return false; > @@ -488,8 +488,8 @@ static bool ns2501_init(struct intel_dvo_device *dvo, > goto out; > > if (ch != (NS2501_VID & 0xff)) { > - DRM_DEBUG_KMS("ns2501 not detected got %d: from %s Slave %d.\n", > - ch, adapter->name, dvo->slave_addr); > + DRM_DEBUG_KMS("ns2501 not detected got %d: from %s Client %d.\n", > + ch, adapter->name, dvo->client_addr); > goto out; > } > > @@ -497,8 +497,8 @@ static bool ns2501_init(struct intel_dvo_device *dvo, > goto out; > > if (ch != (NS2501_DID & 0xff)) { > - DRM_DEBUG_KMS("ns2501 not detected got %d: from %s Slave %d.\n", > - ch, adapter->name, dvo->slave_addr); > + DRM_DEBUG_KMS("ns2501 not detected got %d: from %s Client %d.\n", > + ch, adapter->name, dvo->client_addr); > goto out; > } > ns->quiet = false; > diff --git a/drivers/gpu/drm/i915/display/dvo_sil164.c b/drivers/gpu/drm/i915/display/dvo_sil164.c > index 6c461024c8e3..e9e4433ffa14 100644 > --- a/drivers/gpu/drm/i915/display/dvo_sil164.c > +++ b/drivers/gpu/drm/i915/display/dvo_sil164.c > @@ -79,13 +79,13 @@ static bool sil164_readb(struct intel_dvo_device *dvo, int addr, u8 *ch) > > struct i2c_msg msgs[] = { > { > - .addr = dvo->slave_addr, > + .addr = dvo->client_addr, > .flags = 0, > .len = 1, > .buf = out_buf, > }, > { > - .addr = dvo->slave_addr, > + .addr = dvo->client_addr, > .flags = I2C_M_RD, > .len = 1, > .buf = in_buf, > @@ -102,7 +102,7 @@ static bool sil164_readb(struct intel_dvo_device *dvo, int addr, u8 *ch) > > if (!sil->quiet) { > DRM_DEBUG_KMS("Unable to read register 0x%02x from %s:%02x.\n", > - addr, adapter->name, dvo->slave_addr); > + addr, adapter->name, dvo->client_addr); > } > return false; > } > @@ -113,7 +113,7 @@ static bool sil164_writeb(struct intel_dvo_device *dvo, int addr, u8 ch) > struct i2c_adapter *adapter = dvo->i2c_bus; > u8 out_buf[2]; > struct i2c_msg msg = { > - .addr = dvo->slave_addr, > + .addr = dvo->client_addr, > .flags = 0, > .len = 2, > .buf = out_buf, > @@ -127,7 +127,7 @@ static bool sil164_writeb(struct intel_dvo_device *dvo, int addr, u8 ch) > > if (!sil->quiet) { > DRM_DEBUG_KMS("Unable to write register 0x%02x to %s:%d.\n", > - addr, adapter->name, dvo->slave_addr); > + addr, adapter->name, dvo->client_addr); > } > > return false; > @@ -153,8 +153,8 @@ static bool sil164_init(struct intel_dvo_device *dvo, > goto out; > > if (ch != (SIL164_VID & 0xff)) { > - DRM_DEBUG_KMS("sil164 not detected got %d: from %s Slave %d.\n", > - ch, adapter->name, dvo->slave_addr); > + DRM_DEBUG_KMS("sil164 not detected got %d: from %s Client %d.\n", > + ch, adapter->name, dvo->client_addr); > goto out; > } > > @@ -162,8 +162,8 @@ static bool sil164_init(struct intel_dvo_device *dvo, > goto out; > > if (ch != (SIL164_DID & 0xff)) { > - DRM_DEBUG_KMS("sil164 not detected got %d: from %s Slave %d.\n", > - ch, adapter->name, dvo->slave_addr); > + DRM_DEBUG_KMS("sil164 not detected got %d: from %s Client %d.\n", > + ch, adapter->name, dvo->client_addr); > goto out; > } > sil->quiet = false; > diff --git a/drivers/gpu/drm/i915/display/dvo_tfp410.c b/drivers/gpu/drm/i915/display/dvo_tfp410.c > index 0939e097f4f9..ef1385fc16e7 100644 > --- a/drivers/gpu/drm/i915/display/dvo_tfp410.c > +++ b/drivers/gpu/drm/i915/display/dvo_tfp410.c > @@ -100,13 +100,13 @@ static bool tfp410_readb(struct intel_dvo_device *dvo, int addr, u8 *ch) > > struct i2c_msg msgs[] = { > { > - .addr = dvo->slave_addr, > + .addr = dvo->client_addr, > .flags = 0, > .len = 1, > .buf = out_buf, > }, > { > - .addr = dvo->slave_addr, > + .addr = dvo->client_addr, > .flags = I2C_M_RD, > .len = 1, > .buf = in_buf, > @@ -123,7 +123,7 @@ static bool tfp410_readb(struct intel_dvo_device *dvo, int addr, u8 *ch) > > if (!tfp->quiet) { > DRM_DEBUG_KMS("Unable to read register 0x%02x from %s:%02x.\n", > - addr, adapter->name, dvo->slave_addr); > + addr, adapter->name, dvo->client_addr); > } > return false; > } > @@ -134,7 +134,7 @@ static bool tfp410_writeb(struct intel_dvo_device *dvo, int addr, u8 ch) > struct i2c_adapter *adapter = dvo->i2c_bus; > u8 out_buf[2]; > struct i2c_msg msg = { > - .addr = dvo->slave_addr, > + .addr = dvo->client_addr, > .flags = 0, > .len = 2, > .buf = out_buf, > @@ -148,7 +148,7 @@ static bool tfp410_writeb(struct intel_dvo_device *dvo, int addr, u8 ch) > > if (!tfp->quiet) { > DRM_DEBUG_KMS("Unable to write register 0x%02x to %s:%d.\n", > - addr, adapter->name, dvo->slave_addr); > + addr, adapter->name, dvo->client_addr); > } > > return false; > @@ -183,15 +183,15 @@ static bool tfp410_init(struct intel_dvo_device *dvo, > > if ((id = tfp410_getid(dvo, TFP410_VID_LO)) != TFP410_VID) { > DRM_DEBUG_KMS("tfp410 not detected got VID %X: from %s " > - "Slave %d.\n", > - id, adapter->name, dvo->slave_addr); > + "Client %d.\n", > + id, adapter->name, dvo->client_addr); > goto out; > } > > if ((id = tfp410_getid(dvo, TFP410_DID_LO)) != TFP410_DID) { > DRM_DEBUG_KMS("tfp410 not detected got DID %X: from %s " > - "Slave %d.\n", > - id, adapter->name, dvo->slave_addr); > + "Client %d.\n", > + id, adapter->name, dvo->client_addr); > goto out; > } > tfp->quiet = false; > diff --git a/drivers/gpu/drm/i915/display/intel_bios.c b/drivers/gpu/drm/i915/display/intel_bios.c > index fe52c06271ef..dbeb3a89d004 100644 > --- a/drivers/gpu/drm/i915/display/intel_bios.c > +++ b/drivers/gpu/drm/i915/display/intel_bios.c > @@ -69,8 +69,8 @@ struct intel_bios_encoder_data { > struct list_head node; > }; > > -#define SLAVE_ADDR1 0x70 > -#define SLAVE_ADDR2 0x72 > +#define CLIENT_ADDR1 0x70 > +#define CLIENT_ADDR2 0x72 > > /* Get BDB block size given a pointer to Block ID. */ > static u32 _get_blocksize(const u8 *block_base) > @@ -1231,10 +1231,10 @@ parse_sdvo_device_mapping(struct drm_i915_private *i915) > const struct child_device_config *child = &devdata->child; > struct sdvo_device_mapping *mapping; > > - if (child->slave_addr != SLAVE_ADDR1 && > - child->slave_addr != SLAVE_ADDR2) { > + if (child->client_addr != CLIENT_ADDR1 && > + child->client_addr != CLIENT_ADDR2) { > /* > - * If the slave address is neither 0x70 nor 0x72, > + * If the client address is neither 0x70 nor 0x72, > * it is not a SDVO device. Skip it. > */ > continue; > @@ -1247,22 +1247,22 @@ parse_sdvo_device_mapping(struct drm_i915_private *i915) > continue; > } > drm_dbg_kms(&i915->drm, > - "the SDVO device with slave addr %2x is found on" > + "the SDVO device with client addr %2x is found on" > " %s port\n", > - child->slave_addr, > + child->client_addr, > (child->dvo_port == DEVICE_PORT_DVOB) ? > "SDVOB" : "SDVOC"); > mapping = &i915->display.vbt.sdvo_mappings[child->dvo_port - 1]; > if (!mapping->initialized) { > mapping->dvo_port = child->dvo_port; > - mapping->slave_addr = child->slave_addr; > + mapping->client_addr = child->client_addr; > mapping->dvo_wiring = child->dvo_wiring; > mapping->ddc_pin = child->ddc_pin; > mapping->i2c_pin = child->i2c_pin; > mapping->initialized = 1; > drm_dbg_kms(&i915->drm, > "SDVO device: dvo=%x, addr=%x, wiring=%d, ddc_pin=%d, i2c_pin=%d\n", > - mapping->dvo_port, mapping->slave_addr, > + mapping->dvo_port, mapping->client_addr, > mapping->dvo_wiring, mapping->ddc_pin, > mapping->i2c_pin); > } else { > @@ -1270,11 +1270,11 @@ parse_sdvo_device_mapping(struct drm_i915_private *i915) > "Maybe one SDVO port is shared by " > "two SDVO device.\n"); > } > - if (child->slave2_addr) { > + if (child->client2_addr) { > /* Maybe this is a SDVO device with multiple inputs */ > /* And the mapping info is not added */ > drm_dbg_kms(&i915->drm, > - "there exists the slave2_addr. Maybe this" > + "there exists the client2_addr. Maybe this" > " is a SDVO device with multiple inputs.\n"); > } > count++; > diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c > index c587a8efeafc..c408daee412a 100644 > --- a/drivers/gpu/drm/i915/display/intel_ddi.c > +++ b/drivers/gpu/drm/i915/display/intel_ddi.c > @@ -4327,7 +4327,7 @@ static int intel_ddi_compute_config_late(struct intel_encoder *encoder, > connector->tile_group->id); > > /* > - * EDP Transcoders cannot be ensalved > + * EDP Transcoders cannot be slaves > * make them a master always when present > */ > if (port_sync_transcoders & BIT(TRANSCODER_EDP)) > diff --git a/drivers/gpu/drm/i915/display/intel_display_core.h b/drivers/gpu/drm/i915/display/intel_display_core.h > index 2167dbee5eea..663be73536e7 100644 > --- a/drivers/gpu/drm/i915/display/intel_display_core.h > +++ b/drivers/gpu/drm/i915/display/intel_display_core.h > @@ -236,7 +236,7 @@ struct intel_vbt_data { > struct sdvo_device_mapping { > u8 initialized; > u8 dvo_port; > - u8 slave_addr; > + u8 client_addr; > u8 dvo_wiring; > u8 i2c_pin; > u8 ddc_pin; > diff --git a/drivers/gpu/drm/i915/display/intel_dsi.h b/drivers/gpu/drm/i915/display/intel_dsi.h > index e99c94edfaae..d1031fe69e76 100644 > --- a/drivers/gpu/drm/i915/display/intel_dsi.h > +++ b/drivers/gpu/drm/i915/display/intel_dsi.h > @@ -66,7 +66,7 @@ struct intel_dsi { > /* number of DSI lanes */ > unsigned int lane_count; > > - /* i2c bus associated with the slave device */ > + /* i2c bus associated with the client device */ > int i2c_bus_num; > > /* > diff --git a/drivers/gpu/drm/i915/display/intel_dsi_vbt.c b/drivers/gpu/drm/i915/display/intel_dsi_vbt.c > index a5d7fc8418c9..3335d4e31964 100644 > --- a/drivers/gpu/drm/i915/display/intel_dsi_vbt.c > +++ b/drivers/gpu/drm/i915/display/intel_dsi_vbt.c > @@ -56,7 +56,7 @@ > #define MIPI_PORT_SHIFT 3 > > struct i2c_adapter_lookup { > - u16 slave_addr; > + u16 client_addr; > struct intel_dsi *intel_dsi; > acpi_handle dev_handle; > }; > @@ -443,7 +443,7 @@ static int i2c_adapter_lookup(struct acpi_resource *ares, void *data) > if (!i2c_acpi_get_i2c_resource(ares, &sb)) > return 1; > > - if (lookup->slave_addr != sb->slave_address) > + if (lookup->client_addr != sb->slave_address) > return 1; > > status = acpi_get_handle(lookup->dev_handle, > @@ -460,12 +460,12 @@ static int i2c_adapter_lookup(struct acpi_resource *ares, void *data) > } > > static void i2c_acpi_find_adapter(struct intel_dsi *intel_dsi, > - const u16 slave_addr) > + const u16 client_addr) > { > struct drm_device *drm_dev = intel_dsi->base.base.dev; > struct acpi_device *adev = ACPI_COMPANION(drm_dev->dev); > struct i2c_adapter_lookup lookup = { > - .slave_addr = slave_addr, > + .client_addr = client_addr, > .intel_dsi = intel_dsi, > .dev_handle = acpi_device_handle(adev), > }; > @@ -476,7 +476,7 @@ static void i2c_acpi_find_adapter(struct intel_dsi *intel_dsi, > } > #else > static inline void i2c_acpi_find_adapter(struct intel_dsi *intel_dsi, > - const u16 slave_addr) > + const u16 client_addr) > { > } > #endif > @@ -488,17 +488,17 @@ static const u8 *mipi_exec_i2c(struct intel_dsi *intel_dsi, const u8 *data) > struct i2c_msg msg; > int ret; > u8 vbt_i2c_bus_num = *(data + 2); > - u16 slave_addr = *(u16 *)(data + 3); > + u16 client_addr = *(u16 *)(data + 3); > u8 reg_offset = *(data + 5); > u8 payload_size = *(data + 6); > u8 *payload_data; > > drm_dbg_kms(&i915->drm, "bus %d client-addr 0x%02x reg 0x%02x data %*ph\n", > - vbt_i2c_bus_num, slave_addr, reg_offset, payload_size, data + 7); > + vbt_i2c_bus_num, client_addr, reg_offset, payload_size, data + 7); > > if (intel_dsi->i2c_bus_num < 0) { > intel_dsi->i2c_bus_num = vbt_i2c_bus_num; > - i2c_acpi_find_adapter(intel_dsi, slave_addr); > + i2c_acpi_find_adapter(intel_dsi, client_addr); > } > > adapter = i2c_get_adapter(intel_dsi->i2c_bus_num); > @@ -514,7 +514,7 @@ static const u8 *mipi_exec_i2c(struct intel_dsi *intel_dsi, const u8 *data) > payload_data[0] = reg_offset; > memcpy(&payload_data[1], (data + 7), payload_size); > > - msg.addr = slave_addr; > + msg.addr = client_addr; > msg.flags = 0; > msg.len = payload_size + 1; > msg.buf = payload_data; > diff --git a/drivers/gpu/drm/i915/display/intel_dvo.c b/drivers/gpu/drm/i915/display/intel_dvo.c > index c076da75b066..7da2725149e4 100644 > --- a/drivers/gpu/drm/i915/display/intel_dvo.c > +++ b/drivers/gpu/drm/i915/display/intel_dvo.c > @@ -60,42 +60,42 @@ static const struct intel_dvo_device intel_dvo_devices[] = { > .type = INTEL_DVO_CHIP_TMDS, > .name = "sil164", > .port = PORT_C, > - .slave_addr = SIL164_ADDR, > + .client_addr = SIL164_ADDR, > .dev_ops = &sil164_ops, > }, > { > .type = INTEL_DVO_CHIP_TMDS, > .name = "ch7xxx", > .port = PORT_C, > - .slave_addr = CH7xxx_ADDR, > + .client_addr = CH7xxx_ADDR, > .dev_ops = &ch7xxx_ops, > }, > { > .type = INTEL_DVO_CHIP_TMDS, > .name = "ch7xxx", > .port = PORT_C, > - .slave_addr = 0x75, /* For some ch7010 */ > + .client_addr = 0x75, /* For some ch7010 */ > .dev_ops = &ch7xxx_ops, > }, > { > .type = INTEL_DVO_CHIP_LVDS, > .name = "ivch", > .port = PORT_A, > - .slave_addr = 0x02, /* Might also be 0x44, 0x84, 0xc4 */ > + .client_addr = 0x02, /* Might also be 0x44, 0x84, 0xc4 */ > .dev_ops = &ivch_ops, > }, > { > .type = INTEL_DVO_CHIP_TMDS, > .name = "tfp410", > .port = PORT_C, > - .slave_addr = TFP410_ADDR, > + .client_addr = TFP410_ADDR, > .dev_ops = &tfp410_ops, > }, > { > .type = INTEL_DVO_CHIP_LVDS, > .name = "ch7017", > .port = PORT_C, > - .slave_addr = 0x75, > + .client_addr = 0x75, > .gpio = GMBUS_PIN_DPB, > .dev_ops = &ch7017_ops, > }, > @@ -103,7 +103,7 @@ static const struct intel_dvo_device intel_dvo_devices[] = { > .type = INTEL_DVO_CHIP_LVDS_NO_FIXED, > .name = "ns2501", > .port = PORT_B, > - .slave_addr = NS2501_ADDR, > + .client_addr = NS2501_ADDR, > .dev_ops = &ns2501_ops, > }, > }; > diff --git a/drivers/gpu/drm/i915/display/intel_dvo_dev.h b/drivers/gpu/drm/i915/display/intel_dvo_dev.h > index af7b04539b93..042949ac8a16 100644 > --- a/drivers/gpu/drm/i915/display/intel_dvo_dev.h > +++ b/drivers/gpu/drm/i915/display/intel_dvo_dev.h > @@ -38,7 +38,7 @@ struct intel_dvo_device { > enum port port; > /* GPIO register used for i2c bus to control this device */ > u32 gpio; > - int slave_addr; > + int client_addr; > > const struct intel_dvo_dev_ops *dev_ops; > void *dev_priv; > diff --git a/drivers/gpu/drm/i915/display/intel_gmbus.c b/drivers/gpu/drm/i915/display/intel_gmbus.c > index d3e03ed5b79c..cbbdd84b4641 100644 > --- a/drivers/gpu/drm/i915/display/intel_gmbus.c > +++ b/drivers/gpu/drm/i915/display/intel_gmbus.c > @@ -478,7 +478,7 @@ gmbus_xfer_read_chunk(struct drm_i915_private *i915, > /* > * HW spec says that 512Bytes in Burst read need special treatment. > * But it doesn't talk about other multiple of 256Bytes. And couldn't locate > - * an I2C slave, which supports such a lengthy burst read too for experiments. > + * an I2C client, which supports such a lengthy burst read too for experiments. > * > * So until things get clarified on HW support, to avoid the burst read length > * in fold of 256Bytes except 512, max burst read length is fixed at 767Bytes. > @@ -701,7 +701,7 @@ do_gmbus_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs, int num, > > /* Toggle the Software Clear Interrupt bit. This has the effect > * of resetting the GMBUS controller and so clearing the > - * BUS_ERROR raised by the slave's NAK. > + * BUS_ERROR raised by the client's NAK. > */ > intel_de_write_fw(i915, GMBUS1(i915), GMBUS_SW_CLR_INT); > intel_de_write_fw(i915, GMBUS1(i915), 0); > diff --git a/drivers/gpu/drm/i915/display/intel_sdvo.c b/drivers/gpu/drm/i915/display/intel_sdvo.c > index 5f9e748adc89..126493c662c5 100644 > --- a/drivers/gpu/drm/i915/display/intel_sdvo.c > +++ b/drivers/gpu/drm/i915/display/intel_sdvo.c > @@ -95,7 +95,7 @@ struct intel_sdvo { > struct intel_encoder base; > > struct i2c_adapter *i2c; > - u8 slave_addr; > + u8 client_addr; > > struct intel_sdvo_ddc ddc[3]; > > @@ -255,13 +255,13 @@ static bool intel_sdvo_read_byte(struct intel_sdvo *intel_sdvo, u8 addr, u8 *ch) > struct drm_i915_private *i915 = to_i915(intel_sdvo->base.base.dev); > struct i2c_msg msgs[] = { > { > - .addr = intel_sdvo->slave_addr, > + .addr = intel_sdvo->client_addr, > .flags = 0, > .len = 1, > .buf = &addr, > }, > { > - .addr = intel_sdvo->slave_addr, > + .addr = intel_sdvo->client_addr, > .flags = I2C_M_RD, > .len = 1, > .buf = ch, > @@ -483,14 +483,14 @@ static bool __intel_sdvo_write_cmd(struct intel_sdvo *intel_sdvo, u8 cmd, > intel_sdvo_debug_write(intel_sdvo, cmd, args, args_len); > > for (i = 0; i < args_len; i++) { > - msgs[i].addr = intel_sdvo->slave_addr; > + msgs[i].addr = intel_sdvo->client_addr; > msgs[i].flags = 0; > msgs[i].len = 2; > msgs[i].buf = buf + 2 *i; > buf[2*i + 0] = SDVO_I2C_ARG_0 - i; > buf[2*i + 1] = ((u8*)args)[i]; > } > - msgs[i].addr = intel_sdvo->slave_addr; > + msgs[i].addr = intel_sdvo->client_addr; > msgs[i].flags = 0; > msgs[i].len = 2; > msgs[i].buf = buf + 2*i; > @@ -499,12 +499,12 @@ static bool __intel_sdvo_write_cmd(struct intel_sdvo *intel_sdvo, u8 cmd, > > /* the following two are to read the response */ > status = SDVO_I2C_CMD_STATUS; > - msgs[i+1].addr = intel_sdvo->slave_addr; > + msgs[i+1].addr = intel_sdvo->client_addr; > msgs[i+1].flags = 0; > msgs[i+1].len = 1; > msgs[i+1].buf = &status; > > - msgs[i+2].addr = intel_sdvo->slave_addr; > + msgs[i+2].addr = intel_sdvo->client_addr; > msgs[i+2].flags = I2C_M_RD; > msgs[i+2].len = 1; > msgs[i+2].buf = &status; > @@ -2659,9 +2659,9 @@ intel_sdvo_select_i2c_bus(struct intel_sdvo *sdvo) > else > pin = GMBUS_PIN_DPB; > > - drm_dbg_kms(&dev_priv->drm, "[ENCODER:%d:%s] I2C pin %d, slave addr 0x%x\n", > + drm_dbg_kms(&dev_priv->drm, "[ENCODER:%d:%s] I2C pin %d, client addr 0x%x\n", > sdvo->base.base.base.id, sdvo->base.base.name, > - pin, sdvo->slave_addr); > + pin, sdvo->client_addr); > > sdvo->i2c = intel_gmbus_get_adapter(dev_priv, pin); > > @@ -2687,7 +2687,7 @@ intel_sdvo_is_hdmi_connector(struct intel_sdvo *intel_sdvo) > } > > static u8 > -intel_sdvo_get_slave_addr(struct intel_sdvo *sdvo) > +intel_sdvo_get_client_addr(struct intel_sdvo *sdvo) > { > struct drm_i915_private *dev_priv = to_i915(sdvo->base.base.dev); > const struct sdvo_device_mapping *my_mapping, *other_mapping; > @@ -2701,15 +2701,15 @@ intel_sdvo_get_slave_addr(struct intel_sdvo *sdvo) > } > > /* If the BIOS described our SDVO device, take advantage of it. */ > - if (my_mapping->slave_addr) > - return my_mapping->slave_addr; > + if (my_mapping->client_addr) > + return my_mapping->client_addr; > > /* > * If the BIOS only described a different SDVO device, use the > * address that it isn't using. > */ > - if (other_mapping->slave_addr) { > - if (other_mapping->slave_addr == 0x70) > + if (other_mapping->client_addr) { > + if (other_mapping->client_addr == 0x70) > return 0x72; > else > return 0x70; > @@ -3412,7 +3412,7 @@ bool intel_sdvo_init(struct drm_i915_private *dev_priv, > "SDVO %c", port_name(port)); > > intel_sdvo->sdvo_reg = sdvo_reg; > - intel_sdvo->slave_addr = intel_sdvo_get_slave_addr(intel_sdvo) >> 1; > + intel_sdvo->client_addr = intel_sdvo_get_client_addr(intel_sdvo) >> 1; > > intel_sdvo_select_i2c_bus(intel_sdvo); > > diff --git a/drivers/gpu/drm/i915/display/intel_vbt_defs.h b/drivers/gpu/drm/i915/display/intel_vbt_defs.h > index a9f44abfc9fc..e268224355eb 100644 > --- a/drivers/gpu/drm/i915/display/intel_vbt_defs.h > +++ b/drivers/gpu/drm/i915/display/intel_vbt_defs.h > @@ -432,7 +432,7 @@ struct child_device_config { > u16 addin_offset; > u8 dvo_port; /* See DEVICE_PORT_* and DVO_PORT_* above */ > u8 i2c_pin; > - u8 slave_addr; > + u8 client_addr; > u8 ddc_pin; > u16 edid_ptr; > u8 dvo_cfg; /* See DEVICE_CFG_* above */ > @@ -441,7 +441,7 @@ struct child_device_config { > struct { > u8 dvo2_port; > u8 i2c2_pin; > - u8 slave2_addr; > + u8 client2_addr; > u8 ddc2_pin; > } __packed; > struct { > diff --git a/drivers/gpu/drm/i915/gvt/edid.c b/drivers/gpu/drm/i915/gvt/edid.c > index af9afdb53c7f..29380c774133 100644 > --- a/drivers/gpu/drm/i915/gvt/edid.c > +++ b/drivers/gpu/drm/i915/gvt/edid.c > @@ -42,8 +42,8 @@ > #define GMBUS1_TOTAL_BYTES_MASK 0x1ff > #define gmbus1_total_byte_count(v) (((v) >> \ > GMBUS1_TOTAL_BYTES_SHIFT) & GMBUS1_TOTAL_BYTES_MASK) > -#define gmbus1_slave_addr(v) (((v) & 0xff) >> 1) > -#define gmbus1_slave_index(v) (((v) >> 8) & 0xff) > +#define gmbus1_client_addr(v) (((v) & 0xff) >> 1) > +#define gmbus1_client_index(v) (((v) >> 8) & 0xff) > #define gmbus1_bus_cycle(v) (((v) >> 25) & 0x7) > > /* GMBUS0 bits definitions */ > @@ -54,7 +54,7 @@ static unsigned char edid_get_byte(struct intel_vgpu *vgpu) > struct intel_vgpu_i2c_edid *edid = &vgpu->display.i2c_edid; > unsigned char chr = 0; > > - if (edid->state == I2C_NOT_SPECIFIED || !edid->slave_selected) { > + if (edid->state == I2C_NOT_SPECIFIED || !edid->client_selected) { > gvt_vgpu_err("Driver tries to read EDID without proper sequence!\n"); > return 0; > } > @@ -179,7 +179,7 @@ static int gmbus1_mmio_write(struct intel_vgpu *vgpu, unsigned int offset, > void *p_data, unsigned int bytes) > { > struct intel_vgpu_i2c_edid *i2c_edid = &vgpu->display.i2c_edid; > - u32 slave_addr; > + u32 client_addr; > u32 wvalue = *(u32 *)p_data; > > if (vgpu_vreg(vgpu, offset) & GMBUS_SW_CLR_INT) { > @@ -210,21 +210,21 @@ static int gmbus1_mmio_write(struct intel_vgpu *vgpu, unsigned int offset, > > i2c_edid->gmbus.total_byte_count = > gmbus1_total_byte_count(wvalue); > - slave_addr = gmbus1_slave_addr(wvalue); > + client_addr = gmbus1_client_addr(wvalue); > > /* vgpu gmbus only support EDID */ > - if (slave_addr == EDID_ADDR) { > - i2c_edid->slave_selected = true; > - } else if (slave_addr != 0) { > + if (client_addr == EDID_ADDR) { > + i2c_edid->client_selected = true; > + } else if (client_addr != 0) { > gvt_dbg_dpy( > - "vgpu%d: unsupported gmbus slave addr(0x%x)\n" > + "vgpu%d: unsupported gmbus client addr(0x%x)\n" > " gmbus operations will be ignored.\n", > - vgpu->id, slave_addr); > + vgpu->id, client_addr); > } > > if (wvalue & GMBUS_CYCLE_INDEX) > i2c_edid->current_edid_read = > - gmbus1_slave_index(wvalue); > + gmbus1_client_index(wvalue); > > i2c_edid->gmbus.cycle_type = gmbus1_bus_cycle(wvalue); > switch (gmbus1_bus_cycle(wvalue)) { > @@ -523,7 +523,7 @@ void intel_gvt_i2c_handle_aux_ch_write(struct intel_vgpu *vgpu, > } else if (addr == EDID_ADDR) { > i2c_edid->state = I2C_AUX_CH; > i2c_edid->port = port_idx; > - i2c_edid->slave_selected = true; > + i2c_edid->client_selected = true; > if (intel_vgpu_has_monitor_on_port(vgpu, > port_idx) && > intel_vgpu_port_is_dp(vgpu, port_idx)) > @@ -542,7 +542,7 @@ void intel_gvt_i2c_handle_aux_ch_write(struct intel_vgpu *vgpu, > return; > if (drm_WARN_ON(&i915->drm, msg_length != 4)) > return; > - if (i2c_edid->edid_available && i2c_edid->slave_selected) { > + if (i2c_edid->edid_available && i2c_edid->client_selected) { > unsigned char val = edid_get_byte(vgpu); > > aux_data_for_write = (val << 16); > @@ -571,7 +571,7 @@ void intel_vgpu_init_i2c_edid(struct intel_vgpu *vgpu) > edid->state = I2C_NOT_SPECIFIED; > > edid->port = -1; > - edid->slave_selected = false; > + edid->client_selected = false; > edid->edid_available = false; > edid->current_edid_read = 0; > > diff --git a/drivers/gpu/drm/i915/gvt/edid.h b/drivers/gpu/drm/i915/gvt/edid.h > index dfe0cbc6aad8..c36f26c5f5cc 100644 > --- a/drivers/gpu/drm/i915/gvt/edid.h > +++ b/drivers/gpu/drm/i915/gvt/edid.h > @@ -80,7 +80,7 @@ enum gmbus_cycle_type { > * R/W Protect > * Command and Status. > * bit0 is the direction bit: 1 is read; 0 is write. > - * bit1 - bit7 is slave 7-bit address. > + * bit1 - bit7 is client 7-bit address. > * bit16 - bit24 total byte count (ignore?) > * > * GMBUS2: > @@ -130,7 +130,7 @@ struct intel_vgpu_i2c_edid { > enum i2c_state state; > > unsigned int port; > - bool slave_selected; > + bool client_selected; > bool edid_available; > unsigned int current_edid_read; > > diff --git a/drivers/gpu/drm/i915/gvt/opregion.c b/drivers/gpu/drm/i915/gvt/opregion.c > index d2bed466540a..88fa6877ec90 100644 > --- a/drivers/gpu/drm/i915/gvt/opregion.c > +++ b/drivers/gpu/drm/i915/gvt/opregion.c > @@ -86,7 +86,7 @@ struct efp_child_device_config { > u8 skip2; > u8 dvo_port; > u8 i2c_pin; /* for add-in card */ > - u8 slave_addr; /* for add-in card */ > + u8 client_addr; /* for add-in card */ > u8 ddc_pin; > u16 edid_ptr; > u8 dvo_config;
On 4/2/2024 12:48 AM, Jani Nikula wrote: > On Fri, 29 Mar 2024, Easwar Hariharan <eahariha@linux.microsoft.com> wrote: >> I2C v7, SMBus 3.2, and I3C specifications have replaced "master/slave" >> with more appropriate terms. Inspired by and following on to Wolfram's >> series to fix drivers/i2c/[1], fix the terminology for users of >> I2C_ALGOBIT bitbanging interface, now that the approved verbiage exists >> in the specification. > > gma500 and i915 changes should be split. See MAINTAINERS. > > Might also split the i915 changes to smaller pieces, it's kind of > random. And the changes here are not strictly related to I2C AFAICT, so > the commit message should be updated. > > BR, > Jani. > > <snip> I will split gma500 and i915 into their respective patches if possible in v2. Can you say more about the changes being "not strictly related to I2C"? My heuristic was to grep for master/slave, and look in the surrounding context for i2c-related terminology (i2c_pin, 7-bit address, struct i2c_adapter, i2c_bus, etc) to confirm that they are i2c-related, then following the references around to make the compiler happy. For e.g., I did not change the many references to bigjoiner master and slave because I understood from context they were not i2c references. A couple examples would help me restrict the changes to I2C, since as mentioned in the discussion on Wolfram's thread, there are places where migrating away from master/slave terms in the code would conflict with the original technical manuals and reduce correlation and understanding of the code. Thanks, Easwar
On Tue, 02 Apr 2024, Easwar Hariharan <eahariha@linux.microsoft.com> wrote: > On 4/2/2024 12:48 AM, Jani Nikula wrote: >> On Fri, 29 Mar 2024, Easwar Hariharan <eahariha@linux.microsoft.com> wrote: >>> I2C v7, SMBus 3.2, and I3C specifications have replaced "master/slave" >>> with more appropriate terms. Inspired by and following on to Wolfram's >>> series to fix drivers/i2c/[1], fix the terminology for users of >>> I2C_ALGOBIT bitbanging interface, now that the approved verbiage exists >>> in the specification. >> >> gma500 and i915 changes should be split. See MAINTAINERS. >> >> Might also split the i915 changes to smaller pieces, it's kind of >> random. And the changes here are not strictly related to I2C AFAICT, so >> the commit message should be updated. >> >> BR, >> Jani. >> >> > > <snip> > > I will split gma500 and i915 into their respective patches if possible in v2. > > Can you say more about the changes being "not strictly related to I2C"? My > heuristic was to grep for master/slave, and look in the surrounding context for > i2c-related terminology (i2c_pin, 7-bit address, struct i2c_adapter, i2c_bus, etc) > to confirm that they are i2c-related, then following the references around to > make the compiler happy. For e.g., I did not change the many references to bigjoiner > master and slave because I understood from context they were not i2c references. > > A couple examples would help me restrict the changes to I2C, since as mentioned in the > discussion on Wolfram's thread, there are places where migrating away from master/slave > terms in the code would conflict with the original technical manuals and reduce correlation > and understanding of the code. I guess I was looking at the VBT changes in intel_bios.c. Granted, they do end up being used as i2c addresses. No big deal. I think I'd expect the treewide i2c adapter changes to land first, via i2c, and subsequent cleanups to happen next, via individual driver trees. There's quite a bit of conflict potential merging this outside of drm-intel-next, and there's really no need for that. BR, Jani. > > Thanks, > Easwar >
