@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
- * Copyright (C) 2020-2023 Intel Corporation
+ * Copyright (C) 2020-2024 Intel Corporation
*/
#include <linux/firmware.h>
@@ -387,12 +387,15 @@ int ivpu_shutdown(struct ivpu_device *vdev)
{
int ret;
- ivpu_prepare_for_reset(vdev);
+ /* Save PCI state before powering down as it sometimes gets corrupted if NPU hangs */
+ pci_save_state(to_pci_dev(vdev->drm.dev));
ret = ivpu_hw_power_down(vdev);
if (ret)
ivpu_warn(vdev, "Failed to power down HW: %d\n", ret);
+ pci_set_power_state(to_pci_dev(vdev->drm.dev), PCI_D3hot);
+
return ret;
}
@@ -560,11 +563,11 @@ static int ivpu_dev_init(struct ivpu_device *vdev)
/* Power up early so the rest of init code can access VPU registers */
ret = ivpu_hw_power_up(vdev);
if (ret)
- goto err_power_down;
+ goto err_shutdown;
ret = ivpu_mmu_global_context_init(vdev);
if (ret)
- goto err_power_down;
+ goto err_shutdown;
ret = ivpu_mmu_init(vdev);
if (ret)
@@ -601,10 +604,8 @@ static int ivpu_dev_init(struct ivpu_device *vdev)
ivpu_mmu_reserved_context_fini(vdev);
err_mmu_gctx_fini:
ivpu_mmu_global_context_fini(vdev);
-err_power_down:
- ivpu_hw_power_down(vdev);
- if (IVPU_WA(d3hot_after_power_off))
- pci_set_power_state(to_pci_dev(vdev->drm.dev), PCI_D3hot);
+err_shutdown:
+ ivpu_shutdown(vdev);
err_xa_destroy:
xa_destroy(&vdev->db_xa);
xa_destroy(&vdev->submitted_jobs_xa);
@@ -628,9 +629,8 @@ static void ivpu_bo_unbind_all_user_contexts(struct ivpu_device *vdev)
static void ivpu_dev_fini(struct ivpu_device *vdev)
{
ivpu_pm_disable(vdev);
+ ivpu_prepare_for_reset(vdev);
ivpu_shutdown(vdev);
- if (IVPU_WA(d3hot_after_power_off))
- pci_set_power_state(to_pci_dev(vdev->drm.dev), PCI_D3hot);
ivpu_jobs_abort_all(vdev);
ivpu_job_done_consumer_fini(vdev);
@@ -1,6 +1,6 @@
/* SPDX-License-Identifier: GPL-2.0-only */
/*
- * Copyright (C) 2020-2023 Intel Corporation
+ * Copyright (C) 2020-2024 Intel Corporation
*/
#ifndef __IVPU_DRV_H__
@@ -90,7 +90,6 @@
struct ivpu_wa_table {
bool punit_disabled;
bool clear_runtime_mem;
- bool d3hot_after_power_off;
bool interrupt_clear_with_0;
bool disable_clock_relinquish;
bool disable_d0i3_msg;
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
- * Copyright (C) 2020-2023 Intel Corporation
+ * Copyright (C) 2020-2024 Intel Corporation
*/
#include "ivpu_drv.h"
@@ -75,7 +75,6 @@ static void ivpu_hw_wa_init(struct ivpu_device *vdev)
{
vdev->wa.punit_disabled = false;
vdev->wa.clear_runtime_mem = false;
- vdev->wa.d3hot_after_power_off = true;
REGB_WR32(VPU_37XX_BUTTRESS_INTERRUPT_STAT, BUTTRESS_ALL_IRQ_MASK);
if (REGB_RD32(VPU_37XX_BUTTRESS_INTERRUPT_STAT) == BUTTRESS_ALL_IRQ_MASK) {
@@ -86,7 +85,6 @@ static void ivpu_hw_wa_init(struct ivpu_device *vdev)
IVPU_PRINT_WA(punit_disabled);
IVPU_PRINT_WA(clear_runtime_mem);
- IVPU_PRINT_WA(d3hot_after_power_off);
IVPU_PRINT_WA(interrupt_clear_with_0);
}
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
- * Copyright (C) 2020-2023 Intel Corporation
+ * Copyright (C) 2020-2024 Intel Corporation
*/
#include <linux/highmem.h>
@@ -58,15 +58,12 @@ static int ivpu_suspend(struct ivpu_device *vdev)
{
int ret;
- /* Save PCI state before powering down as it sometimes gets corrupted if NPU hangs */
- pci_save_state(to_pci_dev(vdev->drm.dev));
+ ivpu_prepare_for_reset(vdev);
ret = ivpu_shutdown(vdev);
if (ret)
ivpu_err(vdev, "Failed to shutdown VPU: %d\n", ret);
- pci_set_power_state(to_pci_dev(vdev->drm.dev), PCI_D3hot);
-
return ret;
}
Always enter D3hot after entering D0i3 an all platforms. This minimizes power usage. Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> --- drivers/accel/ivpu/ivpu_drv.c | 20 ++++++++++---------- drivers/accel/ivpu/ivpu_drv.h | 3 +-- drivers/accel/ivpu/ivpu_hw_37xx.c | 4 +--- drivers/accel/ivpu/ivpu_pm.c | 7 ++----- 4 files changed, 14 insertions(+), 20 deletions(-)