On 4/2/2024 7:32 AM, Jani Nikula wrote: > On Tue, 02 Apr 2024, Easwar Hariharan <eahariha@linux.microsoft.com> wrote: >> On 4/2/2024 12:48 AM, Jani Nikula wrote: >>> On Fri, 29 Mar 2024, Easwar Hariharan <eahariha@linux.microsoft.com> wrote: >>>> I2C v7, SMBus 3.2, and I3C specifications have replaced "master/slave" >>>> with more appropriate terms. Inspired by and following on to Wolfram's >>>> series to fix drivers/i2c/[1], fix the terminology for users of >>>> I2C_ALGOBIT bitbanging interface, now that the approved verbiage exists >>>> in the specification. >>> >>> gma500 and i915 changes should be split. See MAINTAINERS. >>> >>> Might also split the i915 changes to smaller pieces, it's kind of >>> random. And the changes here are not strictly related to I2C AFAICT, so >>> the commit message should be updated. >>> >>> BR, >>> Jani. >>> >>> >> >> <snip> >> >> I will split gma500 and i915 into their respective patches if possible in v2. >> >> Can you say more about the changes being "not strictly related to I2C"? My >> heuristic was to grep for master/slave, and look in the surrounding context for >> i2c-related terminology (i2c_pin, 7-bit address, struct i2c_adapter, i2c_bus, etc) >> to confirm that they are i2c-related, then following the references around to >> make the compiler happy. For e.g., I did not change the many references to bigjoiner >> master and slave because I understood from context they were not i2c references. >> >> A couple examples would help me restrict the changes to I2C, since as mentioned in the >> discussion on Wolfram's thread, there are places where migrating away from master/slave >> terms in the code would conflict with the original technical manuals and reduce correlation >> and understanding of the code. > > I guess I was looking at the VBT changes in intel_bios.c. Granted, they > do end up being used as i2c addresses. No big deal. > > I think I'd expect the treewide i2c adapter changes to land first, via > i2c, and subsequent cleanups to happen next, via individual driver > trees. There's quite a bit of conflict potential merging this outside of > drm-intel-next, and there's really no need for that. > > BR, > Jani. > Great! Just so I'm clear, do you still want the i915 changes split up more, along with them being split off from gma500? Thanks, Easwar
On Tue, 02 Apr 2024, Easwar Hariharan <eahariha@linux.microsoft.com> wrote: > On 4/2/2024 7:32 AM, Jani Nikula wrote: >> On Tue, 02 Apr 2024, Easwar Hariharan <eahariha@linux.microsoft.com> wrote: >>> On 4/2/2024 12:48 AM, Jani Nikula wrote: >>>> On Fri, 29 Mar 2024, Easwar Hariharan <eahariha@linux.microsoft.com> wrote: >>>>> I2C v7, SMBus 3.2, and I3C specifications have replaced "master/slave" >>>>> with more appropriate terms. Inspired by and following on to Wolfram's >>>>> series to fix drivers/i2c/[1], fix the terminology for users of >>>>> I2C_ALGOBIT bitbanging interface, now that the approved verbiage exists >>>>> in the specification. >>>> >>>> gma500 and i915 changes should be split. See MAINTAINERS. >>>> >>>> Might also split the i915 changes to smaller pieces, it's kind of >>>> random. And the changes here are not strictly related to I2C AFAICT, so >>>> the commit message should be updated. >>>> >>>> BR, >>>> Jani. >>>> >>>> >>> >>> <snip> >>> >>> I will split gma500 and i915 into their respective patches if possible in v2. >>> >>> Can you say more about the changes being "not strictly related to I2C"? My >>> heuristic was to grep for master/slave, and look in the surrounding context for >>> i2c-related terminology (i2c_pin, 7-bit address, struct i2c_adapter, i2c_bus, etc) >>> to confirm that they are i2c-related, then following the references around to >>> make the compiler happy. For e.g., I did not change the many references to bigjoiner >>> master and slave because I understood from context they were not i2c references. >>> >>> A couple examples would help me restrict the changes to I2C, since as mentioned in the >>> discussion on Wolfram's thread, there are places where migrating away from master/slave >>> terms in the code would conflict with the original technical manuals and reduce correlation >>> and understanding of the code. >> >> I guess I was looking at the VBT changes in intel_bios.c. Granted, they >> do end up being used as i2c addresses. No big deal. >> >> I think I'd expect the treewide i2c adapter changes to land first, via >> i2c, and subsequent cleanups to happen next, via individual driver >> trees. There's quite a bit of conflict potential merging this outside of >> drm-intel-next, and there's really no need for that. >> >> BR, >> Jani. >> > > Great! Just so I'm clear, do you still want the i915 changes split up more, along with them being > split off from gma500? If we can merge the i915 changes via drm-intel-next, it's probably fine as a big i915 patch. Just the gma500 separated. (The struct i2c_algorithm change etc. necessarily has to go via I2C tree of course.) BR, Jani. > > Thanks, > Easwar
On 4/2/2024 9:52 AM, Jani Nikula wrote: > On Tue, 02 Apr 2024, Easwar Hariharan <eahariha@linux.microsoft.com> wrote: >> On 4/2/2024 7:32 AM, Jani Nikula wrote: >>> On Tue, 02 Apr 2024, Easwar Hariharan <eahariha@linux.microsoft.com> wrote: >>>> On 4/2/2024 12:48 AM, Jani Nikula wrote: >>>>> On Fri, 29 Mar 2024, Easwar Hariharan <eahariha@linux.microsoft.com> wrote: >>>>>> I2C v7, SMBus 3.2, and I3C specifications have replaced "master/slave" >>>>>> with more appropriate terms. Inspired by and following on to Wolfram's >>>>>> series to fix drivers/i2c/[1], fix the terminology for users of >>>>>> I2C_ALGOBIT bitbanging interface, now that the approved verbiage exists >>>>>> in the specification. >>>>> >>>>> gma500 and i915 changes should be split. See MAINTAINERS. >>>>> >>>>> Might also split the i915 changes to smaller pieces, it's kind of >>>>> random. And the changes here are not strictly related to I2C AFAICT, so >>>>> the commit message should be updated. >>>>> >>>>> BR, >>>>> Jani. >>>>> >>>>> >>>> >>>> <snip> >>>> >>>> I will split gma500 and i915 into their respective patches if possible in v2. >>>> >>>> Can you say more about the changes being "not strictly related to I2C"? My >>>> heuristic was to grep for master/slave, and look in the surrounding context for >>>> i2c-related terminology (i2c_pin, 7-bit address, struct i2c_adapter, i2c_bus, etc) >>>> to confirm that they are i2c-related, then following the references around to >>>> make the compiler happy. For e.g., I did not change the many references to bigjoiner >>>> master and slave because I understood from context they were not i2c references. >>>> >>>> A couple examples would help me restrict the changes to I2C, since as mentioned in the >>>> discussion on Wolfram's thread, there are places where migrating away from master/slave >>>> terms in the code would conflict with the original technical manuals and reduce correlation >>>> and understanding of the code. >>> >>> I guess I was looking at the VBT changes in intel_bios.c. Granted, they >>> do end up being used as i2c addresses. No big deal. >>> >>> I think I'd expect the treewide i2c adapter changes to land first, via >>> i2c, and subsequent cleanups to happen next, via individual driver >>> trees. There's quite a bit of conflict potential merging this outside of >>> drm-intel-next, and there's really no need for that. >>> >>> BR, >>> Jani. >>> >> >> Great! Just so I'm clear, do you still want the i915 changes split up more, along with them being >> split off from gma500? > > If we can merge the i915 changes via drm-intel-next, it's probably fine > as a big i915 patch. Just the gma500 separated. (The struct > i2c_algorithm change etc. necessarily has to go via I2C tree of course.) > > BR, > Jani. > Got it. I'll send the split out in v1 (not v2 as mentioned earlier) since this is v0. Thanks, Easwar
diff --git a/drivers/gpu/drm/gma500/cdv_intel_lvds.c b/drivers/gpu/drm/gma500/cdv_intel_lvds.c index f08a6803dc18..84c9122062c4 100644 --- a/drivers/gpu/drm/gma500/cdv_intel_lvds.c +++ b/drivers/gpu/drm/gma500/cdv_intel_lvds.c @@ -565,7 +565,7 @@ void cdv_intel_lvds_init(struct drm_device *dev, dev->dev, "I2C bus registration failed.\n"); goto err_encoder_cleanup; } - gma_encoder->i2c_bus->slave_addr = 0x2C; + gma_encoder->i2c_bus->client_addr = 0x2C; dev_priv->lvds_i2c_bus = gma_encoder->i2c_bus; /* diff --git a/drivers/gpu/drm/gma500/intel_bios.c b/drivers/gpu/drm/gma500/intel_bios.c index 8245b5603d2c..333bece1a64f 100644 --- a/drivers/gpu/drm/gma500/intel_bios.c +++ b/drivers/gpu/drm/gma500/intel_bios.c @@ -14,8 +14,8 @@ #include "psb_intel_drv.h" #include "psb_intel_reg.h" -#define SLAVE_ADDR1 0x70 -#define SLAVE_ADDR2 0x72 +#define CLIENT_ADDR1 0x70 +#define CLIENT_ADDR2 0x72 static void *find_section(struct bdb_header *bdb, int section_id) { @@ -357,10 +357,10 @@ parse_sdvo_device_mapping(struct drm_psb_private *dev_priv, /* skip the device block if device type is invalid */ continue; } - if (p_child->slave_addr != SLAVE_ADDR1 && - p_child->slave_addr != SLAVE_ADDR2) { + if (p_child->client_addr != CLIENT_ADDR1 && + p_child->client_addr != CLIENT_ADDR2) { /* - * If the slave address is neither 0x70 nor 0x72, + * If the client address is neither 0x70 nor 0x72, * it is not a SDVO device. Skip it. */ continue; @@ -371,22 +371,22 @@ parse_sdvo_device_mapping(struct drm_psb_private *dev_priv, DRM_DEBUG_KMS("Incorrect SDVO port. Skip it\n"); continue; } - DRM_DEBUG_KMS("the SDVO device with slave addr %2x is found on" + DRM_DEBUG_KMS("the SDVO device with client addr %2x is found on" " %s port\n", - p_child->slave_addr, + p_child->client_addr, (p_child->dvo_port == DEVICE_PORT_DVOB) ? "SDVOB" : "SDVOC"); p_mapping = &(dev_priv->sdvo_mappings[p_child->dvo_port - 1]); if (!p_mapping->initialized) { p_mapping->dvo_port = p_child->dvo_port; - p_mapping->slave_addr = p_child->slave_addr; + p_mapping->client_addr = p_child->client_addr; p_mapping->dvo_wiring = p_child->dvo_wiring; p_mapping->ddc_pin = p_child->ddc_pin; p_mapping->i2c_pin = p_child->i2c_pin; p_mapping->initialized = 1; DRM_DEBUG_KMS("SDVO device: dvo=%x, addr=%x, wiring=%d, ddc_pin=%d, i2c_pin=%d\n", p_mapping->dvo_port, - p_mapping->slave_addr, + p_mapping->client_addr, p_mapping->dvo_wiring, p_mapping->ddc_pin, p_mapping->i2c_pin); @@ -394,10 +394,10 @@ parse_sdvo_device_mapping(struct drm_psb_private *dev_priv, DRM_DEBUG_KMS("Maybe one SDVO port is shared by " "two SDVO device.\n"); } - if (p_child->slave2_addr) { + if (p_child->client2_addr) { /* Maybe this is a SDVO device with multiple inputs */ /* And the mapping info is not added */ - DRM_DEBUG_KMS("there exists the slave2_addr. Maybe this" + DRM_DEBUG_KMS("there exists the client2_addr. Maybe this" " is a SDVO device with multiple inputs.\n"); } count++; diff --git a/drivers/gpu/drm/gma500/intel_bios.h b/drivers/gpu/drm/gma500/intel_bios.h index 0e6facf21e33..cfca33427f94 100644 --- a/drivers/gpu/drm/gma500/intel_bios.h +++ b/drivers/gpu/drm/gma500/intel_bios.h @@ -186,13 +186,13 @@ struct child_device_config { u16 addin_offset; u8 dvo_port; /* See Device_PORT_* above */ u8 i2c_pin; - u8 slave_addr; + u8 client_addr; u8 ddc_pin; u16 edid_ptr; u8 dvo_cfg; /* See DEVICE_CFG_* above */ u8 dvo2_port; u8 i2c2_pin; - u8 slave2_addr; + u8 client2_addr; u8 ddc2_pin; u8 capabilities; u8 dvo_wiring;/* See DEVICE_WIRE_* above */ diff --git a/drivers/gpu/drm/gma500/intel_gmbus.c b/drivers/gpu/drm/gma500/intel_gmbus.c index aa45509859f2..94cf854b1d3d 100644 --- a/drivers/gpu/drm/gma500/intel_gmbus.c +++ b/drivers/gpu/drm/gma500/intel_gmbus.c @@ -333,7 +333,7 @@ gmbus_xfer(struct i2c_adapter *adapter, clear_err: /* Toggle the Software Clear Interrupt bit. This has the effect * of resetting the GMBUS controller and so clearing the - * BUS_ERROR raised by the slave's NAK. + * BUS_ERROR raised by the client's NAK. */ GMBUS_REG_WRITE(GMBUS1 + reg_offset, GMBUS_SW_CLR_INT); GMBUS_REG_WRITE(GMBUS1 + reg_offset, 0); diff --git a/drivers/gpu/drm/gma500/psb_drv.h b/drivers/gpu/drm/gma500/psb_drv.h index c5edfa4aa4cc..bbf3af1b01cd 100644 --- a/drivers/gpu/drm/gma500/psb_drv.h +++ b/drivers/gpu/drm/gma500/psb_drv.h @@ -203,7 +203,7 @@ struct psb_intel_opregion { struct sdvo_device_mapping { u8 initialized; u8 dvo_port; - u8 slave_addr; + u8 client_addr; u8 dvo_wiring; u8 i2c_pin; u8 i2c_speed; diff --git a/drivers/gpu/drm/gma500/psb_intel_drv.h b/drivers/gpu/drm/gma500/psb_intel_drv.h index c111e933e1ed..3536414c1988 100644 --- a/drivers/gpu/drm/gma500/psb_intel_drv.h +++ b/drivers/gpu/drm/gma500/psb_intel_drv.h @@ -80,7 +80,7 @@ struct psb_intel_mode_device { struct gma_i2c_chan { struct i2c_adapter base; struct i2c_algo_bit_data algo; - u8 slave_addr; + u8 client_addr; /* for getting at dev. private (mmio etc.) */ struct drm_device *drm_dev; diff --git a/drivers/gpu/drm/gma500/psb_intel_lvds.c b/drivers/gpu/drm/gma500/psb_intel_lvds.c index 8486de230ec9..3ce54aaf92ce 100644 --- a/drivers/gpu/drm/gma500/psb_intel_lvds.c +++ b/drivers/gpu/drm/gma500/psb_intel_lvds.c @@ -97,7 +97,7 @@ static int psb_lvds_i2c_set_brightness(struct drm_device *dev, struct i2c_msg msgs[] = { { - .addr = lvds_i2c_bus->slave_addr, + .addr = lvds_i2c_bus->client_addr, .flags = 0, .len = 2, .buf = out_buf, @@ -707,7 +707,7 @@ void psb_intel_lvds_init(struct drm_device *dev, dev->dev, "I2C bus registration failed.\n"); goto err_encoder_cleanup; } - lvds_priv->i2c_bus->slave_addr = 0x2C; + lvds_priv->i2c_bus->client_addr = 0x2C; dev_priv->lvds_i2c_bus = lvds_priv->i2c_bus; /* diff --git a/drivers/gpu/drm/gma500/psb_intel_sdvo.c b/drivers/gpu/drm/gma500/psb_intel_sdvo.c index e4f914deceba..39a3b696efc5 100644 --- a/drivers/gpu/drm/gma500/psb_intel_sdvo.c +++ b/drivers/gpu/drm/gma500/psb_intel_sdvo.c @@ -70,7 +70,7 @@ struct psb_intel_sdvo { struct gma_encoder base; struct i2c_adapter *i2c; - u8 slave_addr; + u8 client_addr; struct i2c_adapter ddc; @@ -259,13 +259,13 @@ static bool psb_intel_sdvo_read_byte(struct psb_intel_sdvo *psb_intel_sdvo, u8 a { struct i2c_msg msgs[] = { { - .addr = psb_intel_sdvo->slave_addr, + .addr = psb_intel_sdvo->client_addr, .flags = 0, .len = 1, .buf = &addr, }, { - .addr = psb_intel_sdvo->slave_addr, + .addr = psb_intel_sdvo->client_addr, .flags = I2C_M_RD, .len = 1, .buf = ch, @@ -463,14 +463,14 @@ static bool psb_intel_sdvo_write_cmd(struct psb_intel_sdvo *psb_intel_sdvo, u8 c psb_intel_sdvo_debug_write(psb_intel_sdvo, cmd, args, args_len); for (i = 0; i < args_len; i++) { - msgs[i].addr = psb_intel_sdvo->slave_addr; + msgs[i].addr = psb_intel_sdvo->client_addr; msgs[i].flags = 0; msgs[i].len = 2; msgs[i].buf = buf + 2 *i; buf[2*i + 0] = SDVO_I2C_ARG_0 - i; buf[2*i + 1] = ((u8*)args)[i]; } - msgs[i].addr = psb_intel_sdvo->slave_addr; + msgs[i].addr = psb_intel_sdvo->client_addr; msgs[i].flags = 0; msgs[i].len = 2; msgs[i].buf = buf + 2*i; @@ -479,12 +479,12 @@ static bool psb_intel_sdvo_write_cmd(struct psb_intel_sdvo *psb_intel_sdvo, u8 c /* the following two are to read the response */ status = SDVO_I2C_CMD_STATUS; - msgs[i+1].addr = psb_intel_sdvo->slave_addr; + msgs[i+1].addr = psb_intel_sdvo->client_addr; msgs[i+1].flags = 0; msgs[i+1].len = 1; msgs[i+1].buf = &status; - msgs[i+2].addr = psb_intel_sdvo->slave_addr; + msgs[i+2].addr = psb_intel_sdvo->client_addr; msgs[i+2].flags = I2C_M_RD; msgs[i+2].len = 1; msgs[i+2].buf = &status; @@ -1899,7 +1899,7 @@ psb_intel_sdvo_is_hdmi_connector(struct psb_intel_sdvo *psb_intel_sdvo, int devi } static u8 -psb_intel_sdvo_get_slave_addr(struct drm_device *dev, int sdvo_reg) +psb_intel_sdvo_get_client_addr(struct drm_device *dev, int sdvo_reg) { struct drm_psb_private *dev_priv = to_drm_psb_private(dev); struct sdvo_device_mapping *my_mapping, *other_mapping; @@ -1913,14 +1913,14 @@ psb_intel_sdvo_get_slave_addr(struct drm_device *dev, int sdvo_reg) } /* If the BIOS described our SDVO device, take advantage of it. */ - if (my_mapping->slave_addr) - return my_mapping->slave_addr; + if (my_mapping->client_addr) + return my_mapping->client_addr; /* If the BIOS only described a different SDVO device, use the * address that it isn't using. */ - if (other_mapping->slave_addr) { - if (other_mapping->slave_addr == 0x70) + if (other_mapping->client_addr) { + if (other_mapping->client_addr == 0x70) return 0x72; else return 0x70; @@ -2446,7 +2446,7 @@ bool psb_intel_sdvo_init(struct drm_device *dev, int sdvo_reg) return false; psb_intel_sdvo->sdvo_reg = sdvo_reg; - psb_intel_sdvo->slave_addr = psb_intel_sdvo_get_slave_addr(dev, sdvo_reg) >> 1; + psb_intel_sdvo->client_addr = psb_intel_sdvo_get_client_addr(dev, sdvo_reg) >> 1; psb_intel_sdvo_select_i2c_bus(dev_priv, psb_intel_sdvo, sdvo_reg); if (!psb_intel_sdvo_init_ddc_proxy(psb_intel_sdvo, dev)) { kfree(psb_intel_sdvo); diff --git a/drivers/gpu/drm/i915/display/dvo_ch7017.c b/drivers/gpu/drm/i915/display/dvo_ch7017.c index d0c3880d7f80..b9d04581b820 100644 --- a/drivers/gpu/drm/i915/display/dvo_ch7017.c +++ b/drivers/gpu/drm/i915/display/dvo_ch7017.c @@ -170,13 +170,13 @@ static bool ch7017_read(struct intel_dvo_device *dvo, u8 addr, u8 *val) { struct i2c_msg msgs[] = { { - .addr = dvo->slave_addr, + .addr = dvo->client_addr, .flags = 0, .len = 1, .buf = &addr, }, { - .addr = dvo->slave_addr, + .addr = dvo->client_addr, .flags = I2C_M_RD, .len = 1, .buf = val, @@ -189,7 +189,7 @@ static bool ch7017_write(struct intel_dvo_device *dvo, u8 addr, u8 val) { u8 buf[2] = { addr, val }; struct i2c_msg msg = { - .addr = dvo->slave_addr, + .addr = dvo->client_addr, .flags = 0, .len = 2, .buf = buf, @@ -197,7 +197,7 @@ static bool ch7017_write(struct intel_dvo_device *dvo, u8 addr, u8 val) return i2c_transfer(dvo->i2c_bus, &msg, 1) == 1; } -/** Probes for a CH7017 on the given bus and slave address. */ +/** Probes for a CH7017 on the given bus and client address. */ static bool ch7017_init(struct intel_dvo_device *dvo, struct i2c_adapter *adapter) { @@ -227,13 +227,13 @@ static bool ch7017_init(struct intel_dvo_device *dvo, break; default: DRM_DEBUG_KMS("ch701x not detected, got %d: from %s " - "slave %d.\n", - val, adapter->name, dvo->slave_addr); + "client %d.\n", + val, adapter->name, dvo->client_addr); goto fail; } DRM_DEBUG_KMS("%s detected on %s, addr %d\n", - str, adapter->name, dvo->slave_addr); + str, adapter->name, dvo->client_addr); return true; fail: diff --git a/drivers/gpu/drm/i915/display/dvo_ch7xxx.c b/drivers/gpu/drm/i915/display/dvo_ch7xxx.c index 2e8e85da5a40..8e36d6e2dde0 100644 --- a/drivers/gpu/drm/i915/display/dvo_ch7xxx.c +++ b/drivers/gpu/drm/i915/display/dvo_ch7xxx.c @@ -153,13 +153,13 @@ static bool ch7xxx_readb(struct intel_dvo_device *dvo, int addr, u8 *ch) struct i2c_msg msgs[] = { { - .addr = dvo->slave_addr, + .addr = dvo->client_addr, .flags = 0, .len = 1, .buf = out_buf, }, { - .addr = dvo->slave_addr, + .addr = dvo->client_addr, .flags = I2C_M_RD, .len = 1, .buf = in_buf, @@ -176,7 +176,7 @@ static bool ch7xxx_readb(struct intel_dvo_device *dvo, int addr, u8 *ch) if (!ch7xxx->quiet) { DRM_DEBUG_KMS("Unable to read register 0x%02x from %s:%02x.\n", - addr, adapter->name, dvo->slave_addr); + addr, adapter->name, dvo->client_addr); } return false; } @@ -188,7 +188,7 @@ static bool ch7xxx_writeb(struct intel_dvo_device *dvo, int addr, u8 ch) struct i2c_adapter *adapter = dvo->i2c_bus; u8 out_buf[2]; struct i2c_msg msg = { - .addr = dvo->slave_addr, + .addr = dvo->client_addr, .flags = 0, .len = 2, .buf = out_buf, @@ -202,7 +202,7 @@ static bool ch7xxx_writeb(struct intel_dvo_device *dvo, int addr, u8 ch) if (!ch7xxx->quiet) { DRM_DEBUG_KMS("Unable to write register 0x%02x to %s:%d.\n", - addr, adapter->name, dvo->slave_addr); + addr, adapter->name, dvo->client_addr); } return false; @@ -229,8 +229,8 @@ static bool ch7xxx_init(struct intel_dvo_device *dvo, name = ch7xxx_get_id(vendor); if (!name) { - DRM_DEBUG_KMS("ch7xxx not detected; got VID 0x%02x from %s slave %d.\n", - vendor, adapter->name, dvo->slave_addr); + DRM_DEBUG_KMS("ch7xxx not detected; got VID 0x%02x from %s client %d.\n", + vendor, adapter->name, dvo->client_addr); goto out; } @@ -240,8 +240,8 @@ static bool ch7xxx_init(struct intel_dvo_device *dvo, devid = ch7xxx_get_did(device); if (!devid) { - DRM_DEBUG_KMS("ch7xxx not detected; got DID 0x%02x from %s slave %d.\n", - device, adapter->name, dvo->slave_addr); + DRM_DEBUG_KMS("ch7xxx not detected; got DID 0x%02x from %s client %d.\n", + device, adapter->name, dvo->client_addr); goto out; } diff --git a/drivers/gpu/drm/i915/display/dvo_ivch.c b/drivers/gpu/drm/i915/display/dvo_ivch.c index eef72bb3b767..718bb17da2e3 100644 --- a/drivers/gpu/drm/i915/display/dvo_ivch.c +++ b/drivers/gpu/drm/i915/display/dvo_ivch.c @@ -198,7 +198,7 @@ static bool ivch_read(struct intel_dvo_device *dvo, int addr, u16 *data) struct i2c_msg msgs[] = { { - .addr = dvo->slave_addr, + .addr = dvo->client_addr, .flags = I2C_M_RD, .len = 0, }, @@ -209,7 +209,7 @@ static bool ivch_read(struct intel_dvo_device *dvo, int addr, u16 *data) .buf = out_buf, }, { - .addr = dvo->slave_addr, + .addr = dvo->client_addr, .flags = I2C_M_RD | I2C_M_NOSTART, .len = 2, .buf = in_buf, @@ -226,7 +226,7 @@ static bool ivch_read(struct intel_dvo_device *dvo, int addr, u16 *data) if (!priv->quiet) { DRM_DEBUG_KMS("Unable to read register 0x%02x from " "%s:%02x.\n", - addr, adapter->name, dvo->slave_addr); + addr, adapter->name, dvo->client_addr); } return false; } @@ -238,7 +238,7 @@ static bool ivch_write(struct intel_dvo_device *dvo, int addr, u16 data) struct i2c_adapter *adapter = dvo->i2c_bus; u8 out_buf[3]; struct i2c_msg msg = { - .addr = dvo->slave_addr, + .addr = dvo->client_addr, .flags = 0, .len = 3, .buf = out_buf, @@ -253,13 +253,13 @@ static bool ivch_write(struct intel_dvo_device *dvo, int addr, u16 data) if (!priv->quiet) { DRM_DEBUG_KMS("Unable to write register 0x%02x to %s:%d.\n", - addr, adapter->name, dvo->slave_addr); + addr, adapter->name, dvo->client_addr); } return false; } -/* Probes the given bus and slave address for an ivch */ +/* Probes the given bus and client address for an ivch */ static bool ivch_init(struct intel_dvo_device *dvo, struct i2c_adapter *adapter) { @@ -283,10 +283,10 @@ static bool ivch_init(struct intel_dvo_device *dvo, * very unique, check that the value in the base address field matches * the address it's responding on. */ - if ((temp & VR00_BASE_ADDRESS_MASK) != dvo->slave_addr) { + if ((temp & VR00_BASE_ADDRESS_MASK) != dvo->client_addr) { DRM_DEBUG_KMS("ivch detect failed due to address mismatch " "(%d vs %d)\n", - (temp & VR00_BASE_ADDRESS_MASK), dvo->slave_addr); + (temp & VR00_BASE_ADDRESS_MASK), dvo->client_addr); goto out; } diff --git a/drivers/gpu/drm/i915/display/dvo_ns2501.c b/drivers/gpu/drm/i915/display/dvo_ns2501.c index 1df212fb000e..b15875a832f5 100644 --- a/drivers/gpu/drm/i915/display/dvo_ns2501.c +++ b/drivers/gpu/drm/i915/display/dvo_ns2501.c @@ -399,13 +399,13 @@ static bool ns2501_readb(struct intel_dvo_device *dvo, int addr, u8 *ch) struct i2c_msg msgs[] = { { - .addr = dvo->slave_addr, + .addr = dvo->client_addr, .flags = 0, .len = 1, .buf = out_buf, }, { - .addr = dvo->slave_addr, + .addr = dvo->client_addr, .flags = I2C_M_RD, .len = 1, .buf = in_buf, @@ -423,7 +423,7 @@ static bool ns2501_readb(struct intel_dvo_device *dvo, int addr, u8 *ch) if (!ns->quiet) { DRM_DEBUG_KMS ("Unable to read register 0x%02x from %s:0x%02x.\n", addr, - adapter->name, dvo->slave_addr); + adapter->name, dvo->client_addr); } return false; @@ -442,7 +442,7 @@ static bool ns2501_writeb(struct intel_dvo_device *dvo, int addr, u8 ch) u8 out_buf[2]; struct i2c_msg msg = { - .addr = dvo->slave_addr, + .addr = dvo->client_addr, .flags = 0, .len = 2, .buf = out_buf, @@ -457,7 +457,7 @@ static bool ns2501_writeb(struct intel_dvo_device *dvo, int addr, u8 ch) if (!ns->quiet) { DRM_DEBUG_KMS("Unable to write register 0x%02x to %s:%d\n", - addr, adapter->name, dvo->slave_addr); + addr, adapter->name, dvo->client_addr); } return false; @@ -488,8 +488,8 @@ static bool ns2501_init(struct intel_dvo_device *dvo, goto out; if (ch != (NS2501_VID & 0xff)) { - DRM_DEBUG_KMS("ns2501 not detected got %d: from %s Slave %d.\n", - ch, adapter->name, dvo->slave_addr); + DRM_DEBUG_KMS("ns2501 not detected got %d: from %s Client %d.\n", + ch, adapter->name, dvo->client_addr); goto out; } @@ -497,8 +497,8 @@ static bool ns2501_init(struct intel_dvo_device *dvo, goto out; if (ch != (NS2501_DID & 0xff)) { - DRM_DEBUG_KMS("ns2501 not detected got %d: from %s Slave %d.\n", - ch, adapter->name, dvo->slave_addr); + DRM_DEBUG_KMS("ns2501 not detected got %d: from %s Client %d.\n", + ch, adapter->name, dvo->client_addr); goto out; } ns->quiet = false; diff --git a/drivers/gpu/drm/i915/display/dvo_sil164.c b/drivers/gpu/drm/i915/display/dvo_sil164.c index 6c461024c8e3..e9e4433ffa14 100644 --- a/drivers/gpu/drm/i915/display/dvo_sil164.c +++ b/drivers/gpu/drm/i915/display/dvo_sil164.c @@ -79,13 +79,13 @@ static bool sil164_readb(struct intel_dvo_device *dvo, int addr, u8 *ch) struct i2c_msg msgs[] = { { - .addr = dvo->slave_addr, + .addr = dvo->client_addr, .flags = 0, .len = 1, .buf = out_buf, }, { - .addr = dvo->slave_addr, + .addr = dvo->client_addr, .flags = I2C_M_RD, .len = 1, .buf = in_buf, @@ -102,7 +102,7 @@ static bool sil164_readb(struct intel_dvo_device *dvo, int addr, u8 *ch) if (!sil->quiet) { DRM_DEBUG_KMS("Unable to read register 0x%02x from %s:%02x.\n", - addr, adapter->name, dvo->slave_addr); + addr, adapter->name, dvo->client_addr); } return false; } @@ -113,7 +113,7 @@ static bool sil164_writeb(struct intel_dvo_device *dvo, int addr, u8 ch) struct i2c_adapter *adapter = dvo->i2c_bus; u8 out_buf[2]; struct i2c_msg msg = { - .addr = dvo->slave_addr, + .addr = dvo->client_addr, .flags = 0, .len = 2, .buf = out_buf, @@ -127,7 +127,7 @@ static bool sil164_writeb(struct intel_dvo_device *dvo, int addr, u8 ch) if (!sil->quiet) { DRM_DEBUG_KMS("Unable to write register 0x%02x to %s:%d.\n", - addr, adapter->name, dvo->slave_addr); + addr, adapter->name, dvo->client_addr); } return false; @@ -153,8 +153,8 @@ static bool sil164_init(struct intel_dvo_device *dvo, goto out; if (ch != (SIL164_VID & 0xff)) { - DRM_DEBUG_KMS("sil164 not detected got %d: from %s Slave %d.\n", - ch, adapter->name, dvo->slave_addr); + DRM_DEBUG_KMS("sil164 not detected got %d: from %s Client %d.\n", + ch, adapter->name, dvo->client_addr); goto out; } @@ -162,8 +162,8 @@ static bool sil164_init(struct intel_dvo_device *dvo, goto out; if (ch != (SIL164_DID & 0xff)) { - DRM_DEBUG_KMS("sil164 not detected got %d: from %s Slave %d.\n", - ch, adapter->name, dvo->slave_addr); + DRM_DEBUG_KMS("sil164 not detected got %d: from %s Client %d.\n", + ch, adapter->name, dvo->client_addr); goto out; } sil->quiet = false; diff --git a/drivers/gpu/drm/i915/display/dvo_tfp410.c b/drivers/gpu/drm/i915/display/dvo_tfp410.c index 0939e097f4f9..ef1385fc16e7 100644 --- a/drivers/gpu/drm/i915/display/dvo_tfp410.c +++ b/drivers/gpu/drm/i915/display/dvo_tfp410.c @@ -100,13 +100,13 @@ static bool tfp410_readb(struct intel_dvo_device *dvo, int addr, u8 *ch) struct i2c_msg msgs[] = { { - .addr = dvo->slave_addr, + .addr = dvo->client_addr, .flags = 0, .len = 1, .buf = out_buf, }, { - .addr = dvo->slave_addr, + .addr = dvo->client_addr, .flags = I2C_M_RD, .len = 1, .buf = in_buf, @@ -123,7 +123,7 @@ static bool tfp410_readb(struct intel_dvo_device *dvo, int addr, u8 *ch) if (!tfp->quiet) { DRM_DEBUG_KMS("Unable to read register 0x%02x from %s:%02x.\n", - addr, adapter->name, dvo->slave_addr); + addr, adapter->name, dvo->client_addr); } return false; } @@ -134,7 +134,7 @@ static bool tfp410_writeb(struct intel_dvo_device *dvo, int addr, u8 ch) struct i2c_adapter *adapter = dvo->i2c_bus; u8 out_buf[2]; struct i2c_msg msg = { - .addr = dvo->slave_addr, + .addr = dvo->client_addr, .flags = 0, .len = 2, .buf = out_buf, @@ -148,7 +148,7 @@ static bool tfp410_writeb(struct intel_dvo_device *dvo, int addr, u8 ch) if (!tfp->quiet) { DRM_DEBUG_KMS("Unable to write register 0x%02x to %s:%d.\n", - addr, adapter->name, dvo->slave_addr); + addr, adapter->name, dvo->client_addr); } return false; @@ -183,15 +183,15 @@ static bool tfp410_init(struct intel_dvo_device *dvo, if ((id = tfp410_getid(dvo, TFP410_VID_LO)) != TFP410_VID) { DRM_DEBUG_KMS("tfp410 not detected got VID %X: from %s " - "Slave %d.\n", - id, adapter->name, dvo->slave_addr); + "Client %d.\n", + id, adapter->name, dvo->client_addr); goto out; } if ((id = tfp410_getid(dvo, TFP410_DID_LO)) != TFP410_DID) { DRM_DEBUG_KMS("tfp410 not detected got DID %X: from %s " - "Slave %d.\n", - id, adapter->name, dvo->slave_addr); + "Client %d.\n", + id, adapter->name, dvo->client_addr); goto out; } tfp->quiet = false; diff --git a/drivers/gpu/drm/i915/display/intel_bios.c b/drivers/gpu/drm/i915/display/intel_bios.c index fe52c06271ef..dbeb3a89d004 100644 --- a/drivers/gpu/drm/i915/display/intel_bios.c +++ b/drivers/gpu/drm/i915/display/intel_bios.c @@ -69,8 +69,8 @@ struct intel_bios_encoder_data { struct list_head node; }; -#define SLAVE_ADDR1 0x70 -#define SLAVE_ADDR2 0x72 +#define CLIENT_ADDR1 0x70 +#define CLIENT_ADDR2 0x72 /* Get BDB block size given a pointer to Block ID. */ static u32 _get_blocksize(const u8 *block_base) @@ -1231,10 +1231,10 @@ parse_sdvo_device_mapping(struct drm_i915_private *i915) const struct child_device_config *child = &devdata->child; struct sdvo_device_mapping *mapping; - if (child->slave_addr != SLAVE_ADDR1 && - child->slave_addr != SLAVE_ADDR2) { + if (child->client_addr != CLIENT_ADDR1 && + child->client_addr != CLIENT_ADDR2) { /* - * If the slave address is neither 0x70 nor 0x72, + * If the client address is neither 0x70 nor 0x72, * it is not a SDVO device. Skip it. */ continue; @@ -1247,22 +1247,22 @@ parse_sdvo_device_mapping(struct drm_i915_private *i915) continue; } drm_dbg_kms(&i915->drm, - "the SDVO device with slave addr %2x is found on" + "the SDVO device with client addr %2x is found on" " %s port\n", - child->slave_addr, + child->client_addr, (child->dvo_port == DEVICE_PORT_DVOB) ? "SDVOB" : "SDVOC"); mapping = &i915->display.vbt.sdvo_mappings[child->dvo_port - 1]; if (!mapping->initialized) { mapping->dvo_port = child->dvo_port; - mapping->slave_addr = child->slave_addr; + mapping->client_addr = child->client_addr; mapping->dvo_wiring = child->dvo_wiring; mapping->ddc_pin = child->ddc_pin; mapping->i2c_pin = child->i2c_pin; mapping->initialized = 1; drm_dbg_kms(&i915->drm, "SDVO device: dvo=%x, addr=%x, wiring=%d, ddc_pin=%d, i2c_pin=%d\n", - mapping->dvo_port, mapping->slave_addr, + mapping->dvo_port, mapping->client_addr, mapping->dvo_wiring, mapping->ddc_pin, mapping->i2c_pin); } else { @@ -1270,11 +1270,11 @@ parse_sdvo_device_mapping(struct drm_i915_private *i915) "Maybe one SDVO port is shared by " "two SDVO device.\n"); } - if (child->slave2_addr) { + if (child->client2_addr) { /* Maybe this is a SDVO device with multiple inputs */ /* And the mapping info is not added */ drm_dbg_kms(&i915->drm, - "there exists the slave2_addr. Maybe this" + "there exists the client2_addr. Maybe this" " is a SDVO device with multiple inputs.\n"); } count++; diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c index c587a8efeafc..c408daee412a 100644 --- a/drivers/gpu/drm/i915/display/intel_ddi.c +++ b/drivers/gpu/drm/i915/display/intel_ddi.c @@ -4327,7 +4327,7 @@ static int intel_ddi_compute_config_late(struct intel_encoder *encoder, connector->tile_group->id); /* - * EDP Transcoders cannot be ensalved + * EDP Transcoders cannot be slaves * make them a master always when present */ if (port_sync_transcoders & BIT(TRANSCODER_EDP)) diff --git a/drivers/gpu/drm/i915/display/intel_display_core.h b/drivers/gpu/drm/i915/display/intel_display_core.h index 2167dbee5eea..663be73536e7 100644 --- a/drivers/gpu/drm/i915/display/intel_display_core.h +++ b/drivers/gpu/drm/i915/display/intel_display_core.h @@ -236,7 +236,7 @@ struct intel_vbt_data { struct sdvo_device_mapping { u8 initialized; u8 dvo_port; - u8 slave_addr; + u8 client_addr; u8 dvo_wiring; u8 i2c_pin; u8 ddc_pin; diff --git a/drivers/gpu/drm/i915/display/intel_dsi.h b/drivers/gpu/drm/i915/display/intel_dsi.h index e99c94edfaae..d1031fe69e76 100644 --- a/drivers/gpu/drm/i915/display/intel_dsi.h +++ b/drivers/gpu/drm/i915/display/intel_dsi.h @@ -66,7 +66,7 @@ struct intel_dsi { /* number of DSI lanes */ unsigned int lane_count; - /* i2c bus associated with the slave device */ + /* i2c bus associated with the client device */ int i2c_bus_num; /* diff --git a/drivers/gpu/drm/i915/display/intel_dsi_vbt.c b/drivers/gpu/drm/i915/display/intel_dsi_vbt.c index a5d7fc8418c9..3335d4e31964 100644 --- a/drivers/gpu/drm/i915/display/intel_dsi_vbt.c +++ b/drivers/gpu/drm/i915/display/intel_dsi_vbt.c @@ -56,7 +56,7 @@ #define MIPI_PORT_SHIFT 3 struct i2c_adapter_lookup { - u16 slave_addr; + u16 client_addr; struct intel_dsi *intel_dsi; acpi_handle dev_handle; }; @@ -443,7 +443,7 @@ static int i2c_adapter_lookup(struct acpi_resource *ares, void *data) if (!i2c_acpi_get_i2c_resource(ares, &sb)) return 1; - if (lookup->slave_addr != sb->slave_address) + if (lookup->client_addr != sb->slave_address) return 1; status = acpi_get_handle(lookup->dev_handle, @@ -460,12 +460,12 @@ static int i2c_adapter_lookup(struct acpi_resource *ares, void *data) } static void i2c_acpi_find_adapter(struct intel_dsi *intel_dsi, - const u16 slave_addr) + const u16 client_addr) { struct drm_device *drm_dev = intel_dsi->base.base.dev; struct acpi_device *adev = ACPI_COMPANION(drm_dev->dev); struct i2c_adapter_lookup lookup = { - .slave_addr = slave_addr, + .client_addr = client_addr, .intel_dsi = intel_dsi, .dev_handle = acpi_device_handle(adev), }; @@ -476,7 +476,7 @@ static void i2c_acpi_find_adapter(struct intel_dsi *intel_dsi, } #else static inline void i2c_acpi_find_adapter(struct intel_dsi *intel_dsi, - const u16 slave_addr) + const u16 client_addr) { } #endif @@ -488,17 +488,17 @@ static const u8 *mipi_exec_i2c(struct intel_dsi *intel_dsi, const u8 *data) struct i2c_msg msg; int ret; u8 vbt_i2c_bus_num = *(data + 2); - u16 slave_addr = *(u16 *)(data + 3); + u16 client_addr = *(u16 *)(data + 3); u8 reg_offset = *(data + 5); u8 payload_size = *(data + 6); u8 *payload_data; drm_dbg_kms(&i915->drm, "bus %d client-addr 0x%02x reg 0x%02x data %*ph\n", - vbt_i2c_bus_num, slave_addr, reg_offset, payload_size, data + 7); + vbt_i2c_bus_num, client_addr, reg_offset, payload_size, data + 7); if (intel_dsi->i2c_bus_num < 0) { intel_dsi->i2c_bus_num = vbt_i2c_bus_num; - i2c_acpi_find_adapter(intel_dsi, slave_addr); + i2c_acpi_find_adapter(intel_dsi, client_addr); } adapter = i2c_get_adapter(intel_dsi->i2c_bus_num); @@ -514,7 +514,7 @@ static const u8 *mipi_exec_i2c(struct intel_dsi *intel_dsi, const u8 *data) payload_data[0] = reg_offset; memcpy(&payload_data[1], (data + 7), payload_size); - msg.addr = slave_addr; + msg.addr = client_addr; msg.flags = 0; msg.len = payload_size + 1; msg.buf = payload_data; diff --git a/drivers/gpu/drm/i915/display/intel_dvo.c b/drivers/gpu/drm/i915/display/intel_dvo.c index c076da75b066..7da2725149e4 100644 --- a/drivers/gpu/drm/i915/display/intel_dvo.c +++ b/drivers/gpu/drm/i915/display/intel_dvo.c @@ -60,42 +60,42 @@ static const struct intel_dvo_device intel_dvo_devices[] = { .type = INTEL_DVO_CHIP_TMDS, .name = "sil164", .port = PORT_C, - .slave_addr = SIL164_ADDR, + .client_addr = SIL164_ADDR, .dev_ops = &sil164_ops, }, { .type = INTEL_DVO_CHIP_TMDS, .name = "ch7xxx", .port = PORT_C, - .slave_addr = CH7xxx_ADDR, + .client_addr = CH7xxx_ADDR, .dev_ops = &ch7xxx_ops, }, { .type = INTEL_DVO_CHIP_TMDS, .name = "ch7xxx", .port = PORT_C, - .slave_addr = 0x75, /* For some ch7010 */ + .client_addr = 0x75, /* For some ch7010 */ .dev_ops = &ch7xxx_ops, }, { .type = INTEL_DVO_CHIP_LVDS, .name = "ivch", .port = PORT_A, - .slave_addr = 0x02, /* Might also be 0x44, 0x84, 0xc4 */ + .client_addr = 0x02, /* Might also be 0x44, 0x84, 0xc4 */ .dev_ops = &ivch_ops, }, { .type = INTEL_DVO_CHIP_TMDS, .name = "tfp410", .port = PORT_C, - .slave_addr = TFP410_ADDR, + .client_addr = TFP410_ADDR, .dev_ops = &tfp410_ops, }, { .type = INTEL_DVO_CHIP_LVDS, .name = "ch7017", .port = PORT_C, - .slave_addr = 0x75, + .client_addr = 0x75, .gpio = GMBUS_PIN_DPB, .dev_ops = &ch7017_ops, }, @@ -103,7 +103,7 @@ static const struct intel_dvo_device intel_dvo_devices[] = { .type = INTEL_DVO_CHIP_LVDS_NO_FIXED, .name = "ns2501", .port = PORT_B, - .slave_addr = NS2501_ADDR, + .client_addr = NS2501_ADDR, .dev_ops = &ns2501_ops, }, }; diff --git a/drivers/gpu/drm/i915/display/intel_dvo_dev.h b/drivers/gpu/drm/i915/display/intel_dvo_dev.h index af7b04539b93..042949ac8a16 100644 --- a/drivers/gpu/drm/i915/display/intel_dvo_dev.h +++ b/drivers/gpu/drm/i915/display/intel_dvo_dev.h @@ -38,7 +38,7 @@ struct intel_dvo_device { enum port port; /* GPIO register used for i2c bus to control this device */ u32 gpio; - int slave_addr; + int client_addr; const struct intel_dvo_dev_ops *dev_ops; void *dev_priv; diff --git a/drivers/gpu/drm/i915/display/intel_gmbus.c b/drivers/gpu/drm/i915/display/intel_gmbus.c index d3e03ed5b79c..cbbdd84b4641 100644 --- a/drivers/gpu/drm/i915/display/intel_gmbus.c +++ b/drivers/gpu/drm/i915/display/intel_gmbus.c @@ -478,7 +478,7 @@ gmbus_xfer_read_chunk(struct drm_i915_private *i915, /* * HW spec says that 512Bytes in Burst read need special treatment. * But it doesn't talk about other multiple of 256Bytes. And couldn't locate - * an I2C slave, which supports such a lengthy burst read too for experiments. + * an I2C client, which supports such a lengthy burst read too for experiments. * * So until things get clarified on HW support, to avoid the burst read length * in fold of 256Bytes except 512, max burst read length is fixed at 767Bytes. @@ -701,7 +701,7 @@ do_gmbus_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs, int num, /* Toggle the Software Clear Interrupt bit. This has the effect * of resetting the GMBUS controller and so clearing the - * BUS_ERROR raised by the slave's NAK. + * BUS_ERROR raised by the client's NAK. */ intel_de_write_fw(i915, GMBUS1(i915), GMBUS_SW_CLR_INT); intel_de_write_fw(i915, GMBUS1(i915), 0); diff --git a/drivers/gpu/drm/i915/display/intel_sdvo.c b/drivers/gpu/drm/i915/display/intel_sdvo.c index 5f9e748adc89..126493c662c5 100644 --- a/drivers/gpu/drm/i915/display/intel_sdvo.c +++ b/drivers/gpu/drm/i915/display/intel_sdvo.c @@ -95,7 +95,7 @@ struct intel_sdvo { struct intel_encoder base; struct i2c_adapter *i2c; - u8 slave_addr; + u8 client_addr; struct intel_sdvo_ddc ddc[3]; @@ -255,13 +255,13 @@ static bool intel_sdvo_read_byte(struct intel_sdvo *intel_sdvo, u8 addr, u8 *ch) struct drm_i915_private *i915 = to_i915(intel_sdvo->base.base.dev); struct i2c_msg msgs[] = { { - .addr = intel_sdvo->slave_addr, + .addr = intel_sdvo->client_addr, .flags = 0, .len = 1, .buf = &addr, }, { - .addr = intel_sdvo->slave_addr, + .addr = intel_sdvo->client_addr, .flags = I2C_M_RD, .len = 1, .buf = ch, @@ -483,14 +483,14 @@ static bool __intel_sdvo_write_cmd(struct intel_sdvo *intel_sdvo, u8 cmd, intel_sdvo_debug_write(intel_sdvo, cmd, args, args_len); for (i = 0; i < args_len; i++) { - msgs[i].addr = intel_sdvo->slave_addr; + msgs[i].addr = intel_sdvo->client_addr; msgs[i].flags = 0; msgs[i].len = 2; msgs[i].buf = buf + 2 *i; buf[2*i + 0] = SDVO_I2C_ARG_0 - i; buf[2*i + 1] = ((u8*)args)[i]; } - msgs[i].addr = intel_sdvo->slave_addr; + msgs[i].addr = intel_sdvo->client_addr; msgs[i].flags = 0; msgs[i].len = 2; msgs[i].buf = buf + 2*i; @@ -499,12 +499,12 @@ static bool __intel_sdvo_write_cmd(struct intel_sdvo *intel_sdvo, u8 cmd, /* the following two are to read the response */ status = SDVO_I2C_CMD_STATUS; - msgs[i+1].addr = intel_sdvo->slave_addr; + msgs[i+1].addr = intel_sdvo->client_addr; msgs[i+1].flags = 0; msgs[i+1].len = 1; msgs[i+1].buf = &status; - msgs[i+2].addr = intel_sdvo->slave_addr; + msgs[i+2].addr = intel_sdvo->client_addr; msgs[i+2].flags = I2C_M_RD; msgs[i+2].len = 1; msgs[i+2].buf = &status; @@ -2659,9 +2659,9 @@ intel_sdvo_select_i2c_bus(struct intel_sdvo *sdvo) else pin = GMBUS_PIN_DPB; - drm_dbg_kms(&dev_priv->drm, "[ENCODER:%d:%s] I2C pin %d, slave addr 0x%x\n", + drm_dbg_kms(&dev_priv->drm, "[ENCODER:%d:%s] I2C pin %d, client addr 0x%x\n", sdvo->base.base.base.id, sdvo->base.base.name, - pin, sdvo->slave_addr); + pin, sdvo->client_addr); sdvo->i2c = intel_gmbus_get_adapter(dev_priv, pin); @@ -2687,7 +2687,7 @@ intel_sdvo_is_hdmi_connector(struct intel_sdvo *intel_sdvo) } static u8 -intel_sdvo_get_slave_addr(struct intel_sdvo *sdvo) +intel_sdvo_get_client_addr(struct intel_sdvo *sdvo) { struct drm_i915_private *dev_priv = to_i915(sdvo->base.base.dev); const struct sdvo_device_mapping *my_mapping, *other_mapping; @@ -2701,15 +2701,15 @@ intel_sdvo_get_slave_addr(struct intel_sdvo *sdvo) } /* If the BIOS described our SDVO device, take advantage of it. */ - if (my_mapping->slave_addr) - return my_mapping->slave_addr; + if (my_mapping->client_addr) + return my_mapping->client_addr; /* * If the BIOS only described a different SDVO device, use the * address that it isn't using. */ - if (other_mapping->slave_addr) { - if (other_mapping->slave_addr == 0x70) + if (other_mapping->client_addr) { + if (other_mapping->client_addr == 0x70) return 0x72; else return 0x70; @@ -3412,7 +3412,7 @@ bool intel_sdvo_init(struct drm_i915_private *dev_priv, "SDVO %c", port_name(port)); intel_sdvo->sdvo_reg = sdvo_reg; - intel_sdvo->slave_addr = intel_sdvo_get_slave_addr(intel_sdvo) >> 1; + intel_sdvo->client_addr = intel_sdvo_get_client_addr(intel_sdvo) >> 1; intel_sdvo_select_i2c_bus(intel_sdvo); diff --git a/drivers/gpu/drm/i915/display/intel_vbt_defs.h b/drivers/gpu/drm/i915/display/intel_vbt_defs.h index a9f44abfc9fc..e268224355eb 100644 --- a/drivers/gpu/drm/i915/display/intel_vbt_defs.h +++ b/drivers/gpu/drm/i915/display/intel_vbt_defs.h @@ -432,7 +432,7 @@ struct child_device_config { u16 addin_offset; u8 dvo_port; /* See DEVICE_PORT_* and DVO_PORT_* above */ u8 i2c_pin; - u8 slave_addr; + u8 client_addr; u8 ddc_pin; u16 edid_ptr; u8 dvo_cfg; /* See DEVICE_CFG_* above */ @@ -441,7 +441,7 @@ struct child_device_config { struct { u8 dvo2_port; u8 i2c2_pin; - u8 slave2_addr; + u8 client2_addr; u8 ddc2_pin; } __packed; struct { diff --git a/drivers/gpu/drm/i915/gvt/edid.c b/drivers/gpu/drm/i915/gvt/edid.c index af9afdb53c7f..29380c774133 100644 --- a/drivers/gpu/drm/i915/gvt/edid.c +++ b/drivers/gpu/drm/i915/gvt/edid.c @@ -42,8 +42,8 @@ #define GMBUS1_TOTAL_BYTES_MASK 0x1ff #define gmbus1_total_byte_count(v) (((v) >> \ GMBUS1_TOTAL_BYTES_SHIFT) & GMBUS1_TOTAL_BYTES_MASK) -#define gmbus1_slave_addr(v) (((v) & 0xff) >> 1) -#define gmbus1_slave_index(v) (((v) >> 8) & 0xff) +#define gmbus1_client_addr(v) (((v) & 0xff) >> 1) +#define gmbus1_client_index(v) (((v) >> 8) & 0xff) #define gmbus1_bus_cycle(v) (((v) >> 25) & 0x7) /* GMBUS0 bits definitions */ @@ -54,7 +54,7 @@ static unsigned char edid_get_byte(struct intel_vgpu *vgpu) struct intel_vgpu_i2c_edid *edid = &vgpu->display.i2c_edid; unsigned char chr = 0; - if (edid->state == I2C_NOT_SPECIFIED || !edid->slave_selected) { + if (edid->state == I2C_NOT_SPECIFIED || !edid->client_selected) { gvt_vgpu_err("Driver tries to read EDID without proper sequence!\n"); return 0; } @@ -179,7 +179,7 @@ static int gmbus1_mmio_write(struct intel_vgpu *vgpu, unsigned int offset, void *p_data, unsigned int bytes) { struct intel_vgpu_i2c_edid *i2c_edid = &vgpu->display.i2c_edid; - u32 slave_addr; + u32 client_addr; u32 wvalue = *(u32 *)p_data; if (vgpu_vreg(vgpu, offset) & GMBUS_SW_CLR_INT) { @@ -210,21 +210,21 @@ static int gmbus1_mmio_write(struct intel_vgpu *vgpu, unsigned int offset, i2c_edid->gmbus.total_byte_count = gmbus1_total_byte_count(wvalue); - slave_addr = gmbus1_slave_addr(wvalue); + client_addr = gmbus1_client_addr(wvalue); /* vgpu gmbus only support EDID */ - if (slave_addr == EDID_ADDR) { - i2c_edid->slave_selected = true; - } else if (slave_addr != 0) { + if (client_addr == EDID_ADDR) { + i2c_edid->client_selected = true; + } else if (client_addr != 0) { gvt_dbg_dpy( - "vgpu%d: unsupported gmbus slave addr(0x%x)\n" + "vgpu%d: unsupported gmbus client addr(0x%x)\n" " gmbus operations will be ignored.\n", - vgpu->id, slave_addr); + vgpu->id, client_addr); } if (wvalue & GMBUS_CYCLE_INDEX) i2c_edid->current_edid_read = - gmbus1_slave_index(wvalue); + gmbus1_client_index(wvalue); i2c_edid->gmbus.cycle_type = gmbus1_bus_cycle(wvalue); switch (gmbus1_bus_cycle(wvalue)) { @@ -523,7 +523,7 @@ void intel_gvt_i2c_handle_aux_ch_write(struct intel_vgpu *vgpu, } else if (addr == EDID_ADDR) { i2c_edid->state = I2C_AUX_CH; i2c_edid->port = port_idx; - i2c_edid->slave_selected = true; + i2c_edid->client_selected = true; if (intel_vgpu_has_monitor_on_port(vgpu, port_idx) && intel_vgpu_port_is_dp(vgpu, port_idx)) @@ -542,7 +542,7 @@ void intel_gvt_i2c_handle_aux_ch_write(struct intel_vgpu *vgpu, return; if (drm_WARN_ON(&i915->drm, msg_length != 4)) return; - if (i2c_edid->edid_available && i2c_edid->slave_selected) { + if (i2c_edid->edid_available && i2c_edid->client_selected) { unsigned char val = edid_get_byte(vgpu); aux_data_for_write = (val << 16); @@ -571,7 +571,7 @@ void intel_vgpu_init_i2c_edid(struct intel_vgpu *vgpu) edid->state = I2C_NOT_SPECIFIED; edid->port = -1; - edid->slave_selected = false; + edid->client_selected = false; edid->edid_available = false; edid->current_edid_read = 0; diff --git a/drivers/gpu/drm/i915/gvt/edid.h b/drivers/gpu/drm/i915/gvt/edid.h index dfe0cbc6aad8..c36f26c5f5cc 100644 --- a/drivers/gpu/drm/i915/gvt/edid.h +++ b/drivers/gpu/drm/i915/gvt/edid.h @@ -80,7 +80,7 @@ enum gmbus_cycle_type { * R/W Protect * Command and Status. * bit0 is the direction bit: 1 is read; 0 is write. - * bit1 - bit7 is slave 7-bit address. + * bit1 - bit7 is client 7-bit address. * bit16 - bit24 total byte count (ignore?) * * GMBUS2: @@ -130,7 +130,7 @@ struct intel_vgpu_i2c_edid { enum i2c_state state; unsigned int port; - bool slave_selected; + bool client_selected; bool edid_available; unsigned int current_edid_read; diff --git a/drivers/gpu/drm/i915/gvt/opregion.c b/drivers/gpu/drm/i915/gvt/opregion.c index d2bed466540a..88fa6877ec90 100644 --- a/drivers/gpu/drm/i915/gvt/opregion.c +++ b/drivers/gpu/drm/i915/gvt/opregion.c @@ -86,7 +86,7 @@ struct efp_child_device_config { u8 skip2; u8 dvo_port; u8 i2c_pin; /* for add-in card */ - u8 slave_addr; /* for add-in card */ + u8 client_addr; /* for add-in card */ u8 ddc_pin; u16 edid_ptr; u8 dvo_config;
I2C v7, SMBus 3.2, and I3C specifications have replaced "master/slave" with more appropriate terms. Inspired by and following on to Wolfram's series to fix drivers/i2c/[1], fix the terminology for users of I2C_ALGOBIT bitbanging interface, now that the approved verbiage exists in the specification. Compile tested, no functionality changes intended [1]: https://lore.kernel.org/all/20240322132619.6389-1-wsa+renesas@sang-engineering.com/ Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com> --- drivers/gpu/drm/gma500/cdv_intel_lvds.c | 2 +- drivers/gpu/drm/gma500/intel_bios.c | 22 +++++++------- drivers/gpu/drm/gma500/intel_bios.h | 4 +-- drivers/gpu/drm/gma500/intel_gmbus.c | 2 +- drivers/gpu/drm/gma500/psb_drv.h | 2 +- drivers/gpu/drm/gma500/psb_intel_drv.h | 2 +- drivers/gpu/drm/gma500/psb_intel_lvds.c | 4 +-- drivers/gpu/drm/gma500/psb_intel_sdvo.c | 26 ++++++++-------- drivers/gpu/drm/i915/display/dvo_ch7017.c | 14 ++++----- drivers/gpu/drm/i915/display/dvo_ch7xxx.c | 18 +++++------ drivers/gpu/drm/i915/display/dvo_ivch.c | 16 +++++----- drivers/gpu/drm/i915/display/dvo_ns2501.c | 18 +++++------ drivers/gpu/drm/i915/display/dvo_sil164.c | 18 +++++------ drivers/gpu/drm/i915/display/dvo_tfp410.c | 18 +++++------ drivers/gpu/drm/i915/display/intel_bios.c | 22 +++++++------- drivers/gpu/drm/i915/display/intel_ddi.c | 2 +- .../gpu/drm/i915/display/intel_display_core.h | 2 +- drivers/gpu/drm/i915/display/intel_dsi.h | 2 +- drivers/gpu/drm/i915/display/intel_dsi_vbt.c | 18 +++++------ drivers/gpu/drm/i915/display/intel_dvo.c | 14 ++++----- drivers/gpu/drm/i915/display/intel_dvo_dev.h | 2 +- drivers/gpu/drm/i915/display/intel_gmbus.c | 4 +-- drivers/gpu/drm/i915/display/intel_sdvo.c | 30 +++++++++---------- drivers/gpu/drm/i915/display/intel_vbt_defs.h | 4 +-- drivers/gpu/drm/i915/gvt/edid.c | 28 ++++++++--------- drivers/gpu/drm/i915/gvt/edid.h | 4 +-- drivers/gpu/drm/i915/gvt/opregion.c | 2 +- 27 files changed, 150 insertions(+), 150 deletions(-)